Add Description on each port

Hi,
Though it might sounds stupid but I am wondering if there is anyway to dynamically add description of each port.
What I am trying to achieve is port 1 of Switch A is connected to Port 2 of Switch B.
I want to add description on port 1 of Switch A to provide the information of destination device like IP of the destination device or MAC address or name of the device (end device could be cisco switch or server).
I know how to hard quote the description of each port but the problem is down the raw   if someone change the up link port on switch B from port 2 to port 3 than description on port 2 would be invalid.
So I am looking for a way to get the Switch B (destination device) information(IP/MAC/ hostname/ etc) and plug it into description of port 1 of Switch A.
I am hoping there must be a way of doing this.
I need your help and expertise.
Thanks in advance

Hi Arshad,
Just to see what can be done,  I added the following text to my uplink port (port 10)  on my SG300-10P  ( ordering p/n SRW2008P-K9-NA)
"uplink to my UC520 [2001:1:1:1::300]" 
As you may or may not see from the screen shot below,  I am managing my SG300 switch via a IPv6 or a IPv4 IP address and added that information to the port description.
The text came up when I clicked on switch port 10.
Hope this helps,
regards Dave

Similar Messages

  • I am putting together a slide show using iphoto and I wanted to add a description on each slide/photo. How can I do that? Also on the choice of music for the silde show, if the slide show is longer than one song can you chose a different song for backgrou

    I am putting together a slide show using iphoto and I wanted to add a description on each slide/photo. How can I do that? Also on the choice of music for the silde show, if the slide show is longer than one song can you chose a different song for background music?

    This might help
    http://www.apple.com/findouthow/photos/#slideshow
    Regards
    TD

  • I also have a .csv file with the name of a jpeg in one column and a text description of each jpeg in a second column. Is there a way to automatically insert one jpeg (photo) and its corresponding text, each pair on one page, into a Indesign document?

    I also have a .csv file with the name of a jpeg in one column and a text description of each jpeg in a second column. Is there a way to automatically insert one jpeg (photo) and its corresponding text, each pair on one page, into a Indesign document?

    I would also recommend to write the description into the meta data. This would allow to place a text frame above the image and it is possible to add meta information and file name automatically together with the image, when you place it or even in a prepared template.
    Meta data information can be written easily in Bridge in the Meta File Workspace.

  • Add a for each script to loop through HTTPService?

    I'm using Flash Builder 4 with the Flex 4.1 SDK.  I want to add a "for each" script to loop through my HTTPService XML file so only each nepName displays only once in my dropdown list.  In my XML file I have multiple records associated with nepName.  I would like ALL the records associated with each nepName to populate in my datagrid when it is selected from the dropdown.  Currently in my dropdown there is a nepName entry for each XML tag.  I hope I was able to explain that well enough. I'll try to put my code below so you can see everything I'm working with.
    MXML:
    <?xml version="1.0" encoding="utf-8"?>
    <s:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
                   xmlns:s="library://ns.adobe.com/flex/spark"
                   xmlns:esri="http://www.esri.com/2008/ags"
                   xmlns:mx="library://ns.adobe.com/flex/mx" minWidth="955" minHeight="600"
                   creationComplete="nepInfo.send()">
        <s:layout>
            <s:VerticalLayout horizontalAlign="center" paddingTop="25"/>
        </s:layout>
        <fx:Declarations>
            <s:HTTPService id="nepInfo" url="http://www.epa.gov/owow/estuaries/nep_info.xml"/>
            <!--s:RadioButtonGroup id="optiongroup"/-->
        </fx:Declarations>
        <s:Panel title="NEP Project Information">
            <s:layout>
                <s:VerticalLayout/>
            </s:layout>
            <s:HGroup verticalAlign="middle">
        <mx:Form x="188" y="34" width="338">
        <mx:FormItem label="Search for NEP Information:">
        <s:DropDownList enabled="true" id="dropDownList" prompt="Select NEP" dataProvider="{nepInfo.lastResult.records.record}" labelField="nepName">
        </s:DropDownList>
        </mx:FormItem>
        </mx:Form>       
            </s:HGroup>   
            <mx:DataGrid id="resultsGrid"
                         dataProvider="{dropDownList.selectedItem}"
                         visible="{dropDownList.selectedItem != null}" x="20" y="62" width="1166" height="620">
                <mx:columns>
                    <mx:DataGridColumn dataField="projectName" headerText="Project Name" wordWrap="true"/>
                    <mx:DataGridColumn dataField="projectDescription" headerText="Project Description" wordWrap="true"/>
                    <mx:DataGridColumn dataField="acres" headerText="Acres" wordWrap="true"/>
                    <mx:DataGridColumn dataField="habitatDescription" headerText="Habitat Description" wordWrap="true"/>
                    <mx:DataGridColumn dataField="neportCategory" headerText="Habitat Category" wordWrap="true"/>
                    <mx:DataGridColumn dataField="restorationType" headerText="Restoration Type" wordWrap="true"/>
                    <mx:DataGridColumn dataField="leadPartner" headerText="Lead Partner" wordWrap="true"/>
                </mx:columns>
            </mx:DataGrid>
        </s:Panel>
    </s:Application>
    XML: http://www.epa.gov/owow/estuaries/nep_info.xml
    Thank you in advance for your help!
    -Alison

    ($file, pwd);Assuming "pwd" is meant as the current directory, here a small example :
    TEST@db102 SQL> create or replace procedure test_proc (p1 varchar2, p2 varchar2)
      2  is
      3  begin
      4     dbms_output.put_line (p1||' '||p2);
      5  end;
    TEST@db102 SQL> /
    Procedure created.
    TEST@db102 SQL> exit
    Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
    With the Partitioning, OLAP and Data Mining options
    $ ls -l /tmp/test/*.sql
    -rw-r--r--  1 ora102 dba  69 Apr 18 23:23 /tmp/test/file1.sql
    -rw-r--r--  1 ora102 dba 112 Apr 18 23:23 /tmp/test/file2.sql
    -rw-r--r--  1 ora102 dba 120 Apr 18 23:23 /tmp/test/file3.sql
    $ cat test_proc.sh
    DIR=/tmp/test
    cd $DIR
    ls *.sql | while read file
    do
            echo "Processing file $file"
            sqlplus -s test/test << EOF
    set feed off
    set pages 0
    set serveroutput on
    exec test_proc('$file', '`pwd`');
    exit
    EOF
    done
    $ ./test_proc.sh
    Processing file file1.sql
    file1.sql /tmp/test
    Processing file file2.sql
    file2.sql /tmp/test
    Processing file file3.sql
    file3.sql /tmp/test
    $

  • How to add description of a column of a table in SQL Azure

    Hi
    I have some tables in my application database where there are descriptions added against certain columns. Needless to say they were done by using sp_addextendedproperty.
    Now I am trying to migrate the Database to SQL Azure. SQL Azure does not support sp_addextendedproperty.
    Hence I am not able to figure out how to add descriptions to those columns.
    Any help would be much appreciated.
    Thanks
    Soumyadeb

    Hello,
    Just as Latheesh post above, Windows Azure SQL database are not support extended stored procedures. That’s one of the limitations on SQL database, and I don’t know there is another way to achieve the same on Azure.
    Regards,
    Fanny Liu
    Fanny Liu
    TechNet Community Support

  • I have albums in my iMAC with description for each photo that I can show up on slide show so that I know the place that is in the photo. If I synchronize my photos to iPOD, I am unable to get the Descriptions also copied. How do I ensure this?

    I have two questions:
    1) I have multiple logins in my iMAC. How do I move photos/albums from one login to another?
    2) I have created albums with "Description" for each photos, so that, in a slide show, any one can see what is being shown on the photo. When I sync albums to my iPOD, the "Descriptions" are not getting copied. How do I ensure that the "Descriptions" also get copied so that it can be a real back-up?
    Thanks

    Back up your iPhoto library, Depress and hold the option (alt) and command keys and launch iPhoto - rebuild your iPhoto thumbnails - this may take several tries
    Also what version of iPhoto? What recently changed?
    LN

  • In iPhoto slide show I want to add notes to each slide. Following the directions, I press VIEW but I don't see "Show Notes". How do I do it?

    In iPhoto slide show I want to add notes to each slide. Following the directions, I press VIEW but I don't see "Show Notes". How do I do it?

    hello louise, the firefox button will only be displayed in case the menu bar is hidden (''view > toolbars''), but you can access the options through ''tools > options'' as well in order to set a custom homepage...
    [[How to set the home page]]

  • I have got two photos by mail from iPhoto. My friend has put descriptions in the description field. The I got the mail I saw the description below each photo. If I check the photos with Preview they have Exif and JFIF fields but no IPTC field.

    I have got two photos by mail from iPhoto. My friend has put descriptions in the description field. The I got the mail I saw the description below each photo. If I check the photos with Preview they have Exif and JFIF fields but no IPTC field.

    Does you friend use any accented letters in the descriptions?  That might cause it but I don't know for sure.
    Has he run any repair operations on his library, i.e. repairing the database file? Another possible fixe that's easy to apply is the following:
    1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
        Home/Library/ Preferences folder.
    2 - delete iPhoto's cache folder(s):
    Home/Library/Containers/com.apple.iPhoto
    and, if there is one, the
    Home/Library/Caches/com.apple.iPhoto folder
    3 - reboot, launch iPhoto and try again.
    NOTE: In Lion and Mountain Lion the Home/Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and press the Return key - 10.7: Un-hide the User Library folder.
    For  Mavericks, 10.9,  go to your Home folder and use the View ➙ Show View Options menu to bring the this window:
    The demo version of GraphicConverter can be used to view/check/edit the ITPC fields in an image file after exporting.

  • Need help Setting up Multiple Static Ip , 1 for each port of the fios router

    Need help Setting up multiple Static Ip on my fios router
    I have been trying to figure out how to set up multiple ip in my fios router.
    However I kind of managed how to set up multiple static ip However the way I want it is for each port of my router to have an external ip signed to it. ( like 4 different modem in 1 )
    Verizon gave me 5 static ip but they can not help me how to set it up.
    Have anyone here done more then one static ip on different ports? I assume that the process will be the after the second static ip.

    You want to set up Static Nat. You will not assign the IP to a port, but rather to a local machine. Figure out what machines you want your IP's to go to. Under the firewall section you will see static nat. Pick the machine you want and enter one of the IP's you were assigned.

  • HR - have to add description for the customised field in infotype 4118.

    I need to add description for the customised field in info type 4118 in HR module.

    hi,
    for HR infotype go to tansaction  PM01 .
    OPEN YOUR INFOTYPE . ADD YOUR COSTOMIZING FIELD . 
    also see these links
    http://www.sapdevelopment.co.uk/hr/hrhome.htm
    See:
    http://help.sap.com/saphelp_46c/helpdata/en/4f/d5268a575e11d189270000e8322f96/content.htm
    sites regarding hr-abap:
    http://www.sapdevelopment.co.uk/hr/hrhome.htm
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PAPA/PAPA.pdf
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PAPD/PAPD.pdf
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PYINT/PYINT_BASICS.pdf
    http://www.atomhr.com/training/Technical_Topics_in_HR.htm
    http://www.planetsap.com/hr_abap_main_page.htm
    You can see some Standard Program examples in this one ...
    http://www.sapdevelopment.co.uk/programs/programshr.htm
    http://searchsap.techtarget.com/originalContent/0,289142,sid21_gci1030179,00.html?Offer=SAlgwn12604#Certification
    http://www.erpgenie.com/faq/hr.htm.
    http://www.planetsap.com/hr_abap_main_page.htm
    http://www.sapbrain.com/TUTORIALS/FUNCTIONAL/HR_tutorial.html
    These are the FAQ's that might helps you as well.
    http://www.sap-img.com/human/hr-faq.htm
    http://www.sapgenie.com/faq/hr.htm
    http://www.planetsap.com/hr_abap_main_page.htm
    http://www.atomhr.com/library_full.htm
    HR Long texts Upload
    Look at the below link
    BDC - hr maintain text
    HR
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PAPA/PAPA.pdf
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PAPD/PAPD.pdf
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PYINT/PYINT_BASICS.pdf
    http://www.atomhr.com/training/Technical_Topics_in_HR.htm
    http://www.planetsap.com/hr_abap_main_page.htm
    you can see some Standard Program examples in this one..
    http://www.sapdevelopment.co.uk/programs/programshr.htm
    http://searchsap.techtarget.com/originalContent/0,289142,sid21_gci1030179,00.html?Offer=SAlgwn12604#Certification
    These are the FAQ's that might helps you
    http://www.sap-img.com/human/hr-faq.htm
    http://www.sapgenie.com/faq/hr.htm
    http://www.erpgenie.com/faq/hr.htm.
    www.sap-img.com
    http://www.planetsap.com/hr_abap_main_page.htm
    http://www.sapbrain.com/TUTORIALS/FUNCTIONAL/HR_tutorial.html
    http://www.sapfans.com/forums/viewtopic.php?p=498530&sid=d7ec5866e3fb26880da129de45ce79de
    http://www.sapcookbook.com/preview_hr_questions.htm
    http://www.atomhr.com/library_full.htm
    http://www.sapdevelopment.co.uk/hr/hrhome.htm
    http://www.planetsap.com/hr_abap_main_page.htm
    http://expertanswercenter.techtarget.com/eac/knowledgebaseAnswer/0,295199,sid63_gci983590,00.html
    http://www.allsaplinks.com/HRmaterial.html
    http://www.allsaplinks.com/timemanagement.html
    http://www.allsaplinks.com/payrollcompletefunctional.html
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/HRINF/HRINF.pdf
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PYXXFORM/PYINT_FORMBUILDER.pdf
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCBMTWFMPA/BCBMTWFMPA.pdfhttp://help.sap.com/printdocu/core/Print46c/en/data/pdf/MYSAP/SR_HR.pdf
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PAPA/PAPA.pdf
    Re: New to ABAP HR Programming
    http://www.planetsap.com/hr_abap_main_page.htm
    Reward points if useful.
    REGARDS ,
    PANKAJ

  • Add Descriptive felx fields

    Hi All:
    I want to add descriptive flex fields in RA_CUSTOMER_TRX_LINES_ALL table
    but when I go to the Descriptive Flexfiled Segments all the items include title column is disabled.
    Please advice me at your earliest convenience.
    Regards
    Zeeshan

    Is this a PL/SQL and/or SQL question? Or does this relate to some module of the Oracle Applications suite (or one of the other application suites Oracle has purchased, like PeopleSoft or Siebel)?
    If you're asking a question about the latter, I'd suggest asking in the appropriate forum for the particular module this table relates to. If you're asking about the former, you'll have to explain what "flex field" means in terms of SQL or PL/SQL...
    Justin

  • HT4522 Sounds fine but how do I add partitions in air port utility

    Sounds fine but how do I add partitions in air port utility

    It is possible to partition the drive, but you have to physically pull the hard drive from the Time Capsule and place it in a separate enclosure for the formatting operation, then reinstall the drive again back in the Time Capsule.
    Unfortunately, in addition to a lot of work, this will void the warranty on the Time Capsule.
    It is possible to create one or more disk images on the Time Capsule using Disk Utility.
    While a disk image is not technically a "partition" in the normal sense, it will allow you to specify and reserve a given amount of space on the drive for the image or images that you create.

  • How an Ethernet switch creates a collision domain on each port?

    Hi , 
    How an  Ethernet switch creates a collision domain on each port?
    Thanks 

    Disclaimer
    The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
    Liability Disclaimer
    In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
    Posting
    A switch port running in half duplex is basically the same as any other two hosts running half duplex between them.  When either host transmits, each has a chance to collide with a transmission from the other host.
    As frames between switch ports are buffered, hosts on two different ports, even if they transmit at the same time, won't directly collide.  Again, though, if port is running half duplex, host can collide with switch port retransmitting the other host's traffic.  I.e. two hosts, on two different ports, behave (practically) as if they were directly connected.  The advantage of a switch, however, is another two hosts transmitting to each other won't collide between the two pairs, as they would on a hub.  I.e. on a hub A<>B frames may collide with C<>D frames, but they shouldn't on a switch.
    If host ports are running in full duplex, there should be no collisions at all (which would also be true with a pair of hosts on a full duplex wire between them).
    NB: above is just for unicast when switch "knows" destination MAC's port.

  • In numbers '09, I have 24 numbers and want to add 89 to each, with 24 distinct results. How?

    In numbers '09, I have a column of 24 numbers and want to add 89 to each, with 24 separate results in a new column. How?

    HI t,
    Assuming the numbers are in column A, starting at A2, and that you want the results in column B, and in the same row as the original numbers:
    B2: =A2+89
    Fill down for 24 rows to B25.
    To fill down:
    After entering and confirming the formula in B2,
    Select cell B2.
    Shift-click on cell B25 to add it and all cels between it and B2 to the selection.
    Go Insert (menu) > Fill > Fill Down.
    Done.
    Regards,
    Barry

  • OK , I have my instructional coaches creating power point presentation add audio to each slide with the presenter 10 add ins. I need these presentation converted into MP4 like you can do with adobe presenter video creator.

    Love the Adobe products first. OK , I have my instructional coaches creating power point presentation add audio to each slide with the presenter 10 add ins. I need these presentation converted into MP4 like you can do with adobe presenter video creator.

    If you import the PPT deck into Captivate it will not bring the audio from Presenter. But you can import it into Captivate after the slide deck has been imported. The audio files aren't necessarily named in a logical fashion in the source files for the presentation, so I would recommend that you publish the presentation locally and then find the 'data' folder in the published output and the audio files will be named in a way that you can infer the slide they are associated with. Not the simplest proceedure but it should be pretty painless.

Maybe you are looking for