Add emil functionality to Report Painter
Hi all,
It is tough to explain my requirement but I i am doing my best to make it clear!!1
We have Transaction ZZ007A which calles Report writer Program
My requirement is to add emil functionality to send these reports to clients.
We have one of selection parameter is Profit center Group. I need to call this transaction separately for all profit centers under this grouo and email report to correspndant profit center.
This Report is not ABAP, it is report writer.
How can I do this?
Cheers
Shiva
Title was edited by:
Alvaro Tejada Galindo
Hi
You have to download the out[ut and to send the output file as mail to others.
because you can't write code to send mails in the report painter/writer reports.
check the links
Report Writer functions can be accessed from within the Report Painter.
The difference lies in the GUI of the report painter.
For Report Painter
http://help.sap.com/saphelp_47x200/helpdata/en/66/bc7d2543c211d182b30000e829fbfe/content.htm
For Report Writer
http://help.sap.com/saphelp_47x200/helpdata/en/66/bc7dc143c211d182b30000e829fbfe/content.htm
Refer the following links :
http://www.virtuosollc.com/PDF/Get_Reporter.pdf
http://sap.ittoolbox.com/groups/technical-functional/sap-r3-other/accessing-tables-using-report-painterwriter-98766
http://help.sap.com/saphelp_47x200/helpdata/en/da/6ada3889432f48e10000000a114084/frameset.htm
http://help.sap.com/saphelp_bw31/helpdata/en/66/bc7d2543c211d182b30000e829fbfe/frameset.htm
Regards
Anji
Similar Messages
-
How to add new fields in report painter without library
Hi,.
I have to add new fields in report painter(std one) which is not in any library and so I am not able to add the fields in characteristics. Though I have added zfields in CCR1S but I am not able to add these fileds in characteristics in report painter(say - CJe3 t-code)
How to procedd for this.
Thanks,
MOhanhi,
first i copied the report 12KST1G in my Y12KST1G with form. In CJE2 when i Click this report then in the whatever fields coming in the characteristics we can put it in 'variables' tab and these will be the fields which is displayed on the selecton screen. So after doing the wbove changes in the exit , I am not able to get the fields in characteristics vale so that I can put it in variable. or do we have to do some chnages in the screen for this z report which is like std. one.
FYI..The display of the fields was done in z-report with library but this is like a report without library and we did some chnages in the exit.
Pls Suggest -
How to add new column in report painter
Hi Experts,
I want to add new column in report painter which as to calculate the previous column . value in the new column should be the precentage of previous column existing on left side...HI Pradeep,
Goto the transaction code (Change Report) GR32.
Give you library name and report name
And click on the column (application tool bar or F7) button then place the curser on the screen where you want column (please note you have to keep curser on the header section u2013Red column text) right click and insert element. Then you select formula as selection element and enter. You will get the enter formula box. Then you can type your formula and continue. This will add new column to the report.
How to enter formula: you can see the formula components in that id and description.
Id is columns that are present and description indicates explanation of that column.
Enter formula according your requirement.
Examples:
Enter formula screen:
ID : des
X001 amount
X002 pt000
X003 test
1. Enter formula as: ( X001 u2013 X002)
The above formula is for fist column u2013 second column.
2. ( ( X001 u2013 X002) / X003) * 100
First column u2013 second column and devide by third column after that multiple with 100.
Hope this will help you
Regards
Manohar -
How to add Custom code in Report Painter
Hi All,
I have a requirement to add Authorization checks at Profit Center Level for 8A-PCA001G report. This is the first time am working on Report Painter/Writer. I am wondering whether i can add custom code or not. Please suggest me how to do this. I copied 8A-PCA001G into a zreport but did not find anywhere to add custom code.
Any help would be really appreciated.
Thanks,
KumarHi Kumar,
You cannot write custom code (0% coding) in an Report Writer/Painter report. The code is generated by SAP while generating the Report group. The only place in a report writer report where you can write very minimal code is at varables level or formulas inside reports.
At the report group header level, there is provision to provide authorization group. Try that.
Regards,
Subin John.
Edited by: subin john on Mar 24, 2011 10:36 AM -
How to add new Characteristic in Report painter?
Hi All,
My requirement is Create/Modify a Report in Report Painter/Writer which should generate cost information in Controlling Area Currency for all sites (domestic & international) associated to the Project. Earlier same Report is fecthing Object Currency Values for the given Project.
When i tried to add "Controlling Area currency" in place of "Object Currency" characteristic, then from the available characteristics of the FORM/Report, i am unable to find the "Controlling Area urrency".
Please let me know how to get this "Controlling Area currency" characteristic.
Note: This Report is intially developed in Report painter So no ABAP code is present , So People who knows Report painter/Report Writer concepts with Currency translations can helpme out.
Please do the needful as i am new to Report Painter please Give T-codes and any useful links regarding this Multiple Currency handling /Currency conversion concepts of Report Painter.I am designing the P&L report and I want to split my R&D expenses split down by Internal Orders. Since, I have not seen Internal order field in summary table of new GL..ie., FAGFLEXT table.
I want to know how this can be achieved in the same report in report painter.
I am talking this issue from Report Painter point of view where each report is based on library , which is defined per summary table.(ie., Library can refer to only one table....finding it odd to believe there is no join in reporting tool).....
Thanks and let me know if you want to know more on the issue I am facing. -
GRCT HOW TO ADD Z TABLES IN REPORT PAINTER
Hi Gurus
Could you please send me information about how to activate z tables in report painter ? someone said me that i can user transaction GRCT to do that...¿ what aspects must I consider to add a table ?
mail: [email protected]
Regards
Andrés Morenohi Andres,
below are the steps for the Report Painter.....
Create a new report.
Menu Path: Information Systems > Ad hoc reports > Report Painter > Report > Create
On the Report Painter: Create Report screen, enter:
Library 1VK
Report RSS-A
Report Description Report w/Total Row
Hit <Create> button to move to the next screen.
Create the Rows of the Report The first four rows are cost element characteristics
Screen: Report Painter: Create Report
Type Cost Elements in the lead column cell
Double click on Row 1
In the Pop-up window 'Element definition: Row1", enter:
Note: If Pop-up window (select element type) appears, choose 'characteristics' and hit <Enter>.
Select 'Cost Element' as the characteristic in the 'Available characteristics' section
Hit <Move selected to left> button to move the characteristic 'Cost element' to the 'Selected characteristics' section
From 430000
Hit <Change short, middle and long texts> icon (at the bottom of the window)
In the Pop-up for Enter Texts, Enter:
Short Description from Table above for this Account
Click on the <Copy short text> button to copy this description to the other fields.
Hit <Confirm> to close the Pop-up
Hit <Confirm/Enter> to check consistency and close.
Repeat the above steps for the other 3 accounts
Create a formula row to calculate the total of the Cost Element rows
Screen: Report Painter: Create Report
Double click on Row 5 or the next empty row.
In the Pop-up for Select Element Type select 'Formula'
Hit <Enter> to close the Pop-up
In the Pop-up 'Enter Formula'
Use the calculator buttons to create the formula Y001 + Y002 + Y003 + Y004
Hit <Enter> to close the Pop-up
In the Pop-up 'Enter Texts'
Short Total
Click on the <Copy short text> button to copy this description to the other fields.
Hit <Enter> to close the Pop-up
Make sure your cursor is in the cell containing the word Total
Follow the Menu Path: Formatting > Row
In the Pop-up 'Row Formatting'
Overscore checked
Underscore checked
Hit <Enter> to close the Pop-up
Create the first column for actual costs
Screen: Report Painter: Create Report
Double click on the Column 1 cell.
In the Pop-up 'Select element type'
Select Predefined Key Figure radio button, and press <Enter>.
In Pop-up 'Choose predefined column'
Select Actual Costs as the predefined column, and press <Enter>.
In the Pop-up 'Element definition: Actual costs'
Press <Confirm> to check consistency and close.
Define the second column for plan costs
Screen: Report Painter: Create Report
Double click on the Column 2 cell.
In the Pop-up 'Select element type'
Select Key Figure with Characteristics as the element type, and press <Enter>.
In the Pop-up 'Element definition: Column 2'
Value Type 01 (Plan)
Version 0 (Actuals)
Valuation 0 (Legal valuation)
Hit <Change short, middle and long texts> icon
In the Pop-up for Enter Texts, Enter:
Short Plan
Click on the <Copy short text> button to copy this description to the other fields.
Hit <Confirm> to close Pop-up.
Hit <Confirm> to check consistency and close.
Create a formula column to calculate the variance between actual and plan costs
Screen: Report Painter: Create Report
Double click on the Column 3 cell
Assign the points....
Ranjit -
Trying to add new columns to Report painter Report
Hi Experts,
I created a report painter report by copying an already existing report. In addition I wanted to add extra columns to this report but after adding a few and coming to the last page of the existing report when i try to add a new column the system gives me an error message
Insufficient space on current page -> moving not possible
Message no. KH581
As this is the last page, I am not able to add extra columns to this report. How can I go to the next page and add columns to this existing report. Your responses are highly appreciated.
Regards
ASLVHello,
This is a constraint in the system.
The solution maybe is to define narrower columns
because there is a hard restriction in ABAP to have at least 255 digits
on one page.
The message KH581 is processed because there is not enough space left
on the first horizontal page. So if you first add a new horizontal page
you can add the new column on the second page. Also if you decrease the
column width of the columns to get more space left on the first page you
can add the new columns.
I hope it helps.
REgards,
REnan -
Get Error After Add GL Account In Report Painter
Dear All,
I had add GL code into 2 reports (Cash Flow - Income Statement and Cash Flow - IPC Income Statement) but when I want to execute those reports in the report tree, it come out an error "In element OTHER EXP Jan the system adds quantities and values or different currencies."
May I know how to solve this problem?
Hope will get reply soon, rewards point will be given
[Financial Statement Version|http://www.picoodle.com/view.php?img=/4/4/7/f_FSE2m_f881d78.jpg&srv=img32]
[Report Painter|http://www.picoodle.com/view.php?img=/4/4/7/f_reportPaintm_0d1dd9a.jpg&srv=img29]
[Error Message|http://www.picoodle.com/view.php?img=/4/4/7/f_msgLongm_d25d1db.jpg&srv=img30]Solved. TQ
-
How to add external call from Report Painter
Hi experts,
I'm working on a report painter, and I need to do an external call, from the generated code.
add something like this PERFORM Z_CALCULO_IMPORTE_COMPENSADO(ZCASS_FFMRBCS)
USING CUR-TAB
Is there any way to do it without an SSCR key?
Thanks in advanceHI Pradeep,
Goto the transaction code (Change Report) GR32.
Give you library name and report name
And click on the column (application tool bar or F7) button then place the curser on the screen where you want column (please note you have to keep curser on the header section u2013Red column text) right click and insert element. Then you select formula as selection element and enter. You will get the enter formula box. Then you can type your formula and continue. This will add new column to the report.
How to enter formula: you can see the formula components in that id and description.
Id is columns that are present and description indicates explanation of that column.
Enter formula according your requirement.
Examples:
Enter formula screen:
ID : des
X001 amount
X002 pt000
X003 test
1. Enter formula as: ( X001 u2013 X002)
The above formula is for fist column u2013 second column.
2. ( ( X001 u2013 X002) / X003) * 100
First column u2013 second column and devide by third column after that multiple with 100.
Hope this will help you
Regards
Manohar -
Add in Library for Report Painter/Writer 9PCC
Hi SAP,
I need to include in Library for Report Painter/Writer the component 9A2 CO-OM-IS-BP Business processes: Special reports because I need to run 9PCC, but 9PCC don't exist in my system.
Would I like know if it exist the SAP note include in Library?
Best regards,
Edited by: Fabio Gil on Jul 1, 2010 6:35 PMHi,
You can create a library via GR21 transaction. What tables do you want to join? Depending on this, one can tell whether it's possible or not.
You can search for available info on the forum; similar questions were already asked.
Regards,
Eli -
Amount auto add 100 amount in report painter when I upload budget from KP06
Hi expert,
Would like to seek help, I wonder why the report painter (GRR1) display the amount by all cost element adding 100 for the budget when I upload budget KP06?
Please help.
Thank you.
Regards,
KarenHi,
Thank you for the prmpt reply.
However the link is not working, between would like to seek for your help to advice query as below:
Hi,
Thank you for the promt reply.
1) How I include the variable in the column header to display fiscal year which I have selected from the selection screen?
which variable should i use?
2) Where can i find more information about the characteristic and which variable to be use base on the characteristic?
For example: I would like to display the fiscal year from the selection screen/input screen when execute the report which also will reflected to the element definition and will display the fiscal year also in the column text?
3) Kindly advise base on question 2, the variable that i use in element definition it will also display in selection screen?
4) When execute the report the first selection screen input parameter it obtain from where it is from element definition?
5) Please advice how to be done when report execute with first screen input selection will also reflect the element definition of column and rom with the selection of the fiscal year?
Please help.
many thanks -
Exporting and Importing functionality of report painter
Hi all,
I have a requirement where in the Reports that have been created using the Report Painter in Legacy SAP system has to be replicated in a fresh SAP system. Is it possible or manual replication is the only way to go ahead?Check also transport option, as in How to copy Repository Objects between non-connected SAP systems.
Regards,
Raymond -
How to add a column in report painter
Hello
i have a profit centre report where i have the profit centre group name in the header and i want to move it to column.
could you please let me know how to do this?
ThanksHI Pradeep,
Goto the transaction code (Change Report) GR32.
Give you library name and report name
And click on the column (application tool bar or F7) button then place the curser on the screen where you want column (please note you have to keep curser on the header section u2013Red column text) right click and insert element. Then you select formula as selection element and enter. You will get the enter formula box. Then you can type your formula and continue. This will add new column to the report.
How to enter formula: you can see the formula components in that id and description.
Id is columns that are present and description indicates explanation of that column.
Enter formula according your requirement.
Examples:
Enter formula screen:
ID : des
X001 amount
X002 pt000
X003 test
1. Enter formula as: ( X001 u2013 X002)
The above formula is for fist column u2013 second column.
2. ( ( X001 u2013 X002) / X003) * 100
First column u2013 second column and devide by third column after that multiple with 100.
Hope this will help you
Regards
Manohar -
Add profit center in report painter
Hi to all,
I I have a small requirement in FICO.We added a one profit center in one report in FGI5 tcode.Is it enough for that report or anything to add to this report , i.e is there any modifications in coding or can i proceed with the transport.
Wating for ur reply.
Thanks & regards,yes that is enough..u have changed the form.....that will get displayed...but u have to find to which report that form is assign
in fgi3 tcode u can c the report name and from name there also u have to change........
Reward IF...............
Regards
Anbu
Edited by: Anbu B on Jul 14, 2008 7:57 AM -
Suppress 'SAVE' functionality on Report Painter/Writer Report
On the R/3, end-user side, is there a way to suppress the menu bar (Report, Edit, Goto, Extras, etc.) and the 'Save' icon? Our end users are able to change the definition and layout, then 'Save' and it messes-up the report for other users. I'd like to know if this can be accomplished on the Report Writer/Painter configuration side without code. Thank you.
Hi bill,
i have never tried this but the menu bar can be changed/hidden with
a transaction and a screen variant.. tcode wud me shd0.
howver go thru this link for better ref..
http://help.sap.com/saphelp_47x200/helpdata/en/67/232037ebf1cc09e10000009b38f889/frameset.htm
hope this helps u a bit,
all the best,
regards,
sampath
mark helpful answers
Maybe you are looking for
-
Pasword Manger does not work with IE8 64-bit edition
Recently I upgraded my IE7 to IE8 and decided to try 64-bit version. Everything works perfectly except Pasword Manager which does not supply paswords for logins anymore. Has anybody ecnountered this problem and found a solution? ThinkPad T500 2242-CT
-
System and Object privileges question
hello everyone. I was really making it a priority to really understand both system and object privileges for users. I have setup a couple of 'sandboxes' at home and have done lots of testing. So far, it has gone very well in helping me understand all
-
1 . Everytime I open flash it always say my license had expired so im thinking 1,000 dollars for flash for 3 months I unistall it and It still show FLV videos I double click it again and it says the same message I don't get it I uninstalled it alread
-
Recently i install a plugin in my final cut 7, now want to remove it but i don't know how , the name of this one is FxFactory i need some help thanks.
-
Integrating Data From ECC to CRM
Hi Experts, My requirement is, After Updating the Material master data in ECC , the same updated data is integrated with the corresponding data of the Product Master in CRM. Problem: to map the data from ecc to CRM , I am supposed to call this RFC