Add External Supplier from a Vendor List

Hi;
Iu2019m trying to create a vendor list.
The list should appear in SRM portal in u201CStrategic Purchasingu201D u2013 u201CBusiness Partneru201D u2013 u201CCreate business partner: Supplieru201D u2013 u201CAdd external Supplier fromu201D.
My u201CList of Vendorsu2019u201D data is:
Technical Type of Service: HTML
Logical system: SRM;
Path for Symbol for Service: http://.../sap/bc/bsp/sap/ros_prescreen?sap-client=010
In Standard call structure we have:
1                            http://.../sap/bc/bsp/sap/ros_prescreen?sap-client=010     0 URL
2     username                     projecto                          2 Fixed Value
3     password          projecto                                     2 Fixed Value
4     HOOK_URL                                    4 Return URL
5     ~OkCode                     ADDI                          2 Fixed Value
6     ~target     _     top                          2 Fixed Value
7     ~caller          CTLG                          2 Fixed Value
Do you have any idea what is missing or wrong?
Thanks;
Marta Marques.

Hi Martna
please see the below link Parab's check list on ROS.Thanks parab it was a good expalnation on ROS with ros grammer syntax.
you may use client also a different parameter in call structure.
Re: Error installing CE Evaluation April 2007
Web Service ID : ROS
Description: External Web Service in EBP
Bus Type of a Web service : List of Vendors
Display Partner Data again in Vendor List : X
Vendor Root Node : 50000620 (this is Vensor Root node in EBP client)
Use Error Log : X
Use HTTP GET to call Web Service : <blank>
Codepage of Service: <blank>
Techinical type of Service : <Blank>
Logical system : SRDCLNT310 (this is ROs client from there supplier will be transfered)
Path for symbol for service : <blank>
Standard Call Structure Parameter setting as follows
1. <blank> http://....ros_prescreen/main.do URL
2. sap-client 310 fixed_value
3. sap-username dineshp fixed_value
4. sap-password GAJANAN fixed_value
5. HOOK_URL <blank> Return_URL
6. ~OkCode ADDI fixed_value
7. ~target top fixedvalue
8. ~caller CTLG fixed_value
Also defined ROS external web service as default CAT attribute in the organization setting.
BBP_MARKETP_INFO table entry in EBP client.
Hope it helps to configure ROS in define webservices.
regards
Muthu

Similar Messages

HT1459 How do I add a song from my iTunes list to my iPod?

How do I add a song from my iTunes list to my iPod?

Hi 3863brisban!
Here is an article that can help you with this stated goal:
iTunes: Syncing media content to iPod
http://support.apple.com/kb/ht1351
Thanks for using the Apple Support Communities. Have a good one!
-Braden

How to add external call from Report Painter

Hi experts,
I'm working on a report painter, and I need to do an external call, from the generated code.
add something like this    PERFORM Z_CALCULO_IMPORTE_COMPENSADO(ZCASS_FFMRBCS)
                                                                                USING CUR-TAB
Is there any way to do it without an SSCR key?
Thanks in advance

HI Pradeep,
Goto the transaction code (Change Report) GR32.
Give you library name and report name
And click on the column (application tool bar or F7) button then place the curser on the screen where you want column (please note you have to keep curser on the header section u2013Red column text) right click and insert element. Then you select formula as selection element and enter. You will get the enter formula box. Then you can type your formula and continue. This will add new column to the report.
How to enter formula: you can see the formula components in that id and description.
Id is columns that are present and description indicates explanation of that column.
Enter formula according your requirement.
Examples:
Enter formula screen:
ID :    des
X001 amount
X002 pt000
X003 test
1. Enter formula as: ( X001 u2013 X002)
The above formula is for fist column u2013 second column.
2. ( ( X001 u2013 X002) / X003) * 100
First column u2013 second column and devide by third column after that multiple with 100.
Hope this will help you
Regards
Manohar

PerformancePoint Designer is not loading when clicking on "Add new item" from PerformancePoint Content List

Hello,
I am using Internet Explorer 9 to create a new item by launching Performance Point Dashboard Designer from browser.
When i click on "Add new item", an Iframe will open showing dashboard design redirect which keep loading for couple of minutes and the designer never opens.
Yes, there are working workarounds like opening these links in other tab or opening dashboard designer directly or by clicking on "Run Dashboard Designer" from BI Center homepage.
However, Can someone please help me how to get designer opened when "Add new item" has been clicked from PerformancePoint Content List from browser?
Thanks in advance.
NKV Prasad Panthangi

An Update :
I found this is due to the browser limitation.
I have downgraded my Internet Explorer Browser to IE 8 and did the following changes in my browser settings.
Tools --> Internet Options --> Navigate to Security Tab --> Click on Custom Level Button --> Under Download --> Select "Enable" radio box for Automatic Prompting for File Downloads.
Sadly, I cannot ask users to downgrade their browser to IE 8 because MS already stopped support for this browser and there are no other solution for this except going by workarounds.
This clearly says why people are moving away from PerformancePoint Services in SharePoint.
Thanks
NKV Prasad Panthangi

I can not add or delete from my wish list. What am I doing wrong?

I can not add or delete from my I Tunes wish list. What am I doing wrong?

The IOS is old - 4.2.1
I have always been able to edit but not now.
My mail, contacts and calendar are on Optimum ( it is telling me accounts are currently syncing.
When I connect to my computer I tunes doesn't show my device even when my ipod is connected.

Add ROS Supplier from OPI to RFx

Hi All,
I am trying to add bidders in RFX through registered vendors from ROS via OPI. After the registerd vendor is transferred in the RFx and we click on check button sometimes the system throws an error *'Bidder is not released'.*I checked the Manage Business partner in portal and the Bidder details for some of the Bidders show 'Not released' which cannot be changed in edit mode.
Any suggestions on how I can release the bidders created to publish the RFx.
Regards,
Neeraj

Hi Neeraj,
"Bidder is not released" problem is encountered when a Business Partner for that particular vendor has not been created in SRM. Thus this vendor remains in the "unreleased" state even in ROS. Once a BP is created for this vendor in SRM, the same vendor gets the status -'released' in ROS too.
Regards,
Nikhil

Is it possible add or remove contact from a Shared list via API?

Hi Eloquan,
i'm preatty new in Eloqua and i'm wondering if is possible add/remove contact from a Shared list via API...
any help will be welcomed.
M.

Gr8 not a problem why do you use a composite view pattern.
--->In that case make use of Proper patterns in your design before forwading it to a view.
---->Use a Public JSP Statically include JSP's in WEB-INF folder using static page include which happens at compile time.
REGARDS,
RaHuL

Backend Contract in Vendor List

Hi All,
I have created a quantity contract in my R/3 backend which has the price specified, the contract is against a material group and no material code is specified.
I have assigned the contract number and item number along with the backend system reference to the vendor line in the vendor list for the same product category as specified in the contract.
When I create a "describe requirement" shopping cart for the product category and go to the Source of Supply tab I can see the contract reference for the vendor. However after assigning the vendor I get information message
"The price from the contract/info record is determined on ordering "
and have the following information on the source of supply tab
Vendor                   - Vendor name correctly specified
Contract / Item        - Contract nuumber and item number correctly specified
Purchasing Info Rec - Blank which is correct
Price                      - 0.00 GBP the price specified in the contract item is 525 GBP
Per                        - 1 Each which is correct
Is it possible for the price in the shopping cart to be updated based on the backend contract price as standard?
Cheers
Chris

Hi
I undersatnd that you have mentioned your backend contract in vendor list and it picks contarc but not a price. Please try contract without assigning to the vendor list .
As per general SRM
Automatic Price Determination in Shopping Cart
Priorities
Contract -Highiest priority
Catalog
Vendor Price
Product Price - Lowest priority
Existing Vendor Lists should be considered as well !
Are you getting source of supply like contract /info record entry hope that there no gray. i never tried this..but it is good try..
Source of Supply
cross check vendor list was activated..
regards
Muthu
Edited by: Muthuraman Govindasamy on Sep 8, 2008 1:16 PM
Edited by: Muthuraman Govindasamy on Sep 8, 2008 1:35 PM
Edited by: Muthuraman Govindasamy on Sep 8, 2008 1:48 PM

Question on Vendor List?

Hi Friends
1 If we are doing sourcing via vendor list, do we need to define sourcing-def sourcing for product categories and select sourcing always carried out.
2. is sourcing via vendor list done for external requirements only or can consider local requirements. That is SC sent to sourcing and sourcing to be done via VL.
Regards
Simha

Hi Simha,
1.It is not mandatory to define sourcing always carried out in customising to utilise vendor list as a source of supply.
2.Vendor lists can be used for local and external requirements also.
Please through this link for better understanding.
http://help.sap.com/saphelp_srm50/helpdata/en/43/15a4e228b62d23e10000000a1553f7/frameset.htm
Thanks,
Koushik.

Vendor list and preferred vendor

Hi,
We are using classic scenario and currently, all carts are intercepted by the purchasing department so purchase requisitions are manually converted into POs.
We want to implement vendor lists but SRM assigns any vendor chosen from a vendor list as fixed, which means it will convert to a PO once the shopping cart is fully approved.
Is there a BADI I can use to change the vendor from 'Fixed' to 'preferred'. Can BBP_DOC_CHANGE_BADI be used to do so or does it only works when changing a 'preferred' vendor into a 'fixed' vendor?
Thanks

Hi
Yes... we have done this long back successfully..
The BADI - BBP_DOC_CHANGE_BADI can be easily used...
Also, you can look for BBP_SOS_BADI...
Do let me know, incase you face any problems.
Regards
- Atul

Add new contact from Recent no longer working

I was in the process of adding a contact from my Recent Calls list. Another call came in, so I took it. When I went back to complete the process, the contact add screen was gone.
Now, after multiple shutdowns and restarts of the phone, I can't add a contact from my recents list. It's as if partially entered screen is lurking in the background, and until I complete it, it won't give me a new screen to fill out for another number. (This is my interpretation of the issue.)
Anyway, when I click on the Create New Contact or Add to Existing Contact buttons after hitting the arrow to the right of the number in the list, nothing happens. The text and call buttons still work.
How can I get the phone to "release" the partial data, if that's the issue, and start giving me the screen to enter the contact info?

Try adding a contact from another app, like Maps or email yourself a vCard.
If that doesn't work, you'll need to restore the iPhone from backup or setup as a new device.

How to select the vendor from the source list in the PO(me21n) screen ??

Hi
How to select the vendor from the source list in the PO(me21n) screen.
Is there any Sources of Supply tab in the PO just like we have in the PR.
I don't want a PO raised from a PR which has got the Vendor assigned to it already.
Or the SAP doesnot provide the option of Source list/Assign source/Sources of Supply .....in the PO.
Kindly reply

There is not any facility available for Source Determination in PO. Only you can select the line item and click Menu Environment > Source List and view the list of sources available for the material but you can not chooss and assign. If you wan to assign the vendor then change the vendor already entered in PO and put the desired vendor.

PO from SRM to External Suppliers

Hi,
We want to implement the follow scenario :
Send a PO from SRM in XML format to an external supplier using XI 3.0 , but the cuestion is whether
XI has and predefinied scenario for this task , if not ,what is the recomenndaion to implement??? ,
we need to develop all the interface??
the BBP_PO_SEND_XML is valid for this task?? or only for vendors???
example:
(SRM) ourCompanyPO.xml ->XI->Office deppot system(http)
thank's
best regards

Hi,
If there is predifned scenarios, it will have only Repository objects (Mapping , Interfaces, Message Types etc). So I am not able to find the Target structure for this sceanrio. You can get PO message into XI. For this you can use existing interfaces etc.
Actually I am using SRM5.0. But I am usig deleivered content for R/3->XI->SUS.. So here I am sending PO from R/3 to SUS and External systems. Here for external systems I am sending as a xml file itself.
I am not able to find the same as yours in my imported content. But I have PurchaseOrderRequest ....some message here. SO you can make use of that to get the PO xml into XI (via Proxy/RFC). Then you need to do the mapping etc for the target side as per the requierement. You may need to do the target strcutre etc.
I think,I have already given this thread-
XML PO Transfer To Vendor in SRM 5.0 via NW2004S/PI 7.0
Hope this helps,
Regards,
Moorthy

After upgrading from Mavericks to Yosemite I can no longer find in Mail the icon (looks like the Add To Contacts icon without the mark) I used to press in order to obtain an e-mail address from my contact list. What procedure should I use now in or

After yesterday upgrading from Mavericks to Yosemite I can no longer find in Mail the icon (looks like the Add To Contacts icon without the + mark) I used to press in order to obtain an e-mail address from my contact list. What procedure should I use now in order to quickly add an address to an e-mail that I wish to send?
Bob

On the right of the To: field you will see a circled plus sign:
Click it.

Itunes and all my movies have disappeared,i can no longer add to library from my external hdd which ive always used and can only add from the laptops own hard drive,any ideas what the issue could be?

ive recently updated, itunes and all my movies have disappeared,i can no longer add to library from my external hdd which ive always used and can only add from the laptops own hard drive,any ideas what the issue could be?if i transfer the movies from the external to the laptop they will add to the library without any problem so theres no issue with the laptop but when i go to add file in itunes i can path to the external but as soon as i select the file nothing happens, just goes back to itunes

This happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout,or vice-versa, and so is looking in slightly the wrong place.
Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes .
tt2

Add External Supplier from a Vendor List

Similar Messages

Maybe you are looking for