Add Header fields in Confirmation trx SRM 5.0

Hi guys,
In the standard version of SRM 5.0 the only fields provided in header of the confirmation are:
Conf.Number
Conf.Name
Delivery Performance date
PurchOrd.Number
Reference Document number.
We need more fields for information in the case of a Service PO. (Reponsable Internal, external, Place of performance of service etc)
How can one add input-fields in this trx?
The content of these new fields also has to travel to the Backend via the message type MBGMCR.
Anyone can give me a clue how to do this?
Thanks
Aart

Look at this strcuture INCL_EEW_PD_HEADER_CSF_CONF.

Similar Messages

HTTP adapter header fields

Hai All,
   Is there any option to add header fields dynamically in the HTTp adapter header fields?
I am doing a file to HTTp scenario.In this i have to pick a file using file adapter and add some header values(header values are both static and dynamic)and using HTTP adapter place it at a target URL.Is it possible to avoid mapping since there is only picking up of file and adding some headers to it.I can see header fields in the HTTP reseiver adapter.Can i use these to add the static and dynamiuc header fields.specifically i have two questions.
1)I want to include the source file name which is DYNAMIC as a field in the header fields in the target payload.How can this be achieved?Should i go for mapping and write a UDF for the same or is there any option to add dynamic values in the HTTP receiver adapter header fields?
2)what are these header fields for?
Can somebody explain it to me.I have gone through the Blogs like http receiver adapter configuration etc..would be of great help if anybody could explain it to me in detail.

Thanks for the replies but my question is still un answered.please guide me on how to proceed?
I am going to send a txt file.On top of the contents of the file i want these headers to be attached
In the header fields of HTTP receiver adapter configuration can i give the following format?
Header           Value
AS2 from:    hgdfdjfhd
AS2 to:        fhdfjdfdfnd
subject:       hdsjdhsdsd
will it appear in the target file as
AS2 from:    hgdfdjfhd
AS2 to:        fhdfjdfdfnd
subject:       hdsjdhsdsd
//file content starts here
dsgdsjfgdsfggf
hfdjhfdhfdjfdfhhdsfh
hgdsjfgdsjfgdfdgfdg
gfdsahdgsdfdgfgdsg
what is to be done for acheiving this kind of target file?
"If you choose to use HTTP Header fields then you can enter Field1 to Field 6 values. This will be embeded into the HTTP request as HeaderFieldOne and so on."
can this HeaderFieldOne to HeaderFieldsix be populated with any valueslike
AS2 from: ggdhfsdf and all?
please help me out.

Add Header in File Content Conversion

Hi everyone,
I have simple scenario : RFC-->flat file, but I need to add header lines at the start of the file,
Anybody any idea?
Thanks

Hi ,
To add header fields to the file while File generation -
DATATYPE_NAME.addHeaderLine = 1
· 0 No header line
· 1 Header line with column names from the XML document
Nanda

How to add custom field in Documents Tab of PO Header ?

Dear SRM Friends,
This is a challenging task as an ABAPer to confront to..
We are in the midst of a requirement where we have to add a custom field in the PO Header. But the requirement is to add the field in Documents Tab in PO Header Data as found in the following path of SRM Webpage :
Operational Purchaser > Purchase Orders > Process Purchase Order > Select a PO > Header Data > Documents.
As guided by "Note 672960 - User-defined fields 2" , on executing all the steps of the note the field is getting added, but in the Basic Data Tab of the PO. But this doesnt meet the client requirement.
Anybody having some solution to this, shall be greatly awarded.
Thanks in advance,
Vikas.

Hi Vikas,
You can define a Text ID in Header data with F4 help. But the list of values will be fixed, but configurable. This will exactly solve your problem. This will be quite simple and straight forward solution with no custom developments.
Please Navigate to
SAP Implementation Guide -> Supplier Relationship Management -> SRM Server
-> Cross-Application Basic Settings -> Text Schema
1. Define Text Types
Select BBP_PD and double click text id. Add a new text id here.
2. Define Text Schema
Select PO and add the newly created text id and set required parameters.
3. Define Fixed Values for Texts
Select your PO transaction type and maintain the required values for F4 help / drop down.
Hope this would solve your problem.
Regards
Kathirvel

VA01 Sales order - Header-- Accounting tab need to add a field

Dear All,
The requirement is,
1. I need to add a field in Sales order.
Path for the same is as follows:
VA01> Goto> Header--> Accounting tab
2. The field will be a date field that needs to calculate date on.
a)create a new field. ex - zchdt (chq due date)
b)when customers enters value in Assignment,
i.e vbak-zuonr
after that trigger logic is
3.vabk-kunnr = knvv-kunnr
a)sy-date + knvv-kvgr2 (exclude sundays)
example - 14 sept + 30 days = 14th october
should populate value - 14th october i.e. field (zchdt)
4. This activity needs to be triggered before the sales order is saved.
kindly know whether this is possible or not.
if possible how & which exit & also with example code.
if you could give me your contact(cell no).
Regards,
Nagendra D.S.
Mobile - +91 9819899082

Hi All,
VA01 Sales order - Header--> Accounting tab need to add a field. field name - zchdt(cheque due date)
when customer enters value in Assignment i.e zuonr & after that trigger logic is
1. vbak-kunnr = knvv-kunnr
2. sysdat + knvv-kvgr2 (exclude sundays)
example - 16 sept + 30days = 16 oct
in field zchdt value 16 oct as to populate
Pls help me in the code.
Regards
Nagendra

How to add a field object to group header section in crystal report document?

Hi All, I have got two questions mentioned below, please share your inputs. 1)I want to know whether it is possible to add a field object to header section in crystal report document programmatically? I am using crystal runtime for visual studio. I know that using RAS we can do it, but I want to do it using managed library of crystal runtime. Please suggest. 2) I am doing a POC where I am using RAS (unmanaged library) to manipulated crystal report document. Please see code below: var dbTable = _reportDocument.ReportClientDocument.DatabaseController.Database.Tables[0]; var dbField = dbTable.DataFields.FindField(item.ColumnName, CrystalDecisions.ReportAppServer.DataDefModel.CrFieldDisplayNameTypeEnum.crFieldDisplayNameName, CrystalDecisions.ReportAppServer.DataDefModel.CeLocale.ceLocaleEnglishUS); CrystalDecisions.ReportAppServer.ReportDefModel.FieldObject fieldObject = new CrystalDecisions.ReportAppServer.ReportDefModel.FieldObject(); fieldObject.DataSourceName = dbField.Name; fieldObject.FieldValueType = dbField.Type; var groupHeaderArea = _reportDocument.ReportClientDocument.ReportDefController.ReportDefinition.GroupHeaderArea[0].Sections[i]; _reportDocument.ReportClientDocument.ReportDefController.ReportObjectController.Add(fieldObject, groupHeaderArea); In above code last line throwing exception : "The report field type is not valid." at CrystalDecisions.ReportAppServer.Controllers.ReportObjectControllerClass.Add(ISCRReportObject ReportObject, Section Section, Int32 nIndex) Thanks, Jai

Hi Jaikumar
As per the SCN Rules of engagement, one question per thread please.
Re. your 1st question. Adding a field to a report is considered to be a report creation APIs (RCAPI). Only the RAS SDK has RCAPIs, so you can not use plain jane crystal APIs. For how to with RAS, see the examples here: NET RAS SDK Samples - Business Intelligence (BusinessObjects) - SCN Wiki
Also, consult the Developer Help Files:
Report Application Server .NET SDK Developer Guide
Report Application Server .NET API Guide
Re. your second question, please create a new discussion.
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

How to add a field in sales order header

Hi all,
I need to add a custom field say a check box in sales order header in additional data B tab.
let me know step by step.
Points will be rewarded.
Thanks.
Ramya

additional data B in sales order
sales order - Additional data B
Add new fields to Additional Data B tab in sales order
Reward Points..

How to add custom field in delivery address/performance location tab in SRM shopping cart and Ship to address Pop-up in SRM PO?

Hi Experts
i have a reuirement where i have to add custom field in delivery address/performance location tab in SRM shopping cart and Ship to address Pop-up in SRM PO
i am doing below steps for this.
1. Adding custom field ZZfield in structure INCL_EEW_PD_PARTNER_CSF by using append structure.
2. Spro ->Supplier Relationship Management -> SRM Server -> Cross application basic settings -> Extensions and field controls (personalization) -> Configure field control ->Configure Control for Fields of Substructures
then click on "Metadata for Fields of Substructures and Table-Like Enhancements"
add the below entry
Bus. Object Set Type : I am trying 7 and 29
Structure Field Name : ZZfield
Bus. Object Type       : BUS2121/BUS2201
Set Level                    : Item
Field Visible : Check box should be checked
Field Enable : check box should be checked
Can anyone has the idea of this?
Thanks
Rohit

Hello Rohit,
Please create a enchancement for component /SAPSRM/WDC_UI_DO_SHIPTO.
Add new input field and label in view V_DODC_SHIPTO.
Bind the input field value with field ZZfield from structure /SAPSRM/WDC_UI_DO_SHIPTO in the context node SHIP_TO .
Regards,
Neelima

CRM IC Winclient - How to add new fields in the BP Search of TRX CIC0

Hello Experts,
I want to know how to add new fields in the BP Search of TRX CIC0. In the HTML that we're using here I need to add the URL of the BP.
Can you help me?
Thanks in advance.
Caíque Escaler

Hi
make append to tables in se11 - CCMBP1FIELDS, CCMBP2FIELDS
in spro in Define customer-specific search control -> mark fields with X.
and enhance html template CRM_CIC_SEARCH_DISPLAY. -> tcode smw0, look for package CRM_CIC_COMPONENTS for html CRM_CIC_SEARCH_DISPLAY. export it from SAP, edit, and import.
you will need to enhance function module used for searching - you will find him in spro in Search Strategies.
Regards
Radek

How to add a user defined HTTP header field?

Hi, everyone!
I want to add a user defined HTTP header field to a HTTP
response header.
I use the following statements in testHeader.jsp
response.addHeader("myheader", "123");
response.sendRedirect("middleHeader.jsp");
in middleHeader.jsp,
out.print(request.getHeader("myheader"));
But the output in middleHeader.jsp is null!
How to add a user defined HTTP header field to a HTTP
response header? Are there some sample codes?
Cheers,
George

the send redirect actually creates a new request (through the client) and thus a new response
thus the headers you set in the response are gone for the next request/response
You can try servletDispatcher.forward

Add new fields on the header screen of COR1

Hi Experts,
I am new to this type of work, please help me in doing....
My requirement is, to add one field on the header details of the COR1 from a Z table.
Can anyone please tell me how to handle this.
I searched the regarding this in SDN but i had not got any solution.
Can any one please tell me how to handle this(screen shots will be more helpfull).
Please take it as priority.
Thanks in advace,
Kruthik
Edited by: kruthik_06 on Jun 20, 2011 9:04 AM

Hi all,
I need to know if is it possible to add a custom field in COR1 for process order. I searched forum for something about this, but cannot find anything.
can anybody please suggest me something ?
thanks
Kruthik

Add a field in the header of MB21/MB22

Hello gurus, i am interested in adding one field in the header of the mb21 (reservations), but i didn't find one exit or one badi for my purposes. My question is someone knows an easy manner for adding the fields to the screen. I tried to use enhancements and create one badi and a group of functions. But i don't know how to add the field to the screen. I tried to create a subscreen in a group of functions, but in this point i'm lost, because i don't know how connect the screen that i create in the group of functions with the standard.. ( i don't want to modify the standard directly, including the standard screens),
With my best regards.

Hi
Check this
MB_RES_BAPI_CREATE1 BAdI: Adoption of Customer's Own Fields
MB_RES_BAPI_DETAIL1 Display of Customer's Own Fields
Regards
Pavan

Add new fields in the header of RFITEMAR

hi,
i want to add new fields in the header of RFITEMAR report ,so first i copy i to zRFITEMAR ,then i want to add
" Total Quantity " in the header after City field .
can any one help me????????
please ,, i waiting your answers..
thank you......

hi ,
thanks for your response , but first i try to copy the function then it give an error as it is reserved for sap , so i change it's name and copy it and change function group to z also then it relese an error for function pool , any way.
where can i make change in that function .
and how can i copy it . please tell me every think in more detials.
waiting
thanks.

WCTL Transaction - Add Custom Field Header level

Hi All,
Here at my client's place guys are doing PoC on WCM (PM being used for last couple of years) and the requirement is to have a custom field at Header level of WCTL (WC Application Change ) with F4 option.
I have created a custom field with z table for master data to it (will be used as check table for this field) and appended it to the WCAAP - WCM: Application using append structure option.
Now I need to add this field at the header level of the mentioned transaction. I searched throgh for any available exits, BADI's or enhancement spots with no success. Even Inforums i couldnt find any help and hence this message.
Will appreciate any inputs in this regard,
Thanks,
Lakshmi Narayana.

Hi Narasimhan,
First of all thank you verymuch for the quick reply.
I tried to search for the BADI definition (BADI_WCM_WAPI_001) and Enhancement Spot (ES_WCM_BADI) (se18) with no success. We are using ECC6.0 with SAP_ABA patch level 10, EA-APPL (SAP Enterprise Extension PLM, SCM, Financials) at level 7.
Does this has any impact on why I couldnt find it or is there something that I am doing wrong... Please guide me...
Thank you once again for your time.
Rgds,
Lakshmi Narayana

Add customer fields to purchase order header

Hi ,
I need to add two additional fields to the purchase order header.
In std program SAPMM06E screen number 101 i have seen a code
CALL CUSTOMER-SUBSCREEN CUSTSCR1 INCLUDING 'SAPLXM06' '0101'
how to make use of this..and add my fields..wht all steps need to be done for this..
do i hve to append fields to ekko..pls give me details
ansari

You have to use [Enhancement|http://help.sap.com/erp2005_ehp_04/helpdata/EN/bf/ec079f5db911d295ae0000e82de14a/frameset.htm] MM06E005, read the enhancement documentation for more information.
- Look at enhancement via transaction [SMOD|https://www.sdn.sap.com/irj/scn/advancedsearch?query=smod&cat=sdn_all]
- Implement via transaction [CMOD|https://www.sdn.sap.com/irj/scn/advancedsearch?cat=sdn_all&query=cmod&adv=false&sortby=cm_rnd_rankvalue]
Look at [Enhancements|http://help.sap.com/erp2005_ehp_04/helpdata/EN/bf/ec079f5db911d295ae0000e82de14a/frameset.htm] and [Customer Exits|http://help.sap.com/erp2005_ehp_04/helpdata/EN/c8/1975cc43b111d1896f0000e8322d00/frameset.htm] or the old [Changing the SAP Standard (BC)|http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCDWBCEX/BCDWBCEX.pdf]
Another source of information begins at OSS [Note 496083 - FAQ: Customer enhancements (User Exits) in purchasing|https://service.sap.com/sap/support/notes/496083]
Regards

Add Header fields in Confirmation trx SRM 5.0

Similar Messages

Maybe you are looking for