Add Header in File Content Conversion

Hi everyone,
I have simple scenario : RFC-->flat file, but I need to add header lines at the start of the file,
Anybody any idea?
Thanks

Hi ,
To add header fields to the file while File generation -
DATATYPE_NAME.addHeaderLine = 1
· 0 No header line
· 1 Header line with column names from the XML document
Nanda

Similar Messages

Supress Column Heading - File Content Conversion in Sender Adapter

Hi,
Let me give a more clear picture about my scenario. I need to convert CSV File to XML output:-
My source file has column heading and values. The sample data is mentioned hereunder:-
PERNR;KID;PNALT;NACHN;NAME2;VORNA
;1200;1200;Angus
I have created a data type as under:-
DT_LegacyEmployee (Category - Complex Type)
     Employees (Category - Element, Occurence - 1)
          Header (Category - Element, Occurence - 0...1)
               PERNR_H
               KID_H
               PNALT_H
               NACHN_H
               NAME2_H
               VORNA_H
          Employee (Categroy - Element, Type - DT_LegacyEmployee_Row, Occurence - 0...unbounded)
               PERNR
               KID
               PNALT
               NACHN
               NAME2
               VORNA
The file conversion parameters in the file sender adapter are mentioned hereunder:-
Document Name - MT_LegacyEmployee
Document Namespace - http://abc.com/xi
Recordset Name - Employees
Rescordset Structure - Header,1,Employee,*
Recordsets per Message - 1
Key Field Type - String (Case Sensitive)
Employee.fieldSeparator - ;
Employee.endSeparator - 'nl'
Employee.fieldNames - PERNR,KID,PNALT,NACHN,NAME2,VORNA
I dont' have a key field value. How do we remove the header and show only the values in the xml output. I have searched the forum topics as well checked many blogs related to file content conversion, but nothing helped. Kindly advice how to fix this issue. Thanks in advance.
Regards.
Praveen

Hi Praveen,
Change your File Adapter as below
Document Name - MT_LegacyEmployee
Document Namespace - http://abc.com/xi
Recordset Name - Employees
Rescordset Structure - Employee,*
Recordsets per Message - 1
Key Field Type - String (Case Sensitive)
Employee.fieldSeparator - ;
Employee.endSeparator - 'nl'
Employee.fieldNames - PERNR,KID,PNALT,NACHN,NAME2,VORNA
There is no need for the Header required in the data type.
DT_LegacyEmployee (Category - Complex Type)
Employees (Category - Element, Occurence - 1)
Employee (Categroy - Element, Type - DT_LegacyEmployee_Row, Occurence - 0...unbounded)
PERNR
KID
PNALT
NACHN
NAME2
VORNA
Now the trick is in the mapping program
Lets assume your mapping looks like
MT_LegacyEmployee ---> MT_TargetEmployee
- Employees ---> Records
   - Employee ---> Record
     - PERNR ---> TargetPERNR
     - .. so on
When you do a mapping from Employee ---> Record apply the following logic.
(PERNR)--->
             (TestEquals =) --->(NOT)--->
(Constant) --->                                (IF)
(PERNR)                       (IF Without Else) ---> (Record)
                                               (THEN)
                            (Employee)--->
When doing this make sure RightClick on PERNR and Select Context ---> Employees.
By default context would be from Employee and it will give you an error of XSD format. So make sure you are changing the context.

File content conversion - sender adapter for Header and detail records

Hi Experts,
I am receiving a field of fixed length content format.(Header)The first line of the file will follow the structure X having some fields and (DetailRecord)subsequent lines in the file will follow structure Y having somes fields.There is no record identifier for Header and Detail records.In one file first line is Header records and remaining subsequent line is DetailRecord.What are the parameters we have to set for sender file content conversion parameters as i donot have any key field and key field value.And in one file we have only one header records ( first line) and n number of detail records from 2nd line onwards.
Thanks
Deepak

Hi
Refer the below fourm link,
Flat file whitout id
Regards
Ramg.

Remove Header Node in File Content Conversion

Hi Guys,
     In our scenario receiver payload is
<?xml version="1.0" encoding="UTF-8"?>
<ns1:MarketInventoryResponse xmlns:ns1="PRINCIPALS/MarketInventory">
     <Header>
            <CurrentDate>200809</CurrentDate>
     </Header>
     <MarketInventory>
            <Local_ProductCode>121</Local_ProductCode>
            <WH_QTY>20</WH_QTY>
            <WH_Cost>3000</WH_Cost>
            <Store_QTY>40</Store_QTY>
            <Store_Cost>5000</Store_Cost>
      </MarketInventory>
</ns1:MarketInventoryResponse>
We are using File content conversion method. Now we got the output is
200809
121#20#3000#40#5000
But We need below mentioned format.
121#20#3000#40#5000
we don't need CurrentDate which is in Header node. So, how to ignore Header node in FCC method. Please any one help me.
Note : Now we using following parameters in FCC
Recordset Structure : MarketInventory
MarketInventory.addHeaderLine   : 0
MarketInventory.fieldSeparator     : #
MarketInventory.endSeparator      : 'nl'
Thanks & Regards
Vijay

Hi Vijaya,
You have two options:
1.- Sãnthosh Kûmãr V   Solution:
Recordset Structure : Header,MarketInventory
Header.fieldFixedLengths = 0
Header.fixedLengthTooShortHandling = Cut
Header.endSeparator = '0'
2.- Use Adapter-Specific Message Attributes in your File adapter.
In the last one you would have to set the name of your file in FileName atributte.
Carlos

Receiver file Content Conversion with Header line

Hi,
Here I am doing receiver file content conversion with header line.
I am able to get the output file correct, when I open the file in notepad the header line and data appearing in the same line (not accepted).
But when I tried to open the name file in internet explorer I can see the header line and data in two different lines (accepted).
What should I do I want to see the same output in the notepad?
Please help me out.
Thanks in advance,
Srikanth.

You can use NameA.addHeaderLine.
Specify whether the text file will have a header line with column names. The following values are permitted:
0 u2013 No header line
1 u2013 Header line with column names from the XML document
2 u2013 As for 1, followed by a blank line
3 u2013 Header line is stored as NameA.headerLine in the configuration and is applied
4 u2013 As for 3, followed by a blank line
The below weblinks will help you to know the other paramters.
http://help.sap.com/saphelp_nw04/helpdata/en/d2/bab440c97f3716e10000000a155106/content.htm
http://help.sap.com/saphelp_nwpi71/helpdata/en/44/686e687f2a6d12e10000000a1553f6/content.htm

File Content Conversion - Header

Hi,
I need to produce an pipe delimited file. The only problem is that that column fields would need to be differentiated with an hypen.
A typical file format is
NAME
ADDRESS
AGE
ONE
134,DSTREET
27
TWO
222,SSTREET
28
How do i specify the two lines of hypen(-) in file content conversion, is it possible or do i need to use any unix script to achieve it.
When i posted, the pipe delimited disappeared.
Please note that there is pipe delimeted between each fields.
Regards
Krish
Edited by: Krish on Dec 21, 2011 2:20 PM

hi Krish,
you can do it in your target Data Type, by specifying a structture which is not only based on your records, but like that:
HypenLine1
your headerLine (with field names)
HypenLine2
your Records... (so your current structure)
so something like:
DT_MyDataType
....HypenLine1 level with occurence 0..1
.............LineField with occurence 0..1
.... headerLine level with occurence 0..1
and in your mapping,
¤ you put constant in each field of your HeaderLine to provide the name of your field. (*)
¤ you put as many '-' character you want in your single field "LineField" of HypenLine1 and HypenLine2.
(*) of course, in your receiver CC, you should remove your option which produces the headerLine based on your fields names, as now this line is maintained directly in your mapping.
Mickael
Edited by: Mickael Huchet on Dec 21, 2011 2:38 PM

File Content Conversion--- Removing Quotations from csv file

I have a csv file in the folowing format:
field1,field2,field3,field4
"111","222","333","444"
"aaa","bbb","ccc","ddd"
Suppose the header name is row in IR.
While configuring the sender file adapter in XI, i have given following parameters under file content conversion.
row.fieldNames=field1,field2,field3,field4
row.fieldSeparator=","
row.processFieldNames=fromConfiguration
row.beginSeparator="
After picking up the XML file XI processes the data so that we have out put as
row
field1 111
field2 222
field3 333
field4 444"
row
row
field1 aaa
field2 bbb
field3 ccc
field4 ddd"
row
My Problem is what parameter should I add in ID to remove this last quote say 444" and ddd" from the XML message ????
I tried using
row.endSeparator=" but it is still giving the same output.
Can anyone help ????????????????????????

Hi,
Try this FCC instead
row.fieldNames=field1,field2,field3,field4
row.fieldSeparator=,
row.processFieldNames=fromConfiguration
row.enclosureSign=u201C
row.enclosureSignEsc=u201Cu201C
row.endSeparator='nl'
http://help.sap.com/saphelp_NW04/helpdata/en/e3/94007075cae04f930cc4c034e411e1/frameset.htm
If you specify xml.enclosureSign=u201C and xml.enclosureSignEsc=u201Cu201C, text enclosed in quotation marks is transferred unchanged and the quotation marks are removed.
Thanks
SaNv...

Mail Adapter and File content conversion.

I have a scenario to send data from SAP to 4 different boards. I have used a Multi mapping for this scenario. I am using Proxy for SAP to xi and SOAP, File and Mail adapter for the external connections.
Questions:
1) I need to send a mail in CSV or Excell format in one scenario. I have used AF_StrictXml2Plain Module but its not working? any thoughts?
2) In the file adapter I have to add the YYYYMMDD (current Date) to the file name? when I use timestamp i get the time too, any way of getting only date? I cant use the Variable substitution as i dont have date in my payload.
3) Receiver File content conversion:
My Message Type Looks like this
MT_XX_XX
     Row
        title
        xxx
I have used these parameters:
Recordset Structure: Row
Row.addHeaderLine : 0
Row.fieldSeparator : ,
Row.endSeparator: 'nl'
am I doing something worng, the file content conversion doesnt work.
Please let me know
Thanks in advance

Hi,
Make sure u are using the bean before the mail adapter bean.
Before using the file content conversion make sure that there are no substructures in it , in order to use addheader line as 0. else use addheaderline 3 and give the headerline as comma seperated values
for e.g if this is the type then addheader line= 0
Type 1 :
Record_Mt
     Row
         field1
         field2
else if this the type then addheaderline = 3
*Type 2: *
Record_Mt
     Row1
         field1
         field2
     Row2
         field1
         field2
add module like this
localejbs/sap.com/AF_Modules/StrictXml2PlainBean
with the module key e.g. key
for type 1 struct (as above )add parameter- key as singleRecordType and value as Row with comma seperated value. (remember header line is 0)
for type 2 structure (as above )add parameter- key as recordTypes and value as Row1, Row2 with comma seperated value. (remember header line is 3)

File Content Conversion - Key Field Value

Hi Experts,
I am using File to Idoc scenario for my mapping. In the receiver Communication channel, I am using File Content Conversion. My scenario is as follows :
I have a recordset with Header and Line items with Key Field Indicator as 'H' and 'L'. In some cases, the value for this Key Field is coming in as something other than 'H' and 'L'. I need to throw an exception when this Key Field is not 'H' or 'L'.
In the 'Content Conversion' tab, my attributes are as:
Header_Structure.keyFieldValue = 'H' and Line_Structure.keyFieldValue = 'L'. Is there any more attributes that I need to add ?
Please advise. Thanks a lot.
Regards,
Freddy.

>>multiple key field values in FCC configuration i.e Line_Structure.keyFieldValue = H or L
AFAIK it is not possible but lets wait for other experts to comment on this...
>>Can keyFieldInStructure (add, ignore) parameter help me in this case ?
No. this parameter is only used when you want to include key filed in ur XML structure(add) or not (ignore)...
Chk this:
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/2c/181077dd7d6b4ea6a8029b20bf7e55/content.htm

File Content Conversion ( avoid fields in conversion)

Hi all
                    An IDoc to File scenario , I am doing file content conversion in receiver File adapter.
my message type for file 2 HEADER each having its own substructure
Like    1header
                   fieldA
          2header
                   fieldC
                   fieldD
I want the "<b>1header and its 1 subelement not be converted in file content conversion" </b>
because its used for dynamic file name configuration, so i do'nt want it to be written on file.
Regards
Ashutosh.r

Rawat,
Yes I know you will get that error. That is the reason why I have told you to add another parameter fixedLengthTooShortHandling as Cut. So add one more parameter in your file receiver communicaion channel: Also I hope ASFD0101 is your strcuture not the field in the strcuture.
ASFD0101.fixedLengthTooShortHandling : Cut
Then I think it should work like a boom.
---Satish

File Content Conversion for Multi Hierarchical Structure for Sender Adapter

Hi Gurus,
My text file is coming as
Header,filed1,field2(Occurrence=1)
Content,field3,field4(Occurrence =1-Unbounded)
Detail,field4,field5(Occurrence = 1-unbounded)
Trailer,fieldN(Occurrence=1)
My requirement is to write a file content conversion, so that, in the resultant XML Structure the Detail will come under Content.
I have defined the Record Set Structure as
Header,1,Content,*,Detail,*,Trailer,1
But after FCC, the Detailed record is coming in the same level as the Content Record. But the business requires that, the Detailed Record should come under Content Record, so that they can correlate.
Could any one advise?
Regards,
SS
Edited by: Subhendu Sahu on Jun 17, 2011 4:43 PM

Hi,
Please use the below parameters -
○       NameA.keyFieldValue
Specify the value of the key field for the structure.
This entry is mandatory if the key field name is set. Otherwise, the entry is ignored.
NameA.keyFieldInStructure
■       If the key field of the substructure is to be added to the XML document, enter add. This is the default.
■       If the key field is to be ignored, enter ignore.
http://help.sap.com/saphelp_nwpi711/helpdata/en/44/6713ec3f914ddee10000000a1553f7/frameset.htm
cheers,
Sunil

Required help for Identifying diff. items in file content conversion.

Hi All,
I've to use a file content conversion parameters for a .txt file in which there are two objects. One is a header and the other is a item detail.
How do we get or mark the difference between both so that XI recognizes the particular line is a Header and the other is a Item detail
Thanks in Advance.
Regards,
Sree.

Hi
Make use of a field which is common to header and item line which will always hold different values for header and item. Or otherwise if possible, add an extra field in the header and item lines, say 'Key' and use it in the 'Key Field Name' parameter in the adapter configuration. See this for details - [File Content Conversion for Complex Structures|http://www.riyaz.net/blog/index.php/2008/02/20/xipi-file-content-conversion-for-complex-structures/].
Regards,
Riyaz

Receiver File content conversion for multi level hireachy

Receiver channel file content conversion..
this is SAP proxy to FIle Scenario, which will get invoice details from SAP along with multiple invoice texts for each invoice.
I would like to have below mentioned payload at Target side,
<MT_Invoice>
<File Header>    1...1
<f1> customer invoices </f1>
<f2> 12/02/2010 </f2>
</File Header>
<Invocie header>
<f1> Invoice number1 </f1>
<f2> customer number1 </f2>
</Invoice header>
<Invoice text>
<f1> Inovice no1-text1 </f1>
</Invoice text>
<Invoice text>
<f1> Inovice no1-text2 </f1>
</Invoice text>
<Invocie header>
<f1> Invoice number2 </f1>
<f2> customer number2 </f2>
</Invoice header>
<Invoice text>
<f1> Inovice no2-text1 </f1>
</Invoice text>
<Invoice text>
<f1> Inovice no2-text2 </f1>
</Invoice text>
<Invocie header>
<f1> Invoice number3 </f1>
<f2> customer number3 </f2>
</Invoice header>
<Invoice text>
<f1> Inovice no3-text1 </f1>
</Invoice text>
<Footer> 1..1
<f1> have a great day </f1>
</footer>
</MT_Invoice>
for the above payload file should come as mentioned below
customer invoices 12/02/2010
invocie number1 customer no 1
invoice no1-text1
invoice no1-text2
invocie number2 customer no 2
invoice no2-text1
invoice no2-text2
invoice no2-text3
invocie number3 customer no 3
invoice no3-text1
have a great day
For to get the above payloadI have create a message type like
MT_invoice
header   1...1
   f1         1
   f2         1
invoice details   0... unbound
   f1           1
   f2           1
invoice text     0.... unbound
   f1
footer       1...1
   f1          1
Please correct me if my message type declaration was wrong...
Please suggest how do i need to approach for message mapping and as well as FCC in File adapter...
Edited by: Vidyadhar Kurmala on Dec 2, 2010 10:28 AM

It is not possible to create alternating nodes in graphical mapping tool.
I recommend using the MessageTransformBean for FCC, as this supports a 2-level hierarchy.
Then you add a node record like this:
<MT_Invoice>
<Record>
<File Header> 1...1
<f1> customer invoices </f1>
<f2> 12/02/2010 </f2>
</File Header>
</Record>
<Record>
<Invocie header>
<f1> Invoice number1 </f1>
<f2> customer number1 </f2>
</Invoice header>
<Invoice text>
<f1> Inovice no1-text1 </f1>
</Invoice text>
<Invoice text>
<f1> Inovice no1-text2 </f1>
</Invoice text>
</Record>
<Record>
<Invocie header>
<f1> Invoice number2 </f1>
<f2> customer number2 </f2>
</Invoice header>
<Invoice text>
<f1> Inovice no2-text1 </f1>
</Invoice text>
<Invoice text>
<f1> Inovice no2-text2 </f1>
</Invoice text>
<Invocie header>
<f1> Invoice number3 </f1>
<f2> customer number3 </f2>
</Invoice header>
<Invoice text>
<f1> Inovice no3-text1 </f1>
</Invoice text>
</Record>
<Record>
<Footer> 1..1
<f1> have a great day </f1>
</footer>
</Record>
</MT_Invoice>

Problem in file content conversion from XML to CSV

Hi Experts,
I am finding problem in file content conversion. I need to convert the following XML file into CSV file:
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:MT_CROSS_REF xmlns:ns0="urn:dabur:idoc2file:pos">
      <Update_type>2</Update_type>
      <PLU>00000000</PLU>
      <Cross_ref_PLU>7777777</Cross_ref_PLU>
      <Capture_PLU />
      <Package_size />
      <Package_desc />
</ns0:MT_CROSS_REF>
The output file data has to be like:
2,00000000,7777777,,,,
The problem I am facing is while specifying the content conversion parameters in communication channel i dont know what recordset structure i should mention as all the records are directly under root. If I mention recordset structure as "ns0:MT_CROSS_REF" and parameters as
ns0:MT_CROSS_REF.fieldSeparator   ,
ns0:MT_CROSS_REF.endSeparator    'nl'
i get error in communication channel monitoring and no file is posted.
Please help me as to what correct parameter i should mention in my case.
Thanks,
Regards,
Yash

Hi Chirag,
I cannot change the xml file as it comes after mapping idoc to a message type. How can I add ROOT in the xml? My message type is like MT_CROSS_REF and it has those 6 fields as in the XML (Update_type, PLU etc.). I do the mapping of these fields from a IDOC and get the XML.
I hope you got my point.
Thanks,
Yash

Complex file content conversion in case of CSV file

Hi Friends,
What you see below is generated from Excel i.e excel file saved as CSV file. This file i need to map in XI.
Problem is i have to take only the data and not the header part.
for e.g in this particular line
Employee ID          :,,E00315
I need only E0315 and not the header value. Similarly i have to find some solution to map all the required data.
Please suggest me how to use file content conversion in such scenarios.
Solution is required on top priority. Points will be immdly rewarded.
Thanks & Regards
K.Ramesh
,,Time Sheet,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
,,,,,,,,,,Ref. No: T-PRO-01-011,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
,,,,,,,,,,Page No.: 01,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Employee ID          :,,E00315,,,Sale Order No / Line Item :,,,SO123456,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Employee Name    :,,K.RAMESH,,,Client Name                         :,,,NCLIENTELE,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Month / Week        :,,Jul-08,,,Project Name                       :,,,Internal Project,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Sales Team            :,,,,,Project Role Start date      :,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Location                   :,,BANGALORE,,,Project Role End date         :,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Sl. No.,Date,Day,AA Type, Task Description,,,,,No.of Hours,Remarks,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
1,7/1/2008,Tue,0814-Talent acquitision,task 1,,,,,12.00,rmk 1,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
2,7/2/2008,Wed,0814-Talent acquitision,task 2,,,,,10.00,rmk 2,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
3,7/3/2008,Thu,0814-Talent acquitision,task 3,,,,,12.00,rmk 3,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
4,7/4/2008,Fri,0814-Talent acquitision,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
5,7/5/2008,Sat,0814-Talent acquitision,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
6,7/6/2008,Sun,0950-Holiday,,,,,,,,,,,,,,,,,,,,,,,,, ,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
7,7/7/2008,Mon,0804-Development,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
8,7/8/2008,Tue,0804-Development,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,, , , ,,,,,,,,,,,,,,,,,,,,
9,7/9/2008,Wed,0804-Development,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
10,7/10/2008,Thu,0804-Development,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
11,7/11/2008,Fri,0804-Development,,,,,,,,,,,,,,,,,,,,,,,,,,,, , ,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
12,7/12/2008,Sat,0950-Holiday,,,,,,,,,,,,,,,,,,,,,,,,,,,, ,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
13,7/13/2008,Sun,0950-Holiday,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,, ,,,,,,,,,,,,,,,,,,,,
14,7/14/2008,Mon,0900-Paid leave,,,,,,,,,,,,,,,,,,,,,,,,,, ,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
15,7/15/2008,Tue,0900-Paid leave,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
16,7/16/2008,Wed,0804-Development,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
17,7/17/2008,Thu,0804-Development,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
18,7/18/2008,Fri,0804-Development,,,,,,,,,,,,,,,,,,,,,,,,,,,,,, ,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
19,7/19/2008,Sat,0804-Development,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
20,7/20/2008,Sun,0950-Holiday,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
21,7/21/2008,Mon,0804-Development,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
22,7/22/2008,Tue,0804-Development,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
23,7/23/2008,Wed,0804-Development,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
24,7/24/2008,Thu,0804-Development,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
25,7/25/2008,Fri,0804-Development,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
26,7/26/2008,Sat,0814-Talent acquitision,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
27,7/27/2008,Sun,0950-Holiday,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
28,7/28/2008,Mon,0804-Development,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
29,7/29/2008,Tue,0804-Development,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
30,7/30/2008,Wed,0804-Development,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
31,7/31/2008,Thu,0804-Development,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Prepared By:,,,,,Approved By:,Company Project Manager,,,,Client Project Manager,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Name,,K.RAMESH,,,Name,YYY,,,,ZZZ,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Signature,,,,,Signature,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Date   ,,31.07.2008,,,Date           ,31.07.2008,,,,31.07.2008,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,

Hi,
In this CSV file, what all i need is the value E00315 after the label Employee ID. I used in FCC the parameters u asked me to do. Also in the Document Offset i gave value 3 so that the first three lines are ignored.
1,,,Time Sheet,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
1,,,,,,,,,,,Ref. No: T-PRO-01-011,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
1,,,,,,,,,,,Page No.: 01,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
1,Employee ID          :,E00315
But still i am getting the error
Conversion of file content to XML failed at position 0: java.lang.Exception: ERROR converting document line no. 4 according to structure 'tims_header':java.lang.Exception: ERROR in configuration / structure 'tims_header.': More elements in file csv structure than field names specified!
Please help.
Thanks
Ramesh

Add Header in File Content Conversion

Similar Messages

Maybe you are looking for