Add listener to work with weblogic

          hi
          i make a administration question:
          now i work with the weblogic into the default port,7001.
          and i would like to work whith another port , such us port 80 . I find into documentation in weblogic into the section Setting WebLogic properties , the sub secction Setting up WebLogic to listen on port 80 , but this not talk about add listener, only how to listen by the other port.
          is there any document to solve my problem
          or knowing somebody the solution?
          any help will be appreaciated

weblogic.system.listenPort=80
          Or are you asking how to get it to listen on both ports at the same time?
          If so, I do not believe that feature is supported. What are you trying to
          accomplish?
          Peace,
          Cameron Purdy
          Tangosol, Inc.
          http://www.tangosol.com
          +1.617.623.5782
          WebLogic Consulting Available
          "ruben" <[email protected]> wrote in message
          news:3a1e6bb9$[email protected]..
          >
          > hi
          > i make a administration question:
          > now i work with the weblogic into the default port,7001.
          > and i would like to work whith another port , such us port 80 . I find
          into documentation in weblogic into the section Setting WebLogic properties
          , the sub secction Setting up WebLogic to listen on port 80 , but this not
          talk about add listener, only how to listen by the other port.
          > is there any document to solve my problem
          > or knowing somebody the solution?
          > any help will be appreaciated

Similar Messages

Icloud add-in stopped working with Outlook 2010.

All of a sudden the add-in stopped working with Oulook 2010 on my Windows 7 PC. Instead of the refresh button on the toolbar is says "incorrect password." I have not changed my icloud username or password. I tried to setup from icloud control panel, but I get an incorrect password error. Any ideas?

Followed instructions in another thread. Ran "repair" on Office. In iCloud control panel ran the setup. Enabled icloud add-in in Outlook. Seems to be working now.

WLS :: Will Vista web client work with Weblogic Server 8.1.6 over SSL?

Hello,
I have installed 51-2 bit SSL cert on weblogic 7 and found that the secure site doesn't work on Vista web client.
Weblogic gives error in handshaking and says algorithm is not supported.
Vista web client uses some algorithms which were not supported by weblogic 7.
So would like to know if would Vista web client work with Weblogic Server 8.1.6 over SSL?
Any information in this regard would be helpful.
Thanks in Advance.

can you use the following debug flags in the weblogic server as java_options and paste the complete ssl handshake exception here.
-Dweblogic.StdoutDebugEnabled=true
-Dssl.debug=true
thanks,
sandeep

Debugger that works with WebLogic 5.1?

Are there any debuggers currently available that will work with WebLogic
5.1?
I assume that VisualCafe 4.0 (Expert Edition) will support local debugging,
but I'm also interested in remote debugging which the Expert edition does
not support.
If not, does anyone know when VisualCafe Enterprise Edition 4.0 will ship?
Thanks.
Greg

Hi!
I have problem to get the co-client debug project to run. Do you have
the same problem?
-----Original Message-----
From: Terry Potter [mailto:[email protected]]
Posted At: måndag, augusti 07, 2000 23:18
Posted To: tools
Conversation: Debugger that works with WebLogic 5.1?
Subject: Re: Debugger that works with WebLogic 5.1?
I use the deistributed debugging that comes with Visual Cafe by Webgain
v4.0. It works fine.
"Jim Piersol" <[email protected]> wrote in message
news:3989ccec$[email protected]..
Get a real debugger. Try BugSeeker from http://www.karmira.com
Jim Piersol
Senior Software Engineer
Sun Certified Java Programmer
Strata Group, Inc.
[email protected]
"Greg Kim" <[email protected]> wrote in message
news:8ibuit$35e$[email protected]..

(266758030) Q SYNCH-12 Does Workshop work with WebLogic Server 6.1?

(266758030) Q<SYNCH-12> Does Workshop work with WebLogic Server 6.1? (asked by Noel
Fuentes)
A<SYNCH-12> (by Adam Fitzgerald): No, Web Services in WebLogic Server 6.1 are different
from those available in WebLogic Server 7.0. WebLogic Workshop is a WLS 7.0 tool.

Rick,
You may want to look at the Alteon and F5 configuration we have on edocs.
Take a look at the following URLs for a possible solution
http://edocs.bea.com/wls/docs61/cluster/alteon.html#591902
http://edocs.bea.com/wls/docs61/cluster/bigip.html#591902
Chuck Nelson
DRE
BEA Technical Support

Interested in work with Weblogic Content Express

Hello, I'm interested in work with Weblogic Content Express and I would like some information (stepts) about how obtain this product because we are working with Weblogic Server, Weblogic Commerce Server and Weblogic Personalization Server and I can't found this tool. Thank for your attention and your help. Carlos

Try this utility: http://h20180.www2.hp.com/apps/Nav?h_pagetype=s-926&h_lang=en&h_client=s-h-e17-1&h_keyword=dg-NDU&ju...
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Does Add-on googlesharing work with version 9.0.1

does Add-on googlesharing work with version 9.0.1

Thanks for confirming things Vivek.Wilfred.
FYI, for future others with this problem: After a couple hours of playing around it was fixed, though I'm not sure what finally did it. Be sure that you try Google's "Sign Out of All Accounts", and not just the regular sign out option.

Does JDeveloper work with Weblogic??

Does JDeveloper work with Weblogic??
Or it can be compitible with some other server also .....

WebLogic server is integrated with JDeveloper.
Does JDeveloper work with Weblogic??
Other application servers are also supported.
http://www.oracle.com/technetwork/developer-tools/jdev/index-091111.html

How to configure Oracle 8 to work with Weblogic portal4.0

Hi! I'm trying to configure my portal to work with oracle8i using thin driver.I've set classes12.zip in the classpath.But if I set the DATABASE=ORACLE_OCI value inthe set-environment.sh file the server does not start.Pls help.

Here's the error log it throws for the problem:
: 'Fatal initialization exception
Throwable: java.lang.IllegalAccessError: Exception[com.bea.p13n.security.realm.R
DBMSException: An error occured creating a database connection for the realm.]
java.lang.IllegalAccessError: Exception[com.bea.p13n.security.realm.RDBMSExcepti
on: An error occured creating a database connection for the realm.]
at weblogic.security.acl.Realm.getRealm(Realm.java:91)
at weblogic.security.acl.Realm.getRealm(Realm.java:62)
at weblogic.security.SecurityService.initializeRealm(SecurityService.jav
a:258)
at weblogic.security.SecurityService.initialize(SecurityService.java:115
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:390)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:202)
at weblogic.Server.main(Server.java:35)
'>

JSP PRECOMPILER IS NOT WORKING WITH WEBLOGIC 6.1 SERVICE PACK 5

          When i compile JSPs using JSP PreCompiler in weblogic 6.1
          ( Service Pack 4 ) , compilation is perfect.
          But when i precompile the same JSPs with weblogic 6.1 (Service Pack 5 )
          , i get compilation error.
          Variable Not Found error comes in service pack 5. But the same code works
          well with service pack 4.
          Could anyone help me ?
          [java] C:\CVSMessageRouter\platform-apps\2notify\webapp\consoleapp\.\web\WE
          NF\classes\jsp_servlet\_secure\__confirmation.java:280: cannot resolve symbol
          [java] symbol : variable yesLinkPageText
          [java] location: class jsp_servlet._secure.__confirmation
          [java] htmllink0.setPage(yesLinkPageText); //[ /secure/co
          rmation.jsp; Line: 32]
          [java] ^
          [java] C:\CVSMessageRouter\platform-apps\2notify\webapp\consoleapp\.\web\WE
          NF\classes\jsp_servlet\_secure\__confirmation.java:378: cannot resolve symbol
          [java] symbol : variable noLinkPageText
          [java] location: class jsp_servlet._secure.__confirmation
          [java] htmllink0.setPage(noLinkPageText); //[ /secure/con
          mation.jsp; Line: 37]
          [java] Error: compilation of jsp file /secure/confirmation.jsp (java file C
          VSMessageRouter\platform-apps\2notify\webapp\consoleapp\.\web\WEB-INF\classes
          p_servlet\_secure\__confirmation.java failed):
          [java] ^
          [java] null
          [java] 2 errors
          [java] Error: [jspc]: 1 file(s) failed:
          [java] /secure/confirmation.jsp
          [java] java.io.IOException: Compiler failed executable.exec(java.lang.String


Can you post the jsp page or a example which doesnt compile in sp5. It seems
          difficult to guage what the problem could be from looking at the error.
          --Nagesh
          "george vargeese" <[email protected]> wrote in message
          news:40c56502$1@mktnews1...
          >
          > When i compile JSPs using JSP PreCompiler in weblogic 6.1
          > ( Service Pack 4 ) , compilation is perfect.
          >
          > But when i precompile the same JSPs with weblogic 6.1 (Service Pack
          5 )
          > , i get compilation error.
          >
          > Variable Not Found error comes in service pack 5. But the same code
          works
          > well with service pack 4.
          >
          > Could anyone help me ?
          >
          >
          > [java]
          C:\CVSMessageRouter\platform-apps\2notify\webapp\consoleapp\.\web\WE
          > NF\classes\jsp_servlet\_secure\__confirmation.java:280: cannot resolve
          symbol
          >
          > [java] symbol : variable yesLinkPageText
          > [java] location: class jsp_servlet._secure.__confirmation
          > [java] htmllink0.setPage(yesLinkPageText); //[
          /secure/co
          > rmation.jsp; Line: 32]
          > [java] ^
          > [java]
          C:\CVSMessageRouter\platform-apps\2notify\webapp\consoleapp\.\web\WE
          > NF\classes\jsp_servlet\_secure\__confirmation.java:378: cannot resolve
          symbol
          >
          > [java] symbol : variable noLinkPageText
          > [java] location: class jsp_servlet._secure.__confirmation
          > [java] htmllink0.setPage(noLinkPageText); //[
          /secure/con
          > mation.jsp; Line: 37]
          > [java] Error: compilation of jsp file /secure/confirmation.jsp (java
          file C
          >
          VSMessageRouter\platform-apps\2notify\webapp\consoleapp\.\web\WEB-INF\classe
          s
          > p_servlet\_secure\__confirmation.java failed):
          > [java] ^
          > [java] null
          > [java] 2 errors
          > [java] Error: [jspc]: 1 file(s) failed:
          > [java] /secure/confirmation.jsp
          > [java] java.io.IOException: Compiler failed
          executable.exec(java.lang.String
          >
          >

Integration 8.1 Works with Weblogic 9.2???

Hi,
I am trying to find out if the latest version of the Integration works with the new released Weblogic 9.2.
I suppose Integration will come with BEA its own IDE and is not Eclipse based.
Can we deploy an 8.1 Inegration Project on weblogic 9.2?
Any answer will be the most appreciated.
Thanks a lot,
Alexandru

I'm pretty certain that a WLI 8.1 project will not work with WLS 9.2.
From what I understand (from public info), the next release of WLI will be version 9.2, and that should come out later this year. The IDE for it will be Workshop for WebLogic, which is Eclipse-based.

Will BPM Tasks JAVA API work with Weblogic+ Jdeveloper 11.1.1.6.0 ?

Hi,
I am working with the JAVA tasks API for working with BPM Human workflows that deals with programmatical interaction with BPM from ADF applications. The same is working fine in ver 11.1.1.4.0.
My Question is that whether the same will be supported in the upcoming versions (may be 11.1.1.6.0) or do I need to change the approach by programmatically calling webservices provided as an out-of-box feature with my BPM.
Much Appreicated !
Regards.

Hi,
I am working with the JAVA tasks API for working with BPM Human workflows that deals with programmatical interaction with BPM from ADF applications. The same is working fine in ver 11.1.1.4.0.
My Question is that whether the same will be supported in the upcoming versions (may be 11.1.1.6.0) or do I need to change the approach by programmatically calling webservices provided as an out-of-box feature with my BPM.
Much Appreicated !
Regards.

Does Creator WAR work with Weblogic 7.x

Hi,
When I try to deploy Creator generated WAR on WebLogic 7.x, I get the following error:
<Feb 21, 2005 4:50:25 PM CST> <Error> <HTTP> <101216> <Servlet: "Faces Servlet"
failed to preload on startup in webapp: "webapp1"
javax.servlet.ServletException
at weblogic.servlet.internal.ServletStubImpl.createServlet(ServletStubIm
Has anybody been able to successfully deploy on Weblogic 7.x and if so what the steps needed to do that, other than simply dropping the WAR file, into the appropriate directory.
Thanks!
Haroon

Hi Haroon,
We have a tutorial we've been working on in this area - here's some of the notes we've got so far - hope it will help!
best,
v
========================================
Configuring the Classpath SettingsCopy the following JAR files from your Java Studio Creator installation directory into a directory of your choosing.
Creator_install_dir/modules/autoload/ext/jstl.jar
Creator_install_dir/modules/autoload/ext/standard.jar
Edit your startWebLogic.cmd (or .sh) file and add the following line. For a default installation of version 8.1 on Microsoft Windows XP, the command file to start the server is at BEA-home\user_projects\domains\creator\startWebLogic.cmd
set CLASSPATH=your_dir\jstl.jar;your_dir\standard.jar;%CLASSPATH%
Restart the application server.
Creating and Configuring a JDBC Data SourceIn the right pane of the console home page, click Service Configurations > JDBC > Data Sources.
Clcik the Configure a New JDBC Sata Source. The JDBC Data Source assistant opens in the right pane.
Enter the following information: Name--Enter a name for this JDBC data source. This name is used in the configuration (weblogic.xml) file. JNDI Name--ENter the JNDI path to where this JDBC data source sill be bound. Click Continue to associate the JDBC data source with a connection pool. Click Configure a new JDBC Connection Pool.
Enter the following Database Type--select the DBMS of the database that you want to connect to.
Database Driver--select the JBDC driver you want to use to connect the database.
Click Continue.
On the Define Connection Properties page provide the information requested. The required attributes vary by the DBMS and JDBC driver you selected in the previous step. Consult your driver's documentation for the correct values. For the Sun Java System JDBC drivers, the classname is com.sun.sql.datasource.DriverAdapter.
Click Continue.
In Test Database Connection, verify the connection properties and then click Test Driver Configuration.
If the text is successful, the Create and Deploy page is displayed. If the test is unsuccessful, check the values on the page, correct any errors, then text the connection again.
In Create and Dploy, select the servers and cluster on which you want to deploy the connection pool. Click Create and Deploy to complete this process.
Exporting the WAR FileYou must create a web application archive (WAR) file for the application that you developed in the Java Studio Creator IDE. The WAR file will contain the complete web application in compressed form..
Open your project in the IDE.
In the Project Navigator, right-click the project name and choose Export WAR file.
In the Export WAR dialog box, choose the J2EE 1.4 specification.
Enter the location to which to export the WAR file and click OK.
Adding weblogic.xml to the WAR
Just like WEB-INF/sun-web.xml, you need a WEB-INF/weblogic.xml file. Create this file and add it to your WAR.
In a command-line window, change to the directory where you saved the WAR file.
Create a subdirectory named WEB-INF.
Change to the WEB-INF directory and create a file called weblogic-web.xml with contents similar to the code shown in the following sample. For the <res-ref-name> and <jndi-name> tags specify the value you entered in the JNDI Name field when you created the JDBC resource.
Code Sample 1: weblogic.xml Code
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE weblogic-web-app PUBLIC '-//BEA Systems, Inc.//DTD Web Application 7.0//EN'
'http://www.bea.com/servers/wls700/dtd/weblogic700-web-jar.dtd'>
<weblogic-web-app>
<resource-description>
<res-ref-name>jdbc/Travel</res-ref-name>
<jndi-name>jdbc/Travel</jndi-name>
</resource-description>
</weblogic-web-app>
Return to the directory that contains the WAR file and update it to include the weblogic.xml file.
jar uf your_app.war WEB-INF/weblogic-web.xml
For more information, visit the BEA website weblogic.xml Deployment Descriptor Elements.
Starting the WebLogic Application Server and Builder ToolStart the WebLogic application server if it is not already running.
Open the WebLogic Builder application and connect it to your WebLogic server.
The right box on the status line should say Connected. If it does not, choose Tools > Connect to Server and fill in the dialog box.
The JavaServer Pages (JSP pages) 1.2 specifications require that JSP containers process tag library descriptor (TLD) files that are embedded in a JAR file.
Adding a Listener to the WebLogic Deployment DescriptorThe JavaServer Pages (JSP pages) 1.2 specifications require that JSP containers process tag library descriptor (TLD) files that are embedded in a JAR file. The IDE relies on this feature to initialize the JSF runtime environment when the application is first loaded. A ServletContextListener is declared inside a tag library descriptor in jsf-impl.jar. WebLogic servers do not implement this feature, so the listener must be explicitly included in the WebLogic deployment descriptor.
Copy the WAR file to another location. Otherwise, the changes you make in this section will be removed when the project is rebuilt or cleaned.
Using the WebLogic Builder, choose File > Open in the Builder main menu. Navigate to the directory you selected in the previous step and select MessagesEx.war.
Click the Listener node in the right-hand tree pane.
Click the Add button.
In the dialog box that appears, enter com.sun.faces.config.ConfigureListener to the listener class text box and click OK. The listener class should now appear in the right pane.
Save the WAR file by choosing File > Save.
The Messages pane (shown in the preceding figure) diaplays Created weblogic.xml. Each application server can define its own XML configuration file(s). One of the primary uses for this file is to connect container-specific resources to a contained application. The WebLogic Builder generates this file automatically. Directly deploying an application created with the Java Studio Creator IDE into a WebLogic server will fail because this file is not generated by the IDE.
Deploying the Application to the WebLogic Server You can now deploy the modified WAR file to the WebLogic server.
In the WebLogic Builder, choose Tools > Deploy Module.
Click the Deploy Module button.
The dialog box closes. The message Module MessagesEx.war descriptors successfully loaded appears in the Builder Messages pane. The application has been deployed to your WebLogic server.
Test your application by opening a web browser and entering the URL http://hostname:7001/MessagesEx, where hostname is the name of your WebLogic server.
The Messages tutorial web page should appear. You can enter sample values into it as described in the Using Message Components tutorial.

How to get remote ejb client working with Weblogic 8.1?

I have Weblogic 8.1 running on a WinXP box behind my firewall. Port 7001 is open to WL and remote browsers can access the console.
I have a client machine running WinXP on a different network that is remote to the WL server. It can ping the WL server machine.
I use JVM 1.4.2_08 on all machines.
If I put my client machine on the LAN with the WL server, then my EJB test client works fine. If I put the client machine on the remote network then the test client fails with a ClassCastException when trying to do a PortableRemoteObject.narrow on the bean home.
I had this running fine on JBoss 3.22 using RMI over HTTP. I added an HTTP invoker service to my jboss.xml file. I don't know if something similar is needed on the Weblogic side - any ideas on that? All I've done on the WL side is turn on Tunneling - which obviously works because the remote client gets a correct home object when doing a lookup on the bean - based on the IOR string of the home obj.
Below I include my client code, exception, ejb-jar.xml and my weblogic-ejb-jar.xml.
Any ideas on what else needs to be done so that a remote client can do a PortableRemoteObject.narrow? My client.jar has all of the EJB classes, and runs fine when run from LAN.
Thanks,
--BobC
Client Code
Properties p = new Properties();
p.put("java.naming.factory.initial", "weblogic.jndi.WLInitialContextFactory");
p.put("java.naming.provider.url", "http://66.114.140.213:7001");
InitialContext ic = new InitialContext(p);
// Test register bean
Object homeObj = ic.lookup("tacplanner/register");
RegisterHome home = (RegisterHome) PortableRemoteObject.narrow(homeObj, RegisterHome.class); // <<< ClassCastException here
Exception
java.lang.ClassCastException
at com.sun.corba.se.internal.javax.rmi.PortableRemoteObject.narrow(PortableRemoteObject.java:293)
at javax.rmi.PortableRemoteObject.narrow(PortableRemoteObject.java:134)
at com.nimblus.tacplanner.test.TestUtils.<init>(TestUtils.java:60)
at com.nimblus.tacplanner.test.TestUtils.main(TestUtils.java:196)
ejb-jar.xml
<?xml version="1.0"?>
<!DOCTYPE ejb-jar PUBLIC '-//Sun Microsystems, Inc.//DTD Enterprise JavaBeans 1.1//EN' 'http://java.sun.com/j2ee/dtds/ejb-jar_1_1.dtd'>
<ejb-jar>
<enterprise-beans>
<session>
<ejb-name>register</ejb-name>
<home> com.nimblus.tacplanner.server.ejb.stateless.RegisterHome</home>
<remote> com.nimblus.tacplanner.server.ejb.stateless.Register</remote>
<ejb-class>com.nimblus.tacplanner.server.ejb.stateless.RegisterSession</ejb-class>
<session-type>Stateless</session-type>
<transaction-type>Container</transaction-type>
<resource-ref>
<description>The Oracle Datasource</description>
<res-ref-name>java:/OracleDS</res-ref-name>
<res-type>javax.sql.DataSource</res-type>
<res-auth>Container</res-auth>
</resource-ref>
</session>
</enterprise-beans>
<assembly-descriptor>
<container-transaction>
<method>
<ejb-name>register</ejb-name>
<method-name>*</method-name>
</method>
<trans-attribute>Required</trans-attribute>
</container-transaction>
</ejb-jar>
weblogic-ejb-jar.xml
<?xml version="1.0"?>
<!DOCTYPE weblogic-ejb-jar PUBLIC
'-//BEA Systems, Inc.//DTD WebLogic 8.1.0 EJB//EN'
'http://www.bea.com/servers/wls810/dtd/weblogic-ejb-jar.dtd'>
<weblogic-ejb-jar>
<weblogic-enterprise-bean>
<ejb-name>register</ejb-name>
<stateless-session-descriptor>
<pool>
<max-beans-in-free-pool>100</max-beans-in-free-pool>
</pool>
</stateless-session-descriptor>
<reference-descriptor>
<resource-description>
<res-ref-name>jdbc/OracleDS</res-ref-name>
<jndi-name>OracleDS</jndi-name>
</resource-description>
</reference-descriptor>
<enable-call-by-reference>True</enable-call-by-reference>
<jndi-name>tacplanner/register</jndi-name>
</weblogic-enterprise-bean>
</weblogic-ejb-jar>
--------------------

Problem solved.
For remote clients you need to generate and use the stub classes for EJB interfaces using Weblogic's appc utility.
See: "http://e-docs.bea.com/wls/docs81/ejb/appc_ejbc.html#1151900"
--BobC

Can't get JSP debugging to work with WebLogic 6.0 and Eclipse 2.1.1

Is native JSP debugging supported in WebLogic 6.0? If so, what are
          the steps involved in getting it to work? I'm in debug mode and my
          servlets will catch at my breakpoints but the JSP pages' breakpoints
          are ignored. I am using compliance level 1.3 and a JRE 1.3. I tried
          to start WebLogic with the 1.4.2 JRE but I get an exception error on
          the WLS JDK name" field. What am I missing here?
          Thanks!


I appear to have solved it, but it is not clear to me why.
I created a jar file of the required classes, and placed it in the same directory as the jsp file. My jsp code then looked like:
<jsp:plugin type="applet" code="nz.astarte.ganttapplet.GanttApplet"
codebase="."
archive="GanttApplet.jar"
jreversion="1.3.1"
width="400" height="175">
<jsp:fallback>
Plugin support could not be determined
</jsp:fallback>
</jsp:plugin>
This works fine. However I would expect to be able to move the jar file to some other directory, so that the jar file and jsp files are separated. I spent hours trying to work out why it wouldn't work when I had the jar
file in WEB-INF/classes (under the jsp file directory) and had codebase="WEB-INF/classes/". In the end I put the jar file into a directory I defined separately called wotnot and defined codebase="wotnot/"
Now it works. However I still think I should be able to have the jar file anywhere, including WEB-INF/classes and would love for someone to tell me why not!
Thanks, Andrew

Add listener to work with weblogic

Similar Messages

Maybe you are looking for