Add new field in Work Order Component Tab

Dear Experts,
Really need your advice to solve my client requirement related to Work Order. The requirement is to put status code and estimated date of returned material in WO Component Tab.
And because we almost use all of fields in Component. So i'm trying to know, is there any configuration (in SPRO - if any) by adding new custom fields in Work Order (WO) Component Tab?.
Or is there any enhancement (EXIT) to add new fields in WO?
Please advice.
Thanks.
LN.

Hi Anthyodaya,
Try this screensexit not sure if this is what you are looking for
EXIT_SAPMV45A_001( Take help of ABAP for this)
Hope this helps.
Thanks and Regards
Rohit
this Question is raised by you twice..please close one.

Similar Messages

  • Add inventory bin number field  to Work Order Components Tab

    Hello,
    Can someone please show me how to add the inventory bin number field to Work Order Components tab.
    Thanks

    Hi Jay,
    Can u help me in understanding as how you achieved this functionality?
    Regards.

  • Add new fields to Sales Order

    Hi All,
    I want to add new fields to the Additional Data A of the sales order header and
      and new fields to the Additional Data A of the sales order item. Can anyone please suggest me if there are any user exits or BADI's for this.
    Thanks,
    Nammi.

    Hi Pavan,
    The BADI which could have been used was BADI_SD_TAB_CUST_H but its made for SAP internal use only.
    if you are working on ECC 6. May be you can try implementing this badi as an extension to SAP standard program and see if it works.
    Regards,
    Vikas
    <b>Encourage by rewarding points if useful.</b>
    Message was edited by:
            Vikas Taneja

  • How do I add new fields to the 'Customer Data' tab under the BP

    I had previously found a screen in the SAP GUI to add fields so that they would show up on the 'Custmer Data' tab under the Business Partner screen. I thought it had been somewhere in se80 but I cannot find it again. Does anyone know where this is? Thank you!

    Hi Mark,
    You can do this using transaction EEWB. This is the Easy Enhancement Workbench.
    within this, you can use the wizard which will guide you through a step by step process to add the fields you need. Basically, there are 2 ways to add new fields  :
    1. Add new fields - this adds fields to table BUT000, but places the fields on a new tab called 'Customer Data'
    2. Add new attributes table - creates a new table and links it to BUT000 using the partner number.
    Hope this helps you.
    Cheers,
    Rishu.

  • How to add a field in sales order header

    Hi all,
    I need to add a custom field say a check box in sales order header in additional data B tab.
    let me know step by step.
    Points will be rewarded.
    Thanks.
    Ramya

    additional data B in sales order
    sales order - Additional data B
    Add new fields to Additional Data B tab in sales order
    Reward Points..

  • Add new fields to additional data tab in customs declaration

    Hello friends,
    My requirement is to add Z fields in the additional data tab in transaction /SAPSLL/CL_CUS_02 of GTS. I would also like to know If its possible to create a new tab all together in /SAPSLL/CL_CUS_02 where in we can add fields from a custom table.
    Thanks a lot in advance. Your help will be highly appreciated.
    Regards,
    Koustubh

    Hi Koustubh,
    As Dave pointed out, there is a BadI for extra tab on declaration Item and Header.
    There is an example implementation already available in the System. I believe that 1 BadI will no be enough for what you need.
    UI enhancement BadI uses standard CUHD and CUIT tables to store the extended data ( via table APPEND ), in order to save content to Z* table you will need a separate BaDI.
    Also, If you intend to use this extra data in outbound message / declaration Idoc, extra BadI has to be used and also the basic IDoc type will need to be extended with your Z* segment. Thats probably 2-3 BadIs working in tandem.
    Can you tell what is the purpose of the extra data / extra tab ?
    Best Regards,
    Branislav Petricek

  • Add New Field in Delivery Tab of  Me21n -which exit

    Hi,
       My requirement is to add a new field(Inspection lot) in Delivery tab of me21n
    kindly help me in which SCREEN EXIT  i have to add the code.
    Advance Thks

    Hi,
    Check this userexit.  MEQUERY1.
    if that doesn't workout check one by one from following.
                                                                                    Enhancement                                                                               
    MEQUERY1                                Enhancement to Document Overview ME21N/ME51N                        
    MEVME001                                WE default quantity calc. and over/ underdelivery tolerance         
    MM06E001                                User exits for EDI inbound and outbound purchasing documents        
    MM06E003                                Number range and document number                                    
    MM06E004                                Control import data screens in purchase order                       
    MM06E005                                Customer fields in purchasing document                              
    MM06E007                                Change document for requisitions upon conversion into PO            
    MM06E008                                Monitoring of contr. target value in case of release orders         
    MM06E009                                Relevant texts for "Texts exist" indicator                          
    MM06E010                                Field selection for vendor address                                  
    MM06E011                                Activate PReq Block                                                 
    MMAL0001                                ALE source list distribution: Outbound processing                   
    MMAL0002                                ALE source list distribution: Inbound processing                    
    MMAL0003                                ALE purcasing info record distribution: Outbound processing         
    MMAL0004                                ALE purchasing info record distribution: Inbound processing         
    MMDA0001                                Default delivery addresses                                          
    MMFAB001                                User exit for generation of release order                           
    MRFLB001                                Control Items for Contract Release Order                            
    AMPL0001                                User subscreen for additional data on AMPL                          
    LMEDR001                                Enhancements to print program                                       
    LMELA002                                Adopt batch no. from shipping notification when posting a GR        
    LMELA010                                Inbound shipping notification: Transfer item data from IDOC         
    LMEQR001                                User exit for source determination                                  
    LMEXF001                                Conditions in Purchasing Documents Without Invoice Receipt          
    LWSUS001                                Customer-Specific Source Determination in Retail                    
    M06B0001                                Role determination for purchase requisition release                 
    M06B0002                                Changes to comm. structure for purchase requisition release         
    MELAB001                                Gen. forecast delivery schedules: Transfer schedule implem.         
    MEFLD004                                Determine earliest delivery date f. check w. GR (only PO)           
    MEETA001                                Define schedule line type (backlog, immed. req., preview)           
    ME590001                                Grouping of requsitions for PO split in ME59                        
    M06E0005                                Role determination for release of purchasing documents              
    M06E0004                                Changes to communication structure for release purch. doc.          
    M06B0005                                Changes to comm. structure for overall release of requisn.          
    M06B0004                                Number range and document number                                    
    M06B0003                                Number range and document number                                                                               
    Business Add-in                                                                               
    ME_GUI_PO_CUST                          Customer's Own Screens in Enjoy Purchase Order                      
    ME_HOLD_PO                              Hold Enjoy Purchase Orders: Activation/Deactivation                 
    ME_PROCESS_COMP                         Processing of Component Default Data at Time of GR: Customer        
    ME_PROCESS_PO                           Enhancements for Processing Enjoy Purchase Order: Intern.           
    ME_PROCESS_PO_CUST                      Enhancements for Processing Enjoy Purchase Order: Customer          
    ME_PURCHDOC_POSTED                      Purchasing Document Posted                                          
    ME_REQ_OI_EXT                           Commitment Update in the Case of External Requisitions              
    ME_REQ_POSTED                           Purchase Requisition Posted                                         
    ME_TAX_FROM_ADDRESS                     Tax jurisdiction code taken from address                            
    MM_EDI_DELFOR_OUT                       Enhancements for IDoc Output of SA Releases: Internal                                                                               
    ME_PURCHDOC_POSTED                      Purchasing Document Posted                                      
    ME_REQ_OI_EXT                           Commitment Update in the Case of External Requisitions          
    ME_REQ_POSTED                           Purchase Requisition Posted                                     
    ME_TAX_FROM_ADDRESS                     Tax jurisdiction code taken from address                        
    MM_EDI_DELFOR_OUT                       Enhancements for IDoc Output of SA Releases: Internal           
    MM_EDI_DESADV_IN                        Supplementation of Delivery Interface from Purchase Order       
    MM_EDI_ORDERS_OUT                       Enhancements for IDoc Output of Purchase Order: Internal        
    SMOD_MRFLB001                           Control Items for Contract Release Order                        
    ME_DEFINE_CALCTYPE                      Control of Pricing Type: Additional Fields                      
    MEGUI_LAYOUT                            BAdI for Enjoy Purchasing GUI                                   
    ME_BSART_DET                            Change document type for automatically generated POs            
    ME_CCP_ACTIVE_CHECK                     BAdI to check whether CCP process is active                     
    ME_CCP_BESWK_AUTH_CH                    BAdI for authorization checks for procuring plant               
    ME_CCP_DEL_DURATION                     Calc. of Delivery Duration in CCP Process (Not in Standard)     
    ME_CHECK_ALL_ITEMS                      Run Through Items Again in the Event of Changes in EKKO         
    ME_CHECK_SOURCES                        Additional Checks in Source Determination/Checking              
    ME_CIN_LEINRF2R                         BADI for CIN India - Delivery charges                           
    ME_CIN_LEINRF2V                         BADI for LEINRF03 excise_invoice_details                        
    ME_CIN_MM06EFKO                         Copy PO data for use by Country version India                   
    ME_CIP_ALLOW_CHANGE                     Configuration in Purchasing: Changeability Control              
    ME_CIP_REF_CHAR                         Facilitates Reference Characteristics in Purchasing             
    ME_COMMITMENT_STO_CH                    BadI for checking if commitments for STOs are active                                                                               
    Assign points if useful.

  • Adding a new field in purchase order tab in Sales Order transcation

    Hi Gurus
       I need to add a new field in header portion 'Purchase order data' with a new field below the telephone no for the transcation VA01.What should I do here?is there any exit or Badi avaiable for this?
    Thanks
    Ganesh

    Check these:
    Add new fields to VA01 Transaction
    http://sap.ittoolbox.com/groups/technical-functional/sap-dev/va01-adding-elements-to-the-screen-392724
    http://sap.ittoolbox.com/groups/technical-functional/sap-dev/add-z-fields-to-additional-data-b-of-va010203-838629

  • Add new fields in Additional data tab B in Inquiry,

    HI,
    I want  to add additional new fields in inquiry on the addition tab -B, like
    Architect Name
    Contractor name
    followed By
    referenced by  like this, and want to capture the report on these fields
    plz guide
    thanks in advace

    Dear Rishi,
    Please Don't post multiple threads for same issue(i.e Add new fields in Additional data tab B in Inquiry).
    Try with these User Exits,
    USEREXIT_MOVE_FIELD_TO_VBAK
    Use this user exit to assign values to new fields at sales document header level. It is described in the section "Transfer of the customer master fields into the sales document".
    The user exit is called up at the end of the FORM routine VBAK_FUELLEN.
    USEREXIT_MOVE_FIELD_TO_VBAP
    Use this user exit to assign values to new fields at sales document item level. It is described in the section "Copy customer master fields into the sales document".
    The user exit is called up at the end of the FORM routine VBAP_FUELLEN.
    USEREXIT_MOVE_FIELD_TO_VBEP
    Use this user exit to assign values to new fields at the level of the sales document schedule lines.
    The user exit is called up at the end of the FORM routine VBEP_FUELLEN.
    USEREXIT_MOVE_FIELD_TO_VBKD
    Use this user exit to assign values to new fields for business data of the sales document. It is described in the section "Copy customer master fields into sales document".
    The user exit is called up at the end of the FORM routine VBKD_FUELLEN.
    I hope this will help you,
    Regards,
    Murali.

  • How to add new field into dynamic internal table

    Hello Expert.
    how to add new field into dynamic internal table.
    PARAMETERS: P_TABLE(30).    "table name
    DATA: I_TAB TYPE REF TO DATA.
    FIELD-SYMBOLS: <TAB> TYPE standard TABLE.
    *Create dynamic FS
    create DATA I_TAB TYPE TABLE OF (p_table).
      ASSIGN I_TAB->* TO <TAB>.
    SELECT * FROM (p_table) INTO TABLE <TAB>.
       here i want to add one more field into <TAB> at LAST position and my 
       Field name  =  field_stype     and
       Field type    =  'LVC_T_STYL'
    could you please helpme out .

    Hi,
    Please find the code below.You can add the field acc to your requirement.
    Creating Dynamic internal table
    TYPE-POOLS: slis.
    FIELD-SYMBOLS: <t_dyntable> TYPE STANDARD TABLE,  u201C Dynamic internal table name
                   <fs_dyntable>,                     u201C Field symbol to create work area
                   <fs_fldval> type any.              u201C Field symbol to assign values 
    PARAMETERS: p_cols(5) TYPE c.                     u201C Input number of columns
    DATA:   t_newtable TYPE REF TO data,
            t_newline  TYPE REF TO data,
            t_fldcat   TYPE slis_t_fldcat_alv,
            t_fldcat   TYPE lvc_t_fcat,
            wa_it_fldcat TYPE lvc_s_fcat,
            wa_colno(2) TYPE n,
            wa_flname(5) TYPE c. 
    Create fields .
      DO p_cols TIMES.
        CLEAR wa_it_fldcat.
        move sy-index to wa_colno.
        concatenate 'COL'
                    wa_colno
               into wa_flname.
        wa_it_fldcat-fieldname = wa_flname.
        wa_it_fldcat-datatype = 'CHAR'.
        wa_it_fldcat-intlen = 10.
        APPEND wa_it_fldcat TO t_fldcat.
      ENDDO. 
    Create dynamic internal table and assign to FS
      CALL METHOD cl_alv_table_create=>create_dynamic_table
        EXPORTING
          it_fieldcatalog = t_fldcat
        IMPORTING
          ep_table        = t_newtable. 
      ASSIGN t_newtable->* TO <t_dyntable>. 
    Create dynamic work area and assign to FS
      CREATE DATA t_newline LIKE LINE OF <t_dyntable>.
      ASSIGN t_newline->* TO <fs_dyntable>.
    Populating Dynamic internal table 
      DATA: fieldname(20) TYPE c.
      DATA: fieldvalue(10) TYPE c.
      DATA: index(3) TYPE c. 
      DO p_cols TIMES. 
        index = sy-index.
        MOVE sy-index TO wa_colno.
        CONCATENATE 'COL'
                    wa_colno
               INTO wa_flname. 
    Set up fieldvalue
        CONCATENATE 'VALUE' index INTO
                    fieldvalue.
        CONDENSE    fieldvalue NO-GAPS. 
        ASSIGN COMPONENT  wa_flname
            OF STRUCTURE <fs_dyntable> TO <fs_fldval>.
        <fs_fldval> =  fieldvalue. 
      ENDDO. 
    Append to the dynamic internal table
      APPEND <fs_dyntable> TO <t_dyntable>.
    Displaying dynamic internal table using Grid. 
    DATA: wa_cat LIKE LINE OF fs_fldcat. 
      DO p_cols TIMES.
        CLEAR wa_cat.
        MOVE sy-index TO wa_colno.
        CONCATENATE 'COL'
                    wa_colno
               INTO wa_flname. 
        wa_cat-fieldname = wa_flname.
        wa_cat-seltext_s = wa_flname.
        wa_cat-outputlen = '10'.
        APPEND wa_cat TO fs_fldcat.
      ENDDO. 
    Call ABAP List Viewer (ALV)
      CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
        EXPORTING
          it_fieldcat = fs_fldcat
        TABLES
          t_outtab    = <t_dyntable>.

  • BADI for Updating work order component data

    Hi,
    I need to update the field special stock indicator for the work order component data when it is saved. I am using the BADI WORKORDER_UPDATE for the same, but when I implemented the ZWORKORDER_UPDATE_IM using the standard defenition  WORKORDER_UPDATE , the code does not allow me to change the it_component internal table belonging to the BEFORE_UPDATE method. Could you please help me in this.
    Basically if we are implementing a standard defenition how to change the parameters of the methods in it.
    Regards,
    Prabaharan.G

    Hi ,
    It is giving the below dump. The parameter is importing parameter and it does not allow to change even using field symbol. Is there any other way. Is there an user exit which will be called when pressing enter button in component screen. The exit EXIT_SAPLCOBT_001 did not work for this.
    Error analysis                                                                     
        The program tried to assign a new value to the field "<F_FS1>" even though     
        it is protected against changes.                                                                               
    The following objects are protected:                                           
        - Character or numeric literals                                                
        - Constants (CONSTANTS)                                                        
        - Parameters of the category IMPORTING REFERENCE for functions                 
          and methods                                                                  
        - Untyped field symbols to which a field has not yet been assigned             
          using ASSIGN                                                                 
        - TABLES parameters if the corresponding actual parameter is protected         
          against changes                                                              
        - USING reference parameters and CHANGING parameters for FORMs if              
          the actual parameter for this is protected against changes    
    Regards,
    Prabaharan.G

  • How to add new fields to Profit center screen (KE51)

    Dear All,
    I have a requirement that to add new fields to the Create Profit center screen KE51.
    I couldn't find the user exits for the same.
    Please help me in this.
    Thanks.
    Ravi

    Hello Ravi,
    I must respcetfully disagree(with other posts) that it is not possible to extend CEPC.  In our system we have added an append with two new fields to CEPC.  Now, that was the easy part. You must also find a way to maintain those fields when creating and changing profit centres.  To do this it was necessary for us to add a button to the create/modify screens.  It was also necessary to find a few enhancement spots in order to make this work(and it still is not perfect).   I am being very vague here because even though it is posible I would not recommend implementing this solution.  It was very time consuming and could be risky if you miss something.  There is a reason why you can find so little information in SDN and other places about how to do this.  Other, including myself have tried but it was painful.
    I know that this does not help very much.
    Regards
    Greg Kern

  • How to add new fields in Web UI where AET is not applicable

    Hi,
    We tried to add new fields using AET, but surprisingly 'Create Field' is in disabled mode in AET Configuration.
    We are trying to add custom fields to the view GSTEXT/notes. But we could not do that.
    what are the other possible ways to add custom fields and the required configuration for that.
    Your help and suggestions will be highly appreciated.
    Best regards,
    Venkat

    Hi,
    Thanks for the response, We want to add two custom fields in Component / View (Gstext / Note).
    We are trying with AET tool, But in AET tool configuration window, ''Create Field'' is in not in active mode (disabled mode), we can see it but it is not clickable.
    In order to proceed and create new fields it has to be in enabled.
    Kindly suggest me how to activate this field. your suggestions will be highly apprecaited.
    Thank you
    Venkat

  • Want to add new field in QA32/QA11 transaction under inspection lot stock

    Dear Experts,
    I want to add new field in QA32 transaction under inspection lot stock tab or under characteristic tab.
    The reason behind is: Depends upon UD decision i want to assing customer name. So already we are having one Z Report for all the lots against this lot we have to display customer name.
    So in order to fetch customer name in the Z report we want to assing customer through F4 selection in the usage decision  screen.
    I know this is possibe for Make to order scenario, but our senario is make to stock.
    Please advice your valuable inputs.
    Regards.

    Hi Sujit,
    Can you please elaborate it,coz i'm using the same but if i place the break-point in PBO of sub screen,the break-point won't be triggered.and is there any additional step to get the data from function group? if yes, please explain me indetail.
    If possible please provide the sample code for this.
    Thanks Inadvance.
    Madan
    Edited by: Madan.ngt on Mar 3, 2011 7:16 AM
    Edited by: Madan.ngt on Mar 3, 2011 7:17 AM

  • Add new field

    Hi all,
    I need to add a new field for sales order in additional data a tab.  I have two user exits MV45Aozz and mv45AIzz ( user modules fo rPBO and PAI). Need to update 3 standard table. VBAK, LIKP, BBRK.
    Plz help me in this regard,
    1. Do i need to create any FM, user_customXXX for this user exit.
    2. If I add the field to these standard tables will that field automatically apears on the screan.
    3. Help me with some useful links for user exits of this kind.
    appreciate you for spending your valuable time for helping me !
    Thanks in advance,
    Mohan.

    hi,
    to 1.
    You can put your coding directly into the user-Exit. A fm is recommended, when there are several developer on the System. with a fm you cane capsule your coding an do the transport independante form other developers.
    to 2.
    while adding Fields to a table, there is no automatic apperance of a screan. You have th modify this by your own.
    You mentioned 3 tables --
    VBAK - i modify in MV45AFzz or MV45AFZB
    LIKP -- i modify only in rv50AFZ1 - user exit save prepare
    Für the userexits in the delivery there is a good note avalible in oss
    bbrk i don't know.
    hans

Maybe you are looking for