Add-on installation problem in Windows Server 2003

Hi guys,
I have a problem when i want to install my add-on in the Windows Server 2003. The server gives me error :
Unable to load AddOnInstallAPI.dll
and when i try install using the same installer at the client station, everything is ok.
Does anybody have suggestion about that problem? I suspect the problem is the Windows' security that did not allowed me to load the .dll. Does anybody know how to set the security?
Thanks you,
Harianto Ng

I've found an answer on the similar question here, on the forum, saying that Windows 2003 is not a supported SAPBO Client OS.
In my experience I could not even set a reference to SAPbouicom.exe with a message "cannot load DLL"...
Natalya

Similar Messages

Java2SDk 1.4.2.06 installation problem on Windows Server 2003

I tried the installation of Java2SDk 1.4.2.06. ,I tried this, but it fails to complete and NO directory folder is created so I cannot continue with the proccess. The OS is Windows Server 2003.
I have done the following procedures:
Enabled/Disabled the IIS configuration
Enabled/Disabled the Windows Firewall
Enabled/Disabled Antivirus software
The error in the event log is:
Event Type: Error
Event Source: Application Error
Event Category: (100)
Event ID: 1000
Date: 3/6/2007
Time: 2:23:49 PM
User: N/A
Computer: GERSSERVER
Description:
Faulting application msiexec.exe, version 3.1.4000.1433, faulting module unknown, version 0.0.0.0, fault address 0x0013b43e.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 41 70 70 6c 69 63 61 74 Applicat
0008: 69 6f 6e 20 46 61 69 6c ion Fail
0010: 75 72 65 20 20 6d 73 69 ure msi
0018: 65 78 65 63 2e 65 78 65 exec.exe
0020: 20 33 2e 31 2e 34 30 30 3.1.400
0028: 30 2e 31 34 33 33 20 69 0.1433 i
0030: 6e 20 75 6e 6b 6e 6f 77 n unknow
0038: 6e 20 30 2e 30 2e 30 2e n 0.0.0.
0040: 30 20 61 74 20 6f 66 66 0 at off
0048: 73 65 74 20 30 30 31 33 set 0013
0050: 62 34 33 65 b43e
Please advice on this problem. Other tech support recommendations were to reinstall the OS.
I have also tried installing the latest version of Java 2 SDK without success.
Thanks for your support
William Hernandez
UPR-Mayaguez Campus

Thank you so much for your help!
I have just tried as you said. Now I see that actually at the beginning of the intallation, there is a NullPointerException. Here is the error information:
===============================
Checking available disk space...
Checking Java(TM) 2 Runtime Environment...
Launching Java(TM) 2 Runtime Environment...
java.lang.NullPointerException
at sun.java2d.SunGraphics2D.revalidateAll(SunGraphics2D.java:2086)
at sun.java2d.SunGraphics2D.drawString(SunGraphics2D.java:2536)
at com.sun.wizards.awt.Header.paint(Header.java:112)
at sun.awt.RepaintArea.paint(RepaintArea.java:177)
at sun.awt.windows.WComponentPeer.handleEvent(WComponentPeer.java:260)
at java.awt.Component.dispatchEventImpl(Component.java:3678)
at java.awt.Component.dispatchEvent(Component.java:3477)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:456)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchTh
read.java:201)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThre
ad.java:151)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:145)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:137)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:100)
===============================
Please help me out of this. Thank you.

Installation problem with windows server 2003 64 bit

I downloaded all hyperion components from e-deleivery for windows server 2003 64 bit when i tried to install it a message said that some component are not compatible when i removed stratigic finance and FDM components the installation started and completed .in the configuration phase many components failed to configured and here's a copy of the log file:
(Nov 21, 2010, 02:25:51 PM), com.hyperion.cis.config.wizard.adapter.WizardFormAdapterPanel, ERROR, The specified database is already configured.
(Nov 21, 2010, 02:30:34 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Error:
java.lang.NumberFormatException: null
     at java.lang.Integer.parseInt(Unknown Source)
     at java.lang.Integer.valueOf(Unknown Source)
     at com.hyperion.hit.registry.ServiceComponentImpl.getPort(ServiceComponentImpl.java:45)
     at com.hyperion.hub.HubAppServerDeployer.checkOpenLDAPFromRegistry(HubAppServerDeployer.java:282)
     at com.hyperion.hub.HubAppServerDeployer.updateOpenLDAPPort(HubAppServerDeployer.java:175)
     at com.hyperion.hub.HubAppServerDeployer.preDeploy(HubAppServerDeployer.java:113)
     at com.hyperion.cis.config.AppServerDeployer.preDeploy(AppServerDeployer.java:205)
     at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.executeAppDeploymentTask(RunAllTasksWizardAction.java:604)
     at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.execute(RunAllTasksWizardAction.java:215)
     at com.installshield.wizard.RunnableWizardBeanContext.run(Unknown Source)
(Nov 21, 2010, 02:41:18 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Shared Services Registration task can not be executed because Shared Services instance is not available in Registry
(Nov 21, 2010, 02:43:35 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Shared Services Registration task can not be executed because Shared Services instance is not available in Registry
(Nov 21, 2010, 02:45:21 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Shared Services Registration task can not be executed because Shared Services instance is not available in Registry
(Nov 21, 2010, 02:45:21 PM), com.hyperion.awb.config.AWBDBConfigurator, ERROR, Error:
java.lang.NullPointerException
     at com.sun.org.apache.xerces.internal.dom.ElementImpl.normalize(Unknown Source)
     at com.sun.org.apache.xerces.internal.dom.ElementImpl.normalize(Unknown Source)
     at com.sun.org.apache.xerces.internal.dom.ElementImpl.normalize(Unknown Source)
     at com.sun.org.apache.xerces.internal.dom.ElementImpl.normalize(Unknown Source)
     at com.hyperion.awb.config.PIRegistartionXMLWriter.updateHubDetails(PIRegistartionXMLWriter.java:265)
     at com.hyperion.awb.config.AWBDBConfigurator.configure(AWBDBConfigurator.java:249)
     at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.executeDbConfigTask(RunAllTasksWizardAction.java:658)
     at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.execute(RunAllTasksWizardAction.java:202)
     at com.installshield.wizard.RunnableWizardBeanContext.run(Unknown Source)
(Nov 21, 2010, 02:45:21 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Error:
com.hyperion.cis.config.ProcessingException
     at com.hyperion.awb.config.AWBDBConfigurator.configure(AWBDBConfigurator.java:275)
     at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.executeDbConfigTask(RunAllTasksWizardAction.java:658)
     at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.execute(RunAllTasksWizardAction.java:202)
     at com.installshield.wizard.RunnableWizardBeanContext.run(Unknown Source)
(Nov 21, 2010, 02:47:29 PM), com.hyperion.cis.config.CmsRegistrationUtil, ERROR, There is no logical instance of Shared Services web application in Registry
(Nov 21, 2010, 02:47:29 PM), com.hyperion.awb.config.AWBAppServerDeployer, ERROR, Error occured in deRegisterOldProductInstance(): null
(Nov 21, 2010, 02:47:29 PM), com.hyperion.cis.config.CmsRegistrationUtil, ERROR, There is no logical instance of Shared Services web application in Registry
(Nov 21, 2010, 02:47:29 PM), com.hyperion.awb.config.AWBAppServerDeployer, ERROR, ERROR:
com.hyperion.cis.config.AppDeployException: CMS Client cannot be created
     at com.hyperion.awb.config.AWBAppServerDeployer.publishBPMAInstanceDocument(AWBAppServerDeployer.java:704)
     at com.hyperion.awb.config.AWBAppServerDeployer.registerProductInstance(AWBAppServerDeployer.java:796)
     at com.hyperion.awb.config.AWBAppServerDeployer.postDeploy(AWBAppServerDeployer.java:350)
     at com.hyperion.cis.config.AppServerDeployer.postDeploy(AppServerDeployer.java:336)
     at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.executeAppDeploymentTask(RunAllTasksWizardAction.java:610)
     at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.execute(RunAllTasksWizardAction.java:215)
     at com.installshield.wizard.RunnableWizardBeanContext.run(Unknown Source)
(Nov 21, 2010, 02:50:11 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Shared Services Registration task can not be executed because Shared Services instance is not available in Registry
(Nov 21, 2010, 02:51:11 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Shared Services Registration task can not be executed because Shared Services instance is not available in Registry
(Nov 21, 2010, 02:54:20 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Shared Services Registration task can not be executed because Shared Services instance is not available in Registry
(Nov 21, 2010, 02:58:04 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Shared Services Registration task can not be executed because Shared Services instance is not available in Registry
(Nov 21, 2010, 02:58:16 PM), com.hyperion.essbase.config.EssbaseAgentTaskProcessor, ERROR, Error in executing the script to register Essbase as a service: exitCode = 1
(Nov 21, 2010, 02:58:54 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Shared Services Registration task can not be executed because Shared Services instance is not available in Registry
(Nov 21, 2010, 02:59:15 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Shared Services Registration task can not be executed because Shared Services instance is not available in Registry
(Nov 21, 2010, 02:59:16 PM), com.hyperion.planning.HspDBConfigurator, ERROR, Error happened: Index: 0, Size: 0
(Nov 21, 2010, 02:59:16 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Error:
com.hyperion.cis.config.ProcessingException
     at com.hyperion.planning.HspDBConfigurator.configure(HspDBConfigurator.java:209)
     at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.executeDbConfigTask(RunAllTasksWizardAction.java:658)
     at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.execute(RunAllTasksWizardAction.java:202)
     at com.installshield.wizard.RunnableWizardBeanContext.run(Unknown Source)
(Nov 21, 2010, 03:03:06 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Shared Services Registration task can not be executed because Shared Services instance is not available in Registry
(Nov 21, 2010, 03:05:34 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Shared Services Registration task can not be executed because Shared Services instance is not available in Registry
(Nov 21, 2010, 03:19:29 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Shared Services Registration task can not be executed because Shared Services instance is not available in Registry
(Nov 21, 2010, 03:19:30 PM), com.hyperion.hfm.config.HfmDbConfigurator, ERROR, Error while configuring HFM DatabaseEntry does not exist for these parameters in tnsnames.ora file.
(Nov 21, 2010, 03:19:30 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Error:
com.hyperion.cis.config.ProcessingException
     at com.hyperion.hfm.config.HfmDbConfigurator.configure(HfmDbConfigurator.java:151)
     at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.executeDbConfigTask(RunAllTasksWizardAction.java:658)
     at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.execute(RunAllTasksWizardAction.java:202)
     at com.installshield.wizard.RunnableWizardBeanContext.run(Unknown Source)
(Nov 21, 2010, 03:19:39 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Error:
java.lang.NullPointerException
     at com.hyperion.hfm.config.HfmAppServerTaskProcessor.execute(HfmAppServerTaskProcessor.java:105)
     at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.executeCustomTask(RunAllTasksWizardAction.java:741)
     at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.execute(RunAllTasksWizardAction.java:188)
     at com.installshield.wizard.RunnableWizardBeanContext.run(Unknown Source)
if any one installed hyperion EPMS on windows server 2003 64 bit please i need your help
thanks in advanced
Edited by: eng3m on Nov 21, 2010 3:32 PM

Hi,
EDGE/Crystal Reports Server and Enterprise are no native 64bit applications. That does mean that they only run in 32bit mode. But you can install it on a 64bit hardware with a 64bit OS.
Regards
-Seb.

Installation problem on windows server 2008 r2 datacenter edition 64bit

hi
today, i tried to install the current maxdb 7.8 release on my virtual server with a windows server 2008 r2 datacenter 64bit edition os. at the first installation, i got an error message something with "rte runtime error". at this point, the installation stopped.
because of this error, i tried to uninstall the failed installation. this was not possible, in the uninstaller, i didn't see any components, so i can't uninstall.
so i tried to delete the files manually: the entries in the start menu, and the application's path under "program files"... first, i need to kill a process named "serv.exe", that creates a tcp daemon under port 7200... after killing it, the deletion of the dir in program files was successful.
this is very very weird, now my server is "contaminated" with an uncomplete uninstallation of maxdb...
why maxdb 7.8 has problems on windows server 2008 r2 datacenter 64bit edition???
thanks for feedbacks!
regards, jan

> no, because i canceled this virtual server - another method to solve this problem. (i have really no time for things like that..!)
If you take the time to give exact error messages then someone will be certainly able to help
> on windows server 2003, there are NO problems.
Windows 2003 != Windows 2008 - they use a different kernel, a different security system (UAC) and other features that may prevent a succesfull installation in the first place.
I installed a MaxDB 7.8 just today on Windows 2008 R2 and it worked fine.
Markus

Printing problems on Windows server 2003

Hi All,
I was printing perfectly on my shared printer (HP Laserjet 1000) on my Windows server 2003 with a domain.
Since this week I can't print anymore. I keeps failing with failed authentification. Nothing changed on my server or iMac except the latest security patches on the iMac.
The event log shows up user _lp that is trying to access the printer... not the user that I'm using...
I tried to uninstall and reinstall the printer on the iMac without success.
Anyone has an idea how to fix this ?
Thanks,
Pascal

I'm having the same problem now with printers on Windows 2000 systems. The print queue (which worked forever on 10.4 and initially on 10.5) now gets access denied from the SMB server. The "add authentication" thread doesn't fix it as the latest update seems to send user ID "_lp" to the SMB server rather than the user credentials set up in CUPS.
I tried "smb://user:password@server/printer" and it still doesn't work.
Again, it's worked for a long while and just recently broke due to Leopard or an update.
-Rick

How do I add a Mac to a Windows Server 2003 or 2008 domain?

I recently started working for a public school district that runs Windows Server 2003 and Windows Server 2008 R2. There are several faculty members, myself included, that would like to get their Macs onto the domain and capable of file sharing, printing to network printers, etc. I cannot find decent instructions anywhere. Could someone please point me in the right direction or give me some directions? It would be greatly appreciated. Thanks.

I'm also new to the MAC world - I trust you were able to join the MAC's to the domain - I finally figured it out. However, I have not been able to get the MAC's to save to the Windows 2008 server where I have student folders setup. Have you been able to do this? If so can share the info with us.
Thanks,
Steve
[email protected]
Newport School District

Oracle 11gR2 installation problem on Windows Server 2008 R2 datacenter

Hi
I am trying to install Oracle 11Gr2 64 bit on Windows server 2008 R2.The system configuration is "Intel Xeon, RAM 8.00 GB.
i
The installation is getting paused at the 8th step of Oracle installation.Neither i am getting any error message nor an entry is recorded in the Oracle inventory log.
It is showing a blank screen after the prerequiste checks are complete.
Request you to help me out in resolving the issue.
Thanks in advance for your cooperation.

Hi Helios
Thanks for the response. The database is still not created to check in the Alert log .It is still in the phase of pre-requisite checks. I did not go with Silent installation.It is a plain single instance installation.
The installation screen is greyed out with out any message or error.
Please could you share if you have any thoughts on this.

OEM_Agent DST problem with window server 2003

Hi,
I didn't apply the dst patch to my OEM and Agent, system administrator said he applied the OS patch. so as expected, after the reboot of server, the oem_agent won't start any more.
the error message:
'Mon Mar 19 12:40:14 2007::The agentTZRegion value in E:\OEM_agent10g\agent10g/sysman/config/emd.properties is not in agreement with what agent thinks it should be.Please verify your environment to make sure that TZ setting has not changed since the last start of the agent.
If you modified the timezone setting in the environment, please stop the agent and exectute 'emctl resetTZ agent' and also execute the script mgmt_target.set_agent_tzrgn(<agent_name>, <new_tz_rgn>) to get the value propagated to repository -----
I am on eastern timezone.
Following the Metlink note 401834.1"Workaround to EM Agent Restart Problem Due to a Daylight Savings Change".
I did ' emctl resetTZ agent on my target machine.
then, I run ' exec mgmt_target.set_agent_tzrgn('server123:3872','Etc/GMT+4');
It's not helping.
On window, the time is right, but the timezone is still set as 'GMT-5'.
A querry shows:
select timezone_region from mgmt_targets where target_name='server_name':
TIMEZONE_REGION
America/New_York
If I do exec mgmt_target.set_agent_tzrgn('server123:3872','Etc/GMT+5' , it's still not working....
Any one has any suggestion? I thought window should have different timezone after apllying the DST patch?
Thanks in advance

Hi, mnazin:
Thanks for helping.
Here is the last entry on emagent.trc
2007-03-21 15:05:34 Thread-2232 DEBUG TargetManager: In getTypeAndNameForHostTarget
2007-03-21 15:05:34 Thread-2232 DEBUG TargetManager: getTypeAndNameForHostTarget found host, xxxxxxxxxxx
2007-03-21 15:05:34 Thread-2232 WARN collector: Regenerating all DefaultColls
2007-03-21 15:05:40 Thread-2232 ERROR upload: Failed to upload file A0000001.xml, ret = -6
2007-03-21 15:05:40 Thread-2232 ERROR upload: 3 Failures in a row for A0000001.xml, we give up
2007-03-21 15:05:40 Thread-2232 ERROR upload: Error in uploadXMLFiles. Trying again in 72.00 seconds or earlier.
2007-03-21 15:05:42 Thread-860 WARN upload: FxferSend: received fatal error in header from repository: https://xxxxxxxxxxxxxxxx:1159/em/upload
FATAL_ERROR::500|ORA-20603: Updating timezone region of a target is not supported. Use mgmt_target.set_agent_tzrgn() API to modify the timezone region.(target name = xxxxxxxxxxxxxxxxx:3872)(target type = oracle_emd)(new tzrgn = America/New_York)(old tzrgn = america/new_york)
ORA-06512: at "SYSMAN.CHECK_DUPLICATE_TARGETS", line 92
ORA-04088: error during execution of trigger 'SYSMAN.CHECK_DUPLICATE_TARGETS'
2007-03-21 15:05:42 Thread-860 ERROR upload: number of fatal error exceeds the limit 3
2007-03-21 15:05:42 Thread-860 ERROR upload: agent will shutdown now
2007-03-21 15:05:42 Thread-860 ERROR : Signalled to Exit with status 55
2007-03-21 15:05:42 Thread-2772 ERROR main: EMAgent abnormal terminating
--where is emoms.trc located? in Oracle_agent/sysman/log, I don't see that file.

Windows Server 2003 R2 Backup with Hyper-V in DPM

Hello,
I am trying to backup multiple Windows Server 2003 R2 VMs on Hyper-V (Windows Server 2012 R2) with DPM.
When I try to this I get the following errors:
On the Hyper-V Host:
Source: VSS ID:8229
A VSS writer has rejected an event with error 0x800423f4, The writer experienced a non-transient error. If the backup process is retried,
the error is likely to reoccur.
. Changes that the writer made to the writer components while handling the event will not be available to the requester. Check the event log for related events from the application hosting the VSS writer.
Operation:
   PrepareForSnapshot Event
Context:
   Execution Context: Writer
   Writer Class Id: {66841cd4-6ded-4f4b-8f17-fd23f8ddc3de}
   Writer Name: Microsoft Hyper-V VSS Writer
   Writer Instance ID: {0b5be050-91e2-41a6-9207-414f1291f975}
   Command Line: C:\Windows\system32\vmms.exe
   Process ID: 5312
Source: Hyper-V-VMMS ID: 18014
Checkpoint operation for 'VMName' was cancelled. (Virtual machine ID D605FC49-D379-4C60-A730-485C8E9279DC)
Source: Hyper-V-VMMS ID: 18012
Checkpoint operation for 'VMName' failed. (Virtual machine ID D605FC49-D379-4C60-A730-485C8E9279DC)
Source: Hyper-V-VMMS ID: 10150
Could not create backup checkpoint for virtual machine 'VMName': Element not found. (0x80070490). (Virtual machine ID D605FC49-D379-4C60-A730-485C8E9279DC)
Source: Hyper-V-Worker ID: 3280
'VMName' could not initiate a checkpoint operation: Element not found. (0x80070490). (Virtual machine ID D605FC49-D379-4C60-A730-485C8E9279DC)
Source: Hyper-V-VMMS ID: 16010
The operation failed.
The Output of vssadmin list writers on the Hyper-V Host looks like this:
Writer name: 'Microsoft Hyper-V VSS Writer'
   Writer Id: {66841cd4-6ded-4f4b-8f17-fd23f8ddc3de}
   Writer Instance Id: {0b5be050-91e2-41a6-9207-414f1291f975}
   State: [8] Failed
   Last error: Non-retryable error
In the Windows Server 2003 R2 VM there are no errors in the eventlog.
Only the information, that VSS is started and stopped after a while.
When I do a Backup with ntbackup of in the VM everything runs fine.
When I create a checkpoint with Hyper-V everything runs fine, too.
The integration services are up to date and get-vmintegrationservice -vmname VMName shows everything is enabled and OK.
On the Hyper-V host there are 13 VMs. 3 of them are running Windows Server 2003 R2 and 2 of them are showing this error. It seems to be no general problem with Windows Server 2003 R2 then.
I tried the backup on a different Hyper-V host with no success.
How can I narrow down the cause of this error?
Thanks.
greets,
torsten

Thank you to everyone in this thread!
After digging through VSS and Hyper-V dead-ends, the solution above worked for me in a W2012 R2 environment.
I only had this problem trying to back up W2012 R2 Hyper-V VMs stored on a CSV, hosted on a W2012 R2 Host Cluster, backing up from a Host node. I could back up from within the guests fine. Both Windows Server Backup and DPM 2012 R2
gave VSS errors on the cluster hosts.
In fact Windows Server Backup complains with 80780189 it won't back up an application with files on a CSV, which is a common cluster configuration. This is an example of another caveat in a minefield of MS caveats buried in fine print which often negates
configurations touted by MS Marketing, things which sound great on a sell sheet, but in practice are impractical or just not production-ready because of these restrictions.
Disabled Backup in Integration Services, performed an offline back up from DPM 2012 R2 (which did briefly affect serving the workloads on the VM), which succeeded, and then re-enabled Backup in Integration Services. DPM then continued to
sync successfully after that for a day. However, this problem returned after a period of heavy DPM backup activity. So I redistributed backups through various Protection Groups to spread the DPM load over a longer period and this seems to
have solved this problem.
In general I had lots of problems installing, configuring, and now operating DPM, so the experience has not been smooth, but most of the problems have now been solved. I find you have to "baby" this product and not push it too hard,
otherwise things start breaking.
Thanks again everyone!
DPM Error ID 30111 0x800423F4
DPM-EM Event ID 3106

Word Document generation using Perl programming on Windows Server 2003 R2

Hello,
Our application generates word document based on pre-defined template on Windows Server 2003 using Perl Scripting.
Configuration data is fetched from the database and document is populated based on the template. Sections in the document are identified using Bookmarks. We are facing a problem on Windows server 2003 R2. When I do a group update operation, i.e generation
of multiple word documents (using Word 2010) in a loop, one of the section of the word document shifts up and data gets overlapped.
When I use the same piece of code in windows 7 machine, the issue doesn't replicate.
Can anyone provide some pointers to look into this issue ?
Regards
Prashant Jain
software developer

Hi,
This forum is mailly talk about the product use related issue and not the best place to talk about the develop issue, for the develop issue we can post in MSDN forum for the further help.
MSDN forum
https://social.msdn.microsoft.com/Forums/en-US/home
Thanks for your understanding and support.
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Windows server 2003 not working after computer hard restart

Hello, the following problem did occure. I was logged to windows server 2003, working on it, when my pc suddenly frozen, so i had no other option, than to make a hard restart of my pc. From that time, when a log into the windows server, i can see the server
desktop, but i cannot click on anything. I am hearing just the clicking sound. When i minimalize it a maximalize it back, all i can see is a black screen.
Can anyone help me, how to solve this problem ?
Thank you for your answers

Hi,
According to your description, my understanding is that Windows Server 2003 unable to start correctly.
You may try to restart the computer, when you see the message Please select the operating system to start, press the F8 . select the
Last Known Good Configuration, in order to start the computer by using the most recent settings that worked.
Or you may select Windows Advanced Option –> Safe Mode, check to see if this was caused by faulty drivers, programs, or services that start automatically.
More methods about troubleshooting startup problem, you may reference the link below:
How to troubleshoot startup problems in Windows Server 2003
http://support.microsoft.com/kb/325375/en-us
Best Regards,
Eve Wang

SMB Extremely Slow over VPN With Windows Server 2003

Hello everyone,
I finally convinced another person at my law firm to switch to a MacBook Pro. In preparation, I am attempting to fix any compatibility problems that would put off this new user. Unfortunately, our IT guy recently switched us to a Sonicwall SSL-VPN 200. I can connect to our server through the VPN client with no problems and I can mount our internal file server, but the connection is incredibly slow. My initial reaction was that it must be a problem with Windows Server 2003 and SMB, but I was previously able to connect to and operate on our VPN through our old Fortinet (ipsec) device with no problems. Simply put, directory switching, file moving, etc. are all now incredibly slow over the VPN. Help!

Full support for SMB signing did not appear until Samba 3.0.2 released in 2004. Mac OS X 10.5 (Leopard) supports SMB signing. Previous versions require either disabling SMB signing server-side, using a third party SMB client, using the command-line smbclient program, or updating samba yourself.

Oracle 8 installation problem on windows 2003 server

Hi!everyone
while installing i'm getting the message "could not delete the windows nt services". The error is coming for the service "OracleTNSListener".
any solution?...
any info whether oracle 8 support has been stopped for all platforms/specific ones ?...where do i get that info ?....
plz help..

Hi!
Is there any work around to that? Basically I have to test an upgrade from 8i to 10g on a Windows Server 2003 w/ SP1. I am not sure on what platform that 8i database is running on because is at a third-party location.

Errors in installation of SAP XI on MSCS windows server 2003

We have started installing our XI QAS on a MSCS running windows server 2003. We've followed the installation guide and loaded the Oracle binaries onto each node and the latest patches, have installed oracle failsafe (3.2.2) - done all the DNS & TCP/IP checks, installed abap and abap DB on central instance, and started configuring MSCS using SAPInst - all this successfully completed....
The problem we are having are:
In the Oracle Failsafe Manager, when trying to move <SID>.world from standalone resource to cluster service we get the following errors (after completing all actions on Node A - errors appear to relate to Node B) ....
FS-10890: Oracle Services for MSCS failed during the add operation
FS-10778: The database resource provider failed to configure the the cluster resource <DBSID>.world
FS-10040: Failed to create the database resource <DBSID>.world
ORA-01078: failiure in processing system parameters...
The settings are then rolled back......
I've not had any luck on either the oracle site or sap site finding solutions to these problems.
We've checked all permissions - all okay, Oracle homes are correct, Ip addresses (public and private) are all correct, and now running out of ideas...
Anyone have any ideas??
I can provide more information is needed....
Message was edited by: Barry Neaves

The line in the log right before the error messages reads:
49 09:07:17 > FS-10427: Creating database instance <DBSID> for TNS service name <DBSID>.WORLD
I assume it this part that failed..... It took ten seconds before listing the error messages.....
Any thoughts??

Error in Installation of EPM 11.1.1.3 in windows server 2003-32 bit, AMD 64

Hi All,,
We are trying to install EPM 11.1.1.3 ( We are trying to install only Client Components ) in server machine( Processor AMD64, OS: Windows Server 2003 32Bit) we are installing the JAVA 1.6 Also.But we double Click the InstallerTool.cmd it will open the command prompt and throws an error below and disappearing.
"R:\essbase\\jre\win32\1.6.0\"\..\..\..\installTOOL.jar
>
R:essbase>endlocal
R:essbase>pause
Press any key to continue...
This is an error while double click the Installertool.cmd
If it is Java Compatibility, how can we resolve it.
We are trying to another XP machine with the same dump it is working
But in Windows Server machine it is not working.
For installation of client components only, is Java 1.6 installation is required??
Could you pls help me What is the Problem
It will graetful appreciate to resolve it
Thanks in Advance.........

Hi
1. Did you delete tmp and cache after patching
2. Did you clear the cached files in your browser post patching
3. Generally the first time you access the system it takes time but the consquent attempts should not take much time.
4. Did you increase the Java heap
     ex: HFMWeb
HKEY_LOCAL_MACHINE\SOFTWARE\Hyperion Solutions\HFMWeb0\HyS9FinancialManagementWeb_epmsystem1
                JVMOption21 | - Xms2048m
                JVMOption38 | - Xmx2048m
Next,
When you are accessing the HFM Application please monitor the task manager and let us know the CPU and Physical Memory utilisation.Monitor the HSVDatasource.exe process .
How much RAM do you have on your server and how many applications/components are hosted on that server?
Thanks
Anjum

Add-on installation problem in Windows Server 2003

Similar Messages

Maybe you are looking for