Add Order as a Filter to a Report

Hi Experts,
Iam a Bw Report called Bonus tracking report and Iam supposed to add Order as a filter to it.
How can I do that?
Thanks
SP

Hi,
I think your users are looking for a variable on Order InfoObject. You can place Order in the rows or free chars area and restrict with a variable.
Hope this helps...

Similar Messages

How to add filter in Bex report

hi how to add filter in BEx report and what is the difference between filter and free charcteristics.
Regards,
Viren.

Hi Viren,
difference between filter and free characteristics is that free characteristics can be added to drilldown at query runtime. Filter values can not be changed at query runtime.
You can add a filter to a query by placing a characteristic in filter section and restrict the characteristic to certain values. Characteristics in rows / columns / free characteristics section can be restricted to certain values, too.
Best regards,
Björn

How to add an Event action filter when victim address is " na "?

Using VMS/IPS MC to add an event action filter. IPS MC requires an victim address in the event action filter, however the alert in Security Monitor has "<na>" as the victim address.
I tried "0.0.0.0 255.255.255.255", which caught the alerts that had victim addresses, but the alerts with victim address of <na> are still being reported.
The signatures are 3250 and 3251 (tcp hijacks).

marcabal has posted a very good explanation for sig 3030 here:
http://forums.cisco.com/eforum/servlet/NetProf?page=netprof&type=EmailAFriend&CommCmd=MB%3Fcmd%3Dpass_through%26location%3Doutline%40%5E1%40%40.1dd9b49a%2F0#selected_message
It may also explain some of the other problems.
I would like to add that in any field usually means that the signature does not require anything in that field in order to fire, and therefore, it is truly "not applicable". In the referenced post, marcabl indicated that filters should be a little more controllable in version 5.1. However, we haven't upgraded from 5.0 yet so I couldn't confirm that. I would hope that regardless of whether the data is applicable to the signature or not, the sensor would gather and display the information in SecMon.
With 3030, it came down to a question of, "is this signature really helping us keep this network secure?" I pulled a lot of hair out over that signature.

Filter on the reports created using DIRECT DATABASE ACCESS in obiee 10g

How do i filter on the report that is created by using DIRECT DATABASE ACCESS in obiee 10g?
I have reprot A with link to report B, report B is created using DIRECT DATABASE ACCESS. so it is just a table, but i need to filter out 2 columns.
here is the query in REPORT B:
select strm, acad_group, crse_id, class_section, count(emplid) from v_crse_enrl
group by crse_id, strm, class_section, acad_group;
the link in REPORT A:
'<a target="_blank" href="'||VALUEOF("bi_link")||'Go&Path=CF_CROSS_TEACHING_LIST&ACTION=Navigate&col1=STRM&val1='||view1_DIMEN.STRM||'&col2=CLASS_SECTION&val2='||TRIM(view1_DIMEN.CLASS_SECTION)||'">' ||view1_dimen.class_id||'</a>'
from this link to report B.
thank you!!

I didnt tested using url, but the same works with using presentation variables.
To your direct sql add where clause for those two columns like WHERE col='@{col1}' and col ='@{col2}'
and try to run from url.
let me know updates

How to add user e-mail to a custom report?

Hello,
I am not a sql DBA, but trying to find out exact line that I should add to the query for any custom report, to show user e-mail address field as well.
For example, I use this query for all machines running unwanted software (found this query on google) :
Select
SD.Name0,
sys1.User_Name0,
SF.FileName
From v_r_system sys1
join v_gs_softwarefile sf on sf.resourceid=sys1.resourceid
left join v_R_User usr on usr.User_Name0=sys1.User_Name0
left Join v_R_System SD on SD.ResourceId = SF.ResourceId
Where SF.FileName Like '%Azureus%'
Or SF.FileName Like '%ABC%'
Or SF.FileName Like '%BitComet%'
Order By SD.Name0, SF.FileName, sys1.User_Name0
I do have user discovery enabled with mail attribute, and can see e-mail address getting collected for all the users.
Thanks in Advance

In case it's SQL/SSRS, which I assumed based on the initial query, then your query should look like this:
Select
SD.Name0,
sys1.User_Name0,
usr.Mail0,
SF.FileName
From v_r_system sys1
join v_gs_softwarefile sf on sf.resourceid=sys1.resourceid
left join v_R_User usr on usr.User_Name0=sys1.User_Name0
left Join v_R_System SD on SD.ResourceId = SF.ResourceId
Where SF.FileName Like '%Azureus%'
Or SF.FileName Like '%ABC%'
Or SF.FileName Like '%BitComet%'
Order By SD.Name0, SF.FileName, sys1.User_Name0
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

How to add order reason code field to selection screen of VL10

Hi,
How to add Order reason code(vbak-augru) to the selection screen of VL10.
1. How to find enhancement for it?
2.I want to display Order reason code field on output list also?
3.Pls give steps i am new to enhancements
thanking u advance...
surya

Hi,
there is no user exit available for this report program, one alternative is copy the program associated with this standard program i.e. RVV50R10C to a Z program and modify it as per your requirement or if you want to modify the standard program you need access key.
Regards,
Raghavendra

Rank function without filter in the report

Hi,
I have a problem with Rank() function. The problem is the next one.
I have a table with this rows:
User | DATE | Cost
user1 | 12/02/2011 | 10,4
user1 | 13/02/2011 | 11,1
user1 | 13/02/2011 | 10,1
user1 | 13/02/2011 | 8,1
user2 | 12/02/2011 | 1,4
user2 | 13/02/2011 | 12,1
user2 | 13/02/2011 | 22,1
user2 | 13/02/2011 | 8,1
In the rpd I have a agregate row as SUM(COST), and I need extract te ranking of this SUM(COST) per user, The sum of user1 is 39,7 and the sum of the user 2 is 43,7. If I show in the report all users, the ranking is correct Rank=1 per user2 and Rank=2 per user1, but the problem is that I only want show the user1, when I add a filter to the report user='user1' the ranking value changes from 2 to 1. I need that the ranking value doesn´t change when I introduce a filter.
Any idea about how to solve this problem?
Thanks

Hi Antonio,
On the Rank column in the answers edit the formula as given below.
Case when username = 'user2' then Rank(sum(cost)) else 0 end
Then apply a filter on the Rank column as Rank > 0.
I hope this one helps you.
Regards
AP

Search/Filter through Interactive Report!

Hi All,
First of all WISH a very Happy New Year-2010!!
In my previous post for Search/Filter through Interactive Report!
I am facing problem with UI as mentioned below can any one help me out on this, as this an urgent for me...
At last i was able to was able to retrieve the data from Iframe using different logic!!
But i want to modify some of the modifications in UI Design..
As i have informed u that End user always selects the Page-85 which is visible to them..
In that page(85) i have totally created three regions.
1. Attribute Report(Intearctive report)
2. Manage Attribute(HTML where i have give iframe syntax as {iframe ID="Attribute Report" src="" style="width:520;" FRAMEBORDER=0></iframe>
3. Create/Edit Region
FYI: There is a create button in Attrinbute Report and when i click on that Button then only i wil display the Create/Edit Region
Now the problem is end user are using pixels as 1024*756 size, when i have tried to increase the size of width in iframe, the create/edit region is crossing and
need to scroll down to check the data.
Let us assume if i had reduced the size of width as default 520 then create/edit region is placed with in pixcels.
As u know there is a button called as "GetResults" in page-85 when i clik on that button we will call the iframe which is a hidden page where end user
can not view.
The main problem is that in that page i mean page-45, it has desgined in such a way that it is similar to page-85 which is having with all 3 regions!!
When it will display the report from iframe for that the scrolloing is displayed, and when i had click on create button in that iframe the credit/edit region is
displayed but for that there to scroll down which is not happy by endsuer.
In order to overcome this i had tried to increase the width in iframe which is working for one not for the other or viceversa.
Suggestion: Can u suggest me how to fix the pixcels so that it will not excceds the pixecls size?
What i had thought is in page-85 i have created totally 4 regions instead of 3 regions as shown below:
1. Attribute Region
2. manage Attribure(With Iframe)
3. manage Attribute(With out iframe but used one hidden varibable ans set that hidden in condtional region)
4. Create/Edit Region.
And i am setting that hidden variable in Create button, so that i can call the second manage attribure with iframe.. When i have tried to use that it is throwing script error as "style is null or nor an object", i belive scince we are hidinng that region it migh not able to identify that style!!!
Can u suggest me the way i have done i had implemenetd is sounds goods for u? Or else can u help me out how to fix that UI design issue...
Thanks in advance,
Anoo..

Hi Andy,
As per your suggestion i have created two pages!. One is 85 page and 45 page, but foe enduser can see only the 85 page.
In 85 page i have created a interactive report as shown below:
SELECT distinct attr_code "EDIT", attr_code, attr_description, attr_atcl_code,
attr_abbreviation,
attr_include_short_desc "Include short desc",
attr_include_long_desc "Include long desc",
attr_attr_type "AttrType", attr_code "DELETE"
FROM t_append WHERE EXISTS (SELECT 1
FROM APEX_APPLICATION_PAGE_IR_COND
WHERE APPLICATION_ID = :APP_ID
AND PAGE_ID = :APP_PAGE_ID
AND CONDITION_ENABLED = 'Yes'
AND APPLICATION_USER = :APP_USER) ORDER BY attr_description;
In the same page itself i have created a One more region, where i have one select list and submit button, when there select fro the list and click on submit button then popup should fired, i mean what u have mentioned. For that i have created a new page called 45 where i have two regions one is HTML region and second is interactive report.
I html region i have given like this in source
<iframe src="f?p=&APP_ID.:85:&SESSION." style="width:500; height:1000;" FRAMEBORDER=0></iframe>
but i am not able to see the template at all?
Pls correct i way i have done is correct or not.
Also i was not able to see the Region as - Popup one ( where i can see the popup option?)
Thanks,
Anoo..

How to add OLE wordpad objects to a crystal report through VB program

Can we programmatically add OLE wordpad objects to a crystal report XI r 2. through VB.NET or VB6?
And is there a way of treating a database binary/blob field as an ole object in CR?

Hi Mohan,
Try it in the Designer first. If it works in the designer then it will work in our SDK's but you'll have to use RAS. So when you post your question to the .NET Development - Crystal Reports Forum be sure to specify what version you are using and anything else as far as versions go.
It may be easier to simply link the OLE Object in the designer, check the help file out on how to.
Thank you
Don

How to add the dril down functionality in alv report.

Hi All,
I have a ALV report and now i want to add drill down functionality in this ALV report.
See my code below:
FORM f0002_build_field_catalog.
Build the field catalog
CLEAR ws_layout.
ws_layout-colwidth_optimize = 'X'.
ws_layout-edit = ' '.
ws_field_catalog-col_pos = '1'.
ws_field_catalog-fieldname = 'BUKRS'.
ws_field_catalog-tabname = 'I_OUTPUT'.
ws_field_catalog-seltext_l = 'Company Code'.
ws_field_catalog-seltext_m = 'CCode'.
ws_field_catalog-seltext_s = 'CCode'.
ws_field_catalog-fix_column = 'X'.
ws_field_catalog = 'X'.
ws_fieldcat-ref_tabname = 'VBKPF'.
APPEND ws_field_catalog TO lt_fieldcat.
CLEAR: ws_field_catalog.
ws_field_catalog-col_pos = '2'.
ws_field_catalog-fieldname = 'BELNR'.
ws_field_catalog-tabname = 'I_OUTPUT'.
ws_field_catalog-seltext_l    = 'Document no.'.
ws_field_catalog-hotspot = 'V'.
ws_field_catalog-seltext_m    = 'Doc.no.'.
ws_field_catalog-seltext_s    = 'Doc.no.'.
APPEND ws_field_catalog TO lt_fieldcat.
CLEAR: ws_field_catalog.
ws_field_catalog-col_pos = '3'.
ws_field_catalog-fieldname = 'GJAHR'.
ws_field_catalog-tabname = 'I_OUTPUT'.
ws_field_catalog-seltext_l    = 'Year'.
ws_field_catalog-seltext_m    = 'Year'.
ws_field_catalog-seltext_s    = 'Year'.
APPEND ws_field_catalog TO lt_fieldcat.
CLEAR: ws_field_catalog.
ws_field_catalog-col_pos = '4'.
ws_field_catalog-fieldname = 'BSTAT'.
ws_field_catalog-tabname = 'I_OUTPUT'.
ws_field_catalog-seltext_l    = 'Status'.
ws_field_catalog-seltext_m    = 'Status'.
ws_field_catalog-seltext_s    = 'Status'.
APPEND ws_field_catalog TO lt_fieldcat.
CLEAR: ws_field_catalog.
ws_field_catalog-col_pos = '5'.
ws_field_catalog-fieldname = 'FLAG'.
ws_field_catalog-tabname = 'I_OUTPUT'.
ws_field_catalog-seltext_l    = 'Open/Cleared'.
ws_field_catalog-seltext_m    = 'Open/Cleared'.
ws_field_catalog-seltext_s    = 'Open/Cleared'.
APPEND ws_field_catalog TO lt_fieldcat.
CLEAR: ws_field_catalog.
ws_field_catalog-col_pos = '6'.
ws_field_catalog-fieldname = 'BLART'.
ws_field_catalog-tabname = 'I_OUTPUT'.
ws_field_catalog-seltext_l    = 'Doc.Type.'.
ws_field_catalog-seltext_m    = 'Doc.Type'.
ws_field_catalog-seltext_s    = 'Doc.Type'.
APPEND ws_field_catalog TO lt_fieldcat.
CLEAR: ws_field_catalog.
ws_field_catalog-col_pos = '7'.
ws_field_catalog-fieldname = 'WRBTR'.
ws_field_catalog-tabname = 'I_OUTPUT'.
ws_field_catalog-seltext_l    = 'Total Amount'.
ws_field_catalog-seltext_m    = 'Total Amount'.
ws_field_catalog-seltext_s    = 'Total Amount'.
APPEND ws_field_catalog TO lt_fieldcat.
CLEAR: ws_field_catalog.
ws_field_catalog-col_pos = '8'.
ws_field_catalog-fieldname = 'WAERS'.
ws_field_catalog-tabname = 'I_OUTPUT'.
ws_field_catalog-seltext_l    = 'Currency.'.
ws_field_catalog-seltext_m    = 'Currency'.
ws_field_catalog-seltext_s    = 'Currency'.
APPEND ws_field_catalog TO lt_fieldcat.
CLEAR: ws_field_catalog.
ws_field_catalog-col_pos = '9'.
ws_field_catalog-fieldname = 'LIFNR'.
ws_field_catalog-tabname = 'I_OUTPUT'.
ws_field_catalog-seltext_l    = 'Vendor'.
ws_field_catalog-seltext_m    = 'Vendor'.
ws_field_catalog-seltext_s    = 'Vendor'.
APPEND ws_field_catalog TO lt_fieldcat.
CLEAR: ws_field_catalog.
ws_field_catalog-col_pos = '10'.
ws_field_catalog-fieldname = 'NAME1'.
ws_field_catalog-tabname = 'I_OUTPUT'.
ws_field_catalog-seltext_l    = 'Vendor Name'.
ws_field_catalog-seltext_m    = 'Name 1'.
ws_field_catalog-seltext_s    = 'Name 1'.
APPEND ws_field_catalog TO lt_fieldcat.
CLEAR: ws_field_catalog.
ws_field_catalog-col_pos = '11'.
ws_field_catalog-fieldname = 'UZAWE'.
ws_field_catalog-tabname = 'I_OUTPUT'.
ws_field_catalog-seltext_l    = 'Payment Method Supplement'.
ws_field_catalog-seltext_m    = 'PmtMthSuppl'.
ws_field_catalog-seltext_s    = 'PmtMthSuppl'.
APPEND ws_field_catalog TO lt_fieldcat.
CLEAR: ws_field_catalog.
ws_field_catalog-col_pos = '12'.
ws_field_catalog-fieldname = 'XBLNR'.
ws_field_catalog-tabname = 'I_OUTPUT'.
ws_field_catalog-seltext_l    = 'Reference'.
ws_field_catalog-seltext_m    = 'Ref. No.'.
ws_field_catalog-seltext_s    = 'Ref. No.'.
APPEND ws_field_catalog TO lt_fieldcat.
CLEAR: ws_field_catalog.
g_variant-report = sy-repid.
   CLEAR struct_extab.
MOVE '&XPA' TO struct_extab-fcode.
APPEND struct_extab TO i_extab.
MOVE '&OMP' TO struct_extab-fcode.
APPEND struct_extab TO i_extab.
Display the list
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
   EXPORTING
      i_callback_program      = ws_repid
      i_callback_user_command = 'HANDLE_USER_COMMAND'
     is_layout               = ws_layout
      it_fieldcat             = lt_fieldcat[]
      it_excluding            = i_extab[]
     i_default                = 'X'
     i_save                  = 'U' "For user variants
     is_variant              = g_variant
    TABLES
      t_outtab                = i_output.
ENDFORM.                    "f0002_build_field_catalog
*&      Form f0038_pf_status
      text
     -->I_EXTAB    text
FORM f0038_pf_status USING i_extab TYPE slis_t_extab.       "#EC CALLED
CLEAR struct_extab.
MOVE '&XPA' TO struct_extab-fcode.
APPEND struct_extab TO i_extab.
MOVE '&OMP' TO struct_extab-fcode.
APPEND struct_extab TO i_extab.
SET PF-STATUS 'Z_PFSTATUS2' EXCLUDING i_extab.
ENDFORM.                     "f0038_pf_status
Pls tell me how i use this below dril down ability functionality in my code.
See the requirement below.
The Document Number, aka Accounting Document Number (BELNR) of each row will take the user to the appropriate document to edit as follows:
For Parked documents:-
If VBKPF-AWTYP (Reference Procedure) = RMRP, then the drilldown functionality should be to MIR4 using the Object ID in VBKPF- AWKEY. In this scenario the Object ID represents a Invoice Document Number, not an Accounting Document Number. Not the Object ID is a combination of Invoice Document Number and Fiscal Year
If VBKPF-AWTYP = Any other value, then the drilldown functionality should be to FBV2 using the Object ID in VBKPF-AWKEY. In this scenario the Object ID represents a true Accounting Document Number. Note the Object ID is a combination of Company Code (VBKPF-BUKRS), Accounting Document Number (VBKPF-BELNR) and Fiscal Year (VBKPF-GJAHR)
For Posted, not Cleared documents:-
Drilldown ability should be to FB02. The combination of Company Code (BSIK-BUKRS), Accounting Document Number (BSIK-BELNR) and Fiscal Year (BSIK-GJAHR) will be used to open/drilldown to the correct document in FB02.
For Cleared documents:-
Drilldown ability should be to FB03. The combination of Company Code (BSIK-BUKRS), Accounting Document Number (BSIK-BELNR) and Fiscal Year (BSIK-GJAHR) will be used to open/drilldown to the correct document in FB03.
Its very urgent, pls help on this.
Thanks!
Vipin

Pls refer :
https://wiki.sdn.sap.com/wiki/display/Snippets/ABAPInteractiveALVwithCallTransaction%28usingParameterID%29
https://wiki.sdn.sap.com/wiki/display/Snippets/ABAPInteractiveALV+Program
Regards,
Anish Thomas
Pls reward all useful answers

Add Macro in BO 4.0 Webi reports

Hi All,
Is it possible to add macros in BO 4.0 webi reports.
My requirement is I want one macro to be run when we schedule the report in excel formate.
Thanks in Advance.

Hi,
No, i'm afraid not. This is a Desktop Intelligence feature that hasn't been ported over to WebI yet ..
You should add your vote to this enhancement request : https://cw.sdn.sap.com/cw/ideas/3654
Regards,
H

Clear Filter on Interactive Report

I created an application in Application Express 4.2.0.00.27. Four of the pages have interactive reports. I applied the filter to the report on page 46 to show only rows with LAST_NAME LIKE ‘%JONES%’ and the rows are filtered correctly. When I navigate to the calling page 12 and then back to page 46 the filter is still in effect. The clear cache on the calling page 12 is checked. Is there a property of the page or report which will clear the filter on page 46?

See Linking to Interactive Report in the documentation.
To reset an interactive report in a link, use the string "RIR" in the Clear-Cache section of a URL. This is equivalent to the end user choosing the Reset option from the interactive report actions menu on the target page. The report is returned to the default report settings specified by the developer or saved by the user.

Can you filter a custom report by postcode? I want to send an email marketing campaign to customers

Can you filter a custom report by postcode? I want to send an email marketing campaign to customers within a postcode range. How do you do this? Thanks.

Hey RP in Oz,
You can run a contacts report and select 'Default Address Type' as an 'Address Details Field' which will include the zip code a customer has inputted. You can then export the report, open it up in Excel (or similar) and filter based on the postcode. Once you have modified the list in excel, formatted it correctly and are satisfied, you can then import the report as a mailing list via E-Mail Marketing > Mailing Lists.

Can I add a third party filter (ASFROC) to the filter sub-folder of Photoshop Elements 13?

I have been using a third party filter (Applied Science fiction R-O-C (now Kodak)) with Photoshop elements 9. After upgrading to Elements 13 I would like to continue using the ASFROC plug-in filter. Can I just add it to the Filter sub-folder in Elements 13?

I believe the problem is those filters are 32 bit filters and you most likely have the 64 bit version of photoshop elements 13.
The 64 bit version of pse 13 requires 64 bit filters, so you wouldn't be able to use the Kodak filters in pse 13
Which operating system are you using?
If windows, is your windows system 32 or 64 bit?
(the mac version of pse 13 is always 64 bit)

How to add a parameter to sql query in report

Hi
How to add a parameter to sql query in report.
Parameter is from Visual studio
example:
select * from tab1 where dl=parameter???
I have VS 2008 prof CR XI R2, mysql

Hello,
If you have this API available then you can modify the record selection formulae in code to add filtering:
string recordSelectionFormula = "{T_INV_RPT_ADDR.IND_PROMUS} = {?P_PROMUS?} AND {T_INV_RPT_POINT.INVOICE_DATE} = DATE(2008, 05, 31) AND {T_INV_RPT_POINT.CHECKOUT_DATE} = date(2008, 04,29)";
CrystalDecisions.CrystalReports.Engine.ReportDocument.RecordSelectionFormula = recordSelectionFormula;
You have to format and follow the rules as in the Designer so not too much work to get this to work.
CR for .NET may not have the ability so you will need to upgrade to a Developer version of Crystal Reports.
Thank you
Don

Add Order as a Filter to a Report

Similar Messages

Maybe you are looking for