Add people analysis not working in Elements 11
Hello,
The Add People feature has stopped working in Elements 11. I just get the message "no new people found in your selection". Yet, when i open a picture there will be faces that are marked in the photo awaiting tagging. I have thousands of photos and having to open each one individually just to tag faces is not why i purchased this software. It worked well in version 10 and was much better in 11 until it stopped working.
It worked great until about 3 weeks ago. I have not changed any settings on my end. I have followed the directions on the following threads:
http://forums.adobe.com/message/5097047
http://forums.adobe.com/message/5192495
To date:
I have reset to default settings
I renamed the psa.prf, status.dat and the peoplestatus.dat files.
Neither of those have worked. Short of uninstalling and re-installing i am at my wits end. Any help would be greatly appreciated.
RD
Please see if following works:
1. In your catalog folder, rename 'BreezeSession.dat' file (Catalog folder location can be found by Help->System Info) and see if that helps.
2. Select the image in small batch and then click on 'add people'.
~Andromeda
Similar Messages
-
I've read the threads and done numerous searches. Not sure why the add row button isn't working, other buttons work.
Here's what I've found and done.
Print button subform - positioned (have tried flowed, too) allow page breaks
Table: body rows vary - Insert wrap in subform - subform flowed - allow page breaks
row 1 binding - repeat row for each data item - min 1, max 25 (why won't it keep an initial count when I try putting in 1 or 0?)
Form properties - preview in dynamic PDF, interactive - PDF render format dynamic xml, run in 9.0 or later (to remove errors)
Insert Row Button in Subform Row 1 Cell 1 (not counting header row) on click, JavaScript run at client tried table.row1.instancemanager.addinstance(1); also tried full path
saved as dynamic pdf
My hierarchy looks like:
form1 [autofit]
master pages
page 1
untitled content area
printbuttonSubForm [flowed, top to bottom, allow page breaks]
untitled subform [flowed, top to bottom, allow page breaks]
printbutton1
tablesf [flowed, top to bottom, allow page breaks]
table1 [allow page breaks]
headerRow
cell1
cell2 etc
Row1 [allow page breaks, repeat row for each data item, min 1, max 25 (why won't it keep an initial count when I try putting in 1 or 0?)]
subform [allow page breaks, repeat row for each data item, min 1, max 25
(why won't it keep an initial count when I try putting in 1 or 0?)]
button1 table1.row1.subform1.instanceManager.addinstance(1);
cell2, etc
Referenced objects
Questions:
I click the Add Row button, but nothing happens, why? The print button works.
Found a reference to def instances of same row, what does that mean?
Is my hierarchy correct?
How to set Form1 to flow? Object says mixed objects with no options
Many thanks for your assistance! LeslieHi Leslie,
There could be a few things.
First check that the form is saved as Dynamic XML in the save as dialog. If it is saved as Static the add instance will not work.
Make sure that the object you are targetting is set to repeat in the Object > Binding tab
Check your syntax in the script editor (button above the editor). Some of your post is not camel case. For example addInstance and instanceManager. Note the capital letter for the second word.
If you could share your form it would be easier to track down what the problem is. You can use Acrobat.com or YouSendIt.com or some other file sharing site. Just remember to post the published URL.
Good luck,
Niall -
Raw not working on elements 10
raw not working on elements 10 can anyone tell me why ? cheers
It works on my system.
Are you on Windows or MAC?
Have you tried starting to the editor and going to Help -> Updates ?
What camera produces the RAW images?
What error do you see?
Brian -
PowerPoint add-in is not working when installed for All Users using msi installer.
Hi All,
I have created PowerPoint add-in using c#-vsto. I have created msi installer to install this add-in with following two options:
1. Just me
2. Everyone
However, add-in is not working properly (Events and custom task panes are not working).
I have created registry key as below
1. for "Everyone" : HKLM\Software\Microsoft\Office\Powerpoint\Addins\MyAdd-in
2. for Just me : HKPU\Software\Microsoft\Office\Powerpoint\Addins\MyAdd-in
But when I set InstallAllUsersVisible property to False (When add-in is installed only for current user ), then add-in works fine for current user.
Please let me know if anything is missing!!!
ThanksHi,
This is the forum to discuss questions and feedback for Microsoft Office, the issue is more related to develop the add-in, you'd better post your question to the MSDN forum for VSTO
http://social.msdn.microsoft.com/Forums/en-US/home?forum=vsto&filter=alltypes&sort=lastpostdesc
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
George Zhao
TechNet Community Support -
Why does Flickr share not work in Elements 9?
When I try to use it a message appears 'its being worked on' This has been an issue for 4 days. What do I do to use Flickr?
I'm really new to this forum business. Is there a difference between Photoshop elements and plain Elements? I thought I was in a forum that could answer my question about Flickr not working in elements or photoshop elements 9. I need someone to lead me out of the desert and deliver me to a place where I'll find what I'm looking for.
Is there a Moses in this forum to help me????????????
and thanks in advance. -
I have worked many hours on an iphoto book and I am up to page 29. I cannot add any more pages past that and I need to! Please help!! "Add page" is not working!!!
Fixed it thanks to similar questions and answers to them. Thanks all!
-
Elements 11 -- add people, does not appear to work
Have selected a sub set of photo's with many people in the photo's. When I then go to the bottom of the page and hit "add people" .. it goes thru and say none to add. Yet there are plenty of people in the photo's to add. What am i doing wrong?
Hi there,
Oracle Label Security can be combined with Enterprise User Security:
part ONE: http://www.oracle.com/technology/deploy/security/db_security/howtos/eus-how-to.html
part TWO: http://www.oracle.com/technology/deploy/security/db_security/howtos/ols_oid-how-to.html
So users and OLS policies are created and maintained in the Oracle LDAP directory (Oracle Internet Directory).
Did you check dbms_session.set_context, and sys_context?
Hope this helps,
Peter -
People analyzer not working in photoshop 11 with D800 RAW photos
I have photoshop elements 11. People analyzer will not reconize people or allow me to tag people in my photos. It works with my older camera photos such as from my Nikon D300 but will not work with photos from my D800 (RAW).
As follows:
Elements Organizer 11.0.0.0
Core Version: 11.0 (20120830.r.32025)
Language Version: 11.0 (20120830.r.32025)
Current Catalog:
Catalog Name: Master Catalog2011
Catalog Location: D:\Master Catalog2011\
Catalog Size: 77.3MB
Catalog Cache Size: 741.5MB
System:
Operating System Name: Windows 7
Operating System Version: 6.1 Service Pack 1
System Architecture: Intel CPU Family:6 Model:10 Stepping:7 with MMX, SSE Integer, SSE FP
Built-in Memory: 16GB
Free Memory: 13.5GB
Important Drivers / Plug-ins / Libraries:
Microsoft DirectX Version: 9.0
Apple QuickTime Version: Not installed
Adobe Reader Version: 9.4
Adobe Acrobat Version: Not installed
CD and DVD drives:
E: (TSSTcorp CDDVDW BUS: 1 ID: 1 Firmware: SH-216AB) -
Stacks not working on Elements 12 install
Installed new Elements 12 (not upgrade) and converted Elements 9 catalog (no problem indicated on conversion). Stacks and Version stack does not work in converted catalog. Get error "Create Stack Failed" and when creating version from edit save, new file is not stacked or added to catalog but file is created. Stacks from original 9 ctalog were converted and can be expanded and contracted. What is going on?
Known bug. See http://forums.adobe.com/thread/1328850 for workaround and link to add your vote to the bug report.
Cheers,
Neale
Insanity is hereditary, you get it from your children
If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks. -
Calc defined in Web Analysis not working properly with substitution vars
Hi all,
Most likely many of you have already faced this, and I would appreciate any guidance. Most likely is a rookie mistake.
1.- We have a couple of substitution variables in Essbase, CurrYear and PrevYear
2.- We can see those substitution variables perfectly in Web Analaysis, when designing the report ($CurrYear and $PrevYear) for the Years dimension
3.- We use this susbtitution variables into a calculation defined in Analysis Tool (i.e $CurrYear:Actual / $PrevYear:Actual) where 'Actual' is the value for scenario.
4.- The value of the substitution variables is changed in essbase (i.e. CurrYear equals FY10 and Prev Year equals FY09) to update for the current year
5.- In the reports, whenever we use $CurrYear and $PrevYear, outside a calculation defined in analysis tools, it works properly
6.- However, the calculations defines as in (3.-) before, do not work. I get 'value not found'
7. If I 'refresh' the formula in the calculation, by editing it and taking out/reentering the operands again, it now works.
We have tried restarting Web Analysis services, but we still get the same behaviour
We have several of this calculations in about 15 reports, so, even while it is manegeable, the idea of using the substitution variables was to avoid this.
We are using Hyperion 9.3.1
Thank you in advance to anyone who can point me in the right direction
HectorHi,
Oracle support recommended that we apply patch 9.3.1.3, since they were unable to replicate in their environment with said version. After applying the patch, we still have the same problem, they are further investigating.
Regards,
Hector -
Why does the Organizer not work with Elements 12 on my Mac?
My wife has a Mac (OSX 10.6.8) and I recently bought her Elements 12. The organizer does not work on it? Is there any plan to have it work? I was told by a friend that support should be able to get it work for me.
Hi Barbara
Thanks for the response.
I updated to Mavericks (10.9.3) and the organizer now appears to work.
However, it is extremely slow in previewing photos that were already on
the Mac and does not appear to be able to download photos from a Canon
5DIII. It appears to start but then spins and spins. It ran overnight
and was unresponsive this morning.
Do you have any ideas as to what to do to make this work?
Will -
Reporting and analysis not working in workspace
the startup document specified does not exist in the repository. select a new startup document on the general preference tab.
when i click ok
a not found error occurred communicating with server
click show details
uri: http://server:19000/raframework/conf/toolsconfig.xml
state 404 not found
and then when i click preference, the reporting and analysis framework seems to be not working because for example for financial reporting and web analysis, we can see things like $(/raframework.....epmstatic/raframework.....etc)
any help would be fine regarding waht i could have done wrong
thanksHas it ever worked, have you checked the logs, have you logged into Oracle Support and had a look the documents available e.g. 1422178.1
Cheers
John
http://john-goodwin.blogspot.com/ -
Acrobat XI Pro "add text comment" not working
In Acrobat, my "Add Text Comment" comment feature no longer works. I am using Acrobat XI Pro on Win7.
The property "Locked" vs Make Property Default fix on these forums did not work for me.
When I click on a document to add a text comment,
1. Acrobat creates a small square (uneditable)
2. Acrobat adds a comment to the comments list
I am unable to type any text, nor edit the box, nor change the box's size, nor see the properties.
Any thoughts are appreciated as to how to fix this feature.
MichaelHi cpa-michael,
If this issue appears in any PDF that you try to add comments to, please repair the Acrobat installation by choosing Help > Repair Acrobat Installation.
If the issue appears only in one PDF file, that PDF may be damaged and you can try Saving As to repair the document, or you can try to "refry" the PDF by printing to PDF from within Acrobat.
Best,
Sara -
Infopath form people picker not working in outlook 2010
Hi,
I have created custom task form which has reassign feature. If the form is opened in IE, people editor control is working but in outlook account names are not resolved and dictionary also not working. There should be some work around as OOTB approval
task form could able to do it.
So, Question is, why people picker is not working in Outlook? and how to make it work? If I store user profile in InfoPath form, people editor in outlook is working. but how to make a dynamic soap connection ?
Thanks.Don't mark your own post as an answer when you obviously didn't understand the question...
Dharnima mentioned it is working in IE but not working in Outlook, so it's obviously not because the
"Requested By" field is in read only otherwise it wouldn't work in IE either.
Like Navid.R mentionned, the problem is indeed when going through the "Reassign Task" button, but coming from Outlook.
I have the same problem where the people picker validator and the people directory button doesn't work, only when coming from Outlook. I do click on Reassign Task, but I am unable to valide or open the people directory with both people picker buttons, simply
nothing happens.
I tried adding a native SharePoint Approval workflow to my list, and this one works fine. I can click the "Open Task" button in Outlook, click "Reassign Task" and then the people picker works perfectly fine.
However my custom workflow (that has default forms) does not work when prompted from Outlook.
I even tried to delete both forms and republish my workflow, so SharePoint can regenerate the forms by itself, it did generate new forms, but no luck either. -
Blur tool not working in elements 11
I tried resetting 11.0 in %appdata% to a new name and then restarted elements. This worked before (several times) but did not work this time. Any thoughts? It seems to be a very fickle tool.
Thanks,
MarkClick in the tools pallet and select your tool, then go to the Tool Options bar at the bottom of the workspace. Click on the dropdown list to the right and choose Reset Tool.
Maybe you are looking for
-
How do I remove all traces of 'album'? I do not want artwork, blank place holders, titles or artists sorted by album? I just want my music listed by title, artist or genre.
-
I have a 2008 Macbook. I want to install a newer (used) hard drive into this one. I think all I need is the special screwdriver to remove it, then install it. Where can I get that screw driver?
-
I want to make a chatroom using jsp, and have some problem, Help!
I want to build a chatroom using jsp and client using plain html, so i need every client could have a constant connection with the web server and will receive messages realtime. But i got 2 problems. First, how can i turn my buffers off so that messa
-
Functiontemplate from repository was null
I have a sceanrio file rfc file,All my design config seems to be good i have double checked the rfc adapter configuation.I have an error in moni Error <?xml version="1.0" encoding="UTF-8" standalone="yes" ?> - <!-- Call Adapter --> - <SAP:Error xm
-
CrystalDecisions Session Manager error
Hi, I am running a Windows 7 Enterprise 64 bit machine. I have VS2010 with .NET 4 installed on the machine. I am running ASP.NET 4.0 application which would connect to the Business Object server and generate a pdf report. I downloaded and installed t