Add Val.Fld/Key Fig. for use it in KEU2

Hi,
   Can i add a new Val.Fld/Key Fig., like a Netsales, for use it in a CO-PA cycle in a KEU2?
   Where can i define it?, because i need a formula, the total of two Val.Fld/Key Fig already defined.
Thanks in advance.

In method HMAC, you have towards the bottom
catch(Exception e) {}please change this to
catch(Exception e)
            e.printStackTrace();
        }Note that using the sun.* classes, including the sun.misc.BASE64Encoder class, requires elevated privileges (see http://forum.java.sun.com/thread.jspa?threadID=483223&messageID=2255882).
It is not difficult to write your own encoder/decoder class, or borrow one from someone else. Just google on "java base64 encoder".

Similar Messages

  • I currently have a D-Link DI-604 broadband router with windows computers.  How can I add wifi to the network for use with ipad?  Can I use AirPort Express?

    I currently have a D-Link DI-604 broadband router with windows computers.  How can I add wifi to the network for use with ipad?  Can I use AirPort Express?

    Yes. You can directly connect an 802.11n AirPort Express Base Station (AXn) using an Ethernet cable. The AXn would then just need to be configured as a bridge to allow the D-Link to continue to provide both NAT & DHCP services for all network clients connected to either router.
    In this configuration, the AXn would broadcast a wireless network for your wireless network clients to connect to.

  • Error 1603 - key invalid for use in specified stat...

    cannot use skype, cannot re-install Skype
    get: error 1603
    and window stating: key invalid for use in specified state
    Skype was working fine up to yesterday (Sept 15 2014)

    ruwim escribió:
    Try to uninstall Windows Security update KB2918614.
    http://community.skype.com/t5/Windows-desktop-client/Error-Key-not-valid-for-use-in-specified-state/​...
    I personally whould not recommend that, because uninstalling the update KB2918614 places the Windows Installer service back to its original design, but also leaves it vulnerable to the reported security issue https://technet.microsoft.com/library/security/MS1​4-049
    more info about this here: http://windowsitpro.com/security/bug-or-feature-kb​2918614-alters-windows-installer-behavior
    so, the right way to solve this this, is fixing user credentials and permissions, that could be corrupted by a virus.
    1 - Reset File Permissions: http://www.tweaking.com/content/page/reset_file_pe​rmissions.html
    2 - Reset Registry Permissions: http://www.tweaking.com/content/page/reset_registr​y_permissions.html
    3 - Repair MSI (Windows Installer): http://www.tweaking.com/content/page/repair_msi_wi​ndows_installer.html
    after that, you can try uninstall KB2918614 and then install KB2918614 again from Windows Update in Control Panel.

  • Manually add search engines to firefox for use with Omnibar?

    One extension I really enjoyed with Chrome was QuickMarks, which allowed you to type 'b ' in the omnibox to search and open bookmarks. I found you can use the '*' key in firefox but it doesn't work as efficiently as it doesn't bring it up for you, you have to tab through suggestions.
    I use omnibar and like the way you can use multiple search engines with keywords at the beginning. Like 'g <search>' to search google for <search>. Is there a way to add manual search engines to this list? And better yet, is there any way to add bookmarks as a search engine? That way I could set the keyword to b, type 'b mo' <ENTER> and it would open up a Mozilla bookmark.

    There probably is a way to open bookmarks in a tab, perhaps using the internal address of the Bookmarks Sidebar. But when I experiment with searches in the sidebar (Ctrl+b) or Library dialog (Ctrl+Shift+b) the order of the results is... I have no idea what order that is. So it doesn't strike me as more useful than the address bar in getting to the right result quickly.

  • How to add checkboxes in InDesign CS3 for use in pdf?

    I need to create a page with checkboxes for the user to select various options. I can create buttons and hyperlinks, but I am unable to create checkboxes. Is it even possible to do so in InDesign?

    Thanks Bob. Just wondering though, I need to generate an electronic form, meaning I need to be able to use these checkboxes for scripting. I don't think the auto form recognition feature works for that... does it?

  • Typewriter font required for use with Idraw

    Hi
    I need to lnondon if there is an app that will let me add a typewriter retro font for use in Idraw..?
    The ones avail in idraw are a bit limited.
    Thanks for your help!

    You cannot add any fonts to any apps at all. The fonts that are in the app are all that is available to you.
    If iDraw has an update that includes the font, that is the only way that you could get it. iDraw would have to include it in the app.

  • I can use my appleID without any problems for using to download new apps in the app-store or Itunes - Problem: I can´t use my ID at facetime and Imessage - I´d like to add an EMail account on top to my mobile number. My password will not be accepted!!!???

    I can use my appleID without any problems for using to download new apps in the app-store or Itunes - Problem: I can´t use my ID at facetime and Imessage -
    I´d like to add an EMail account on top to my mobile number to use more this services. My password will not be accepted!!!??? I try it and i try it and i try ist, throughout the same problem. Whats on? The user help desk said, i´ve to reset and use the WLAN key new as well as possible - no way!

    Contact the App store for Apple ID help. Their support link is on the right of the App store window
    LN

  • Windows 7 Professional 64bit OEM Retail Key has been blocked for used by microsoft

    I purchased Windows 7 Professional 64-bit OEM on 19th
    March 2014,  from a well known retailer, it is legit with the plastic case Hologram and the COA sticker. Before I instal on my laptop HP430, I ask to [email protected] about the Key is valid or not. On 20th March 2014 I got an email reply
    from [email protected] that my Key was Valid. After that I decide to instal on my HP430 Laptop and activated with no issues.  On 2nd May 2014 my laptop was error so I decide to re-instal my Windows on the same Lapotp HP430. Finally I try to re-activate
    my License using online activation and got an error message "This product key is blocked for used by Microsoft". I was trying to activate with Phone activation, but I got the same error "This product key is blocked for used by Microsoft".
    Can anyone provide details on this? Why is my key blocked from activation? What could of happened that compromised my license key?
    Thanks for your time reading this.
    Below is my Diagnostic Report :
    Diagnostic Report (1.9.0027.0):
    Windows Validation Data-->
    Validation Code: 0
    Cached Online Validation Code: 0x0
    Windows Product Key: *****-*****-HCDX4-Q8V8T-8YTGC
    Windows Product Key Hash: Cis9b0F7nPyYY28ASxP8BpOaCpM=
    Windows Product ID: 00371-702-6995841-06073
    Windows Product ID Type: 5
    Windows License Type: Retail
    Windows OS version: 6.1.7601.2.00010100.1.0.048
    ID: {3430F04C-466C-462E-B312-702BD690EF08}(1)
    Is Admin: Yes
    TestCab: 0x0
    LegitcheckControl ActiveX: N/A, hr = 0x80070002
    Signed By: N/A, hr = 0x80070002
    Product Name: Windows 7 Professional
    Architecture: 0x00000009
    Build lab: 7601.win7sp1_gdr.130828-1532
    TTS Error:
    Validation Diagnostic:
    Resolution Status: N/A
    Vista WgaER Data-->
    ThreatID(s): N/A, hr = 0x80070002
    Version: N/A, hr = 0x80070002
    Windows XP Notifications Data-->
    Cached Result: N/A, hr = 0x80070002
    File Exists: No
    Version: N/A, hr = 0x80070002
    WgaTray.exe Signed By: N/A, hr = 0x80070002
    WgaLogon.dll Signed By: N/A, hr = 0x80070002
    OGA Notifications Data-->
    Cached Result: N/A, hr = 0x80070002
    Version: N/A, hr = 0x80070002
    OGAExec.exe Signed By: N/A, hr = 0x80070002
    OGAAddin.dll Signed By: N/A, hr = 0x80070002
    OGA Data-->
    Office Status: 103 Blocked VLK
    Microsoft Office Enterprise 2007 - 103 Blocked VLK
    OGA Version: N/A, 0x80070002
    Signed By: N/A, hr = 0x80070002
    Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3
    Browser Data-->
    Proxy settings: N/A
    User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
    Default Browser: C:\Program Files (x86)\Mozilla Firefox\firefox.exe
    Download signed ActiveX controls: Prompt
    Download unsigned ActiveX controls: Disabled
    Run ActiveX controls and plug-ins: Allowed
    Initialize and script ActiveX controls not marked as safe: Disabled
    Allow scripting of Internet Explorer Webbrowser control: Disabled
    Active scripting: Allowed
    Script ActiveX controls marked as safe for scripting: Allowed
    File Scan Data-->
    Other data-->
    Office Details: <GenuineResults><MachineData><UGUID>{3430F04C-466C-462E-B312-702BD690EF08}</UGUID><Version>1.9.0027.0</Version><OS>6.1.7601.2.00010100.1.0.048</OS><Architecture>x64</Architecture><PKey>*****-*****-*****-*****-8YTGC</PKey><PID>00371-702-6995841-06073</PID><PIDType>5</PIDType><SID>S-1-5-21-185284974-1149994224-1979197176</SID><SYSTEM><Manufacturer>Hewlett-Packard</Manufacturer><Model>HP
    430 Notebook PC              </Model></SYSTEM><BIOS><Manufacturer>Hewlett-Packard</Manufacturer><Version>F.39</Version><SMBIOSVersion major="2"
    minor="7"/><Date>20111218000000.000000+000</Date></BIOS><HWID>53803307018400FE</HWID><UserLCID>0409</UserLCID><SystemLCID>0409</SystemLCID><TimeZone>SE Asia Standard Time(GMT+07:00)</TimeZone><iJoin>0</iJoin><SBID><stat>3</stat><msppid></msppid><name></name><model></model></SBID><OEM><OEMID>HPQOEM</OEMID><OEMTableID>SLIC-MPC</OEMTableID></OEM><GANotification/></MachineData><Software><Office><Result>103</Result><Products><Product
    GUID="{90120000-0030-0000-0000-0000000FF1CE}"><LegitResult>103</LegitResult><Name>Microsoft Office Enterprise 2007</Name><Ver>12</Ver><Val>ACD7202654E586</Val><Hash>fFic3JgCreGGRxyF8uMWB4R4Jcg=</Hash><Pid>89388-707-1528066-65065</Pid><PidType>14</PidType></Product></Products><Applications><App
    Id="15" Version="12" Result="103"/><App Id="16" Version="12" Result="103"/><App Id="18" Version="12" Result="103"/><App Id="19" Version="12"
    Result="103"/><App Id="1A" Version="12" Result="103"/><App Id="1B" Version="12" Result="103"/><App Id="44" Version="12" Result="103"/><App
    Id="A1" Version="12" Result="103"/><App Id="BA" Version="12" Result="103"/></Applications></Office></Software></GenuineResults>  
    Spsys.log Content: 0x80070002
    Licensing Data-->
    Software licensing service version: 6.1.7601.17514
    Name: Windows(R) 7, Professional edition
    Description: Windows Operating System - Windows(R) 7, RETAIL channel
    Activation ID: c1e88de3-96c4-4563-ad7d-775f65b1e670
    Application ID: 55c92734-d682-4d71-983e-d6ec3f16059f
    Extended PID: 00371-00212-702-699584-00-1033-7601.0000-1222014
    Installation ID: 003864977163724541444611907516049313404610751646466300
    Processor Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
    Machine Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
    Use License URL: http://go.microsoft.com/fwlink/?LinkID=88341
    Product Key Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
    Partial Product Key: 8YTGC
    License Status: Initial grace period
    Time remaining: 40020 minute(s) (27 day(s))
    Remaining Windows rearm count: 3
    Trusted time: 5/5/2014 3:46:04 PM
    Windows Activation Technologies-->
    HrOffline: 0x00000000
    HrOnline: 0x00000000
    HealthStatus: 0x0000000000000000
    Event Time Stamp: 5:3:2014 02:01
    ActiveX: Registered, Version: 7.1.7600.16395
    Admin Service: Registered, Version: 7.1.7600.16395
    HealthStatus Bitmask Output:
    HWID Data-->
    HWID Hash Current: MAAAAAIAAQABAAEAAAABAAAAAwABAAEAonYuGt6VdxYsZvAIoLNek8JprtZekS5z
    OEM Activation 1.0 Data-->
    N/A
    OEM Activation 2.0 Data-->
    BIOS valid for OA 2.0: yes, but no Windows marker
    Windows marker version: N/A
    OEMID and OEMTableID Consistent: yes
    BIOS Information:
      ACPI Table Name    OEMID Value    OEMTableID Value
      APIC            HPQOEM        SLIC-MPC
      FACP            HPQOEM        SLIC-MPC
      HPET            HPQOEM        SLIC-MPC
      BOOT            HPQOEM        SLIC-MPC
      MCFG            HPQOEM        SLIC-MPC
      ASF!            HPQOEM        SLIC-MPC
      SLIC            HPQOEM        SLIC-MPC
      SSDT            HPQOEM        SLIC-MPC
      ASPT            HPQOEM        SLIC-MPC
      SSDT            HPQOEM        SLIC-MPC
      SSDT            HPQOEM        SLIC-MPC
      SSDT            HPQOEM        SLIC-MPC
      SSDT            HPQOEM        SLIC-MPC

    The lack of a Windows marker in the SLIC table could indicate that the machine originally shipped without Windows installed - certainly, in India, this ships often with only some form of DOS present.
    I'll go into more detail in the new thread.
    Noel Paton | Nil Carborundum Illegitemi
    CrashFixPC |
    The Three-toed Sloth
    No - I do not work for Microsoft, or any of its contractors.

  • Add new key figs or characteristics and "Repair full request"

    Hi Gurus, here are my questions
    1.If I add new key figs or characteristics(which are not Key fields) to ODS and Cube containing tons of data, Will the transport for structure changes fail due to presence of data?
    2.The extractor to the ODS which inturn is feeding the cube, is delta enabled. So the newly added objects wont have entries for historical records. If I change this extractor to "Repair full request" after adding the new fields, will the new fields then get populated?
    3. After the "Repair Full Request" activity, Can I change the Infopackage setting back to delta update mode?
    Thanks for the help in advance!!
    Simmi

    Hello Simmi,
    1. Transport should go fine. As you are not changing the key fields, it should not cause any problem even if data is present.
    2. Yes. But make sure what data you want to laod. As with full repair, system is not going to check for duplicate data. The responsibility lies with you.
    3. Sure. if you mark the full load as repair, the delta settings will be unaffected.
    Hope it helps.
    Regards,
    Praveen

  • Failed to decrypt protected XML node "DTS:Password" with error 0x8009000B "Key not valid for use in specified state

    we have developed packages to do the followings
    Extract data from DB2 Source and put it in MS Sql Server 2008 database (Lets Say DatabaseA).From MS Sql Server 2008 (DatabaseA)
    we will process the data and place it in another database MS Sql Server 2008 (DatabaseB)
    We have created packages in BIDS..We created datasource connection in Datasource folder in BIDS..Which has DB2 Connection and both Ms Sql Server connection (Windows authentication-Let
    say its pointing to the server -ServerA which has DatabaseA and DatabaseB).The datasource connections will be used in packages during development.
    For deployment we have created Package Configuration which will have both DB2 Connection and MS SqlServer connection in the config
    We deployed the packages in different MS SqlServer by changing the connectionstring in the config for DB2 and MS SqlServer...
    While runing the package we are getting the following error message
    Code: 0xC0016016     Source:       Description: Failed to decrypt protected XML node "DTS:Password" with error 0x8009000B "Key not valid for
    use in specified state.". You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that the correct key is available.
    ilikemicrosoft

    Hi Surendiran,
    This is because the package has been created by somebody else and the package is being deployed under sombody else's account. e.g. If you are the creator then the package is encryption set according to your account and the package setup in SQL server is
    under a different user account.
    This happens because the package protection level is set to EncryptSensitiveWithUserKey which encrypts
    sensitive information using creator's account name.
    As a solution:
    Either you have to set up the package in SQL server under your account (which some infrastructures do not allow).
    OR
    Set the package property Protection Level to "DontSaveSensitive" and add a configuration file
    to the package and set the initial values for all the variables and all the connection manager in that configuration file (which might be tedious of-course).
    OR
    The third options (which I like do) is to open the package file and delete the password encryption entries from the package. Do note that this is not supported by designer and every time you make changes to the connection managers these encryption entries come
    back.
    Hope this helps. 
    Please mark the post as answered if it answers your question

  • SQL Server Mgt Studio 2008 installation problem - Key not valid for use in specified state

    I'm setting up SQL Server Management Studio 2008 on my laptop.  It installed fine, but failed to import a regsrver file exported from another machine. This appears to have been due to the fact that I exported the file with usernames and passwords, although I must admit that's pretty darned inconvenient if it can't be done. 
    Nevertheless, I exported the file again without usernames and passwords, but the new install now won't let me even see servers, let alone import any new ones.
    When I start Studio, it gives me the "Key not valid for use in specified state" error.  When I 'continue', I'm delivered to a screen with the 'registered servers' pane crippled.  It has no contents at all and no ability to add, select, import, export.  Nothing there.
    How do I rectify this?
    The installation is on Windows 7 Home Premium.
    Thanks for any suggestions.

    Hi Don,
    Since this issue was still not resolved even after you reinstall SQL Server 2008, I think that this issue is probably related to some corrupted files or registry keys. Please refer to the following steps to see if you can resolve this issue:
    1. Close your SSMS;
    2. Go to the folder %appdata%\Microsoft\Microsoft SQL Server\100\Tools\ and check if there is a Shell folder, if so, rename it to Shell-Copy;
    3. Re-open your SSMS to see if the error persists.
    Everytime SQL Server 2008 Management Studio starts, it will read information from this folder to retrieve and recover some data. If the information does not exists, it will recreate new ones. Please check if this helps.
    Best regards,
    Charles Wang
    Please remember to mark the replies as answers if they help and unmark them if they provide no help
    To add to Don's comment, if you are using a different account (for example, an SA account) to run SQL Server management studio then make sure to change the user profile name when you browse to "%appdata%\Microsoft\Microsoft SQL Server\100\Tools\".
    I know many of us developers have multiple accounts and I usually have my SA account have logon privileges on databases not my regular AD Account.
    Other than that, the reason why this fails is because MS encrypted the regsrvr file on the source computer using the source computer's ID and is therefore unable to decrypt the file on the destination computer. To me that just doesn't make sense since the
    whole idea of Export and import was to move this information across computers! And that's why this works when you import without username and passwords - no more encryption/decryption. Since we use integrated windows logon (trusted_connection=true) it works
    great. For the few servers that we had SQL Logons I had to manually type them in and save. But all in all, pretty painless.

  • Site behind load balancer - Key not valid for use in specified state

    Hi,
    I have created a sharepoint application page to access an active end point on ADFS and establish a fedauth session. All works well in single server. But when the page runs behind load balancer with 2 servers, it fails with key not valid for use in specified
    state exception. Stickiness is enabled on load balancer. verified that.
    I had made few changes to config file in microsoft.identitymodel section to accomodate adfs custom login. This included removing securitytokenhandlers and issuertokenresolvers as well. Is this impacting the encryption/decryption in anyway?
    Any pointers would help.
    Reference point for my application page : http://blog.helloitsliam.com/Lists/Posts/Post.aspx?ID=76

    Hi,
    As I understand, you encountered the error “Key not valid for use in specified state” when ADFS custom login.
    In order to run in Windows Azure Web Sites a Web application which uses WIF for handling authentication, you must change the default cookie protection method (DPAPI, not available on Windows Azure Web Sites) to something that will work in a farmed environment
    and with the IIS’ user profile load turned off.
    1. If you are using the Identity and Access Tools for VS2012, just go to the Configuration tab and check the box “Enable Web farm ready cookies”.
    2. If you want to do things by hand, add the following code snippet in your system.identitymodel/identityConfiguration element:
       <securityTokenHandlers>
         <add type="System.IdentityModel.Services.Tokens.MachineKeySessionSecurityTokenHandler, 
                 System.IdentityModel.Services, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
          <remove type="System.IdentityModel.Tokens.SessionSecurityTokenHandler,
                System.IdentityModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
        </securityTokenHandlers>
    There is a similar case:
    http://stackoverflow.com/questions/19323287/key-not-valid-for-use-in-specified-state-error-for-net-4-5-mvc-4-application
    Best regards,
    Sara Fan
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • FRM-40735 Error when trying to add an employee as key member for a project

    FRM-40735: ON Insert trigger raised unhandled exception ORA-06502 in PAXPREPR when trying to add an employee as key member for a project
    Tried generating FND log messages to see if it shows any error messages but it didn't show any specific error.

    Error ORA-06502 says PL/SQL: numeric or value error.
    The Error could be in the data already exist in the system for key members. If this Project was created using APIs, there are possibilities that some other character( i.e. next line chracter ) got entered in the column value which Form "PAXPREPR" is not able to fetch or update.
    You can query the key member data from back-end to check if any data corruption is there. you may require data-fix to correct that.
    AB

  • SSL: How to use the same key pair for ABAP & JAVA?

    Hello,
    I want to setup an XI (3.0 on Netweaver04)installation in the way, that ABAP AS and JAVA AS use the same key pair for SSL. My problem is to define the same private key on ABAP and JAVA. With the JAVA Administrator I am able to define or import a private key. But I could not find a possibility in ABAP to manage private keys in order to use the same on as in JAVA. What is the procedure for this?
    Thanks and Regards,
    Frank Tottleben

    Hello,
    I want to setup an XI (3.0 on Netweaver04)installation in the way, that ABAP AS and JAVA AS use the same key pair for SSL. My problem is to define the same private key on ABAP and JAVA. With the JAVA Administrator I am able to define or import a private key. But I could not find a possibility in ABAP to manage private keys in order to use the same on as in JAVA. What is the procedure for this?
    Thanks and Regards,
    Frank Tottleben

  • When I try to get the key code for office it tells me its already been used.  My mac had a new hard drive in its first year, could it be because of this?  How can I get the office I've paid for but never used?

    My mac had to have a new hard drive in its first year.  Now, when I try to get the key code for office it tells me its already been used.  How do i get the office I've paid for but never used?

    The product key is sent to you by email as part of the purchase confirmation.
    If you have lost it, log into your Microsoft account.

Maybe you are looking for

  • Is there a way to add a transition to every slide at once in Keynote for Ipad2

    Is there a way to add a transition to every slide in Keynote on my IPAD 2?  I've been doing each slide individually and it is taking too long! thanks,

  • Custom reports in Oracle Designer - HELP!

    I have a need to write some custom reports in Oracle Designer. I know all the information is in the repository but don't know how to get it out. Would anyone happen to know where I can get my hands on an ER diagram depicting the relationships across

  • Runtime error on Satellite L650

    I have just bought a L650-1GC. I have a software problem. It will not run adobe reader. It opens but then comes up with a runtime error and closes. This means I cannot access the user manual. It will also not run the installed starter edition of micr

  • How to reset Failed Passcode after IOS 7 Installation

    Installed IOS 7, then 4 digit number for Passcode, but not recognised this morning and after 6 attempts locked out.  Have restored Passcode screen, but can't solve 4 digit number refusal.  How do you get into the Ipad to reset the Passcode?

  • Addresses Have Disappeared

    I just sat down to my computer to do some email and when I brought up my address book every address vcard/file/data was completely gone. I have done nothing unusual or delibirate that would cause this. I cannot even find them on my idisk backup. Any