Add working days to a date excluding weekends and holidays

Hi there,
I need to write a function that will take a specified date and number of days to add as input parameters, and return the working day based on the number of days to add parameter, excluding weekends and any holidays held in a holiday table.
Here is my function so far -
CREATE OR REPLACE FUNCTION f_add_work_days(pd_date IN DATE
,pn_add_days IN PLS_INTEGER) RETURN DATE IS
pd_in_date DATE := pd_date;
ld_next_holiday DATE;
ln_days_left PLS_INTEGER := pn_add_days;
CURSOR cu_holiday(pn_date IN ge740.holdte%TYPE) IS
SELECT pck_utility.f_dtcnv(g.holdte)
FROM ge740 g
WHERE g.holdte >= pn_date
AND g.maint <> 'D'
ORDER BY g.holdte ASC;
BEGIN
OPEN cu_holiday(pck_utility.f_dtcnv(pd_in_date));
FETCH cu_holiday
INTO ld_next_holiday;
CLOSE cu_holiday;
LOOP
IF ln_days_left = 0 THEN
EXIT;
END IF;
pd_in_date := pd_in_date + 1;
IF pd_in_date > ld_next_holiday THEN
OPEN cu_holiday(pck_utility.f_dtcnv(pd_in_date));
FETCH cu_holiday
INTO ld_next_holiday;
CLOSE cu_holiday;
END IF;
CASE
WHEN TO_CHAR(pd_in_date
,'fmDAY') = 'SATURDAY' THEN
pd_in_date := pd_in_date + 2;
ln_days_left := ln_days_left - 1;
WHEN TO_CHAR(pd_in_date
,'fmDAY') = 'SUNDAY' THEN
pd_in_date := pd_in_date + 1;
ln_days_left := ln_days_left - 1;
WHEN pd_in_date = ld_next_holiday THEN
pd_in_date := pd_in_date + 1;
ln_days_left := ln_days_left - 1;
ELSE
ln_days_left := ln_days_left - 1;
END CASE;
END LOOP;
RETURN(pd_in_date);
END f_add_work_days;
I think there is something wrong/missing in the logic as I can't get it to cater for say a double bank holiday(25/26th Dec - if the input parameters are 24/12/2007 and 2, which should return the 28th but returns the 26th!!).
I'm relatively new to PL/SQL and Oracle, so any help, advice, ideas would be greatly appreciated!
thanks in advance

smth like
SQL> with holidays as (select to_date('10.06.2007','dd.mm.yyyy') h_dt from dual),
  2       par as (select to_date('08.06.2007','dd.mm.yyyy') dt, 2 add_days from dual)
  3  --
  4  select min(dt) needed_date
  5    from (select p.*,
  6                 h.*,
  7                 mod(to_char(dt, 'j'), 7),
  8                 sum(decode(mod(to_char(dt, 'j'), 7), 5, 0, 6, 0, 1)+--get rid of sat and sun
  9                     nvl2(h_dt, -1, 0)--check if the day is holiday
10                     ) over(order by dt) s
11            from (select dt + level dt, add_days
12                    from par
13                  connect by level <= 100) p,
14                 holidays h
15           where h_dt(+) = dt
16           order by 1)
17   where add_days = s
18  /
NEEDED_DATE
13.06.2007
SQL> ?
Message was edited by:
Volder
PS What Oracle version are you on?

Similar Messages

  • Time between dates excluding Weekends and Holidays

    I am fairly new to Power Pivot and I am having trouble with this formula.  I need my Cycle Time Days column to capture the days between CreatedDataTime and ClosedDateTime excluding Weekends and Holidays.  I have a tab that has the holidays but
    I can't get the formula correctly?   Jill
    CreatdDateTime        ClosedDateTime     Cycle Time Days
    12/1/2014                    12/10/2014

    first of all you need a separate time table which holds all possible dates for your model
    there should be no gaps, it should contain full years and a column of datatype DateTime as unique key
    once you have this in place add a calculated column to this table as 
    =IF(INT(FORMAT([Date], "w")) >= 6, "Weekend", "Workday")
    then go back to your original table and add the following calculation for your [Cycle Time Days]-column:
    =COUNTROWS(
    FILTER(
        'Dates',
        Dates[Date] >= DateRanges[DateFrom]
        && Dates[Date] <= DateRanges[DateTo]
        && 'Dates'[IsWeekend] = "Workday"
    Holidays are a bit more tricky but you can follow the same pattern but you need to get the holidays from somewhere
    hth,
    -gerhard
    Gerhard Brueckl
    blogging @ http://blog.gbrueckl.at
    working @ http://www.pmOne.com

  • Calculate the Difference Between two dates excluding weekends and Holidays

    Hi,
    We need to calculate the difference between the two dates by excluding the Local public holidays (It is global and varies across countries) and weekends should not be included in calculation for a business day in OBIEE.
    We have two dates: Open date and close date when ever close date is null we are calculating age based on taking the current timestamp and need to exclude the weekends and Holidays when ever the close date is null.
    Ex:
    Col1 col2 Total
    11/9/2010 2:46:38 PM Null 13
    11/2/2010 8:06:26 PM 11/3/2010 5:37:03 PM 1
    (In the Total we shouldn't include the weekends,holidays)
    Please let me know how to calculate the difference between two dates by excluding the weekends and holidays.
    Thanks
    Edited by: user10441472 on Nov 22, 2010 3:14 PM

    You already asked this question and I answered it...
    Re: calculation of Business day in OBIEE

  • Working day formula that excludes weekends and holidays in WEBI

    Hi Guys,
    Can we calculate a working day formula that excludes weekends and holidays in WEBI OR in Universe?
    The universe I am working on is using stored procedures, so there are no joins or modelling done. Although there is a workday stored proc  that I can bring in the universe.
    I am just thinking if there is no modelling or joins done in the universe how will this help me in webi?
    Your suggestions will be very helpful.
    Thanks,
    Jitan

    One more suggestion I need from you  -
    I have a Work_Calendar_VW that has the following columns -
    Calendar_Date - 5/1/2014
    Calendar_Year - 2014
    Calendar_Month - 5
    Calendar_Day - 1
    Work_Day - 1
    Day_Type - WD (Work Day)  For Weekends this will be displayed as WE
    The columns have all dates for current year in SQL Server.
    I am going to pull this into the universe and create 2 derived tables to calculate MTD Day counts.
    Derived Table 1  - Calculate Yest Work Day... this will remove all the weekends and holidays and give me the last working day. This includes couple of case statments to check each day if it's a working day or weekend.
    For Work Day the above code will be 1 and for weekend 0
    Derived Table 2  - This will give me the count of working days in current month using the above view and Derived table 1 Below is the code  -
    SELECT COUNT(*)
    FROM Work_Calendar_VW
    WHERE [Work_Day] = 1 AND
       (Calendar_Date BETWEEN CAST(CONVERT(VARCHAR(25),MONTH(LastWoringkday()),101) + '/01/'
       + CONVERT(VARCHAR(25),YEAR(LastWoringkday()),101) AS DATE)
      AND LastWoringkday()).
    I cannot do joins because this universe has been built using stored proc and would like to implement this in BO universe.
    let me know if this is the right approach.
    Thanks,
    Jitan

  • How to count days between two dates excluding saterady and sunday

    Hi all
    iam working on oracle sql/plsql.
    In my application , i need to caliculate leave days between two dates excluding saterady and sunday
    Please tell me the solution if any one knows
    thanks in advance ,
    balu

    More modern version:
    WITH date_tab AS
    (SELECT TO_DATE ('&from_date', 'dd-MON-yyyy')
    + LEVEL
    - 1 business_date
    FROM DUAL
    CONNECT BY LEVEL <=
    TO_DATE ('&to_date', 'dd-MON-yyyy')
    - TO_DATE ('&from_date', 'dd-MON-yyyy')
    + 1)
    SELECT business_date
    FROM date_tab
    WHERE TO_CHAR (business_date, 'DY') NOT IN ('SAT', 'SUN');Thank you,
    Tony Miller
    Webster, TX
    Never Surrender Dreams!
    JMS
    If this question is answered, please mark the thread as closed and assign points where earned..

  • DATEADD excluding weekends and holidays

    select getdate(),dateadd(day,15,Getdate())
    THis gets me today and 15 days from now. However I need 15 business days. I need to exclude weekends and holidays in here so that is looks like this. 
    where fulldate between getdate() and dateadd(day,15,Getdate())
    I have a dim table for dates and have an isholiday = 0 or 1. I just can't figure out how to include this in the DATEADD expression.

    Hi,
    try this link
    http://www.sqlservercentral.com/Forums/Topic1247790-391-1.aspx
    Hope will help you,
    Questo post è fornito &quot;così com'è&quot;. Non conferisce garanzie o diritti di alcun tipo. Ricorda di usare la funzione &quot;segna come risposta&quot; per i post che ti hanno aiutato a risolvere il problema e &quot;deseleziona
    come risposta&quot; quando le risposte segnate non sono effettivamente utili. Questo è particolarmente utile per altri utenti che leggono il thread, alla ricerca di soluzioni a problemi similari. ENG: This posting is provided &quot;AS IS&quot;
    with no warranties, and confers no rights. Please remember to click &quot;Mark as Answer&quot; on the post that helps you, and to click &quot;Unmark as Answer&quot; if a marked post does not actually answer your question. Please Vote This As
    Helpful if it helps to solve your issue. This can be beneficial to other community members reading the thread.

  • Delivery Date should propose only working days (Excluding weekends and holidays

    Hello All
    I have one requirement here, where delivery dates should propose only working days and it should not allow to add weekends and holidays during the creation of sales order.
    I would like to know if there are any standard settings to be done in plant or shiping point?
    Kindly need all your input on this
    Thanks
    Naveen

    Hello All
    Same calendar has already been assigned in shipping point,plant and sales org and also in the calendar holidays been maintained, even though when we create a sales order it will accept weekends and holidays
    Thanks

  • Payment term with fixed day but exclude weekends and holidays

    Hello,
    our customer has a requirement to have payment term that is like this:
    Due date: fixed day 15th next month.
    If due date falls in weekend or holiday due date will move to next business (working) day.
    We have working payment term which is always the 15th on next month but it falls to weekends.
    I was searching SDN found something but not working.
    Could you please send me a step-by-step configuration how to exclude the weekends and holidays?
    Thank you a lot.
    Best regards,
    Lubos

    Dear Lubos,
    unfortunately waht You need to have It is impossible into the SAP Standard System.
    Please be aware that the vendor invoice has two relevant dates:
    Baseline date   > INVFO-ZFBDT
    Due on   > INVFO-NETDF
    The Baseline date is managed by the "Term of payment",  transaction obb8, frame
    "Baseline date calculation" where You can put for example :
    Fixed day            30
    Additional months     3
    This means that if You put as Document date 01.01.2009, the baseline date
    will be 30.04.2009 (fixed day 30, additional months 3).
    The "Due on" date will start ALWAYS from "the Baseline date"
    (that in my example is 30.04.2009) and according to the below
    "Term of payment" , the System will add
    31 days, so the Due on date will be 31.05.2009.
    Term      Percentage   No. of days  /  Fixed date  Additional months
    1.               %      31
    2.               %
    3.
    You could think to use the FI substitution to reach Your goal.
    Mauri

  • How to get difference in days between 2 dates excluding weekends

    Hi all,
    i have a requirement, to calculate the difference between 2 dates, in days.
    eg: 01/08/2007 and 05/08/2007.
         Difference = 4 days.
    But here my actual requirement is i have to calculate this difference excluding weekends (saturday n sundays).
    eg: 01/08/2007 -
    Thursday
         05/08/2007 -
    Monday
    so now Difference = 2 days.
    Please help me regarding this.
    Points will be rewarded for helpfull answers.
    Thanks in Advance.
    Regards,
    Vineel

    see these codes of rich
    report zrich_0003.
    data: begin of itab occurs 0,
          datum type sy-datum,
          end of itab.
    data: weekday like dtresr-weekday.
    data: number_lines type i.
    parameters: p_sdatum type sy-datum,
                p_edatum type sy-datum.
    itab-datum = p_sdatum.
    append itab.
    do.
      if itab-datum = p_edatum.
        exit.
      endif.
      itab-datum = itab-datum + 1.
      call function 'DATE_TO_DAY'
           exporting
                date    = itab-datum
           importing
                weekday = weekday.
      if weekday = 'Sat.'
        or weekday = 'Sunday'.
        continue.
      endif.
      append itab.
    enddo.
    describe table itab lines number_lines.
    write:/ 'Number of days between dates is', number_lines.
    and
    report zrich_0001.
    parameters: p_start type sy-datum,
                p_end   type sy-datum.
    data: idays type table of   rke_dat with header line.
    data: workingdays type i.
    call function 'RKE_SELECT_FACTDAYS_FOR_PERIOD'
         exporting
              i_datab               = p_start
              i_datbi               = p_end
              i_factid              = 'P8'  " Fact Calender ID
         tables
              eth_dats              = idays
         exceptions
              date_conversion_error = 1
              others                = 2.
    describe table idays lines workingdays.
    write:/ workingdays.
    I want to find the No.of working days between the two dates
    regards,
    srinivas

  • Day between two dates excluding Saturday and Sunday

    Hi,
    I have the Requirement like : there are two inputs in query 1)startdate and 2)end date when end user enter the start date and end date the sql query has to retrive the number of days between given start and end dates, and it should be retrivied with two condition 1)all sundays between the above dates excluded 2)second and fourth Saturday of the month in between the start and end dates has to be excluded .
    example start date:01-may-09
    end date: 16-may-09
    expected output:13

    Balaji.M wrote:
    Hope this will be helpful for you.
    SELECT dates,
    TO_CHAR(dates, 'D'),
    TO_CHAR(dates, 'DAY'),
    TO_CHAR(inner.dates, 'W')
    FROM (SELECT TO_DATE('01-may-09') + LEVEL - 1 dates
    FROM DUAL
    CONNECT BY LEVEL <= (TO_DATE('16-may-09') - TO_DATE('01-may-09')) + 1) inner
    WHERE ( ( TO_CHAR(inner.dates, 'D') = 7
    AND TO_CHAR(inner.dates, 'W') NOT IN(2, 4)
    OR TO_CHAR(inner.dates, 'D') not in (1,7)
    You can replace the start date (two place) and end date (one place) by variables and check.Of course we have to be aware of local NLS settings:
    SQL> SELECT dates,
      2  TO_CHAR(dates, 'D'),
      3  TO_CHAR(dates, 'DAY'),
      4  TO_CHAR(inner.dates, 'W')
      5  FROM (SELECT TO_DATE('01-may-09') + LEVEL - 1 dates
      6  FROM DUAL
      7  CONNECT BY LEVEL <= (TO_DATE('16-may-09') - TO_DATE('01-may-09')) + 1) inner
      8  WHERE ( ( TO_CHAR(inner.dates, 'D') = 7
      9  AND TO_CHAR(inner.dates, 'W') NOT IN(2, 4)
    10  )
    11  OR TO_CHAR(inner.dates, 'D') not in (1,7)
    12  );
    DATES     T TO_CHAR(D T
    01-MAY-09 5 FRIDAY    1
    02-MAY-09 6 SATURDAY  1
    03-MAY-09 7 SUNDAY    1
    05-MAY-09 2 TUESDAY   1
    06-MAY-09 3 WEDNESDAY 1
    07-MAY-09 4 THURSDAY  1
    08-MAY-09 5 FRIDAY    2
    09-MAY-09 6 SATURDAY  2
    12-MAY-09 2 TUESDAY   2
    13-MAY-09 3 WEDNESDAY 2
    14-MAY-09 4 THURSDAY  2
    15-MAY-09 5 FRIDAY    3
    16-MAY-09 6 SATURDAY  3
    13 rows selected.
    SQL>Day 1 on my local database is Monday, not Sunday.

  • Exclude Weekends and Holidays while applying for leave...

    Hi,
    Could anyone help me out in excluding holidays while applying for leave via absence management (employee self service) in R12? While clicking on calculate duration it includes weekends as well by default. Since updating the formula BG_ABSENCE_DURATION will involve creating UDTs, modify UDF and additional effort; I tried creating workschedulle and updated the profile HR: Schedule Based Absence Calculation to 'Yes' following the metalink note 'Schedule Based Absence Calculation in Self Service' [ID 437083.1] but no luck. Is there any other additional setup that needs to be done or its better to update Fast Formula. Kindly advise on the same. Thanks in Advance!!!
    Thanks,
    Ahmed

    Thanks much Gaurav. I was able to work it out by creating work schedule itself. I reckon I missed out selecting the schedule pattern. We need to ensure that after creating schedule the pattern needs to be selected and launched. After a while it gets effected in the system. Just in case if others are trying to implement work schedule for working days between Saturday to Wednesday following are the step involved. I have created two schedule pattern with day start as 1 and day stop as 4; and another pattern with day start as 7 and day stop as 7. It works like charm....:)
    Regards,
    Ahmed

  • Date difference function that returns minutes between two dates and excludes weekends and holidays

    Is there a way to get this to work as a function? 
    Currently returns error "Select statements included within a function cannot return data to a client"
    CREATE FUNCTION [dbo].[WorkDays](@DateFrom datetime,@DateTo datetime)
    RETURNS int
    AS
    BEGIN
    --Working time
    DECLARE @WTFrom TIME = '8:00AM';
    DECLARE @WTTo TIME = '5:00PM';
    DECLARE @minCount BIGINT
    --Date ranges
    IF (DATEDIFF(HOUR, @DateFrom, @DateTo) > 12)
    BEGIN
    WITH CTE AS
    SELECT @DateFrom AS DateVal
    UNION ALL
    SELECT DATEADD(HOUR, 1, DateVal)
    FROM CTE
    WHERE DateVal < DATEADD(HOUR, -1,@DateTo)
    SELECT DATEDIFF(minute, MIN(CTE.DateVal), MAX(CTE.DateVal))
    FROM CTE
    WHERE (CAST(CTE.DateVal AS time) > @WTFrom AND CAST(CTE.DateVal AS time) < @WTTo) AND DATEPART(dw, CTE.DateVal) NOT IN (1, 7) AND NOT EXISTS (SELECT * FROM Holiday AS H WHERE H.holiday = CTE.DateVal)
    OPTION (MAXRECURSION 0);
    END;
    ELSE
    BEGIN
    WITH CTE AS
    SELECT @DateFrom AS DateVal
    UNION ALL
    SELECT DATEADD(MINUTE, 1, DateVal)
    FROM CTE
    WHERE DateVal < DATEADD(MINUTE, -1,@DateTo)
    SELECT DATEDIFF(minute, MIN(CTE.DateVal), MAX(CTE.DateVal))
    FROM CTE
    WHERE (CAST(CTE.DateVal AS time) > @WTFrom AND CAST(CTE.DateVal AS time) < @WTTo) AND DATEPART(dw, CTE.DateVal) NOT IN (1, 7) AND NOT EXISTS (SELECT * FROM Holiday AS H WHERE H.holiday = CTE.DateVal)
    OPTION (MAXRECURSION 0);
    END;
    END
    Thanks for your help.

    Please post DDL, so that people do not have to guess what the keys, constraints, Declarative Referential Integrity, data types, etc. in your schema are. Learn how to follow ISO-11179 data element naming conventions and formatting rules (you do not). Temporal
    data should use ISO-8601 formats (you do not!). Code should be in Standard SQL as much as possible and not local dialect. 
    This is minimal polite behavior on SQL forums. 
    We hate functions in SQL. This is a declarative language and you are using it like 1950's FORTRAN. We hate local variables (more FORTRAN!)
     The name of a function has to be either a known, common name, like “sine”, “cosine” etc. Or it is “<verb>_<object>”; you think a noun is a verb! Do you really need BIGINT? Why did you invite garbage data with it? Why do you think that SQL
    uses AM/PM? Have you never seen the TIME data type? 
    Think about “date_val” as a data element name. A date is a unit of temporal measurement on a calendar scale. This would be a “<something>_date” in a valid schema. 
    >> Is there a way to get this to work as a function? <<
    Probably, but why do it wrong?
    Build a calendar table with one column for the calendar data and other columns to show whatever your business needs in the way of temporal information. Do not try to calculate holidays in SQL -- Easter alone requires too much math.
    The julian_business_nbr is how SQL people do this. Here is the skeleton. 
    CREATE TABLE Calendar
    (cal_date DATE NOT NULL PRIMARY KEY, 
     julian_business_nbr INTEGER NOT NULL, 
    Here is how it works:
    INSERT INTO Calendar 
    VALUES ('2007-04-05', 42), 
     ('2007-04-06', 43), -- Good Friday 
     ('2007-04-07', 43), 
     ('2007-04-08', 43), -- Easter Sunday 
     ('2007-04-09', 44), 
     ('2007-04-10', 45); --Tuesday
    To compute the business days from Thursday of this sample week to next Tuesday:
    SELECT (C2.julian_business_nbr - C1.julian_business_nbr)
      FROM Calendar AS C1, Calendar AS C2
     WHERE C1.cal_date = '2007-04-05',
       AND C2.cal_date = '2007-04-10'; 
    See how simple it can be when you stop trying to write FORTRAN and think in sets? 
    --CELKO-- Books in Celko Series for Morgan-Kaufmann Publishing: Analytics and OLAP in SQL / Data and Databases: Concepts in Practice Data / Measurements and Standards in SQL SQL for Smarties / SQL Programming Style / SQL Puzzles and Answers / Thinking
    in Sets / Trees and Hierarchies in SQL

  • Function module in SRM for adding number to date excluding weekends

    Hi Experts,
    Please help to get the standard FM in SRM for adding number to date and getting next date excluding weekends.
    Thanks in Advance.
    Thanks,
    Sahil

    This kind of custom FM can be created easily.
    But if you want to use standard FM then "DATE_CONVERT_TO_FACTORYDATE" FM is good but you need a factory calendar id which has all working days and weekend days specified (also public holidays if required). Then call this FM in loop for a count of days and it will give working day after "entered date + number of days"
    So if calendar has only weekdays and weekends specified, it will add number of days in specified date excluding weekends.
    Thanks,
    Murtuza

  • Add Working Days Function

    All,
    I have created the following function to add working days to a date...
    create or replace function add_working_days(
    p_days in number,
    p_dt in date default trunc(sysdate)
    return date
    as
    v_weeks number;
    v_adj number;
    begin
    v_weeks := trunc(p_days/5);
    if to_number(to_char(p_dt,'D')) + mod(p_days,5) >= 7 then
    v_adj := 2;
    else
    v_adj := 0;
    end if;
    return p_dt + 7*v_weeks + v_adj+mod(p_days,5);
    end add_working_days;
    I am then calling the function to default a date field.
    The hassle is that it keeps setting the year to 0006 instead of 2006.
    Any suggestions?
    Cheers,
    Gart

    Gart,
    I ran your code -
    SQL> select sysdate from dual;
    SYSDATE
    24-JAN-06
    SQL> select to_char(sysdate, 'Day') as Today from dual;
    Today
    Tuesday
    SQL> select
      next_working_date,
      to_char(next_working_date, 'Day') as next_working_day
    from
      (select add_working_days(4, sysdate) as next_working_date from dual)
    SQL> /
    NEXT_WORKING_DATE    NEXT_WORKING_DAY
    30-JAN-06            MondaySo it seems to work for me, are you sure it's not your NLS settings or your date formatting code that isn't displaying the year correctly?

  • Calculating number of days without weekend and holidays

    Hallo all,
    can someone help me with a formular to calculate the number of days with Crystal Reports 2008 between two dates without weekends and holidays
    eg.
    date one = 03/24/2010
    date two = 03/29/2010
    Result should be 4 days as 03/27 and 03/28 will be a weekend.
    Plus how to exclude holidays ?
    Thank you very much
    Gerald

    As Doug mentioned, Holidays are very location specific, and are you talking about "corporate holidays" where the company is closed, or "public holidays" where banks (<g>) are closed?
    I'd suggest setting up a calendar table (if you don't have one already), one record per date.  You could make it work-days only, days-off only, or all dates with a flag to indicate if it is a work date.  You could then use that to count the number of work days.  By using a table, you wouldn't have to change any code to (a) extend your calendar to the following year, or (b) change holiday dates if the holidays change.  (I'm thinking corporate holidays, where the company might be closed Friday 12/24/10 in observation of Christmas, but would usually only close on the 25th.)
    HTH,
    Carl

Maybe you are looking for

  • How do I support multiple custom WSDL files in one application?

    I am developing an application that will integrate with SOD. This application will be run at multiple customers - each of which could have their own set of custom fields defined for the various objects that we're interested in. Is there a web service

  • I have music from old cassettes in Itunes - Track  problem

    My problem is, I have music from old cassettes that I transferred to computer.  Put into Itunes without track#s, but say the name of album song 1, album song 2, etc.   In the SONGS list it shows all songs in ORDER.  then when I click the same in ALBU

  • Join on 5 tables

    Hi, I have a requirement as follows: I need to Extract all vendors from LFA1 (Vendor Master including addres, email..etc.), joining with lfb1, adrc, adrct and adr6, I wrote a query it is not working as I expected, can any body is having an idea of jo

  • After Effects CC 2014 quits unexpectedly on launch; GPU Manager Error

    Hello, Here's the symptom: AE crashes every time I launch it. After Effects Alert: Last log message was: <5336> <GPUManager> <2> Sniffer Result Code: 3 System specs: Windows 7 64 bit,intel core i5 4690,8gb ram,GTX 760 2gb After effects version CC 201

  • Is iOS 6.0.1 effects home button?

    Is iOS 6.0.1 will effects home button? my iPhone 4 home button seems not really sensitive now and need to press few times then only able to exit the application. How to check is the home button issue?