Add yes/no option in forms

Is it possible to add a "Yes/No" option in the forms to be used in conjunction with the skip logic feature?

The answer is likely yes though I would need to know more to be sure.
Randy

Similar Messages

Add button to SharePoint 2013 form with InfoPath and/or SharePoint designer

Since I am new to working with Sharepoint 2013, I have the following questions to ask you about Infopath 2013 and possibly SharePoint Desinger 2013:
1. Yesterday I created a custom list in my 'test area of SharePoint' and opened the list in Infopath 2013 to see what the form would look like. Now I have alot more columns and edits to add to the list. I am planning to add more columns to the list when
I am in my 'test area' and then make cosmetic changes to the form using Infopath 2013. I am thinking that if I continue this way, I may lose some ediut changes I have made using Infopath 2013. Thus can you tell me the best way to add more columns to the list
and/or modify the existing columns and not lose the edit changes that I made using Infopath 2013?
2. The infopath 2013 form does not contain any buttons to click. I need a button to show up for every user to click so that a workflow can be started. Do I need some kind of a task list(action)? Thus can you tell me how to add this type of a button to the
form?

Wendy, Please go through this video from
channel 9 (http://channel9.msdn.com/Blogs/NickDallett/InfoPath-2010-Customize-a-SharePoint-List-Form) which will uilding froom explain similar form building from scratch.
As per Peter's replay yes you can update form even after add columns in list and you can add extar control like button to your infopath form.
Workflows are usually started when creating or updating an item inside a SharePoint document library.
Open the workflow in SharePoint Designer and under "Start Options' on the workflow's home page, remove the check from "Start workflow manually...". Be sure the check either "Start on create..." or "Start on change...". In
your case I think you would use "Start on create...".
Hope these inputs will help
Please 'propose as answer' if it helped you, also 'vote helpful' if you like this reply.

How do I add spoken content in mp3 form to Audiobooks?

How do I add spoken content in mp3 form to Audiobooks?
I have tried drop & drag, adding a folder ect.
It always goes into the music folder. I have unchecked the box in advanced options, as well.
Thank you any suggestions.
PB

See the FAQ at this site.
http://aldoblog.com/audiobooks/

Unable to sync my movies in the i tunes 11 library i try to add the mp4 video by using the add to library option but the movie does not sync while the music is syncing fine...

i am unable to sync my movies in the i tunes 11 library i try to add the mp4 video by using the add to library option but the movie does not sync while the music is syncing fine...

I had the same issue. What I did was save the movies on a thrid-party app like Download Manager Lite. Once downloaded, go back to itunes, go to your iDevice, go to apps and transfer the app, then scroll down and click on the app and from there you can send the movies to that app and WILL play. Can only hold up to 8 videos/movies (this is for iPod Touch 3G or better, iPhone 3s or better, iPad requires iOS 4.3 or better)
YES THIS APP SUPPORTS .mp4
From other ipod (nano, classic): I don't remember.
If your just putting them on iTunes, it should show and play on iTunes no problem.
Message was edited by: keeferaf

How do i add whatsapp sharing option in ios8?

Is it possible to add whatsapp sharing option in ios8

Can a feature request be made for this option? My form has a copy being sent to their Manager, but would also like a copy to go to their HR Coordinator as well. Will eventually be processing around 3,000 / year and would be helpful for our process.

Text editing - can you add text editing options on the 'in-browser editing'

Text editing - can you add text editing options on the 'in-browser editing' tool?

You can only replace existing content, not edit the page structure. Refer to the respective help sections.
Mylenium

How can i add rows in a tabular form

Hi,
How can i add rows in a tabular form with out updating in database and after adding the rows one by one and after filling the data then iwant to submit them all at once.Please help me on this.
Thanks

Hello Leandro,
In the Add_Rows page process, there is a box for "Number Of Rows". Change that value and you change the number of rows that get added. The default is 1.
Don.
You can reward this reply by marking it as either Helpful or Correct :)

Can you create a button that adds specific text to a form field?

Hi,
I was wondering if it was possible to create a button in a PDF that, when clicked, adds specific text to a form field?
I am trying to make a product catalogue where you click on a product button to add the product name or code to a form field.
Each product in the catalogue will have a button and the more you click the more is added to the form field(s).
Then when you have finished adding products to the form field(s) I want to be able to save and email the entire PDF as an order form.
Any thoughts would be appreciated!
Cheers,
Jim

Yes, it's possible. The most simple version of such a script will be something like this (used as the button's MouseUp event):
var v = this.getField("Products");
if (f.value!="")
f.value += ", ";
f.value += "Product1";

How to add a new option for group by in a excel report

Hi,
there is a enhancement in a excel report
I need to add a new option for group by
help me
Regards,
Raghu

k

How to create add-on of a system form in sap b1 9.0?

Hi all,
I have a problem related to the creation of a system form add-on of sap b1 9.0.
I can develop some projects in visual basic, but about sap b1 add-on, I know how to package files of to install (.ard and .exe files) and I also know how to register .ard file in sap b1 9.0, So I tried to register all projects found in SDK sample folder that was correct.
I tried to do an example of project found in SDK Help Center.
But the problem I have to day related to the creation of system form add-on.
The steps I tried to do are:
1. I opened SAP B1 Studio for Microsoft Visual Studio
2. Right click my project and add the system form (Employee Master Data)
3 Connection string I used in Command line arguments 0030002C0030002C00530041005000420044005F00440061007400650076002C0050004C006F006D0056004900490056
4. I added one field (CFL of BPCode) to Employee Master Data. I did n't add any reference because when I add UI API Vission 9.0 to system form or user form of sap b1 it gives errors in Menu.vb. I do know why.
5. I converted in 32 bit and build my project
6. I re_opened new visual studio 2010 for creating new project with SAP B1 AddOnInstaller.NET Wizard
7. From here I did every thing according to the video of Bryan Gomez
Creating and Registering SAP Add-on - YouTube
8. I registered my .ard file
9. But when I start my add-on it gives error (Add-on connection timed out)
The questions I want to ask,
1. If you are creating the add-on of system form Is there any other thing needed to do more than the above I explained?.
2. Is it necessary to go in SDK code when you are using the system form like that?.
3. If it is necessary to add reference of UI API in project, how to handle error occurs when we add that the reference to the project which is using a system form?.
Please anyone who has an idea he/she can help me.

Hi pallavi p,
That's good but as I said above when I add the reference of UI API Version 9.0 in the project which has the system form or user form of sap b1 it exactly gives errors in menu.vb of the project.
So let me give you the way you can try.
1. Open new project/ visual basic/ sap business one/ sap business one add-on project. and save it any where
2. Right click on your project
3. Add new item
4. Sap Business One
5. System form (Employee master data) or user form
6. Add
And then if your form is opened
7. Go to add the reference of UI API Version 9.0
8. Check errors found in menu.vb (or in OutPut)
So if it's possible try to solve that problem.
Please anyone can help me.

Can I cause checking a box to add 1 to a calculated form field? I have a field that sums the numbers entered in several previous fields and need to be able to add "1" if a checkbox is selected as well.

Can I cause checking a box to add 1 to a calculated form field? I have a field that sums the numbers entered in several previous fields and need to be able to add "1" if a checkbox is selected as well.

I think it has something to do with the way the value of the check box is exported, but I'm not sure. With nothing being exported to Data5, Data6 displays the sum of Data1-4 rounded down to the nearest whole number and updates automatically as Data1-4 are updated.
Right now, assuming Data1-4 are 0, where data 5 is the output of the second example and any box is checked, "1" is displayed in data5 but nothing is added to data 6. Selecting any other check box or deselecting that check box will cause data6 to add 1 even if data5 displays "0". By way of example:
Selecting Check box 16 results in Data5 displays 1 and Data6 displays zero.
Then, if any or all of Checkbox17-20 are selected, Data5 displays 1 and Data6 displays 1.
Then, if any or all of Checkbox17-20 are deselected, Data5 Displays 1 and Data6 displays1.
Then, if Checkbox16 is deselected, Data5 displays 0 and Data6 displays 1.

How to register add-on of edited system form in sap b1 9.0?.

Hi all,
I have a problem in SAP b1 9.0.
Actually I added one field of BPCode to Employee master data, so I want to register an add-on of that system form in SAP b1 9.0.
When I create file of .ard as we watch it in video of
Bryan Gomez
Creating and Registering SAP Add-on - YouTube it will be created correctly, But the problem is when I register that the file of .ard it gives error (Cannot create a file when that file already exists). Again when I create a file of .ard of any other User form it gives the same error (Cannot create a file when that file already exists).
But when I create and register the add-on of Hello World in Sample folder of SDK it will be registered correctly.
How can I solve that problem.
Anyone can help me please.

Hi pallavi p,
That's good but as I said above when I add the reference of UI API Version 9.0 in the project which has the system form or user form of sap b1 it exactly gives errors in menu.vb of the project.
So let me give you the way you can try.
1. Open new project/ visual basic/ sap business one/ sap business one add-on project. and save it any where
2. Right click on your project
3. Add new item
4. Sap Business One
5. System form (Employee master data) or user form
6. Add
And then if your form is opened
7. Go to add the reference of UI API Version 9.0
8. Check errors found in menu.vb (or in OutPut)
So if it's possible try to solve that problem.
Please anyone can help me.

Opening or saving photo attachment; add to iphoto option on save

On my computer, in the Mail application, I always see the "Add to iPhoto" option on the Save button when someone has sent me a photo regardless of whether it is one or several. Does anyone know if there's some way to make this option show or not? I was working with someone on their first version Intel iMac which we had just upgraded to Leopard, and on one e-mail with several photos, the option showed. However, on an e-mail with only one picture it did not. Does anyone know what makes the "Add to iPhoto" option show or not show?
My other question is regarding the contextual menu option "Open with" that shows when I right-click a photo received as an attachment in an e-mail. On my computer, when I right-click and then click this "Open with" option, I see a list of several options for opening the picture, one of which is "Import and View with iPhoto." When I looked at this on the person's computer referenced above, there were no programs listed, only the "other" option which opens a window for you to locate the program you want to use. I did not populate the list on my computer--the choices simply were there when I clicked "Open With." Does anyone know what makes these options appear in this list?
I ask because this person I am helping is not very computer savvy and these are the easiest ways for her to get pictures sent to her into her iPhoto library. I've tried searching Apple support and these boards, but haven't come up with an answer. Does it possibly have anything to do with the version of iPhoto you are running, or is it something to do with Mail? Thanks for any help on this.
Message was edited by: Barbara Batchelder

Ernie,
Thanks for your response. I took a look at the article you mention and will perhaps try replacing the preferences file mentioned if no other solution comes to light. I won't be able to try this right away as I won't be at the person's house right away. She is the main user of the computer and does have Admin privileges.
She had called me a week or so ago wanting to know how to get a photo someone sent her into her iPhoto library, and when I was explaining how to do it, the options available to me on my computer were not available on hers. So, when I was there yesterday, after upgrading her system to Leopard, I went into Mail and was going to show her how to get the photo into iPhoto. I thought maybe the difference was I already had Leopard and she was still using Tiger. However, the "Add to iPhoto" option wasn't listed on the Save menu in the mail with the picture nor was the "Open With" list populated. However, when I went to another message in her mail with several pictures attached, the "Add to iPhoto" option was there on the Save menu. That got me curious about why these things would be different. Why would the "Add to iPhoto" option show on a message with multiple pictures and not on the message with just one picture? On my computer, I get the message regardless if there is one picture or several in the message.
I see that article you referenced mentions the list getting populated based on programs that are used, so maybe I should try opening various programs and seeing if that gets them added.
Any other thoughts you have would be welcome.
Barbara

Is there an easy way to allow usrs with Adobe Reader to add images to a PDF form?

We are using Adobe Acrobat 10 Pro.
We are currently using the "Ruber Stamp" tool to add customer logos to our forms in order to "Brand" the forms for our customers to use with thier customers.
We would like to make this a simpler process, self-service if possible.
We currently add fillable fields to the form and save with Adobe Extended Features so the customers can fill out the form for their customers and save the changes.
Is it possible to add a field where the customer could click on it as be prompted to load a .jpg ir giff into the field in order to brand it themselves?
They would need to be able to save the change just like all the other fillable fields.
Any thoughts on this one?
If we can't make it self service, is there a better way to do it internally than the Rubber Stamp wher ethe technician could click on the cielf and input the image directly rather than first creating the stamp?
Any help is much appreciated.
Best Regards,
Steve

If you can get your users to use Reader 11, there is a way to do what you want if they are able to convert the images to PDF first. This is relatively simple these days as Ofiice applications can do it and anyone on the Mac can use Preview to convert an image to PDF. It involves setting up a button so that its layout is something other than label only and using the following code in the button's Mouse Up event:
event.target.buttonImportIcon();
This is not available with previous versions of Reader, but it is available with all versions of Acrobat, so you'll be able to test it with Acrobat 10. For more information, see the documentation: http://livedocs.adobe.com/acrobat_sdk/9.1/Acrobat9_1_HTMLHelp/JS_API_AcroJS.88.739.html

How to add a java option in oas 10g 9.0.4?

I need add a java option in my oas 10g...
I have an application implemented with jdeveloper 10g (10.1.2) and its need to use other jdbc libraries acording:
http://radio.weblogs.com/0118231/stories/2005/05/27/workaroundForDeployingAdf1012AppUsingIntermediaDomainsToOracleAs904.html
Using EnterpriseManager, i add a java option for the OC4J instance where my ADF 10.1.2-based application will be deployed:
[b]-Xbootclasspath/p: C:\oracle\infra\jdbc-10.1.0.4\ojdbc14.jar;C:\oracle\infra\jdbc-10.1.0.4\orai18n.jar
but now, ths oc4j instance dont init
...my opmn.xml file contains:
<process-type id="ADF_050615" module-id="OC4J">
<module-data>
<category id="start-parameters">
<data id="java-options" value="-server -Xrs -Djava.security.policy=C:\oracle\infra\j2ee\ADF_050615\config\java2.policy -Djava.awt.headless=true
                         -Xbootclasspath/p: C:\oracle\infra\jdbc-10.1.0.4\ojdbc14.jar;C:\oracle\infra\jdbc-10.1.0.4\orai18n.jar"
                         />
<data id="oc4j-options" value="-properties"/>
</category>
<category id="stop-parameters">
<data id="java-options" value="-Djava.security.policy=C:\oracle\infra\j2ee\ADF_050615\config\java2.policy -Djava.awt.headless=true"/>
</category>
</module-data>
</process-type>
Help me please

Rigoberto, there should be no space between "-Xbootclasspath/p:" and the path "C:\oracle\infra\jdbc-10.1.0.4\ojdbc14.jar;C:\oracle\infra\jdbc-10.1.0.4\orai18n.jar"
By the way, one can always take a look at the logs at
  $ORACLE_HOME/opmn/logs
especially those files whose names start with OC4J~ if there is some wrong with oc4j processes. Those files are the default oc4j stout and sterr. If oc4j can not init, there should be some kind of error message in them.
By the way, the following line may be deleted since no property file is specified.
  <data id="oc4j-options" value="-properties"/>
Hope this helps.

Add yes/no option in forms

Similar Messages

Maybe you are looking for