Configuration of Company Level for a sponsor ID

Dear Team:
There is a requirement stating that each company code level there is one sponsor ID, which should be defaulted for every employee in the organization.
For example:
Company Code 1000 and it's sponsor ID 65838.
Any employee belonging to company code 1000 should have a sponsor id 65838 defaulted to the employee.
My idea is to use the infotype 0185 Personal IDs using a dynamic action. Is it possible and if so, how?
Else
Is there any other way to do the same.
Please let me know.
Regards
Mallikarjun P
[email protected]

Though the requirement states that it is at company level, but when I do the same using it in the infotype 0185, it is at employee level. Is it justified to do the same at employee level?
Regards
mallikp727

Similar Messages

  • Assign company code for subsequent settlement at Plany level

    Hi
    I am configuring "MM Subsequent settlement" in IMG
    In the step - Assign company code for subsequent settlement at Plany level" , i can not add my purchasing organisation and assign to company code. There is no option for "New entry" in the change mode.
    Could you please suggest?
    Best regards
    Vijay

    Hi,
    Assignment is only possible or necessary for purchasing organizations to which a company code is not assigned.
    SAM

  • How to configure evaluations at level task only for released projects?

    Hi,
    Does anyone know how to configure evaluations at level task only for released projects?
    What we need is that the evaluation will be executed only when project has released status. Is that possible?
    Thanks a lot,
    CAMILO URIBE

    Hi CAMILO,
    After the notes 1422722 & 1465106 is a service method  available, which allow the customer to dis-able the evaluation.
    CL_EVE_EXTRACT_FACTORY        SET_ACTIVE
    You can put a codes in some BADI method, which is called during save. Within the Badi-Implementation, call the SET_ACTIVE method, so that the evaluation not be tiggered (until the project get released.)
    KInd regards,
    Zhenbo

  • Inter Company Billing (for order-related)

    Dear SD Expert,
                  I have problem with "Inter Company Billing". What I have searched are showed in term of "Inter Company Billing (for Delivery-related). But, my case is about "Inter Company Billing (for Order-related). Thus, I got problem in created inter-company billing.
    <u><b>Ex</b></u>  In "Copy Control from Sales Order to Billing", the configuration guide suggest me to use "014 (Hdr dlv.rel.IC bill.)"; but, I didn't want it to copy from delivery order. How can I solve it?
    Could you help me on that?
    Best Regard,
    Prach

    Hi,
    I saw in SAP Forum that you faced a similar problem sometime back as I am facing now.  Just curious to check whether you had a solution for the same, if so, please share with me.  Please see below for my problem.
    We are using SAP R/3 4.6C version. Normally, the inter-company billing are delivery related and this is working fine. I am configuring the order related Inter-company billing, i.e. Third Party drop shipment with Inter-company. I refered to SAP notes 203876, 63459, 381042 and maintained the copy control between OR => IVA (for TAS) as follows:
    Copying requirement = '013',
    Invoiced quantity = 'F', (*)
    Quantity/value = '+',
    Pricing type = 'G'.
    The issue I am facing is when I try to create an Inter-company invoice (after the F2 Customer invoice), the End customer details is being pulled instead of the Inter-company customer details. In other words the Inter-company invoice is also being issued to the End customer. Also the prices are showing in negative.
    Kindly share with me if any of you guys know a solution for this. I have searched all the SAP forums, but couldn't find a similar issue.
    My concern here is, in none of the SAP notes, there is no information about the copying requirement at the header level between OR=>IVA. I am not sure whether this is causing the issue.
    My mail id is "[email protected]".
    I would appreciate your reply to this message.
    Regards,
    Saravanan

  • View B/S and P/L on Company level.

    Dear Experts,
    I have configured Company through OX15, also assigned the company code with the same.
    I want to know from which transaction code we can view the B/S and P/L account on company level.
    Please noted not in comapny code lever but by company level.
    I want to view the consolidated BS and PL for my group.
    Regards
    Uttam.
    Moderator: Please, read about the basic concept of SAP and the difference between Company and Company code

    Hi,
    If you want to report group level then goto F.01 or FGI0 there select your group chart of accounts and enter your Group FSV and excute.
    Regards,
    nauma.

  • Add new company (subscriber) for partner application

    Hi
    I want to add new company (subscriber) for partner application that is accessible from portal.
    and I want to get username , password , company in login page and change the login page to accept 3 parameter but I don't know what is the next step . and where can I define my company and define user for the company .
    Thanks
    Roshanak

    Hi,
    1. Get info regarding the chart of accounts.  It forms the basis  for FI\
    2. Though automatic postings are not regular, check the required details for configuration for APP.  If you are going for APP, u need to check house bank also
    3. Check the tax procedures (Varies between countries) - Sales Tax and Withholding tax config
    4. Payment terms
    5. Discount received / paid configurations
    6. Dunning details - Check if existing standard SAPscripts will suffice ur needs.  Else u may need the help of ABAPers
    Regards,
    Sridevi
    <i><b>Award points, if useful</b></i>

  • Set Up Payment Methods per Company Code for Payment

    Hi All,
    Can any expert please suggest whether do we need to enter only paying company codes while defining the payment methods per company code or enter all company codes.
    Ex: We have 10 company codes for which there are 3 paying company codes. After defining the payment methods in the country, while defining payment methods per company code do we need to  define for only 3 paying company codes or for all 10 company codes. Because when you are paying through one company code on behalf of three company codes, how does it make sense having the payment method in company codes which are not paying. I hope my query is sensible.
    Thanks&Regards
    Srinivas

    Generally Payment method is defined for a customer at Company code level and Sales area level. Through Partner function we can control who has to make payment. In your case , if you need to define different customer as payer you can do so in KNVP table. while making sales order payment terms will pick from Payer of the Sold to patry customer.
    Not sure why do you wants to link to Company code

  • Route not determing automatically at sales order level for some sales order

    Dear All ,
    Route not determing automatically at sales order level  for some sales orders.We are using automatic route determination without wt group,eventhough we have configured the required settings
    I have checked all the forums but didn't find any solution for the same.
    Looking for your inputs .
    Thanks inadvance
    Regards
    Venkat

    Hi
    1. Copare the Routes which are Automatically determined and which are not automatically determined
    2. Have you mainted this route to be RELEVANT FOR TRANSPORTATION without this check route will not get picked up.
    SPRO > Logistic General > Shipping > Basic Shipping Function > Routes > Define Routes > Define Routes and stages > Select the Route and check for it's settings > CHECK MARK Relevant for Transport. Without this check the route will not get picked up as of my understanding.
    Thanks
    RB

  • Configuring double invoice check for vendor invoices posted through FB60

    Dear all
    Can anyone tell me how to configure double invoice check for vendor invoices posted through FB60.
    for miro documents..we can use Tcode OMRDC
    Is there any such tcode which can be used for configuring fi invoices for double checking..
    regards
    Expertia

    Dear Expertia,
    In FI,when checking for duplicated invoices, the system compares the
    following :Vendor, currency, company code, gross amount of the invoice,
    reference document number and Invoice document date.
    SAP Note 305201 clarifies this in a more details; please read it.
    The following fields must be identical for Duplicate invoice check
         Company code                              (BUKRS)
         Vendor number                             (LIFNR)
         Currency                                  (WAERS)
         Reference number                          (XBLNR)
         Amount in document currency               (WRBTR)
         Document date                             (BLDAT)
    If the document is having any one of the above filed different then the
    system does not consider it as a duplicate invoice.
    Also It will check duplicate invoice check in vendor master data and
    in posting key is there check box selected for sales related
    The setting you making in OMRDC i.e Materials management->Logistics
    Invoice Verification->Incoming Invoice ->Set Check for Duplicate
    Invoices is only valid for MM and not  FI invoices posted via FB60/FB65
    You should check the F1 help on field "Chk double inv." (LFB1-REPRF)
    in the relevant vendor master record (transaction FK03).
    Please also check, that message F5 117 has been set correctly in the
    IMG using this path:
    Financial Accounting -> Financial Accounting Global Settings ->
    Document -> Default Values for Document Processing -> Change Message
    Control for Document Control For Document Processing
    Finally & mainly, go to the relevant posting key is defined as sales
    related in transaction OB41. You have to flag this field if the
    duplicate invoice check should work.
    I hope this helps You.
    mauri

  • Retrieve permision levels for all items in list programatically

    Hi all,
    I need to retrieve all permission levels for all items in a list programatically using client object model in sharepoint 2010.Please send me the code sample.
    Regards,
    Praveen

    Hi Praveen,
    This blog has the code that you are looking for -
    http://www.learningsharepoint.com/2010/07/27/programatically-get-permissions-for-list-and-item-client-object-model-sharepoint-2010/
    or this forum for an idea -
    http://social.technet.microsoft.com/Forums/sharepoint/en-US/6b16b407-203b-4c5b-9605-713904e9b22e/sharepoint-2010-how-to-get-a-list-of-permissions-for-each-individual-user?forum=sharepointadminprevious
    Hope this helps!
    MCITP: SharePoint 2010 Administrator
    MCTS - MOSS 2007 Configuring, .NET 2.0
    | SharePoint Architect | Evangelist |
    http://www.sharepointdeveloper.in/
    http://ramakrishnaraja.blogspot.com/

  • Can we create two different Segments at client and company level

    We have a particular requirement in segments reporting. we have to provide product wise segments reporting at client level and for income tax purpose one of our manufacturing plant has to maintain a separate books of accounts for this purpose we want to create a separate geographically at company level of this plant which is in different state. can we create this type of segments for separate books at company level.
    If there is any other process where we can get separate books of accounts.

    Dear,
    Of course you can do this but only worrysome thing will business users will be confused between the Plant and product line business segment.
    You must have Product Line (for e.g. segment 1000) is manufacture at plant 1000 (segment 2000), so when any expense occur in Plant 1000 for Product Line 1000 which segment should be used???
    So give precedence to segment whichever you want......and costantly monitor entries being posted to thses segment...
    Regards,
    Chintan Joshi

  • Record the NOC codes at Job level for a particular country

    Hi,
    How do we record the NOC codes at job level for a particular country say for example canada?Which infotype the NOC codes exist and can be added to employee record?Is it through statistics infotype?
    I could find that table T5K13 can hold these codes at job level, but unable to find a way to create  a relationship between a job and the NOC codes.Please help if there is a way in our current SAP environment to record those codes on the job and if so how?
    Also, if the initial configuration has not been done  to add these codes at the job level what would be required to allow  to maintain this.
    Please help!!!
    Thanks in advance.
    Rakesh

    hi
    in the view V_T5K13 , double click on the job code , there will be feild to add the noc code
    Regards
    sameer.

  • Printer not configured at Invoice level (vf02) - Jetforms

    Hi all,
    Here i need to trigger an output for an Invoice for a particular printer, but when i checked at VF02, i found printer looking for was not configured !!
    And this invoice is maintained through Jetforms, so it needs to check at Jetform server level, i guess
    So anyone could please suggest me, how to get print of Invoice for the required printer
    Thanks in advance

    Hi,
    If printer / device is not configured at application level i.e. VF02, we can make replica of that printer at Jetform server level.
    So first trigger the print through an available printer, now access to Jetform server, there you will find the related spool, just copy that file to desktop with name change.
    And now when you open the spool, you'll find the Job name follows with the printer name, here you replace the existing printer name with the current printer name, which you're looking for.
    Copy the file to DATA folder, hence automatically it triggers the print from the required printer, job is done !!
    Let me know for any concerns.

  • Company level report

    Dear Friends,
    we are implementing Fi, sd and mm module in one client .
    for that we have created 11 company codes , all company codes having different currencis i.e local currency , for example dubai is having one co code having dirham as co code currency, similarly kenya  co code is having kenya shilling as co code currency ,and saudi is having saudi riyal as co code currency .
    for each compaby code we have one co code currency , one global company currency , and one group currency ,
    we assisned all 11 company codes to one 'company' called 'ABC'
    Now the requirement is we want all financial statement at company code levels and bussiness area level in all three currencies .and we want report at company level i.e ABC .Please tell me how we will get report at company level .
    we are not implementing consolidation module .even we are are not implementing controlling module
    thanks
    Praks

    Try this report S_ALR_87012169, This should show you the information
    Assign points if helfpul

  • Configuring cross company charge

    Happy new year to all!
    I'd like to know if anyone has been successful at configuring EBP to allow an user to charge across multiple companies in one shopping cart. If so, could you please provide some info here on how to go about setting that up? Or where I could find further information on cross company charge?
    Greatly appreciated,
    SN

    Hi,
    Please assign the different company codes for user atribtes itself..then try to shop then definitely you must see differnet company codes if you go details tab...
    Thanks
    Ravi

Maybe you are looking for