Adding 2 different rows in the Table in JSF

Hi All,
How can I acheive this in JSF
Let me explain my requirement:
Consider a simple table which is displaying rows.
It has columns say col1->colId and col2->colName.
Id     Name
1     kk
2     jjNow on clicking the colId of row1, another row say row001should be embedded in between row1 and row2. Now this row001 should contain 3 columns each having 2 rows.
Id     Name
1     kk
     DOB     ABC     Curr     Yen
     Nation     EUR     State     Thames
2     jj
               So the extra details such as DOB, Nation, Curr and state are hidden for id and is displayed only when user clicks Id and collapse when user clicks id again
Don't forget I am novice to JSF :(

What you need is a tree.
See Tomahawk (www.myfaces.org)

Similar Messages

Problem while adding a new row to the table.

hello,
In my ADF form i have a table. and when i click on CreateInsert it add a new to the table but at the first. i want all the new rows to be added at the end of the table in a sequence. how can i do this?....
Thanks and Regards,
Rakshitha

Hi,
Try this:
DCIteratorBinding dciter;
BindingContainer bindings = BindingContext.getCurrent().getCurrentBindingsEntry();
dciter = (DCIteratorBinding) bindings.get("findAllTestAndryIter");
ViewObjectImpl vo = dciter.getViewObject();
if (vo != null)
Row row = vo.createRow();
int rangeSize = vo.getRangeSize();
int rowsInRange = vo.getAllRowsInRange().length;
int insertPos = rowsInRange < rangeSize? rowsInRange: rangeSize - 1;
vo.insertRowAtRangeIndex(insertPos, row);
vo.setCurrentRow(row);
}

SUM two fileds from different rows from the same table

I would like to SUM two fileds from different rows from the same table but I don't know how to do that.
E.g.
BillingTransactionsIndex      CreateDate      UserType      UserIndex      TransType      Reference      Total      Balance
2      6/5/2008 15:02      1      51      1      150      -288.2      -288.2
5      6/8/2008 11:55      1      51      1      157      -1.58674      -289.787
In the table above I want SUM fields Total and Balance for the first row and the the next row SUM 2nd row Total with 1st row Balance
Please help
Thanks

SQL> with tbl as
2 (select 1 as ID, 90 as total from dual
3          union all
4 select 2 as ID, 23 as total from dual
5          union all
6 select 3 as ID, 15 as total from dual
7          union all
8 select 4 as ID, 20 as total from dual)
9 select id , total, sum(total) over (order by ID) as balance from tbl
10 /
        ID      TOTAL    BALANCE
         1         90         90
         2         23        113
         3         15        128
         4         20        148
SQL>

Adobe form from webdynpro : Getting a single row in the table

Hello,
I have a scenario in which I have to create a adobeform from webdynpro application.
I have created the form and have the context designed in place.
I am facing a problem in the table I have in my adobeform.
I am adding rows to this table dynamically using a button using "addInstance"
Now on the webdynpro side , when I try to read this table I get a single row from this table.
This row is always the first row of that table.
I checked the following things from blog   /people/juergen.hauser2/blog/2006/09/12/avoiding-common-mistakes-when-using-tables-on-sap-interactive-forms , i.e. :
Cardinality of the node.
Tick on the option "Repeat Row for Each Data Item".
But still no success.
With deadlines to catch I had to post this question after trying a lot.Please help.

Hello Otto,
I had found this link before and used the same solution , but unfortunately is taking a long time.
Now what I am doing is :
1. I append 10 rows into the table then bind it to the node
2. Then on the adobe form I have removed the check on "Add row for each line item" because of which it shows only 1 row
     on the form.
     Now I add rows dynamically, but this puts a limit on the number of rows can be added to the table i.e. 10.
But this again has added problems like while displaying the form or modifying I hav to handle it seperately and cannot use the same form as it is.( as I have removed the tick for "Add row for each line item" ).
Thanks,
Omkar Mirvankar

Problem in adding a new row in a table.. plsss hlppp

Hi Friends,
I have a table defaulted to 4 rows. I have a add button to add a new row in the table.
When i have already 4 rows in table, and when i click add its adding that 5th row correctly( and i used set_lead_selection for this new row ).
But i want to automatically make a next page once i hit the ADD button here. Each time now i m hitting next page then only able to see hte 5th row. I need once ADD is clicked, i want to see the 5th row visible..
Can someone tell me how to code or do this
thanks friends,,,
Niraja

hi niraja,
Plz refer to the following code:
method onactiononadd .
node_material type ref to if_wd_context_node.
elem_material type ref to if_wd_context_element.
stru_material type sflight.
node_material = wd_context->get_child_node( name = 'ANNA' ).
elem_material = node_material->get_element( ).
if ( elem_material is initial ).
call method node_material->create_element
receiving
element = elem_material.
endif.
call method elem_material->get_static_attributes
importing
static_attributes = stru_material .
call method node_material->bind_structure
exporting
new_item = stru_material
set_initial_elements = abap_false.
endmethod.
i hope it helps
regards
arjun

Get all the rows of the table

Hi,
     In my example I want to get all the rows of the table. The table has 20 rows. The visibleRowCount is set to 7 and firstVisibleRow is set to 3.
     I have created the table as
     var oTable = new sap.ui.table.Table({
           id: "oTable",
           title: "My Table",
           visibleRowCount: 7,
           firstVisibleRow: 3,
           selectionMode: sap.ui.table.SelectionMode.Single
     I tried to get the rows of the table using the below code
     var table = sap.ui.getCore().byId("oTable");
     var rows = table.getRows();     //     Returns only 7 rows
    How to get all the rows of the table when the table is populated with a odata service ?

Hi Vishal,
The table only put in the html file the rows that you define in visiblerowcount (rows control). The method getRows, get this controls, and you only have 7. The table control render automacatically the data in thats rows when you scroll on it.
If that you want is to retrieve the data of the rows, you need catch it from the model:
oTable.getModel().getData();
Regards,

Can I use action build to fade one table row as I move to the next row in the table?

I have built a table with 6 rows. Right now,I am building the table row by row when I play the slide. Is there a way to fade or dissolve one row when I move to the next row in the table? I want to be able to de-emphasize the row I just discussed when I move to the next row in the table. I can fade the entire table by invoking that action but I do not seem to be able to use this action one row at a time. Thanks for your comments and assistance.

you will have to use a workaround to get the exact effect you described
create a table with out any text
use text tool to add text and position in each table cell
select the text boxes( command click) in the first row and group them (arrange > group)
use a, build in, to display text and then a, build out, to remove it
repeat the above for the other rows

Trapping the selected row in the table using boolean checkbox

Hi,
I am using Jdev 11.1.1.2.0 with ADF 11g.
I have a screen that has a table with an additional column of 'Select boolean checkbox'. I have assigned a valuechangelistener method that helps me know which row has been selected. But the issue is it gets fired for all the rows in the table once I select/de-select a checkbox of 1 single row.
How can I handle this? Yes I can iterate through the table rows and check the values of the checkbox. But that is not I want, I also want to trap the de-select event.
What is the way to achieve this?

Timo Hahn wrote:
I don't see a bug in this behavior. This is because each row gets stamped when they render.
The way to do this is to use an attribute (which can be transient) to hold the status of the check box. Exactly this does the link I gave.
TimoHi,
Why I am saying it as a bug is because it is not firing the event for the record where the event has occurred. instead the event is fired for each row which should definitely not what is expected. And because of this we have to add an additional variable.
Now it becomes more complex if I have to handle de-selection as well, b'coz if the valuchangelistener is going to fire for all the records then I need to know which row was previously selected and now de-selected as now the de-selected record will also return a false.
So any better solution, anyone?

Exaprom PDF: how may cells span multiple rows in the table body?

I'm using Exaprom PDF but I have a case I just can't get to work.
I would like to generate a table where a cell spans on an entire row in the table body, the table should result as:
|__|__|__|__|
|__|__|__|__|
|___________|
|__|__|__|__|
Dear Jean-Marc,
could you post an example how to span a cell on an entire row in the table body with the function "Append Customized Table.vi."
For the example, please use the 2009 version.
Thanks,
Asper
This post refers to the Exaprom PDF report generation toolkit:
https://decibel.ni.com/content/docs/DOC-10952
Solved!
Go to Solution.

Maybe this.
Jean-Marc
LV2009 and LV2013
Free PDF Report with iTextSharp
Attachments:
Test Table Merge LV2009.vi ‏113 KB

Default selection of a row in the table

Dear all,
I have given output of one table as the input to an RFC and the output of this RFC is given to a table and the same scenario we followed for the graphs also. By default first row of the table is getting selected because of that the second table or graph is getting displayed without any user interaction. Please tell us how can we avoid the above. I tried by using guard condition of select but i am unable to control it. Please tell us detailed procedure by which directly i can follow the same.
Regards,
Suman.

Hello Suman,
Please, look at 'No First Select from Table' section of this blog: [/people/jarrod.williams/blog/2006/12/14/visual-composer-tips-and-tricks|/people/jarrod.williams/blog/2006/12/14/visual-composer-tips-and-tricks]
Good luck,
Ola

Problems with Click a row in the Table

Dear All,
I am new to Java GUI. I got some problems with clicking the row in a table.
My table allows the user to delete some rows fromt the table. When the user click a row or some rows in my table, the delete button should be enabled. It does work in most of the time. But sometimes, even the row being hight lighted, the button is still not enabled.
Do you have any idea for what can cause this problem?
What I did is :
1. add a mouse listener to the table
_userTable.addMouseListener(new java.awt.event.MouseAdapter()
public void mouseClicked(MouseEvent e)
userList_mouseClicked(e);
2. then, if the row being selected is > 0, I will enable my delete button.
Can anybody help?
Thanks!

Dear All,
I am getting problems with single selection in a table. Although I have set the selection model to single, if I select a row int the table and then depress Ctrl/Shift multiple rows are selected.
The code for set single selection is :
ListSelectionModel seleModel = myTable.getSelectionModel();
seleModel.setSelectionMode(ListSelectionModel.SINGLE_SELECTION);
Any idea about this? Is this a bug in JAVA?
Thanks!

How do I get the numbers ipad app to plot a graph of dates against values, where the most recent date is on the right of the graph, but the most recent date is at the top rather than bottom of the rows in the table?

How do I get the numbers ipad app to plot a graph of dates against values, where the most recent date is on the right of the graph, but the most recent date is at the top rather than bottom of the rows in the table?
Also how can it be a line graph without plotting a circle at each value?
Thanks this is very frustrating

Make a copy of the table and produce your Line chart or Bar chart from the copy. Sort the copy into the order you want to see in your chart.
Alternately you could use a Scatter Chart...
Jerry

How to display more than 200 rows in the table?

Hi Experts,
Is that possible to display more than 200 rows in a Table.
when i query from table, it has 1000 rows, i want to display all the 1000 rows in the Table.
when i query, the values are displaying up to 201 rows only,
when i click next on 200 - 201 it throws Exception says
*"Query has exceeded 200 rows. Potentially more rows exist, please restrict your query."*
let me know how to display all the 1000 rows in a table without Exception.
Any idea will be highly appreciated.
Thanks
Aswath

The number of rows retrieved is controlled by profile option "FND: View Object Max Fetch Size". I believe 200 is the default value. Pl see these MOS Docs
386402.1- Query Has Exceeded 200 Rows
275876.1 - Oracle Application Framework Profile Options Release 11i (11.5.10)
HTH
Srini

Web DynPro ABAP - Disable a entire row in the Table of the output.

Hi Web Dynpro Experts,
Need ur Help.!
I have a requirement to disable the one row of the table in web dynpro ABAP
For example . my table is like
Field1   Field2
A           Success
B            Failure
C            Failure
I need to allow the User to select the record only if its status is Success,if status is Failure then i should not the allow user to select.
This enabling and disabling of the rows should be done before displaying on to the Screen.
Please suggest me ASAP.
Thanks,
Akila

Hi Akila,
please try this.
Create a node (Eg: TEST) of type 0-n and 0-1. Take attributes attr1, attr2, flag (of type BOOLEAN). Create a table and give the TEST node as datasource. Now using "Create Binding" create columns for attr1 and atte2. Now, bind the read-only property of the columns with flag attribute.
Now, in the INIT method, set the table values like this:
For examle, if you want to disable row having test2,
ls_test-attr1 = 'A'.
ls_test-attr1 = 'TEST1'.
ls_test-flag = ' '.
append ls_test to lt_test.
clear ls_test.
ls_test-attr1 = 'B'.
ls_test-attr1 = 'TEST2'.
ls_test-flag = 'X'.
append ls_test to lt_test.
clear ls_test.
ls_test-attr1 = 'C'.
ls_test-attr1 = 'TEST1'.
ls_test-flag = ' '.
append ls_test to lt_test.
clear ls_test.
lo_test->bind_table( lt_test ).
By doing this, 2nd row gets disabled.
Also, if you already have the internal table with values, based on some condition you can change the value of flag and bind the table to node.
Hope this helps you, Please let me know in case of any queries.
Regards,
Manogna

How to list all the rows from the table VBAK

Friends ,
How to list all the rows from the table VBAK.select query and the output list is appreciated.

Hi,
IF you want to select all the rows for VBAK-
Write-
Data:itab type table of VBAK,
wa like line of itab.
SELECT * FROM VBAK into table itab.
Itab is the internal table with type VBAK.
Loop at itab into wa.
Write: wa-field1,
endloop.

Adding 2 different rows in the Table in JSF

Similar Messages

Maybe you are looking for