Adding a "print" link to a document with iweb?

I want to put my resume on my web site and add a "print" button on the page that will only print my resume and not the whole page, but I can't figure out how to do it (if that's even possible on iweb)
Can anyone tell me how to do it?
Thanks!

I see this at the top:
"This question is not answered. "Helpful" answers available: 2 . "Solved" answers available: 1 .
It seems there is a "solved" answer, but gives me no link to go to it. I "searched several different options but could only find one thing even close and that was to embed the facebook page in an iweb page... not what I want.
Is there anyone that can point me in the correct direction to go to the link that gives me the "solved" answer?
Thanks.

Similar Messages

Printing to PDF creates document with only part of the printout, improperly sized

I am printing from a windows application with my Adobe Acrobat Standard 10.1.9, and when it prints (to a standard Portrait size document), only about 25% of the document appears in the PDF, as if I had told it to zoom in on the document.
I want the PDF to comtain the complete document, fit to one portrait sized sheet of paper. I want this to be the default behavior.
Help!

Ok, I think I found what needs to be changed, but I cannot set it "permanently" - that's what I need to figure out now.
When it comes up with the print dialog, I choose Adobe Acrobat as my printer, and then in the print dialog, there is a properties button. That opens a window and one of the options is labeled "Adobe PDF Page Size" - this seems to default to be blank. If I set that to "Letter" everything works as I want.
So the question is, how do I make "Adobe PDF Page Size" default to "Letter" under the Adobe Acrobat properties?

Can we print multiple excise invoice documents with one click?

Hello,
SAP has provided with t-code 'J1IP' for printing excise invoice documents. But for printing multiple documents we need to click print button each time for every new document. is there any other way by which you can print bulk excise documents without clicking print button each time?
Thanks in advance.
Neha

Hi Neha,
It is possible on SAPB1.
Try to Use the Document Printing Window on Financials or Marketing or Banking Module..
Try this,
->> Financials.
-> Choose Document Printing.
->> Open the Document Printing Window.
->> Select the Document Type - Incoming (or) Outgoing Excise Invoice.
for example, IF you Select the Document Type - Incoming Excise Invoice.
->> Select the require Series.
-> your requirement wise, put the tick mark of Open Only or &Only Documents Still to Be Printed.
->> put the Posting Date From Date & To Date.
->> Assign the No. of Copies - 1 or Your wishes.
->> Click the OK button, than will Open the Print Incoming Excise Invoice Window.
->> Choose all Incoming Excise Document (select all row).
->> Click the Print button.
Regards,
Madhan.

Error in workflow while linking goods receipt document with parked invoice

Hi All,
I parked document using Tcode MIRO, when WF has been executed and goods receipt document has been created.At the time that we tried to link this goods receipt to parked invoice document in the workflow,The problem happens with work item saying the status as Error. See the below error.
MIRO Invoice: 801061193 2010 Item: 000001 13.09.2010 09:24:58 Error AP Workflow for MIRO/MIRA Parked Invoice
Can anyone advice why it is coming so?
Thanks in advance.

Hi
In SWEL go to workflow trace and see what exactly is the error. This error description is too generic to arrive at soln.

How to put links in a document with Acrobat 8 or 9?

I have a document that used to have some underscored blue colored words in different places of the document. Clicking on these words Acrobat jumps to another page of that document which is related to those blue words. I don't know why, but I lost those "internal hyperlinks". They do not work anymore. Then, how can I put them back? OR How can I create new internal links like the ones described?
Thanks in advance.....

Welcome to our community
Unfortunately you seem to have taken a wrong turn somwehere and are lost in the forums. Based on what you have said, you are probably using Acrobat?
If Acrobat is the product you are using, try posting the question at the link below:
Click here to view
If you aren't using Acrobat, you might try this other link. Click the link and you will see a page where you may click either some icons or a drop-down to choose the product you are haivng issues with.
Click here to view
Best of luck to you in finding help with what you need. Rick

How to put links in a document with Adobe 9 or 8?

I have a document that used to have some underscored blue colored words in different places of the document. Clicking on these words it jumped you to another page of that document related to those blue words. I don't know why, but I lost those "internal hyperlinks". They do not work anymore. Then, how can I put them back? OR how can I create new internal links like the ones described?
Thanks in advance.....

Welcome to our community
Unfortunately you seem to have taken a wrong turn somwehere and are lost in the forums. Based on what you have said, you are probably using Acrobat?
If Acrobat is the product you are using, try posting the question at the link below:
Click here to view
If you aren't using Acrobat, you might try this other link. Click the link and you will see a page where you may click either some icons or a drop-down to choose the product you are haivng issues with.
Click here to view
Best of luck to you in finding help with what you need. Rick

Adding a Map link over an image with a Z Index setting

I have to add a map invisible link to a spot over an image on a page. If I look in the css file it is as follows
#n141
    z-index: 143;
    position: relative;
    width: 253px;
    margin-right: -253px;
The map must go over the image that covers this area. When I add the map I do not see the link. I would think this has to do with the Z Index how can I get the map to be on the top level without changing the Z Index or can I ?
anyone
rd

Murray you are the man!
http://clmajor.com/CM_Website2012workinprogress4/
the image on the bottom right of the Clarence major needs to have a hotspot on top of that so when clicked it links back to the index. I will not need it on this page but if you click thru the links you will see what I mean.
thz for looking at this for me.
RD

Printing page range in document with more than one page #1

I have an insurance application which has 24 pages numbered 1-6 then restarting 1-18. This is not just the page # at the bottom of the page but the page number that Adobe Free Reader is showing. When on the last page the top of the screen shows [18] 24 of 24.
I want to print the first page 5 which works fine when I print current page or a page range. Then I want to print 1-12 of the second section which I have tried printing as 7-18. This gave me the pages numbered 7-18 of the second section. But if I try printing page 1-12 I get 18 pages or 1-6 + 1-12.
Any help would be appriciated.
Thanks,
Paul

Change the Preference from using logical pages to physical pages and then select the physical pages.
You should provide unique names for the page numbers when you apply page numbers to the PDF and you need to fix them if you merge PDFs.

Can I link a pages document with a numbers document

Hi all,
I've created a spreadsheet in Numbers (2013) and I'd like to be able to automatically populate a form letter (created in Pages 2013) with some of the data from my spreadsheet. Is there any way to do this with the new iWork apps?
Thanks.
John

Apple has removed over 90 features from Pages 5.
http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&sid=3527487677f0c 6fa05b6297cd00f8eb9&mforum=iworktipsntrick
Pages '09 should still be in your Applications/iWork folder.
Archive/trash Pages 5 and rate/review it in the App Store, then get back to work.
Peter

Link MM document with FI document

Hi all,
We have a problem. We can't link the controlling document with billing document (financials document):
1. In FB03 we can view financials document and the link to controlling document with Menu -> Enviroment -> Document Enviroment -> Original Document. (it´s OK)
2. In MIR4, when we touch of the button "Follow-On Document" the financials document not appear.(it's the problem)
Can anybody help me?, please.
Thanks.

Ok thanks,
The problem is: In PO I can´t view accounting document in Document history tab, but if i´m going to FB03 I can view accounting document and I do the link to material document.
Can you help me? thanks.
Regards.
M Navas.

Mailbox and other printer-specific settings are saved with an Excel file

From the KB article:
"When you send a Microsoft Excel workbook to another user account in an e-mail message or store the file on a network share, with the print settings set to print to your mailbox or to a local
printer with specialized settings, these settings may still be in effect for the other users. If they print the workbook, it may either print to your mailbox, not theirs, or it may try to print by using certain settings for your local  printer.
I have several users who occasionally experience this exact issue with Excel 2010. A KB article actually exists for this problem (KB:829766)
and at one point a hotfix was available. I assume this issue was "fixed" at one point however the KB article was updated in April with
Article ID: 829766 - Last Review: April 27, 2012 - Revision: 2.0
APPLIES TO
Microsoft Excel      2010
So it appears that it's acknowledged to be happening in Excel 2010 but the hotfix was pulled. Does anybody have any idea about how to fix this
issue without the hotfix? I tried the registry entry that was mentioned in the KB article but it did not resolve the issue. Is there any other way to get Excel 2010 to ignore printer specific metadata? We do not want to have to deploy a VB script to remove
this information on each sheet.

From the KB article:
"When you send a Microsoft Excel workbook to another user account in an e-mail message or store the file on a network share, with the print settings set to print to your mailbox or to a local
printer with specialized settings, these settings may still be in effect for the other users. If they print the workbook, it may either print to your mailbox, not theirs, or it may try to print by using certain settings for your local  printer.
I have several users who occasionally experience this exact issue with Excel 2010. A KB article actually exists for this problem (KB:829766)
and at one point a hotfix was available. I assume this issue was "fixed" at one point however the KB article was updated in April with
Article ID: 829766 - Last Review: April 27, 2012 - Revision: 2.0
APPLIES TO
Microsoft Excel      2010
So it appears that it's acknowledged to be happening in Excel 2010 but the hotfix was pulled. Does anybody have any idea about how to fix this
issue without the hotfix? I tried the registry entry that was mentioned in the KB article but it did not resolve the issue. Is there any other way to get Excel 2010 to ignore printer specific metadata? We do not want to have to deploy a VB script to remove
this information on each sheet.
I am having a similar issue: Users are saving excel documents onto a notwork share, some are using sercure print others do not use secure print. The users using secure print are saving a document with secure print selected and when others go to print it secure
prints for them. The registry edit will solve if I go to each users machine and add the registry edit, however as we add new users to the company it would be a headache managing who needs this key setup. Is there a way for people who do not want to use secure
print to not inherit these settings? I mean the easy solution is just to have users select the printer properties they want each time they print, but I have come to terms that, that will not happen despite the issues caused.

Quality management document with exercise

Hi friends
Any one please send the link Quality management document with exercise
thanks in advance

Refer
http://help.sap.com/saphelp_erp60_sp/helpdata/en/a6/df293581dc1f79e10000009b38f889/frameset.htm
Quality Management has eight sub-modules
1) Quality Planning
2) Quality Inspection
3) Quality Control
4) Quality Certification
5) Quality Notification
6) Test Equipment Management
7) Stability Studies
8) Inspection using Multiple Specification
You can go to Productio Lifecycycle Management (PLM) form of SDN.SAP also
or refer
http://erpgenie.com/index.php?option=com_content&task=category&sectionid=5&id=77&Itemid=76
regards,
Chintan

ADD form.php to my site with iWeb, possible?

Hi, is it possible to add a form.php to muy site done with iWeb? thank you.

thank you for your kind reply, the thing is i ignore how to do this by programming php, i use Rapidweaver for the forms and i have them done, getting stuck with adding the forms to my mainsite, done with iWeb, because RapWeav also makes a complete site out of it and i only have one domain with a host that supports php, where the mainsite is located. so what i need is some how achieve to split the php form and upload them, but does'nt this create a duplication of sites on the host?, while i have two index.html, one for the main site i want to link to the forms and one for the RW made site with the forms? wow! thank you for your help, maybe there is no solution if i don't manage with programming php and so.

Cannot print document with added barcode text boxes

G'day
I'm adding two text boxes to an illustrator document with Applescript, but when I go to print, ?I get an error 'Cannot print the illustration. The Color Management settings are inconsistent.'
The error message is not error trappable.
I have to barcode thousands of documents a year, and this is a big deal breaker. Is there any fix, please?
Regards
Brian Christmas
try
set printerName to my theLargePagePrinter as string
set paperOptions to {class:paper options, name:largePaperSize}
set jobOptions to {class:job options, designation:all layers} # , print options:printOptions}
set colorOptions to {class:color management options, profile kind:printer profile}
set flatOpts to {class:flattening options, clip complex regions:true, gradient resolution:360, rasterization resolution:360}
set printOptions to {class:print options, printer name:printerName, paper settings:paperOptions, flattener settings:flatOpts, job settings:jobOptions, color management settings:colorOptions}
try
set p to 17
tell application "System Events" to tell process "Adobe Illustrator"
click menu item "Fit to Artwork Bounds" of menu 1 of menu item "Artboards" of menu 1 of menu bar item "Object" of menu bar 1
end tell
end try
set p to 18
say 7
print document 1 options printOptions
say 8
on error errmsg number errnum
tell application "System Events" to display dialog "Error in printing illustrator document. " & errmsg & " number " & errnum giving up after 40
end try

G'day Owen, & W_J_T.
Unfortunately your suggestions did not work for me.
I've tried using the GUI to access the print dialog box, but as usual with Adobe, they've stuffed that up too. What I did find however, that the print dialog box recognised keystrokes, and always defaults to the Printer box when opening.
Also, the Printer box sets itself to a matching item of whatever key is pressed, and so does the Printer Preset box.
So, even tho I can't select any given box, provided I have a Printer Preset set, I can access it by the following (slower) method...
activate
tell application "System Events" to tell process "Adobe Illustrator"
keystroke "p" using command down
keystroke (character 1 of (my theLargePagePrinter as text)) as text
repeat 17 times
keystroke tab
tell current application to delay 0.1
end repeat
keystroke (character 1 of (my theLargePagePrinter as text)) as text
keystroke return
end tell
Note that if you have more than one printer or Printer Preset starting with the same letter, then you'll have to use more than just the first character of your printer name.
Regards
Brian Christmas

When printing from Preview, the document prints with large print and many lines added and pages added

When printing from Preview, the document prints with large print and many lines added and pages added. Why does this happen?

Thank you!!! That was the problem--scale was set at 200% (don't know why)--when I reduced it to 100% it printed perfectly.
Thanks again for helping me resolve this problem.

Adding a "print" link to a document with iweb?

Similar Messages

Maybe you are looking for