Quality management document with exercise

Hi friends
Any one please send the link Quality management document with exercise
thanks in advance

Refer
http://help.sap.com/saphelp_erp60_sp/helpdata/en/a6/df293581dc1f79e10000009b38f889/frameset.htm
Quality Management has eight sub-modules
1) Quality Planning
2) Quality Inspection
3) Quality Control
4) Quality Certification
5) Quality Notification
6) Test Equipment Management
7) Stability Studies
8) Inspection using Multiple Specification
You can go to Productio Lifecycycle Management (PLM) form of SDN.SAP also
or refer
http://erpgenie.com/index.php?option=com_content&task=category&sectionid=5&id=77&Itemid=76
regards,
Chintan

Similar Messages

"Demo on SAP EWM Quality Management Process with Storage Control" by Ganesan Srinivasan-SAP EWM Consultant -Krypt Inc-a Leading SAP Supply Chain Company USA.

"Demo on SAP EWM Quality Management Process with Storage Control" by Ganesan Srinivasan-SAP EWM Consultant -Krypt Inc-a Leading SAP Supply Chain Company USA.
http://youtu.be/1Tu9c7ecL34

Very Good Demo Navin

Importing/managing documents with DM6

Setting up DM6 was fine and it is syncing organizer and media files fine. I don't have much need for media files, so I don't care that it is easier. My issue is I have been unable to determine how to import and manage documents (xls, doc, pdf) I need. I have looked at every menu and I don't see how to do it. DM5 was awkward at times, but you could work with documents.
Has anyone found how you import documents with DM6? I hope it is something easy I overlooked like a setting change.

Hi and Welcome to the Forums!
IMHO, DTM is the most difficult method by which to manage files on the BB. The only usefulness I find is if I need to transcode media files in order for them to play properly on my BB...otherwise, simply using the USB-drive method in Windows Explorer is the simplest method for managing files. See this article:
http://supportforums.blackberry.com/t5/BlackBerry-Desktop-Software/HOWTO-use-your-blackberry-as-a-US...
While it's a little dated and talks about prior versions of DTM plus some of the on-device menu settings may be in a different place based on your OS, the basic premise is the same...tether via USB and then have, in your PC interface, two additional drive letters representing your Device Memory and your Media Card Memory. Then you simply use Windows Explorer to manage the files just like you would with any other USB drive (e.g., thumb drive, etc.).
Hope that helps!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Manage Document with parent folder with subfolder

Dear All Friends
i want to create document management system where all document manage dynamicaly with Folder -->Subfolder-->Subfolder. There is no restiction to create Subfolder
Like
Parent Folder is A and subfolder are B,C,D,E,F
A-->B--C-->D -->Document 1
Document 2
Document 3
and want to display these folder as an list menu.
How can i do this..
Thnaks

Vedant wrote:
i want to create document management system where all document manage dynamicaly with Folder -->Subfolder-->Subfolder. There is no restiction to create Subfolder
Like
Parent Folder is A and subfolder are B,C,D,E,F
A-->B--C-->D -->Document 1
Document 2
Document 3
Use the XMLDB Repository.
and want to display these folder as an list menu.
Create a dynamic list based on the XMLDB views.

Fetch Details of Transport Management Documents with Document IDs.

Hi,
I have a requirement in which I have to fetch details like Partner IDs, Transportation mode etc. for various TM documents like Freight Order, Forwarding Agreement etc on the basis of their Document IDs.
I could find that Documents are stored as Business Objects in SAP TM system which we can explore with transaction /BOBF/CONF_UI.
Could anyone please help me further with how can I fetch the details for a TM document from Business Objects.
Thanks,
Shalabh

Shalabh ,
The only way to fetch data from BOBF is to dig in a standard way, i can only suggest some code with methods.You can use them as ref. to fetch required data.
This is a sample to get your Freight order root , key is your parent Key.
DATA:
           lt_key               TYPE /bobf/t_frw_key,
          lt_root              TYPE /scmtms/t_tor_root_k,
          lo_srvmgr            TYPE REF TO /bobf/if_tra_service_manager.
CALL METHOD lo_srvmgr->retrieve
         EXPORTING
           iv_node_key = /scmtms/if_tor_c=>sc_node-root
           it_key      = lt_key
         IMPORTING
           et_data     = lt_root.
similarly you can use associations to fetch further nodes from BOBF.
CALL METHOD lo_srvmgr->retrieve_by_association
         EXPORTING
           iv_node_key    = /scmtms/if_tor_c=>sc_node-root
           it_key         = lt_key
           iv_association = /scmtms/if_tor_c=>sc_association-root-stop_first
           iv_fill_data   = abap_true
           iv_edit_mode   = /bobf/if_conf_c=>sc_edit_read_only
         IMPORTING
           et_data        = lt_stop
           et_target_key = lt_stop_key.
Hope this Helps.
Thanks
Sarab.

Sample for Reference and Conformance business event in Quality Manager

Hi All
Can any one please tell me the business event that is to be enabled and the related transaction type to be configured/set for getting a notification when a sample has been taken using SFC / SFR Activity window in Quality Manager responsibility.
Navigation:
Go to Quality Manager
Go to SFC/SFR Activity
Thanks in Advance
Prem.

Hi David
Thanks for your reply.
Click on SFC/SFR Activity Form. It is a Create Immediate Form,in Quality Manager responsibility with name SFC/SFR Activity window. I have enabled and subscribed the event you mentioned before and created approval group in AME.
My requirement is when quality department uses this form they should get a notification as SFC/SFR Sample required.
As of now I am getting notifications as 'Sample Required For (CREI) Inventory Transaction: Item XXX', when other department eg., Stores Dept uses CREI form .
Now I want to Change the Description of the Notifcation to 'Sample Required for SFC/SFR' and to generate a sample notification only when QC has used this form (CREI).
Thanks in advance
Prem.

Integration with Quality Management

Dear Friends,
We want to integrate DMS with Quality Management. We want to attach originals in the transactions Quality Usage Decsion (QA12 ) and Inspection lot (QA03).
I didn't found any objects for these. Is there any standard objects there. How can we bring the tab / screen for attaching / assigning DMS document in above said transactions.
Regards,
Sai Krishna

Hi friends,
Does any one can clear my doubt.
Shall I know the difference between "service for object" (for certain transaction availble on top left corner) and DMS link (thru customization adding Object link ). Sall I know the advantages / disadvantages in both cases.
SAP didn't given DMS link for all certain transactions like QA12 . In that case can we allow the users to use this functionality for certain transactions like QA 12 thru authorization.
When we are using DMS, how to restrict the users not use this.
I do understand that we can create new objects and assign to DMS Doc. types. We can do it thru SE 80 or create new objects, module pools SAPLCV130 and SAPLCV140 and function module OBJECT_CHECK_XXXX (XXXX = object name).
Regards,
Sai Krishna

Licensing Issue Quality Management 9.0 with UCCX 8.5

Hi guys,
The UCCX compatibility matrix, Cisco WFO System config Guide plus QM 9.0 installation guide all state QM9.0 is compatible with UCCX 8.5(SU3).
We have ordered QM9.0 licenses using part number
L-CCX-90-QM-L-K9=:L-CCX-90-QM-L-K9= : CCX 9.0 Quality Manager Server , 10 Seats LICENSE ONLY
I am unable to add these licenses to our UCCX server as I am getting:
Error: The Cisco Unified CCX Quality Manager Seat feature (2nd line) of xxxxx.lic has unsupported version number (9.0)
Has anyone installed QM9.0 with UCCX 8.5 and if so what licenses did you have to purchase?
Thanks!

I have not done this yet, I was looking into getting the license to do same you are doing. Thanks for the heads up. I will wait to see outcome of your attempt.
My main drive to go to 9.x is to get IE9 32 bit support with the latest 9.x SR as I have a handful of supervisors who have Windows 7 and using it to play back recordings, etc and I'm tired of the compatibility issues and time spent on their PCs to keep it running after they do other updates, etc. Was hoping 9.x with the IE9 and 32 bit support would help with those headaches.

Itunes document manager pro will not open a document with .cwk extension. It will catch the document then error message states that it cannot open document. Can anyone tell me what Im doing wrong?

Itunes document manager pro will not open a document with .cwk extension. It will catch the document then error message states that it cannot open document. Can anyone tell me what Im doing wrong?

Forgive my ignorance but I have never hear of iTunes Document Manager Pro. If you mean Document Manager Pro, i was able to find that. Back to your problem, have you tried opening one of those files in the iOS iWorks apps? Form the quick read that I did about this, .cwk files can be opened by Pages, Numbers or Keynote, depending on what type of document that it is and those files can be read by Document Manager Pro, after properly saving them. I don't see that you can go directly from the .cwk file in Document Manager Pro without converting them first.
I took a very quick look at the app, so I may be a missing something about its capability.

UCCX Advanced Quality Management with VMware View

Hi,
I have a customer who uses UCCX 8.5 with VMware View clients running CAD and 7940 IP phones.
They are looking at recording options and have expressed an interest in the Advanced Quality Management product.
There are a few issues that I would need to consider specific to their environment.
The first is that Desktop based recording would not work in this environment as CAD is running on a virtual desktop rather than a PC daisy chained to the IP phone. The second is that network based recording is not supported as the 7940 phones do not have a Built in Bridge.
This leaves server based recording which uses SPAN port mirroring. The issue with this is that the agents phones are distributed across multiple Catalyst switches so I guess I would need to configure RSPAN - has anyone got any experience of using Cisco QM with RSPAN? - if yes how well did it work? - the customer would probably be willing to upgrade the IP phones used by the agents if that would be a better option.
The final query relates to the Screen Recording Client - the install guide details how to install this on a Citrix server but makes n mention of VMware view. Does anyone know if support for this is on the roadmap?
Thanks!

Hi James
I've done an RSPAN deployment with UCCX recording which I presume will have similar gotchas...
The only issue I had was that I ham fisted an RSPAN config in that SPANned the VVLAN on all the edge switches. My mistake was that I didn't exclude the uplink ports, and these switches were stacked, so there was a lot of packet duplication initially (sounds like 90s dance music time stretching).
If you ensure you SPAN ingress only on all the endpoints (i.e. phones, and gateways) and then exclude any ports where traffic might be seen a second time (e.g. switch uplinks), and then filter for the voice VLAN you should be OK.
This deployment was a routed LAN with different subnets on each edge stack but this worked OK with everything running through a single RSPAN session back to the server.
I've not had the good fortune to have to do this more than a couple of times, and I've not done it for AQM - but assuming that SPAN/RSPAN are supported along with the video recording part running on the endpoints I don't see it being too different as they seem to be written by the same people.
Can't help re: VMware view either I'm afraid...
Aaron

Best Practice Document to Configure Quality Management Analytics

Hi Experts,
Can any one help in finding out the best practices document for installing BI content for Quality Management.
Regards,
Santhosh

Hi Reddy,
Thanx for the link but I have a requirement to install the BI content for Quality management to present it to the client. So I need to install as a whole not for a particular requirement.
I want to know do I need to install all the datasources like masterdata and Transactional which are available in RSA5.
Regards,
Santhosh.

Using Content Query webpart for specific Document library with multiple managed metadata - Document with multiple metadata tags not showing up

Hi,
I am having an issue where when I insert a Content Query webpart into a page, and filter to managed metadata, all the right documents show up except one document that happens to have two metadata tags attached to it. The content query webpart is set
to only look through a specific document library. I'm not sure what I am doing wrong.
Here is the one document with two metadata tags:
Below is the Content Query:

Hi,
As I understand, you did not get the results with multiple metadata tags through Content Query web part in SharePoint 2013.
Check things below:
1. Check if you have set the item limit more than the display items in Presentation section of the web part. If the item number more than item limit, the rest items will not show.
2. Check if the item you cannot find uses the content type you have set in the content type section of content query web part.
When you edit the properties of the item, you will see the content type the item is using.
Best regards
Sara Fan
TechNet Community Support

Quality Manager with Contact Center Enterprise (not Express)?

Is Quality Manager (part of the Workforce Optimization package) supported with Contact Center Enterprise? The documentation focuses on Express only.
Thanks,
Tom

You buy QM Enterprise direct from Calabrio, and QM Express from Cisco.

CAD send metadata to Quality Management with chinese string

Hi everybody,
       I'm facing a problem is when I want send a metadata to the Quality Management for a recording, it's failed when the metadata include Chinese string, the error reason is "Tried to read incomplete UTF8 decoded String". And I believe the database of QM is support for Chinese string because I can change the metadata field in the database to Chinese string manually.
       Does anybody know how to send Chinese string to the Quality Management?
       The attachment is screenshot for the error and the result when I change database field into Chinese manually.
       It's really need somebody can help me to resolve this problem.
Best Regards.
Tony.Ye

Hi James
I've done an RSPAN deployment with UCCX recording which I presume will have similar gotchas...
The only issue I had was that I ham fisted an RSPAN config in that SPANned the VVLAN on all the edge switches. My mistake was that I didn't exclude the uplink ports, and these switches were stacked, so there was a lot of packet duplication initially (sounds like 90s dance music time stretching).
If you ensure you SPAN ingress only on all the endpoints (i.e. phones, and gateways) and then exclude any ports where traffic might be seen a second time (e.g. switch uplinks), and then filter for the voice VLAN you should be OK.
This deployment was a routed LAN with different subnets on each edge stack but this worked OK with everything running through a single RSPAN session back to the server.
I've not had the good fortune to have to do this more than a couple of times, and I've not done it for AQM - but assuming that SPAN/RSPAN are supported along with the video recording part running on the endpoints I don't see it being too different as they seem to be written by the same people.
Can't help re: VMware view either I'm afraid...
Aaron

Configure & integrate the quality management with production planning

hi,
i know general flow of production planning ,
i dono how to configure & integrate the quality management with production planning . can anyone explain step by step to configure.
with regards,
Elanchi

Hi,
You must define an inspection type 03 and activate it for materail. When you create production order you will have the inspection lot created. you define type of inspection plan in inspection lot type. You will insert an operation in routing og the material. This operation must contain inspection characteristics. use the operation key QM04 with a quality work center.
Inspection process time will be assigned to your production order.
I think you can manage t customise the process from this global definition of the QM process in Production.
Best Regards,
Salih Arslan
SCM Functional Consultant
Zeitine Solution Partners

Quality management document with exercise

Similar Messages

Maybe you are looking for