Adding a single channel to my service?

I am hoping to get an answer from someone in Verizon. Can I add a single channel to my current lineup. I just switched from Comcast and realize now that I don't get the NHL network. I don't really want the entire sports package for $15. Can you add single channels? Thanks

chrisaster wrote:
I am hoping to get an answer from someone in Verizon. Can I add a single channel to my current lineup. I just switched from Comcast and realize now that I don't get the NHL network. I don't really want the entire sports package for $15. Can you add single channels? Thanks
Answer is no, you have to either upgrade to a higher tier or subscribe to the sports package. You're basically asking for ala carte channels (as walt said), while that is most of us would want, it just is not available.

Similar Messages

Multiple Endpoints Single Channel

I am working on a project, that requires instancing of our
flex application. One idea that I came up with was to allow for
multiple urls to access the same data based on several variables.
One key components for this idea to work is being able to use
multiple endpoints with in the same channel in my
services-config.xml file.
Right now this is what my channel setup looks like.
<channels>
<channel-definition id="cfamf"
class="mx.messaging.channels.AMFChannel">
<endpoint uri="
http://admin.mydomain.com/flex2gateway/"
class="flex.messaging.endpoints.AMFEndpoint"/>
<properties>
<polling-enabled>false</polling-enabled>
<serialization>
<instantiate-types>false</instantiate-types>
</serialization>
</properties>
</channel-definition>
<channel-definition id="cfamf"
class="mx.messaging.channels.AMFChannel">
<endpoint uri="
http://user.mydomain.com/flex2gateway/"
class="flex.messaging.endpoints.AMFEndpoint"/>
<properties>
<polling-enabled>false</polling-enabled>
<serialization>
<instantiate-types>false</instantiate-types>
</serialization>
</properties>
</channel-definition>
</channels>
Ideally I would prefer it to act like this.
<channel-definition id="cfamf"
class="mx.messaging.channels.AMFChannel">
<endpoint uri="
http://admin.mydomain.com/flex2gateway/"
class="flex.messaging.endpoints.AMFEndpoint"/>
<endpoint uri="
http://user.mydomain.com/flex2gateway/"
class="flex.messaging.endpoints.AMFEndpoint"/>
<properties>
<polling-enabled>false</polling-enabled>
<serialization>
<instantiate-types>false</instantiate-types>
</serialization>
</properties>
</channel-definition>
</channels>

one AP will only serve a single channel per spectrum. If you have multiple SSID they can be on the same channel with no issue, so long as you're not running more than 4-5. After that you start to cause issues inside your own network.
If you absolutely had to run them on different channels, you would need multiple AP to accomplish that.
But as I said, you shouldn't need to.
Steve
Sent from Cisco Technical Support iPhone App

Recover a single file in Content Services

I've been asked to document how we would go about recovering a single file in Content Services. The Trash/Archive angle I'm clear on, but what about an extreme case. Lets say that someone created a file, trashed it, emptied the trash, and then it expired from the Archive before the user realized that they needed the file.
Is it possible, and if so how would one go about getting the file back assuming that there is a full db backup once a day?
Would enabling BFILE aging help? If so, how?
On a related note: If archive is set to expire content after 1 month, but BFILE aging is turned off, when does deleted content get purged from the Archive? It's not 1 month, as I have deleted files in the Archive going back to January.

Archive expiration and BFile aging are orthogonal. BFile pushes the LOBs of documents that are in the archive to bfile. Archive expiration deletes files from the archive after the configured time. If this is not the behaviour you are seeing please file a TAR and they can help check whether your system is configured correctly or if you are running into a bug.
regards,
-sancho

Problem with Set/Get volume of input device with single channel

from Symadept <[email protected]>
to Cocoa Developers <[email protected]>,
coreaudio-api <[email protected]>
date Thu, Dec 10, 2009 at 2:45 PM
subject Problem with Set/Get volume of input device with single channel
mailed-by gmail.com
hide details 2:45 PM (2 hours ago)
Hi,
I am trying to Set/Get Volume level of Input device which has only single channel but no master channel, then it fails to retrieve the kAudioDevicePropertyPreferredChannelsForStereo and intermittently kAudioDevicePropertyVolumeScalar for each channel. But this works well for Output device.
So is there any difference in setting/getting the volume of input channels?
I am pasting the downloadable link to sample.
http://www.4shared.com/file/169494513/f53ed27/VolumeManagerTest.html
Thanks in advance.
Regards
Mustafa
Tags: MacOSX, CoreAudio, Objective C.

That works but the the game will not be in full screen, it will have an empty strip at the bottom.
I actually found out what's the problem. I traced the stageWidth and stageHeight during resizing event. I found out that when it first resized, the stage width and height were the size with the notification bar. So when I pass the stage into startling, myStarling = new Starling(Game,stage), the stage is in the wrong size. For some reason, I can only get the correct stage width and height after the third resizing event.
So now I need to restart Starling everytime a resizing event happened. It gives me the right result but I am not sure it is a good idea to do that.
And thanks a lot for your time kglad~I really appriciate your help.

How to do a single channel DAQ using NI-DAQ driver software with a PCI-MIO-16XE-10 card

Hi,
I would like to find out how I could do a simple one channel Data Acquisition from a signal generator using the NI-DAQ driver software with a PCI-MIO-16XE-10 card.
I have written some test problem but even when the signal generator is turned on/off I get back some weird values.
Here is my code.
CString sFunctionName("");
double volt[OUTPUT_POINTS*2];
double out[OUTPUT_POINTS*2];
short timebase, ready, code, stopped;
unsigned short sampleInterval;
int i, status, count=0;
unsigned long update, points;
short* ai_buffer;
short output_ch_vector[16];
int local_ITERATIONS = 2;
SAFEARRAYBOUND bound[1];
double dataItem = 9.9;
long j;
long k;
double* pTheValues;
LPTSTR lpsz_ErrMsg;
// Initialise device
status = Init_DA_Brds (deviceNumber, deviceNumberCode)
Initializes the hardware and software states of a National Instruments
DAQ device to its default state and returns a numeric device code that
corresponds to the type of device initialized
Init_DA_Brds(DEVICE, &code);
// Check return code from Init_DA_Brds
Code return should be 204: PCI-MIO-16XE-10.
if (code < 0)
CString sError;
sError.Format("Code error: %d", code);
if (code == -1)
sError = sError + ": No device found";
LPTSTR lpsz = new TCHAR[sError.GetLength()+1];
_tcscpy(lpsz, sError);
AfxMessageBox(lpsz);
delete lpsz;
return S_FALSE;
// Allocate memory for analog output and input arrays
//ao_buffer = new short[OUTPUT_POINTS*2];
ai_buffer = new short[OUTPUT_POINTS];
// Set double-buffering
status = DAQ_DB_Config (deviceNumber, DBmode)
Enables or disables double-buffered DAQ operations.
status = DAQ_DB_Config(DEVICE, 1);
if (status < 0 )
sFunctionName = "DAQ_DB_Config";
goto TidyUp;
// Get the rate parameters
status = DAQ_Rate (rate, units, timebase, sampleInterval)
Converts a DAQ rate into the timebase and sample-interval
values needed to produce the rate you want.
status = DAQ_Rate(RATE, 0, &timebase, &sampleInterval);
if (status < 0 )
sFunctionName = "DAQ_Rate";
goto TidyUp;
// Setup scan
status = SCAN_Setup (deviceNumber, numChans, chanVector, gainVector)
Initializes circuitry for a scanned data acquisition operation.
Initialization includes storing a table of the channel sequence
and gain setting for each channel to be digitized
status = SCAN_Setup(DEVICE, 1, ai_channels, gain);
if (status < 0 )
sFunctionName = "SCAN_Setup";
goto TidyUp;
status = SCAN_Start (deviceNumber, buffer, count, sampTimebase,
sampInterval, scanTimebase, scanInterval)
Initiates a multiple-channel scanned data acquisition operation,
with or without interval scanning, and stores its input in an array
status = SCAN_Start(DEVICE, ai_buffer, OUTPUT_POINTS, timebase, sampleInterval, timebase, 1000);
if (status < 0 )
sFunctionName = "SCAN_Start";
goto TidyUp;
while(count < local_ITERATIONS)
// Check whether we are ready to input another half-buffer
status = DAQ_DB_HalfReady(DEVICE, &ready, &stopped);
if (status < 0 )
sFunctionName = "DAQ_DB_HalfReady";
goto TidyUp;
if (ready == 1)
status = DAQ_DB_Transfer(DEVICE, ai_buffer, &points, &stopped);
if (status < 0 )
sFunctionName = "DAQ_DB_Transfer";
goto TidyUp;
count++;
// Clear the analog input
status = DAQ_Clear (deviceNumber)
Cancels the current DAQ operation
(both single-channel and multiple-channel scanned) and reinitializes the DAQ circuitry.
status = DAQ_Clear(DEVICE);
if (status < 0 )
sFunctionName = "DAQ_Clear";
goto TidyUp;
status = SCAN_Demux (buffer, count, numChans, numMuxBrds)
Rearranges, or demultiplexes, data acquired by a SCAN operation
into row-major order, that is, each row of the array holding the
data corresponds to a scanned channel
status = SCAN_Demux(ai_buffer, OUTPUT_POINTS * 2, 2, 0);
if (status < 0 )
sFunctionName = "SCAN_Demux";
goto TidyUp;
//Convert binary values to voltages (Doesn't actually take a reading from board)
status = DAQ_VScale (deviceNumber, chan, gain, gainAdjust, offset, count, binArray, voltArray)
Converts the values of an array of acquired binary data and the gain setting for that data
to actual input voltages measured.
status = DAQ_VScale (1, 0, 1, 1.0, 0.0, OUTPUT_POINTS , ai_buffer, volt);
if (status < 0 )
sFunctionName = "DAQ_VScale";
goto TidyUp;

Hello,
Please take a look at lots of examples available at :
1. www.ni.com >> NI Developer Zone >> Development Library >> Measurement Hardware
2. C:\program files\national instruments\ni-daq\examples\visualc
Sincerely,
Sastry V.
Applications Engineer
National Instruments

Currently Unavailable Message for a Single Channel

Has anyone had this issue with a single channel? The new FSC HD (584) that just came out last week worked for 1/2 a day then it started showing Currently Unavailable. I had a technician out a few days later and he checked signal strength, changed all the connections at the splitter on every line and the channel started to show up again. Two days later it went back to Currently Unavailable.   After 2 hours on the phone, an hour tech visit, an hour on online chat, researching all I could, etc. they have no clue what to do and now I have to wait for a technician to come out again in 7 days!!!!!   Gotta love Verizon!
I can't believe that there is no record of another customer having this issue in their tech support databases and someone can tell me something other than unplug the connection and plug it back in.
Solved!
Go to Solution.

The technician changed out all of the connections into and out of the splitter. We also reconnected everything along with way (at the router, to the TVs and from the wall plates, etc.).   It worked fine for a day or two then went out again on all of the TVs. Then this morning the channel is appearing again (without doing anything), but it's just a matter of time until it goes out again.   My question is I could understand a connection issue if it were all of the HD channels, but why on just this one (the newest one released about a week ago, doesn't happen on the previously released HD channel BET).

Problem in adding Custom Provider for Work Management Service

Hello,
I'm facing an issue in adding custom provider for work management service. As you are aware, Work management service is a Provider model and we
can integrate with other systems by adding custom providers. So with that confidence, i have started writing a connector as mentioned below.
Step - 1: Added new provider xml in the below path
"C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\CONFIG\WorkManagementService\Providers"
Provider Name: provider.bizagitasklist
Provider XML Content:
<Provider ProviderKey="DAA52AF3-A147-4086-8C0C-82D2F83A089D" OverrideProviderKey="" Assembly="adidas.TaskProvider, Version=1.0.0.0, Culture=neutral, PublicKeyToken=5d6f3e6be60a351b" > </Provider>
Step -2: Added a class which inherits "IWmaTaskProvider" and implemented the override methods.
public class BizAgiTaskListProvider : IWmaTaskProvider
public string LocalizedProviderName
get { return "BizAgiTaskListProvider"; }
public string ProviderName
get { return "BizAgiTaskListProvider"; }
public Microsoft.Office.Server.WorkManagement.CalloutInfo GetCalloutInfo(IWmaTaskContext context, string taskExternalKey, string locationExternalKey)
return null;
public DashboardExtensionInfo GetDashboardExtensionInfo(IWmaBasicProviderContext context)
return new DashboardExtensionInfo { ClassName = "SP.UI.SharePointExtension" };
public BulkEditResult HandleBulkEdits(IWmaTaskContext context, BulkEdit updates)
return null;
public TaskEditResult HandleTaskEdit(IWmaTaskContext context, BaseAggregatorToProviderTaskUpdate taskUpdate)
return null;
public void RefreshSingleTask(IWmaTaskRefreshContext context, string externalKey)
public void RefreshTasks(IWmaTaskRefreshContext context)
//context.WriteProviderCustomData(
Step – 3: Written a class to fetch the tasks from BizAgi System which has method to provide the task data.
But I’m not able to feed those tasks in the class written in Step – 2 as I’m able to find any method which will take Tasks as Input and I’m not
sure about the format of tasks.
I’m able to debug the provider, and the breakpoint hitting in only one method and two properties.
(LocalizedProviderName, ProviderName, GetDashboardExtensionInfo).
Can you please help me to proceed further in implementing the above solution?
Best Regards
Mahesh

Hi Mahesh,
Although the implementation of work management service application is based on the provider model, I reckon the current SP 2013 RTM does not support custom providers. Only SharePoint task lists, Project server and MS Exchange are supported for now.
Regards,
Yatin

B Channel out of service

Hi,
I am getting B Channel OOS in my event viewer for a gateway in CCM.
Whats the reason for this. How can i rectify this. Can call get disconnected due to this. Please suggest.....
Help required immediately.

Hi,
I am also seeing this issue with CCM 4.1(3)sr1, Windows 2000.2.7sr2. Intermittently there are multiple "Error: BChannelOOS - B channel out of service." (and D channel out of service) errors in Event Viewer for different MGCP gateways (remote and local, 3845 and 3725's). I am going to check the CCM/SDL traces the next time this happens, but if you have any other suggestions or information I would appreciated it.
Thanks,
GG

How to Specify Metadata When Adding Content Using iTunes U Web Service?

I've been developing Java applications using iTunes U Web service and uploaded content to iTunes U site using iTunes U Web service without problem. Now I want to add metadata fields (name, artist name, album name, etc.) for the tracks I uploaded. It seems to me that "AddTrack" will do. So I tested it but it neither adds a track under the specified group nor updates metadata fields for an existing track. It turned out "MergeTrack" actually updates metadata fields for an existing track. So is there any way to specify metadata at the time of adding content using iTunes U Web service? And what exactly does AddTrack do? This is all about contents hosted by iTunes U site and no RSS is involved.
I'm referring to the "AddTrack" method in iTunes U Web service:
http://deimos.apple.com/rsrc/doc/iTunesUAdministrationGuide/iTunesUWebServices/c hapter18_section_21.html#//appleref/doc/uid/AdminGuide-CH13-SW26

Thanks for all the replies. My question is whether there is any way to specify metadata WHEN adding content using iTunes U Web service. Specifying metadata AFTER adding content can be achieved by MergeTrack (weird naming) and it does work.
As for setting track level meta-data in the media file and then upload it, there're several reasons against that, among which are:
1. Some track metadata are context-dependent. A video about buildings on Michigan Ave in Chicago can be track #2 in a history course and described as "historic view of the Magnificent Mile", but the same media can also be track #5 in a landscape design course and described as something like "contemporary architecture". Setting these metadata in the media file itself is not the preferred way to do it since it implies maintaining a version of the same media for any course/group it gets uploaded to.
2. Setting metadata in a location separate from the media file helps track the metadata change and search for media without digging into the media itself.
3. If MergeTrack "updates" metadata, there got to be some other method that "creates" metadata - that's what a well-designed API should look like. And setting metadata in the media file is not an equivalent to a "create metadata" method call. In rickwolf's term, that implicit AddTrack should actually be made explicit so the party uploading content can explicitly specify metadata instead of having iTunes U extract metadata from the media.
It is still not clear what "AddTrack" does exactly, maybe rickwolf is right - it's only relevant to tracks created through RSS.
So it seems to me there is no other way to specify metadata WHEN adding content using iTunes U Web service than setting metadata in the media file. To me it is more like a design flaw.
Message was edited by: Stone Xiang
Message was edited by: Stone Xiang
Message was edited by: Stone Xiang

Similar channel into single channel

Dear All,
Is there any way to merge the multiple similar channel to single channel without flattening layers.
If pantone reflex blue 3 times is there means i need to merge it into single reflex blue channel.
Pls help..
Thank you,
Joe

Yes spot channel only and in Same document itself.
And the above script need to run in Extend tool script?. Coz by this script there is no changes happening.
By using Apply image can merge only two channels at a time. And after merged into a single channel source channel also remains.
For ex, Pantone Reflex Blue 1
Pantone Reflex Blue 2
Now i need to merge into 1. so after Merging by using Apply image
Pantone Reflex Blue 1 2
Pantone Reflex Blue 2 (But this is to be automatically deleted after merging, which is not possible by using Apply image)
By using the script this needs to be recover
1) In channel options
Color indicates - Spot Color
Color - Reflex Blue
Solidity - 0%
In same way i have taken the separation in different area of my image with same spot color.
2) If process color are taken as spot channel that also need to merge with process channel (CMYK)
Color indicates - Spot color
Color - C100%
Solidity - 0%
If this is option selected in this channel to be merge with Cyan process color channel.
By using Apply image option i used to give Multiply only and Opacity to 100%. Same need to apply this script. Pls help..
Thank you,
Joe

Capture single channel in c++

Hi,
I'm trying to write a simple C++ routing (Visual C++) using the NIDSA functions that generates a sine wave and captures the response data.
I can generate a sine wave using NIDSA_configure_source(), but I can't figure out how to get the response data.
I tried calling NIDSA_configure_capture_buffer() and then NIDSA_read_capture_single_chan() but then I get an "Unknown Error" from NIDSA_read_capture_single_chan(). (Error code = 0xffffd5d0)
Sample Code:
rc = NI4551_ConfigureSource(1,0);
// configure capture buffer
rc = NI4551_ConfigureCaptureBuffer(numMeasurements);
// read single channel
rc = NI4551_ReadSingleChannel("0", numMeasurements, pResult);
rc = NI4551_ConfigureSource(0,0);
I don't know if I've got the correct functions to generate the sine wave and capture data or if I'm even calling them in the correct order.
Is there any sample code out there??
Thanks!

Hello,
You have specified a resource descriptor for the source task but when you are calling the capture commands you have not set up an initialize function that tells the program what board to use. For instance try using the NIDSA_init and then use that session to pass to the other function calls such as NIDSA_configure_capture_buffer() etc. I have attached some example code that reads from the board and demonstrates the analog triggering capabilities of the board. I hope this helps. Please let me know if you have any questions after exploring these resources.
Regards,
Shea C
Applications
NI
Attachments:
455x Analog Trigger.zip ‏6 KB

Why do I get this error when running the PID Control-Single Channel.vi: "Requested value is not a supported value for this property."

Error -200077 occurred at Property Node DAQmx Timing (arg 3) in DAQmx Timing (Sample Clock).vi:1->PID Control-Single Channel.vi
Requested value is not a supported value for this property.
Property: SampQuant.SampMode
You Have Requested: Hardware Timed Single Point
You Can Select: Finite Samples, Continuous Samples
Author: Pcorcs
Attachments:
PID Control-Single Channel.vi ‏53 KB

Actually I have already tried a few things you suggested and got as far as the DAQmx Write vi. The error at the DAQmx was a buffer error indicating i needed to set it to 2 instead of the default of 1. Tried using the DAQmx Input and Output Buffer vi to change buffer, with no luck.
Attachments:
PID Control-Single Channel.vi ‏53 KB

How to access single channels of multichannel acquisition?

I want to access single channels of a multichannel acquisition in the Getting Started Analog Input.vi
The purpose of this is to analyse i.e. do Min-Max or FFT on the individual channels. Can somebody help me to unbundle the data? Why does AI Read give Scaled Data while in other vi Waveform data?

Hi,
Getting Started Analog Input.vi uses AIRead.vi to read data from your hardware.
1. This is from the help about AIRead.vi:
"scaled data is a 2D array that contains analog input data in scaled data units. The data appears in columns, where each column contains the data for a single channel."
So to access the single channel you must use "Functions->Array->Index Array.vi" to get data from your 2D array. All you need is to wire your 2D array to this VI and the specified number to the "column" input node.
2. To change the Data type of array you receive from hardware you have to right-click on the AIRead.vi and choose any of 4 options (Binary Array, Scaled and Binary Arrays, Scaled Array, Waveform) from "Select Type" sub-menu.
Good luck.
Oleg Chutko.

Dual and Single Channel Mode

Talking about dual channel and single channel. Is it a theory or is it really a big significant difference in performance between the two? Just curious

Hi Richard,
Thanks for the speedy reply. I'll go tinker around a little more and see what I can do with this board
Benedict.

Is it possible to execute Single Channel read of AI channel too quickly?

When executing single channel read of volts on 16XE50 in VB6 it seems to return an errornous result if too fast. Increase the time between reads and the result is correct. I need to scan single channel quickly for short period to check a trip point and stop some motion. Any clues?

Check the Zout of your signal source. Any stored charge on the amp inputs needs to be bled off trough your source. If it is higher thatn 1kohm, the settling time of the amp is higher than that guaranteed for maximum accuracy.
NI recommends 10kohm or less, with 1kohm for guaranteed accuracy. You may have to buffer the output of your signal.

Adding a single channel to my service?

Similar Messages

Maybe you are looking for