Adding additioanl field to report in KSB1

Hi,
My requirement is to add field BSEG-ZUONR to the report in KSB1. I've apply ossnote 325546 and 359691. But the output is still not coming out. The report is not shoing the column BSEG-ZUONR The sap system has upgraded to release 700. Does anyone know where the problem might be?
Thanks

Dear.
i am facing the same problem..... if you have any solution.. Please let me know.
Thanks in advance.
Riz

Similar Messages

Adding one field in report display-T-Code COIO

Hi All,
         I want to add one field in display o/p.
Current o/p is
Order        MRP PrS Plnt Type    System Status Order quantity        Basic star Basic fin. System Status
100135344    804 001 0003 ZP01    REL PCNF DLV PRC APG APGS APRS BASC*          289.691
+ Items
+Operat./phases
I need to add Bacth no b/w system status and order quantity field.Batch no can have muliple entries.
You can refer from T-Code - COIO .It's hierarichal Report.
            Please let me know how to go ahead.
Rgds,
Raghav

Hi,
   In this report,
1. find out the final table for display.
2. add ur custom fields in that table using appending structure.
3. find out correct enchance spot or BADI,...etc...before diaply(befor calling FM REUSE_GRID_DISPLAY or method SET_TABLE_for_display or..etc).
4. in that enchance spot or badi u can write ur logic.
Regards,
Ramesh.

Adding a field to an sql statement in Oracle Reports error ORA-00933

We have been requested to add a field that already exists in the table referred to by the sql statement in Oracle Reports Builder. The report was set up by a consultant about 3 yrs ago and we don't really have much skill in this area. What is happening when I try to modify the SQL statement, either adding a field or deleting a field to the SELECT statement, causes an error message preventing the statement from being saved. The only way out of the error message is to click Cancel. The error message is
ORA-00933:SQL command not properly ended
ORDER BY Program ==> NAME
Even adding or deleting a space anywhere in the SQL statement causes the error (not adding any new fields). A coworker found that if we comment out the ORDER BY, the statement will accept the new field in the SELECT section, however then we lose the order by functionality. I would like to add one additional field before the FROM. Not sure if any additional data are needed. Thank you.
SELECT p.person_uid PIDM_KEY, p.id_number ID,
               p.full_name_lfmi name,
                p.BIRTH_DATE, p.GENDER Sex,
                Decode(a.residency,'D',p.Primary_ethnicity,'F') Ethn,
                a.academic_period TERM,
                CASE WHEN :p_group_by = 'PROGRAM' THEN a.program
                             ELSE ' '
                END AS Program,
                a.COLLEGE, a.degree, a.major, ' ' rule,
                a.STUDENT_POPULATION,a.STUDENT_LEVEL,    a.application_status Status, a.application_status_date app_sts_dte,
                ad.decision_date1 Last_Dec_Date,
                ad.decision1||' '||ad.decision2||' '|| ad.decision3||' '|| ad.decision4||' '|| ad.decision5 Decisions,
                /* Deposit Date uses the last term entered in :p_term parameter string */
                (SELECT MAX(deposit_effective_date) FROM usf_as_deposit WHERE account_uid = a.person_uid &term_clause group by account_uid)   AS "DEPOSIT DATE",
                ph.phone as PHONE,
                CASE WHEN PS.FIRST_CONTACT IN ('NET','PAP','COM','COP') THEN PS.First_Contact
                 ELSE CASE WHEN ps.latest_contact IN ('NET','PAP','COM','COP') THEN PS.Latest_Contact
                            ELSE ' '
                            END
                END AS FIRST_CONTACT,
                DECODE(:p_address,'Y',REPLACE(adr.street1||' '||adr.street2||' '||adr.street3||' '||adr.city||','||adr.state||' '||adr.nation||' '||adr.zip,' ',' '),' ') as address, adr.nation, adr.state,
                goremal_email_address email, a.residency, a.application_date, p.primary_ethnicity, c.cohort
FROM MST_ADMISSIONS_APPLICATION A,
           MST_PERSON p,mst_pre_student PS, Admissions_Cohort c, usf_v_phone_pr_ma ph,
           MST_admissions_decision_slot AD, usf_v_email, usf_v_address_dr_lr_ma_pr adr
WHERE a.PERSON_UID = p.person_uid
        AND a.curriculum_priority = 1
        AND a.person_uid = ps.person_uid
       AND a.person_uid = ad.person_Uid(+)
       AND a.person_uid = goremal_pidm(+)
       AND a.person_uid = adr.pidm(+)
       AND a.person_uid = ph.pidm(+)
       AND ph.rnum(+) = 1
       AND a.person_uid = c.person_uid(+)
       AND a.academic_period = c.academic_period(+)
&Where_Clause
       /*    TAKE OUT FOLLOWING LINE AFTER DATA IS CLEANED UP */
        AND NOT(p.id_number = '00000000'   OR SUBSTR(p.id_number,1,1) = 'B' OR UPPER(p.full_name_lfmi) LIKE '%TESTING%')
       AND a.application_status_date >= NVL(:p_as_of_date,sysdate-8000)
       AND a.academic_period = ad.academic_period(+)
        AND a.application_number = ad.application_number(+)
        AND a.degree <> 'ND'    /*   AND a.college <> 'LW'                         -- Does not need non-degree and law students    */
       &Cohort_Clause
ORDER BY Program &ORDER_CLAUSE

Hi Denis,
I tried your suggestion. The good thing is that adding the comma allowed me to be able to add a.campus to the select statement, unfortunately, another error message happened.
ORA-00936: missing expression SELECT p . person_uid PIDM_KEY ,
p . id_number , p . full_name_lfmi name , p . BIRTH_DATE , p . GENDER Sex ,
Decode ( a . residency , 'D' , p . Primary_Ethnicity , 'F' ) Ethn , a . academic_period TERM ,
CASE WHEN : P_group_by = 'PROGRAM THEN a I started over and tried only putting in the comma and get the same message even though I didn't add campus. After that, removed the comma which led to the ORA-00933 error message. So once again, I had to close the file without saving, in order for the report to run at all.

S_ALR_87012357 (RFUMSV00): Adding field to report

Hi
How can i add field Name1 on the output list Layout on the report. At the moment only Name2,Name3 and Name4 are on the layout selection.
How can i configure it to add the Vendor description(Name1)?
Transaction code : S_ALR_87012357 - Advance Return for Tax on Sales/Purchases

hi Giovanni Baumann .,
will u please tell me how u added NAME1 field to on the output list Layout on the report . please guide me on this.
Regards.,
S.Sivakumar

Adding custom fields to standard Asset Accounting ALV reports

Hello,
I have recently added some fields to the Asset Master table ANLU using the customizing include CI_ANLU. I have also added some fields using an append structure to ANLZ. I now need to have these fields available in the standard reports for Asset Accounting. One example is the report generated for transaction S_ALR_87011963. I need the new fields available in the 'Displayed Columns' list when clicking the Change Layout icon. Any suggestions?
Thanks,
JR

Hi Vignesh,
Adding new fields is not possible, but custom subscreens can be added.
Check enhancements QQMA0001 (subscreen for notification header) and QQMA0008 (subscreen for additional data).
It might help you.
Thanks & Regards,
Swati

Adding Additional field "Supplier name" & "Supplier No" in MB5B Report?

Can i add the above stated two additional fields in the standard report of MB5b, is there any implicit enhancement in the standard report which can help achieve my objective?

Hi,
The possibility to include additional fields in the report MB5B is
limited to MSEG, just as you can see in the text of the
report RM07MLBD_CUST_FIELDS itself:
This include contains the structure for additional fields for report
RM07MLBD ( transaction MB5B )
the following fields are not shown in the list of report
RM07MLBD
If you want to insert some of these fields in the list of the
hidden fields delete the '*' in the type definition.
>>* There are only fields from database table MSEG possible <<<<<<<<<<<
Please use only the following fields, because these fields
are considered during the creation of the field catalog;
plaese consider, that each active field will cost performance
If you need to add aditional information from other tables, like the
Reference Document Number you will need to build your own query.
Regards,
Mauro

Adding new field(material Desc) in pricing report.

Hi Experts!
I want to add material decsription in Pricing report,Report name 28.Is it possible to add this field in report 28.Else i want to create new report as like report28 additionaly which includes material description.But my problem is i didnt find any field for material description when creting a report.How to add new field?Can anyone pl help me in this issue?
Thanks in advance.

Hi viswanth,
Thanks for ur reply.I am not creating any z-report.I am creating new pricing report through t.code v/la.In that they have provided some tables and its fields to create a trerport. I didnt find fied respect to material description.I want to know how to add makt table there?.Is it possible to add new ?
Edited by: Ranganayahi Chandirasekaran on Nov 26, 2008 9:46 AM

Adding Summary Fields

Good Morning Everyone,
We would like to add summary Fields.
1)
Double click on the Data Model icon on the Object Navigator
Click on the Summary Column tool on the Data Model Editor's left hand toolbar
Double Click on CS_1
and so on
2)use SUM at Report Wizard :
After researches, we founded Creating summary / formula columns in data model does not show them in paper layout. We learnt the report wizard, and choose to display the summary / formula column in one of the steps.
Following Report Wizard and will see SUM option;
http://nycapex.webs.com/apps/photos/photo?photoid=95360469
We have hard time in both ways.
If you have experience in Adding Summary Fields, please share with us.
Thank in advance,
NY
Edited by: New Yorker on Aug 17, 2010 7:44 AM

Your screen shot shows that you have nothing selected as a summary. So, there is nothing to display in the layout. What is your exact problem? The available fields don't look like you can SUM them, so the option is not available.
we founded Creating summary / formula columns in data model does not show them in paper layoutIf you add them later on, you can manually add them in the layout.
Edited by: InoL on Aug 18, 2010 1:53 PM

Adding custom fields to the condition table in CRM

Hi all,
Our requirement is to download the sales conditions type from R3 to the CRM system. In one of the condition table we are trying to add shipping point( VSART ) and Special processing indicator (SDABW).
For that we have added the fields in the structure CND_MAPT_ACS_REM_CUST (Comm. Structure Condition Exchange Customer Exit R/3 Fields) and we have added the fields in the field catelog in transaction ( /SAPCND/CTCT - Maintain Condition Tables). Then we have mapped these fields in the view V_CND_MAP_CNVFLD.
Finally we run the adapter object of that particular table to download the details from R3, but the condition table in CRM is not getting activated, so the adapter object is giving the error.
Please help in this.
Thanks & Regards,
Raghuram.

Hello Raghuram,
I feel that your issue is similar what i have faced, refer to my post:
Link: [Issue in customer specific price;
For solving this you can refer to detailed steps in, Note 514952 - Download of customer-specific tables.
Also additionaly you may need to run the report /sapcnd/rv12n001, as i also had to do so.
If not solved then let me know the relevant message in SLG1
Regards

Adding new field in Sales order

Hi frnds,
i need to add a field (LIFNR) in item level of sales order. can any body tell me thru which screen exist i can add the field? i hope i need to add the field in VBAP first then i need to go the screen.
actually i have done the similar in PO. in that i found one screen exist and in include tables i have added the field, but in SO i am not able to find the screen exist as well as include tables.
points will be rewarded for help ful answers.
thanks in advance.
regards,
Balu

Reddy,
You can make use the belowsaid code for identifying user exits pertaining to any transaction.
Source Code to find User Exits 1
* REPORT YSMOD2
* SELECTION TEXTS : INPUT1 ----> Enter search term for Trxn.
*                   INPUT2 ----> Enter type of exit
REPORT YSMOD2 .
TABLES: MODSAP, MODACT, TSTC.
PARAMETERS: INPUT1 LIKE TSTC-TCODE DEFAULT ' ',
            INPUT2 LIKE MODSAP-TYP DEFAULT ' '.
DATA: SEARCH1(6),
      SEARCH2(3),
      SEARCH3 LIKE MODSAP-MEMBER.
DATA : FIRST_ROW VALUE 'Y'.
CONCATENATE: '%' INPUT1 '%' INTO SEARCH1,
             '%' INPUT2     INTO SEARCH2.
SELECT * FROM TSTC WHERE TCODE LIKE SEARCH1.
FIRST_ROW = 'Y'.
CHECK TSTC-PGMNA NE SPACE.
CONCATENATE '%' TSTC-PGMNA '%' INTO SEARCH3.
SELECT * FROM MODSAP WHERE TYP LIKE SEARCH2
                       AND MEMBER LIKE SEARCH3.
    SELECT SINGLE * FROM MODACT WHERE MEMBER = MODSAP-NAME.
    IF FIRST_ROW EQ 'Y'.
      WRITE: /0 TSTC-TCODE, 6 TSTC-PGMNA, 16 MODSAP-NAME, 32 MODSAP-TYP,
                                       45 MODSAP-MEMBER, 70 MODACT-NAME.
      FIRST_ROW = 'N'.
    ELSE.
WRITE: /16 MODSAP-NAME, 32 MODSAP-TYP, 45 MODSAP-MEMBER, 70 MODACT-NAME.
    ENDIF.
    CLEAR : MODSAP, MODACT.
ENDSELECT.
IF SY-SUBRC NE 0.
    WRITE : /0 TSTC-TCODE, 6 TSTC-PGMNA, 30 'No exits found'.
ENDIF.
CLEAR TSTC.
ENDSELECT.
END-OF-SELECTION.
CLEAR: SEARCH1, SEARCH2, SEARCH3.
Regards

Adding new fields in the layout.

Hi gurus,
I have a requirement in which i need to change the layout of a report v.25 through transaction VOKF. Actually i have added one field VDATU in the table VBMTV and the fields of this table are getting displayed in the output but not all fields. so through the transaction VOKF a variant has been created with some fields and there is also option for additional fields addition. But the field which I have added new through append structure doesnt appear in the possible value fields.
So do anyone have any solution for this or if anyone has ever encountered this type of issue.
Thanks in advance.

I have added the field VDATU in the Structure VBMTV and the structure is active. This field is getting filled in the my Standard report and and is displayed only when change the layout after displaying the output.My requirement i need this field by default in the output.
Thanks in advance.

Add Custom fields in Report Incident Screen in EHSM

Hello experts,
I want to add custom fields like Notification No. and division in Report Incident screen in EHSM.
I have added two fields.
Business Object: EHHSS_INCIDENT
Node: BASIC_INFO_ALL
Structure: INCL_EEW_EHHSS_INC_BINFA_D (added two fields using append structure)
Now how can i link with my screen and how to fetch notification data (standard F4 help)?
and when i save data, where it will save?
Can you guide me with proper steps for it as i am new in it.
Thanks in advance.

Hi Jayvin,
To add the above fields on the screen, open the component configuration of the required screen.
Enhance the same and add the fields from the respective Node.
You did not worry about saving the data, once the fields are placed on the screen it will get save on click of save/ on event of save.
Regards,
Sanket.

How to add new fields in report painter without library

Hi,.
I have to add new fields in report painter(std one) which is not in any library and so I am not able to add the fields in characteristics. Though I have added zfields in CCR1S but I am not able to add these fileds in characteristics in report painter(say - CJe3 t-code)
How to procedd for this.
Thanks,
MOhan

hi,
first i copied the report 12KST1G in my Y12KST1G with form. In CJE2 when i Click this report then in the whatever fields coming in the characteristics we can put it in 'variables' tab and these will be the fields which is displayed on the selecton screen. So after doing the wbove changes in the exit , I am not able to get the fields in characteristics vale so that I can put it in variable. or do we have to do some chnages in the screen for this z report which is like std. one.
FYI..The display of the fields was done in z-report with library but this is like a report without library and we did some chnages in the exit.
Pls Suggest

Custom fields in Report painter in CCSS table

Hello Experts,
I am in a processes of developing a report painter with custom fields in the selection screen.
The custom fields are available in PRPS table.
With hard difficulties I brought the custom fields in selection screen of the report painter.
I have added the fields in the structure CI_CC1S
Everything is fine. But if I enter a value in the custom field, the report is not fetching any data.
These custom fields are related to the WBS element.
For example if the value of the CUSTOM field is 'AAA', then I want to retrieve ony the WBS element which has 'AAA'.
Somewhere I am missing a procedure.
Could anyone suggest how to achieve this.
Thanks !!!
Best Regards,
Vasanth M

Any Suggestions

Add field in report Z_ALR_87011963

hi everybody
I have to add a field on the selection screen of report Z_ALR_87011963, the field anlz-pernr
I have made a copy of RABEST_ALV01 but I cant detect where the selection screen is getting populated
I have added the field in structure CI_REPRAZUGA but apparently this structure i used for output
does anybody know how to add a field on the selection screen
thanks for your help

Hi,
While copying the standard code
check all the check boxes in the first screen.
In the next screen copy all the standard includes to Z includes.
RASORT14
RASORT_ALV04
RASORT_ALV08
RASORT_ALV10
RASORT_ALV_DATA_FIELDCAT
RASORT_ALV_MISC
RASORT_ALV_PREPARE_TABLE
RASORT_ALV_TOOLS
ZRASORT14
ZRASORT_ALV04
ZRASORT_ALV08
ZRASORT_ALV10
ZRASORT_ALV_DATA_FIELDCAT
ZRASORT_ALV_MISC
ZRASORT_ALV_PREPARE_TABLE
ZRASORT_ALV_TOOLS
Now the complete prog is with you.
In the starting lines of prog the selection screen design is done you can add the required field there.
I think this will solve your problem.
Reward points if it is helpful......
Kruthik

Adding additioanl field to report in KSB1

Similar Messages

Maybe you are looking for