Adding additional FX0 ports on uc540 via gateways

Hi,
Our sales rep has sold a UC540W-BRI-K9 to a customer but the customer doesn't have any BRI connections, they use PSTN lines.
The issue is that they have 7 PSTN lines. We can purchase a 4 port FXO interface card but it's not enough to connect all the PSTN lines because the UC540 has only one expansion port..
I guess the only option is to purchase a gateway device to allow the additional FXO.
My question is, which media Gateway is supported on the UC540 via CCA programming?
I know that SPA8800 is supported on the UC540 with the new software pack but it's only for the FXS ports.
Are there any other devices?
Regards
Raymond

Hi,
I am looking for possible solutions for adding an additional FXO line to a UC540 as well. Mine already has the additional VIC2-4FXO module and all FXO ports are used. From reading the Manuals, Release Notes, and Forums, it sounds like the 8800 will only support additional FXS ports. I have not found a solid answer as to why that is. It seems like it would be a hardware/platform overload issue for the UC540 to support more than 8 FXO lines. Is this assumption accurate or is there something we can do about it?

Similar Messages

Adding additional firewire ports?

Does anybody know if you can additional firewire ports to my macbook pro?
Thanks,
kidboy

Macbook pro should have 1 firewire 400 (1394a) and 1 firewire 800 (1394b) so you can just get a cable that goes 800to400 and use that 1394b jack. Or you can get an external hard drive box that has a second firewire port on it to pass through to another device. Failing that, get a firewire hub and poof lots of ports.
And yes, daisy chain.
Useful FAQ? http://docs.info.apple.com/article.html?artnum=60985

How to manage port 80 hosts via gateway - gateway vpn (rv220w)

I replace our aging rv082 routers with wireless rv220w routers. The gateway to gateway vpn works great, however I am no longer able to manage our print servers port 80 management page. I can ping any host with success, and I can manage hosts that have a port 10000 or 8000 web interface - but no port 80 ones... I had no issues when using the old rv082 routers...

I replace our aging rv082 routers with wireless rv220w routers. The gateway to gateway vpn works great, however I am no longer able to manage our print servers port 80 management page. I can ping any host with success, and I can manage hosts that have a port 10000 or 8000 web interface - but no port 80 ones... I had no issues when using the old rv082 routers...

Optimum settings for FX0 ports in UK on BT Analogue lines - UC540

Hi Guys
We are installing a UC540 and have trouble getting the precise settings required for connecting BT lines to the FX0 ports. It seesm to be a complete mystery. Can anyone provide any guidance as we are getting call dropout and complaints that occasionally outbound call volumes are extremely quiet.
Any assistance would be welcome

voice-port x/y
cptone GB
That is all what is needed. Further problems must be analyzed by an expert, eg UC certified cisco partner.

Flex compilation error after adding an additional output port to a query

Hello,
I need to add an additional output port to a query in order to dynamically filter some results. Our version of VC 7.0 (SP16) doesn't support filter components with access to store data.
Just when we add an extra output port to the query and deploy it we run into a flex compilation error.
Has somebody come along with that?
Kind regards
Stefan

Hi
Why exactly you want another output port. With same output port you can drag multiple filters & restrict the output.
Creation of second output port is not required.
If first way is not suitable in your case, then you add that query twice (or multiple times) & pass the same input parameters.
If still it is not serving the purpose then please elaborate your requirement as what dynamic filter you want.
Regards
Sandeep

Adding additional j2ee node

Hello,
we are running BI 7 - abap+java stacks with 16 GB ram (recently added)
i would like to know what is the thumb rule for adding additional j2ee node?
when is it neccassary to add additional j2ee node?
Regards,
Moshe

Hi,
The JLaunch starts a Java program. It loads the JVM into its own address space and then represents the required cluster element. The program can receive notification from the JControl process via named pipes to stop the cluster element, and terminates, if the JControl stops running (fork emulation under Windows).
So Jlaunch consuming high CPU time means that server, dispatcher or bootstrap process consume it. If there are not enough system or application threads avaliable means that the engine must buffering requests for web application or system processes. Things to check in this case are:
SAP NOTE 1016241 - J2EE Engine hangs because of unsufficient system threads
SAP note: 716604 and upgrade JDK.
SAP note: 723909 -> set correct VM parameters
and if issue persists, then you will need to analyse the application causing teh leak...
SAP note: 1259465: Memory analyser.
Regards,
Hemanth

Added additional user. How do I configure password for this user?

Have two different accounts. Second accound added but don't understand how to cinfigure password for this account.

A bit confused by your query, so can you clarify a few points.
re: added additional user
You do not add additional users to Thunderbird, so I presume you mean you have tried to create another mail account for someone else in your own profile.
You do not configure passwords for other peoples email addresses as that would be a privacy issue and only they should do it.
Lets start at the begining.
If more than one person is using a computer, they should have their own User Account which they access via a password they choose. This gives them their own desktop view and access to programs installed on computer, such as Thunderbird.
Thunderbird will be available for them to use.
When you run it for the first time in their User Account, it will create a Profile in their User Account.
Thunderbird will also then ask you to create a mail account in that Profile.
The details you enter will ask for Name. email address and a password.
That password is the same password they use to access their email in their webmail account using a browser, so only they should know that password and they should not divulge it to anyone - however in some cases, eg: spouses, they may know each others password.
You can choose whether Thunderbird remembers the password or not before creating the account, but the password would still be required to configure the mail account.
This method means that no one can see that persons emails nor access their password details because they do not know the password to the computer User Account.
If you have only the one admin User Account which several people use, then anyone has access to anything on that computer. This may be fine if eg; spouses share the computer, but it is not a practise that should be used in any other environment.
If you have mail accounts created in the same Thunderbird profile, then all mail and passwords are freely available for anyone to see and this may not be desired.
Some people use only the one User Account, but they have their own Profile created in Thunderbird.
When Thunderbird was initially run, it created a defult Profile, but you can add additional Profiles using the Profile Manager.
The mail account is created in that Profile and then they can apply a Master Password in Thunderbird.
This means that anyone can still see anyone's emails as on startup as anyone can select any Profile.
But, the access to passwords is locked and removal of Master Password will remove all stored paswords to safe guard privacy.
Some info on Master Passwords:
* http://kb.mozillazine.org/Master_password
Some info on creating additional Profiles using Profile Manager:
* http://kb.mozillazine.org/Profile_Manager

Add additional ethernet ports with airport express

Is there a way to add an additional ethernet port to an airport express via a router or some other option? I have a need for two devices using ethernet next to the airport express.
Thanks,
Guy Gadois

If you want the AX to connect wirelessly to a network and then connect Ethernet clients to the AX's Ethernet port, read Tesserax's post above. This requires WDS.
If you want to connect the AX to an Internet source and also have Ethernet clients you want to connect to that Internet source, read my post above. This is not possible using only the AX. You need a router with 2 or more Ethernet ports unfortunatley the AX only has one.

Hi Guys, I am using the full width video widget on a site. The widget was working perfectly however I have just added additional content to the site and re-uploaded and now the video is not working! Please help I have tried everything and am freaking out

Hi Guys,
I am using the full width video widget on a site. The widget was working perfectly however I have just added additional content to the site and re-uploaded and now the video is not working! Please help I have tried everything and am freaking out as this web-site has been payed for by my client.
Alex

Many thanks.
With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

11gR2 mappings to SQLServer via gateway

Hi all,
we are evaluating the dataloading from SQLServer 2005 either via code template or via gateway (both cost a fortune in licences). The code template runs well but I don't know how to pass a dynamic filter criterion (e.g. a date) derived from the Oracle database. So there is a preference for the gateway but when validating a traditional mapping with a source table from a gateway module I'm getting the following message:
VLD-1151: Operator CALLDETAIL is bound to an object contained in native heterogeneous module SQLSERVER_LOCATION.
The detailed explanation (unfortunately it's not possible to copy it here) says that Oracle objects cannot directly access objects residing in native HS modules. I should use a template mapping. What does this mean? Does OWB enforce the use of code templates although there is a more efficient way which worked well until now? Or do I miss a configuration step?
I need a simple "insert into <locale table> select ... from <sqlserver table>@<gateway DB link>". How to achieve this via OWB.
regards
Thomas

Hi David,
the source tables are stored in a module under the Database/SQL-Server node which can have a location either of type "Native Database Connection" or "SQL Server Gateway". I created both types in order to test the CT implementation with the native location and the gateway implementation with the gateway location. Both cannot be accessed by Oracle. But the native location works for the CT implementation. But when using the tables from the gateway location (with whichever LCT) I get on validation:
VLD-1339: The source location of execution unit SQL_SERVER_GATEWAY_LOC_EU cannot be determined.
The source operator(s) in this execution unit may not have a valid location (such as a constant operator), or the source operator(s) are not bound to location(s) that can be accessed using JDBC (such as a table operator bound to a SAP system).
What do you mean with "+if you are building a traditional mapping that uses gateways, the module must be Oracle accessed/typed (Oracle or Oracle Database Gateway+"? This is an insolvable requirement for the source module as I described below.
1. We don't want to use a CT mapping for a gateway access. My client want to pay just one of the expensive licenses. And it worked in former releases without CT.
2. Effectively, I don't get it running neither in the traditional mapping nor in the CT mapping.
3. I want an ordinary INSERT statement generated. If OWB cannot do the job I must workaround it with a hardcoded procedure. It seems that OWB wants to force the users to implement CT's where it wasn't necessary until now.
some more ideas?
best regards
Thomas

HT1844 Library Issue: I just imported 2 CD's into ITunes. They show up in "Recently Added" and on my other devices via ITunes Match, but NOT in the ITunes software on the computer where I added them.

Library Issue: I just imported 2 CD's into ITunes. They show up in "Recently Added" and on my other devices via ITunes Match, but NOT in the ITunes software on the computer where I added them. They show up in the search box, but when I click on the results it just kicks me to ALL my music. I have imported thousands of songs/CD's before and this is a new one.

Something may have gone wrong with the index of the Music playlist. Making another change to the library such as downloading the current iTunes Free Single of the Week, or deleting one track from your library and reimporting it, should fix the problem.
If that doesn't work close iTunes and delete the hidden file sentinel from inside the main iTunes folder, then start iTunes again. It should run a consistency check when it starts up which ought to correct things.
tt2

Adding Additional Columns in LOV,That column capturing values from function

My requirement:
Adding Additional Columns in LOV,That column values capturing values returned by function.....
Give me the ides to achieve this...

Hi Subramaniam,
If your requirement is to call a Database function then please make use of the below code ,
import java.sql.CallableStatement;
import java.sql.SQLException;
import oracle.apps.fnd.framework.server.OADBTransactionImpl;
OAApplicationModule oaapplicationmodule = oapagecontext.getApplicationModule(oawebbean);
OADBTransactionImpl txn = (OADBTransactionImpl)oaapplicationmodule.getOADBTransaction();
CallableStatement cs = txn.createCallableStatement ("begin :1 := xxpackageName.xxfunctionname(:2,:3); end;",-1);//Replace your function Name
try
cs.registerOutParameter(1, Types.VARCHAR);
cs.setString(2,InputParam1); // InputParam1 is the name of variable captured from the OAF page and passed into function as input parameter
cs.setString(3,InputParam2); //InputParam2 is the name of variable captured from the OAF page and passed into function as input parameter
String outParamValue = null; // outParamValue will capture the value returned by function .
cs.execute();
outParamValue = cs.getString(1);
catch(SQLException sqle)
throw new RuntimeException(sqle);
finally
cs.close();
Let me know if its not clear .
Keerthi
Edited by: keerthioaf on Nov 23, 2012 5:17 AM

FBL5N : Adding additional field PERNR to layout

Hi experts,
I had added additional field PERNR - personnel number in FBL5N layout for displaying in output.
I had added pernr- personnel number by following the path
SPRO -> Financial accounting ( new ) -> accounts receivable and accounts payable-> customer accounts ->line items -> display line items -> define additional fields for line item dispaly
here i added bseg - pernr
after adding , in FBL5N layout the field is appearing , but it is displaying blank in output .
Is there any thing needs to be done to display additional field in output of FBL5N.
kindly give me any suggestions.
thanks & tregards,
Raghul
Edited by: Raghul Gandhi on Mar 23, 2010 9:30 AM

Hi,
FBL5N: customer line item display.
BSEG-PERNR: personnel number.
Under which circumstances should BSEG-PERNR contain a value if you create customer related postings?
If there is no personnel number given during posting (why should it?) the field added to the FBL5N-layout will be empty.
Best regards, Christian

Adding additional tables to the extractor configuration

Hi Experts,
Can you please help me adding additional tables to the SAP extractor and to configure the field data in the orgstructure to show a flag against the position.
Luke - I have tried using the option said by you from Application-wide Settings-->Data Centre --> Read SAP Table, it has properly save the added table, but not able to see it from SAP extractor configruation and not able to extract any data. Also, can you please guide me how to use the fields from this table (HRP1010) to write a small piece of logic to show a flag for a particualr position based on data.
Thanks in advance,
Purandhar

Hi Purandhar,
I have tried using the option said by you from Application-wide Settings-->Data Centre
--> Read SAP Table, it has properly save the added table, but not able to see it from
SAP extractor configruation and not able to extract any data.
This has probably added a data element - I would check in the dataelementconfiguration folder in your build's .delta folder. IF so then you have the first step completed. Now you need to add the necessary configurations to use the data that comes through this data element.
Go to your orgchart/hierarchy and navigate to Views. Here select your view (or your first view if this needs to be done for more than one view - if so you'll need to repeate these steps but not the step you already did in the Data Centre), and then click the + icon next to Design Details. Here you can add a new linked detail to your view detail. Simply give it a name, select the detail to link it to (usually the top level detail which is in blue), select a link field and then select your data element that was created in the Data Centre.
Now if you try to add a section to your view inside the Design Details view designer you will see your new detail added. You can then select it and add fields from this detail.
Also, can you please guide me how to use the fields from this table (HRP1010) to write
a small piece of logic to show a flag for a particualr position based on data.
Once you have been able to add the data in the views designer you will probably need to do some XML and XSL editing because you cannot edit XSL files in the AdminConsole and you will need to do this to get your icon/flag to show.
First of all you need to create a new XSL file and put it into a folder in your .delta\root folder. For example, My_XSL_files. Here you need to write the code to render your flag based on your variable. You can find plenty of examples in all of the pre-existing XSL files. Then you need to copy PresentationResources.xml to .delta\root\XML and add the reference to your new XSL file.
Go to your build's .delta folder and go to detailconfiguration. Find the detail you just created and open it. You'll find a section in their that you just added with a reference to an XSL file (e.g. if you added a Simple Caption section it will probably be something like SimpleCaptionXSL). Change this to the reference in the PresentationResources.xml.
Load your build in the AdminConsole and hit Publish. Once done you should see your icon. Sometimes if your XSL is invalid or the code doesn't work you won't see anything. This is not unusual as the whole process can be quite tricky - even for us with lots of experience!
Good luck!
Luke

Adding additional sld

Hello,
we have 1 sld - configured on the portal dev -
i would like to add additional sld - configure it on the portal production - all the production systems will be added to this sld, and all the qa and dev systems will remain on the sld opn the portal dev
what are the specific pahses in adding additional sld , updating it if neccasary, and moving the relevent systems
Regards,
Moshe

Hi
The task could be done like this:
1) Activate the SLD in the EP prod and configure post-processing accord. to SLD guide
2) Ensure that the DEV-SLD and new PRD-SLD has the same CIM model version and SAP_CR version
3) Export the content from DEV-SLD (export line ALL)
4) Import this export into PRD-SLD
5) Configure all production systems "SLD data provider" to send technical data to PRD-SLD
6) Configure all production systems "SLD client role" to work with PRD-SLD
...now the DEV-SLD will only get technical data from the non-productions systems. If you want both SLD's to have a full view of alle systems then ALL systems could use PRD-SLD as target for their data suppliers and a sync from PRD-SLD to DEV-SLD can be set up... You maybe also need to supplement this strategy with manuel export/import of SLD content.
BR
Tom Bo

Adding additional FX0 ports on uc540 via gateways

Similar Messages

Maybe you are looking for