FBL5N : Adding additional field PERNR  to layout

Hi experts,
I had added additional field PERNR - personnel number in FBL5N layout for displaying in output.
I had added pernr- personnel number by following the path
SPRO -> Financial accounting ( new ) -> accounts receivable and accounts payable-> customer accounts ->line items -> display line items -> define additional fields for line item dispaly
here i added bseg - pernr
after adding , in FBL5N layout the field is appearing , but it is displaying blank in output  .
Is there any thing needs to be done to display additional field in output of FBL5N.
kindly give me any suggestions.
thanks & tregards,
Raghul
Edited by: Raghul Gandhi on Mar 23, 2010 9:30 AM

Hi,
FBL5N: customer line item display.
BSEG-PERNR: personnel number.
Under which circumstances should BSEG-PERNR contain a value if you create customer related postings?
If there is no personnel number given during posting (why should it?)  the field added to the FBL5N-layout will be empty.
Best regards, Christian

Similar Messages

  • Adding additional field (po number) in FBL5N standard report

    Hiya Gurus,
                     I have got a requirement to create a custom report similiar to that of FBL5N standard report with and addition of PO number for every line item of the report and customer address at the header level.
                   I wanted to know where and how can i add these two fields in the custom program, as i am new to abap the standard code is a bit nerve cracking for me!!!  Kindly guide me how to change the standard program.
                 Your guidence and advice would be of great help for me.
    Thanking you,
    ZIa

    Hi,
    Please Have a look at the following Thread hope you will fine the Answer.
    [ add fields fbl5n|add fields fbl5n]
    [Regarding a field addition in FBL1N, FBL5N|Re: Regarding a field addition in FBL1N, FBL5N]
    [ how to add new field to fbl5n|how to add new field to fbl5n...]
    Kind Regards,
    Faisal

  • Adding new fields in the layout.

    Hi gurus,
    I have a requirement in which i need to change the layout of a report v.25 through transaction VOKF. Actually i have added one field VDATU in the table VBMTV and the fields of this table are getting displayed in the output but not all fields. so through the transaction VOKF a variant has been created with some fields and there is also option for additional fields addition. But the field which I have added new through append structure doesnt appear in the possible value fields.
    So do anyone have any solution for this or if anyone has ever encountered this type of issue.
    Thanks in advance.

    I have added the field VDATU in the Structure VBMTV and the structure is active. This field is getting filled in the my Standard report and and is displayed only when change the layout after displaying the output.My requirement i need this field by default in the output.
    Thanks in advance.

  • Additional field in report layout

    Dear Experts,
    In t code me2j (ALV format) there comes option change layout. when we click on this, we found displayed column and hidden column. if i want add one  extra column in hidden column. how can I Add this. this extra column is related to report that my client want.
    please suggest me step by step...
    its urgent
    thanks in advance
    Lallan

    Hi
    Following are the settings you need to do for adding the field in the report layout
    1. Select Settings-> Layout -> Changes
    2. you will be able to see 1. displayed Columns and 2. Column Set
    3. If you want to display some column from the column set, select the field and press show selected fields arrow or viceversa
    I hope this clarifies your doubt
    thanks and regards
    ramesh

  • Adding additional fields to an Infoset Query

    Hi Experts,
    I have added a couple of additional fields to an infoset query using SQ02.
    I have also written code for filling in the fields.
    I have also added them to some Field Groups.
    Despite this, when I run the query, they are not being displayed in the output list.
    What could be the reason for this?
    Kindly help with your inputs.
    Thanks in advance.
    Regards,
    Keerthi

    goto sq01,
    give the query name...
    goto change.. just below output, you have a drop down for field group and field catalog. select field catalog.
    select the fields you want to show in output

  • Adding additional field 1 to selection screen of CATSSHOW (CADO)

    Hello all,
      We recently added one of the additional field's to show up on the data entry section when using
    transaction CAT2...This is working fine and the data is entered into CATSDB.
      When using CADO, one can display the addtional field 1 and sort by this field.
      However, the users now want this additional field1 to be one of the selections when they
    use report CATSSHOW (CADO).
      Is there some type of way to configure SAP to have one of these additional fields show up
    as a selection field on program CATSSHOW (CADO)? My searches in this forum and the web
    have not shown me a solution yet.
      Or do I have to create a 'Z' version of CATSSHOW like ZCATSSHOW and do this myself?
    Thank-you,
    Rick Crawford

    Enhancement
    text
    F050S001
    FIDCMT, FIDCC1,
      FIDCC2: Edit user-defined IDoc segment
    F050S002
    FIDCC1: Change
      IDoc/do not send
    F050S003
    FIDCC2: Change
      IDoc/do not send
    F050S004
    FIDCMT, FIDCC1,
      FIDCC2: Change outbound IDoc/do not send
    F050S005
    FIDCMT, FIDCC1,
      FIDCC2 Inbound IDoc: Change FI document
    F050S006
    FI Outgoing IDoc:
      Reset Clearing in FI Document
    F050S007
    FIDCCH Outbound:
      Influence on IDoc for Document Change
    F180A001
    Balance Sheet
      Adjustment
    FARC0001
    Enhancements within
      archiving (FI)
    FARC0002
    Additional Checks for
      Archiving MM Vendor Master Data
    FEDI0001
    Function exits for
      EDI in FI
    FICT0001
    Exits for
      inter-company transactions
    RFAVIS01
    Customer Exit for
      Changing Payment Advice Segment Text
    RFBVX001
    Enhancement for bank
      directory transfer (Austria)
    RFEPOS00
    Line item display:
      Checking of selection conditions
    SAPLBANK
    User exit: Bank data
    SAPLF040
    WF: Preliminary
      posting (authorized for release)
    SAPLF051
    Workflow for FI
      (pre-capture, release for payment)
    SAPLFCPD
    One-time account data
      or different payee in booking
    SAPLSSRV
    User exit: Bank
      account numbers
    RFKORIEX
    Automatic
      correspondence
    please check which one  is better .

  • ADF to BPEL - Adding additional field for the web service call

    I have an existing ADF project that invokes a BPEL process. Recently I added 2 new fields to the bpel process and I want to populate this additional fields from the ADF when calling the bpel process.
    What is the best way to do this ? I dont see a way to regenerate the data control. Am I missing something ?

    correct, i am using the WS data control
    I manually added the 2 new fields in the ProjectName.xml and pagenamepagedef.xml files and also he necessary code in the bean class . But when i run it i still dont see the vallues passed to the bpel process.

  • Adding Additional field "Supplier name" & "Supplier No" in MB5B Report?

    Can i add the above stated two additional fields in the standard report of MB5b, is there any implicit enhancement in the standard report which can help achieve my objective?

    Hi,
    The possibility to include additional fields in the report MB5B is       
    limited to MSEG, just as you can see in the text of the                  
    report RM07MLBD_CUST_FIELDS itself:                                                                               
    This include contains the structure for additional fields for report 
    RM07MLBD ( transaction MB5B )                                                                               
    the following fields are not shown in the list of report             
    RM07MLBD                                                             
    If you want to insert some of these fields in the list of the        
    hidden fields delete the '*' in the type definition.                 
    >>* There are only fields from database table MSEG possible <<<<<<<<<<<  
    Please use only the following fields, because these fields           
    are considered during the creation of the field catalog;             
    plaese consider, that each active field will cost performance                                                                               
    If you need to add aditional information from other tables, like the     
    Reference Document Number you will need to  build your own query.    
    Regards,
    Mauro

  • Adding additional field in cProject is not working after transporting

    Hi All,
    My intention is to add additional field in cProject. So i copied a required view through program BSP_CUSTOMIZE and into another Z* BSP Application object. Then i had done the necessary modification on the view and saved. Then copied error.do controller and actived and tested in development server. It was working fine. So i moved the transport request for this object to quality system. When i tried to test the same thing in quality system, changes done in views are not reflecting.
    When i checked the entries in table BSP_APPLC, i didnt find any. I hope this is the reason why my changes in views are not reflected.
    Can anyone have idea, why it is not happening so. Kindly help.
    Thanks in advance.
    Regards,
    Karthick

    Ensure that in table BSP_APPLC is an entry for cprojects linking to your own aplictaion Zcprojects and is activated.
    I guess you have to reactivate the BSP_CUSTOMIZE in target system again.
    Please remeber: BSP_CUSTOMIZE is not supported officially.

  • Adding additional fields to an existing Infoset.

    Experts,
    I got a requirement to add additional fields to an existing info set which belongs to different Logical Data base.
    The existing info set is based on PNPCE LDB and the fields are from PD (i.e PCH ldb).
    Please let me know hw to add those fields...
    Thanks,
    Shrini

    Hi Shrini,
    You can add fields from PD infotypes (1000-1999) to a PNPCE infoset if the object has a relationship to a Person.  Example would be Position which has the relationship Holder.  You go to Change the Infoset.  Edit --> Change infotype selection.  Scroll down to the bottom and open Infotypes of Related Objects.  Open Position.  There you will see the possible relationships between a Position and Person.  Select Holder.  There you have the list of infotypes assigned to a Position that you can add by checking each.  You can then add whatever fields are in that infotype to the Infoset. 
    Problem comes in if there is no direct relationship between a Person and the object - such as Job that you want to include in the Infoset.  A Job describes a Position and a Person holds a Position, but a Person does not have the direct relationship to the Job except as a Dislike or Successor.    In this case you would need to create a new PCH Infoset with the root object Position.  Then using the relationships between Position and Job and Position and Person, you can access the infotypes from PA as well as PD.
    Paul

  • Adding additional fields in Sql Query (SQ01)

    Hi..
    please tell me all the steps to use additional fields option in  sap query (transaction code: SQ01)? can i use mandt field as additional field?
    Thanks and Regards
    Sri.

    Hi,
    You can add it in infoset using extra button.
    Here you can add the filed and the respective code for this field and add this in SQ01 in oytput list.
    Thanks
    Ajay

  • EEWB and adding additional fields to the IBASE header

    Hello,
    I have used the EEWB (Easy Enhancement WorkBench) to add additional fields to the IBASE header. The process ends with a success state and in all steps there are no logs. The objects are generated and visible in the database table of the IBASE header and activated.
    When I go to the IB53 transaction the systems starts compiling. After the compiling there are no additional fields visible?
    In the EEWB no more actions are possible and it seems only an append structure was created with the new fields (GENERIC_IC_TASK).
    How do I get the fields to be visible in the IBASE transaction?
    I am using CRM 5.0.

    Ramakanth/Kiran,
    For creating screen structures or additional fields on the IBase header screen you would need to manually append entries in Database Tables T371D.... through T371Z, it is a set of around12-14 tables depending on the scenario which would need updations.
    Once updated in the right sequence you can see the EEWB fields on the Ibase header screen.
    Hope this helps.
    Amit Sitlani

  • Adding Additional fields to DirectoryEntry items

    Is it possible to add additional fields to a DirectoryEntry item when creating a custom directory?
    I've got a custom directory working currently and now I want to add another field (Cellphone) to the directory.
    Here's what the xml would look like:
    <CiscoIPPhoneDirectory>
    <Title>My Test Directory</Title>
    <Prompt>Just Testing</Prompt>
    <DirectoryEntry>
    <Name>Johnson, Darren</Name>
    <Telephone>8110</Telephone>
    <Cellphone>7012616557</Cellphone>
    </DirectoryEntry>
    <DirectoryEntry>
    <Name>Johnson, Darrell</Name>
    <Telephone>8648</Telephone>
    <Cellphone>7012616557</Cellphone>
    </DirectoryEntry>
    </CiscoIPPhoneDirectory>
    This works in IE but throws an "XML Error [4]: Parse Error" exception on the phone.
    What I'd like to do is create a 4th SoftKey at the bottom of the page for "CellPhone".
    Thanks

    You can't extend the language that the phone understands... it can handle what's in the schema and that's that. However, if you look into the schema, you'll see that a CiscoIPphoneDirectory may have up to 8 softkeys:
    Thus, you can add your own softkeys the usual way
    Displayed sofkey label
    URL or URI action for softkey RELEASE event
    URL or URI action for softkey PRESS event
    position of softkey
    Of course, if you add your own softkeys, you're going to lose the ones that are normally there so you have to replicate those as well (so the first one would have the URL "Dial:8110", the second one "EditDial:8110", the third one "Key:Services" and the one you want to label cellphone (obviously the key doesn't have so much space so you might just call it "cell", would use the URL "Dial:7012616557" (all those URLs are in relation to the first directory entry you posted).
    Come to think of it, I suspect that a CiscoIPPhoneDirectory isn't really what you are looking for, since that element offers no means of triggering a different action for whatever item has been selected whereas a CiscoIPPhoneMenu allows you to have an URL per menu Item plus an url suffix per button so you can do all that you need to do in this case.

  • Adding additional fields on standard SAP pop up box

    Hi Experts!!
    I have to enhance IT0378(Adjustment Reasons) with additional fields. Same time I have to enhance a pop box wich is generating  in IT0171( General Benefits) in CE workbench.
    ( if you click on workbench, we get a popbox with a statement ' Benefit data for other Personnel assignments' . Selet green right mark with name 'work bench'. It will take you to Concurrent Employment Benefit Workbench screen. Choose any position in the left side then select create Adjustement reason button. you will get a pop box. Exaclty here i have to add the fields whatever i am going to enhace in IT0378 )
    Could you please give some easy steps to get it done.
    Regards,
    Ravi Visarapu.

    http://wiki.ittoolbox.com/index.php/Implement_a_screen_exit_to_a_standard_SAP_transaction

  • OBC4 - Adding additional fields

    Hello,
    We have received a request to allow users to post a customer # and material # when making a journal entry for specific accounts.  Our first thought was to evaluate whether or not the field status group could be adjusted in OBC4 to make these fields optional entries.  Unfortunately, these fields are not available in the OBC4 configuration.  Is there a different way to make these fields available for posting, or a way to add additional fields to the options in the OBC4 configuration?
    Thanks,
    Jordan

    Hi
    Check the link
    Screen Exit MIRO
    Regards
    Sanil
    <a href="http://www.vcq.biz/">wallpaper of nature</a>, <a href="http://www.utorrent.name/">utorrent</a>Hi

Maybe you are looking for