Adding column to existing form

Hi:
Need some guidance on how to accomplish it.
I created a form using blank page -> form -> form using a base table. I picked all the required columns from the list and created a nice form.
How do I go about adding new columns and removing other columns etc. Should I create a item and pick that as a database column?. Any thoughts on column adds and removal?
Thanks
Rajesh

Rajesh,
Adding or removing an item (column) should not be a problem. If you are removing, you
don't need to do anything special (if your form is a standard, wizard form). Adding an item
(column), make sure your source is database column.
Denes Kubicek
http://deneskubicek.blogspot.com/
http://htmldb.oracle.com/pls/otn/f?p=31517:1
-------------------------------------------------------------------

Similar Messages

Adding column to existed index syntax or example

Hi,
can any one please tell me the syntax or example for adding one more column to existed index.
Thanks in Advance
Krishna

Hello Mr Murali,
I do not believe you can alter index by adding more columns to it with ALTER command.
But you can always CREATE a new index with the columns that you need (ONLINE, if necessary) and then DROP existing index.

Adding columns in system form

Hi SBO developers!...
I want to add columns in "document numbering" form in its load event. Someone could sugest me how to do that? I try to make it but the error is "Matrix - Line Exists" after to execute the sentence "colum.add(id,16)"in my code.
Thanks a lot.
It's very importan to me.
VDM

> As far as I know you cant make an extra row on the
> fly if lines exist in a matrix.
The SBO UI-help says the same.
> I have not tried this but try adding a userfield to
> the XYZ table. This way the new column should be
> there always and you should be able to show and hide
> it...
I can confirm that, that's exatly what i'm doing. For a simple field, you get a column with an EditTexts.
If you specify valid values, you get a column with ComboBoxes.
Show / Hide works just like showing/hiding other matrix fields. If you want to it programmatically, you may want to have a closer look at table CPRF. I didn't figure out how to do it using the SDK.
If anyone is interested I could post following functions:
SetInvisible(fieldName As String, formType As String, itemId As String)
SetVisible(fieldName As String, formType As String, itemId As String)
Florian

Adding columns to existing template layout?

In the "Contemporary" Template, I would like to modify the Section Text layout in Portrait Mode. I would like to make the text box have 2 columns instead of 1. These options are greyed out, however. How do I go about doing this?
Many thanks in advance

You are working a portrait template therefore the column options are not available.
Yes, contact will flow, but its not endless, your text will flow only into the pages it needs.
You can use a landscape template if it suits your project - and its possible to set it up to use portrait and landscape.
I am told that most "words only" books are written in MS Word or similar applications and pasted into inDesign, iBooks etc,. and then re-formatted to suit and the page producing flowing text works really well!

Adding Columns to the matrix in SAP B1 user form using Visual studio 2010

Hi,
Using Visual studio 2010, I have created a SAP B1 user form( b1f ) with one matrix.Matrix is having 5 columns. Its working properly. Later, I want to add few more columns. Then I added columns to the matrix as I have created columns initially. But, it does not saves.
i.e, Whenever I run, In B1 I could see only old columns. Newly created columns are not showing.So, I closed the .net project and opened again. Created columns are not showing in visual studio b1f itself. So, I created again and saved. But, its not saving.I tried it many times.
What I am missing?
Any help is appreciated.
Thanks in advance,
Parvatha Solai.N

Hi Parvatha,
Are you using B1 Studio? Anyway try to clean the solution first then rebuild it. This would re-copy files to the output directory, that contain your changes.
Best regards,
Pedro Magueija

Newly added column in a table not displayed in a related form

I added a new column (DNAMECONT as varchar2) in a table I created a Form on. I added this new field in my Form as a text field, and on the customized tab of the form wizard, this following code is displayed as expected :
<TR><TD><#DCONTRACTOR.LABEL#></TD><TD><#DCONTRACTOR.ITEM#></TD></TR>
But I cannot view it once I run my form.
did I forget to do something or is there something I did wrong?
Thank you for your help.
Bertrand

Sorry to interupt, as far as I understand, if you add extra column to a table after the form is built and you want to add this new column in your form. When you add new item in your form, the name you give to the item should exactly match the column name of your new column of the table. Now, you said you added a new column called DNAMECONT, but the
html shown in form wizard is <#DCONTRACTOR.LABEL#>, <#DCONTRACTOR.ITEM#>, two names do seem to match. Is that the problem?
null

Is it possible to set up a form with a submit button where the data in the fields gets added to an existing excel file, just like 'collect response' but without connecting to the internet?

I have a form that I want to use to collect peoples information with a submit button. I am trying to get the data that gets inserted to be added to an existing excel doc when the submit button gets hit, the form then resets and someone else can fill in the same form, hit submit and his data gets added to the existing data in the same excel doc. It is basically the same as the 'collecting response' option but without having to be online. The form is going to be used at a boat-show and I am going to get people to fill it out on an iPad. Does anybody know if this is possible?

You could connect a bunch of 3700s to each computer and do this .
Or...since you're the one who monitors the monthly limit, you could restrict an individual's internet access once you see that you guys are coming too close to the cap.
I don't work for Cisco. I'm just here to help.

Adding a new Big INT column to existing table in production, which holds 700 million records will impact anything in production?

Hi Guys,
I have to add a new Big INT column to existing table in production, which holds 700 million records and would like to know the impact?
I have been tolled by one of my colleagues that last time they tried adding a column to same table during working hour and it locked out the table and impacted the users.
Please suggest/share If any one had similar experience.
Thanks Shiven:) If Answer is Helpful, Please Vote

If you add a new column to a table using an ALTER TABLE ADD command and specify that the new column allows NULLs and you do not define a default value, then it will take a table lock. However, once it gets the table lock, it will essentially run instantly
and then free the table lock. That will add this new column as the last column in the table, for example
ALTER MyTable ADD MyNewColumn bigint NULL;
But if you your change adds a new column with a default value, or you do something like using table designer to add the new column in the middle of the current list of columns, then SQL will have to rewrite the table. So it will get a table lock, rewrite
the whole table and then free the table lock. That will take a considerable amount of time and the table lock will be held for that whole period of time.
But, no matter how you make the change, if at all possible, I would not alter a table schema on a production database during working hours. Do it when nothing else is going on.
Tom

Adding a column to a form in a meeting list

Hi -
I have a meeting list/calendar where I would like to add a column to the form that you get when you click to add a new meeting. I have created the column already, but can't figure out how to make it appear in the pop up form. I'm pretty new at
all this, so I'm guessing I'm missing something simple? I can add the column in other views, but I can't seem to get it to show up when you click the "add" button.
Thanks,
Amy

Hi Amy,
Open the ‘Event’ content type, and click your column under ‘Columns’ section, then click ‘Remove’ to remove it from the form. After that, re-add the column into the ‘Event’ content type through clicking ‘Add from existing site or list columns’, compare
the result.
Please create a new column, and on the ‘Additional Column Settings’ section, select ‘Add to all content types’, test again, then compare the result.
If this issue still exists , please create a new calendar, compare the result.
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

Adding a column into existing index

Can I add a column into existing index?
or do I need to drop the index and recreate one?
Thanks.

but there is no way to add a column to an existing table10:43:24 TEST.SQL>create table test10:43:28 2 (
10:43:29 3 a number
10:43:32 4 )
10:43:34 5 tablespace tools
10:43:36 6 ;
Table created.
Elapsed: 00:00:00.06
10:43:38 TEST.SQL>alter table test add
10:43:44 2 b date;
Table altered.
Elapsed: 00:00:00.68
10:43:48 TEST.SQL>desc test
Name Null? Type
A NUMBER
B DATE
10:43:51 TEST.SQL>drop table test;
Table dropped.Indeed there is.Yoann.

Modify an existing form

I wonder if it is possible to scan in an existing form and modify it for fill in usage.
IF so what would I need to do to make this happen?
Tks
[email protected]
Gil

Yes, you can edit the form at anytime. The new field will just be added as a new column in the response table. Nothing will be lost.
Randy

How to have cascading lov for a single column in tabular form

Hi,
How to have a cascading lov for a single column in tabular form
ie i have one employee name column
in tabular form if v pressed add row then one row ll be added
In my scenario based on first row value
the second row value to be displayed
To achieve this what i have to do ..
Regards,
Pavan

READ Cascading select list on tabular form and
Oracle APEX 4.0: Cascading LOVs/Select Lists | Inside Oracle APEX by Patrick Wolf BLOG
helps you,
Pars.

How to get added columns in the after DDL trigger?

As title, I want to get information, like name/type/.., about the added columns by sql statement "alter table *** add (***)" in the after ddl trigger. But looks like dba_tab_columns view doesn't include the added columns.
Thanks

Hi
Hi try other versions of the trigger like
create or replace trigger addl_trigger
after alter on schema
declare
TYPE attrs_cur IS REF CURSOR;
m_cur attrs_cur;
m_event varchar2(50);
m_user varchar2(50);
m_owner varchar2(50);
m_user1 varchar2(50);
m_type varchar2(50);
m_name varchar2(50);
m_column varchar2(50);
m_cnt NUMBER;
m_stmt varchar2(512);
number_of_modified_objects BINARY_INTEGER;
t ora_name_list_t;
begin
m_event:=ora_sysevent;
m_user:=SYS_CONTEXT('USERENV','SESSION_USER');
m_user1:=ora_login_user;
m_owner:=ora_dict_obj_owner;
m_type:=ora_dict_obj_type;
m_name:=ora_dict_obj_name;
if (m_type='TABLE' and m_event='ALTER')
then
          execute immediate 'select count(*) from dba_tab_columns where owner=:1 and table_name=:2' into m_cnt
          using m_owner,m_name;
          insert into log values (m_cnt);
          dbms_output.put_line('->'||m_cnt);
          OPEN m_cur FOR 'select c.name from sys.col$ c, sys.obj$ o, sys.user$ u where o.obj# = c.obj# and o.owner# = u.user# and u.name=:1 and o.name=:2' using m_owner,m_name;
          LOOP
                    FETCH m_cur INTO m_stmt;
                    EXIT WHEN m_cur%NOTFOUND;
                    insert into log values (m_stmt);
                    --dbms_output.put_line(m_stmt||'**************');
                    END LOOP;
end if;
but all versions continue to insert only the already existing columns. I think that Oracle actualize the dictionary first after this system event.
Bye, Aron

SSAS Tabular - Adding Column to a table gives error "Object reference not set to instance of object"

If I make changes to a table in SSAS Tabular Visual Studio, the newly added column gives error as "Object
reference not set to instance of object"

Hi VikasJain13,
According to your description, you get the "Object reference not set to instance of object" error when adding columns in Tabular. Right?
Generally, it throws this error when the internal code is accessing the property of an empty object. As you mentioned it happens when you make changes on a table, mostly it means that table is already a empty object. Please re-process your tabular to see
if this table is still existing.
If you have any question, please feel free to ask.
Simon Hou
TechNet Community Support

Attachments added to the Interactive form is lost after submit

Hi All,
I have a scenario where the user can add attachments to the Interactive Form Online and click on Submit to archive the filled form. The problem is that i am not able to retrieve the attachments added to the form.
The datasource of the ITF is bound to the View Context node and the pdfsource is bound to an attribute of XSTRING type.
Here i am able to see the changed values of the Input fields in my context node. But, any attachments added is lost.
How can i retrieve the attachments? I tries calling the Methods SET_TASK_GETATTACHMENTS and GET_ATTACHMENTS of PDF Objects but it always returns null.
FYI,
if i use file upload UI Element and upload an existing form with attachments then i am able to get the list of attachments by calling the Methods SET_TASK_GETATTACHMENTS and GET_ATTACHMENTS of PDF Objects before this PDF is displayed in the next view. (binding the XSTRING of FIle Upload UI to the PDFSOURCE of the ITF).
Here also if i add some new attachments to the PDF and click on submit then these new docs are lost.
In short whenever i add attachments to the pdf dynamically via add attachment option after the PDF is displayed the new attachments are lost.
Please let me know how to correct this.
Thanks,
Abhishek

There is a default functionality provided by Adobe... If all your fields are field, you can not submit. It will prompt .. to fill the form.
Only you have to mark those field as mandatory.
So select the field -> Go to Object Pallet -> Value Tab -> select the type as User entered Required
This will solve your problem.
You can also customise the requirements through scripting language.
cheers
Satya

Adding column to existing form

Similar Messages

Maybe you are looking for