Adding Columns in More Intervals - AS03

Hello,
Does anyone know how to add a column in transaction AS03 =>Select an Asset=>Time-dependent=>More Intervals=>Configuration=>Administrator=>
We are trying to add FISTL AND GEBER to the layout.

> During modifications in smartform I have to add 2 more columns in the main window ,which already consists of 6 columns ,whether it is possible to alter the column width (as: 1 cm , 2 cm , 07 cm , 2.75 cm ,2.33 cm,and 3.06 cm as of total 18 cm ) to add new columns in the window ?
First of all, you better copy to Z smartform and change it. if you have already modified the standard....
>
> how can i alter the third column of 7 cm width to 3 columns of 2.5cm,2.5cm,2 cm column ?
> is it possible by using templetes or could be done by the alteration way ?
Just change the 3rd column to 2.5CM and add more columns for the remaining space. You can do it if the field value is not too big but make sure it doesnt give you dump by assigning different values.
>
> Reagrds
> Swapnil Kamble

Similar Messages

Adding Columns to the matrix in SAP B1 user form using Visual studio 2010

Hi,
Using Visual studio 2010, I have created a SAP B1 user form( b1f ) with one matrix.Matrix is having 5 columns. Its working properly. Later, I want to add few more columns. Then I added columns to the matrix as I have created columns initially. But, it does not saves.
i.e, Whenever I run, In B1 I could see only old columns. Newly created columns are not showing.So, I closed the .net project and opened again. Created columns are not showing in visual studio b1f itself. So, I created again and saved. But, its not saving.I tried it many times.
What I am missing?
Any help is appreciated.
Thanks in advance,
Parvatha Solai.N

Hi Parvatha,
Are you using B1 Studio? Anyway try to clean the solution first then rebuild it. This would re-copy files to the output directory, that contain your changes.
Best regards,
Pedro Magueija

Adding column dynamically

Hi all
I have a requirement of adding the columns to a Classic Table at run time.. the number of columns are not fixed. the number of The data in there columns will be dispaled from the view initialized at run time.
I tried searching out threads on adding column dynamically but didtn get one..
pls help me out ..
naveen

Of course you can add columns dynamically, but this always needs to be from the same VO, a OA table cannot be based on more than one VO.
So if it all the columns are from the same VO, why take the pain of adding and removing columns, why not just either render it or hide it.
Thanks
Tapash

Unable to edit New form if fields/Columns are more than 60 or 65

Hi SP Gurus,
I am facing very unusual problem which is I am not able to eidit NewForm if fields/Columns are more are more than 60 or 65.<o:p></o:p>
https://support.office.com/en-au/article/Create-a-custom-list-form-using-SharePoint-Designer-917d8fdb-ee00-4441-adb3-a94612d1d105<o:p></o:p>
By following above link I have added TestNewForm.aspx and trying to edit but I getting very stupid and unclear error message like this<o:p></o:p>
Unable to display this Web Part. To troubleshoot the problem, open this Web page in a Microsoft SharePoint Foundation-compatible HTML editor such as Microsoft SharePoint Designer.
If the problem persists, contact your Web server administrator.

Hi,
Per my understanding, the NewForm.aspx is not editable when there are more than 60 or 65 columns in the list.
Is there any warning or error message when editing the NewForm.aspx page in SharePoint 2010(screenshot would be better)?
I tried creating a list contains more than 60 columns, then edit the corresponding NewForm.aspx in SharePoint Designer 2010, it works as expected.
I suggest you create another list and make the test again to see if it is an issue of this list.
Thanks
Patrick Liang
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

How to make added columns to be visible by default in interactive report?

Hi,
I've added two columns to an interactive report.
When I run the page, the added columns are not visible.
Then I made them visible through 'Select Columns' option.
But next time when I log in those two columns are again invisible.
How can I make the added columns to be visible by default in the interactive report?
Thanks,
Guy

Hi Steve,
I am ahving a similar issue.After I migrated my classic report to interative report, I have added few columns to the SQL query...I am not anle to see these in the report..I deint understand the solution u gave here..Can you please elaborate..
Where can I include the "actions" option? and how do I use the Save Action.
Can you please provide more details.
Thanks in Advance

Stock Requirement List - MD04 - adding columns in this list

Dear All,
I am working on the Stock Requirement list ( transactioncode MD04) and the customer wants to add columns with the fields STPO-DATUV ,date of change of a drawing, and the drawing number with revision level STPO-YY_DZEINR.
There is a badi MD_ADD_COL_EZPS which provides in adding columns, but according the structures MDPSX , MDEZX and MDSUX there are no fields in thoser structures, which directly match with the required fields; somebody has a clue to help me out and get it working.
For instance: Vendor- and Customer data can be added by using the pushbuttons and those fields are available from above mentioned structures.
Thanks in advance and kindest regards,
Rene.

Hi Utpal Mishra
You guessed correctly. I missed to inform our Strategy. We are using Strategy group 11 Make-to-stock prod./gross reqmts plnning.
User is not able to do PGI or create delivery. He says I have enough stock in MMBE but why system is not allowing.
Here there are some pending document like -
1. Pending sales order
2. Pending deliveries (picking not done)
2. Delivery created & Picking Done but PGI not done. These things will have a commitment against the stock. But we are interested in getting these document numbers, so that we can take come action against them.
MD04 simply shows the mrp element as order / delivery but the document number is not available. How to find these documents.
Please help. Is there any table or a standard transaction ??
Thanks

When adding columns, why do I get overrides on style?

Hi all,
When I'm adding columns in a certain document I end up with the new columns having overrides on them. How can I avoid this?
The columns I added are seen in the middle.
As you can see the they all get a "shift down" by -22 pt.
I use this shift down on some other place in the document, but the table columns are clean from that kind of override, and just by selecting a column and adding 4 new columns "to the right" of that column, I would expect the new ones to get the exact same properties as the one selected.
Can anyone try to explain what might be wrong with my document or way of working?
Adding info: It seems there's something in the styles - many properties on them... This has noting to do with cells specifically. Just adding a textbox results renders the text this way as well, with the baseline shift (only no override symbol).
Best regards,
Andreas

Ah... now I get it. The default styles of the document were set to a specific paragraph style and another character style.
Setting the defaults to [Basic Paragraph] and None respectively seems to put everything in order.
(You set a default by clicking outside the document so that nothing is selected, and then you select the styles [Basic paragraph] and None)
Case closed.

Discoverer 10.1.2 does not refresh new added column

Hello,
I need help to add a new item to EUL Business Area folder for a new added column in the database table.
When I refresh the folder in the BA EUL, the result shows no difference between the folder and the underlying table in the database; however, when I quey the table in the database, a new column is there. The refresh of the folder in the Discoverer Admin tool cannot find the newly added column. Weird!! The first time saw this problem.
Could someone shine some light on it? Would be really appreciate it!
Ping

I have a slightly different problem and can't solve it! When I refresh the EUL, the result shows the differences between the folder and the underlying tables in the database. However, it does not refresh the EUL in Discoverer Administrator 10g. Nothing happens! When I try to refresh again, the same list is shown... Does anyone know what could be happening?
Thanks

Excel 2007 to Sql server table. Column with more than 255 characters.

Hi there,
I am facing a problem while converting data from Excel 2007 to SQL server 2005 table. I am using BIDS 2005.I have an excel file where one particular column has more than 255 characters. I use OLEDB connection for excel file as there is no driver for Excel
2007 in BIDS2005. I am using Microsoft Office 12.0 Access Database Engine OLE DB Provider for Excel file.
Next, I changed advanced properties for the column to DT_NTEXT. But when I am getting errors on execution. They are:
[OLE DB Source [1949]] Error: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E21.
[OLE DB Source [1949]] Error: Failed to retrieve long data for column "action".
[OLE DB Source [1949]] Error: There was an error with output column "action" (2046) on output "OLE DB Source Output" (1959). The column status returned was: "DBSTATUS_UNAVAILABLE".
[OLE DB Source [1949]] Error: SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR. The "output column "action" (2046)" failed because error code 0xC0209071 occurred, and the error row disposition on "output column "action"
(2046)" specifies failure on error. An error occurred on the specified object of the specified component. There may be error messages posted before this with more information about the failure.
Please advise on how can I deal with columns having more than 255 characters in Excel file.
Thanks!

Here is what your connection string should look like for excel source
Provider
=Microsoft.Jet.OLEDB.4.0;Data
Source=c:\temp\test.xls;Extended
Properties="EXCEL 8.0;HDR=YES";
http://sqlworkday.blogspot.com/

How to get added columns in the after DDL trigger?

As title, I want to get information, like name/type/.., about the added columns by sql statement "alter table *** add (***)" in the after ddl trigger. But looks like dba_tab_columns view doesn't include the added columns.
Thanks

Hi
Hi try other versions of the trigger like
create or replace trigger addl_trigger
after alter on schema
declare
TYPE attrs_cur IS REF CURSOR;
m_cur attrs_cur;
m_event varchar2(50);
m_user varchar2(50);
m_owner varchar2(50);
m_user1 varchar2(50);
m_type varchar2(50);
m_name varchar2(50);
m_column varchar2(50);
m_cnt NUMBER;
m_stmt varchar2(512);
number_of_modified_objects BINARY_INTEGER;
t ora_name_list_t;
begin
m_event:=ora_sysevent;
m_user:=SYS_CONTEXT('USERENV','SESSION_USER');
m_user1:=ora_login_user;
m_owner:=ora_dict_obj_owner;
m_type:=ora_dict_obj_type;
m_name:=ora_dict_obj_name;
if (m_type='TABLE' and m_event='ALTER')
then
          execute immediate 'select count(*) from dba_tab_columns where owner=:1 and table_name=:2' into m_cnt
          using m_owner,m_name;
          insert into log values (m_cnt);
          dbms_output.put_line('->'||m_cnt);
          OPEN m_cur FOR 'select c.name from sys.col$ c, sys.obj$ o, sys.user$ u where o.obj# = c.obj# and o.owner# = u.user# and u.name=:1 and o.name=:2' using m_owner,m_name;
          LOOP
                    FETCH m_cur INTO m_stmt;
                    EXIT WHEN m_cur%NOTFOUND;
                    insert into log values (m_stmt);
                    --dbms_output.put_line(m_stmt||'**************');
                    END LOOP;
end if;
but all versions continue to insert only the already existing columns. I think that Oracle actualize the dictionary first after this system event.
Bye, Aron

SSAS Tabular - Adding Column to a table gives error "Object reference not set to instance of object"

If I make changes to a table in SSAS Tabular Visual Studio, the newly added column gives error as "Object
reference not set to instance of object"

Hi VikasJain13,
According to your description, you get the "Object reference not set to instance of object" error when adding columns in Tabular. Right?
Generally, it throws this error when the internal code is accessing the property of an empty object. As you mentioned it happens when you make changes on a table, mostly it means that table is already a empty object. Please re-process your tabular to see
if this table is still existing.
If you have any question, please feel free to ask.
Simon Hou
TechNet Community Support

I started making a movie and all was well. I added a few more pictures and some sound and played it back. It plays so far and then the pictures break up into colors and then the screen turns green. The sound continues.

I am making a movie from still pictures. I used no theme and then started adding pictues. When I played it back, all was well. Then I added a few more pictures and some sound. When I play iot back it plays just so far and then the sound continues, but the screen turns green or the pictures break up into colors.

Sorry, everyone. I think I may have figured out what it was all down to...........
I had left the IDE ribbon cable plugged into my third HDD, with the power cable unplugged. I did this so as not to endanger my years of work on the third drive, until Windows had setup. I have in the past, accidentally chosen the wrong partiton to format, so this seemed a good way to avoid it from then on.
This was not a problem on my old system, but it seems this system doesn't like it.
I must have left the drive completely unplugged, the times Windows did setup. Amazing really. I couldn't see the woods for the trees.
Anyway, I'm sorry to have bothered everyone with my problem.
Cheers
Marcus
edit : Sorry Syar2003, I didn't see your reply until I had posted mine. Many thanks for taking the time to try and help me, it seems as though I may have sorted it now. I am using IDE drives until I can afford SATA. But many thanks for the heads-up on the NF4-SATA compliance, I'll be sure to bare that in mind.
I didn't actually check the NVRAID/IDE ROM version before updating the bios, so I have no idea if the revision was changed when Liveupdate flashed the Bios, I'm afraid. I didn't know they would be updated at the same time.
Again, cheers
Marcus

Irritating problem with adding columns

I am adding columns to jtable. And then moving it to required postion.
But whenever I edit those columns all the newly added columns and the first column reflects those changes. ie whatever I enter in the new columns, it appears in all newly added columns and the first column as well.
whats wrong I am doing here.
EditableHeaderTableColumn ncol = new EditableHeaderTableColumn();
TableColumnModel columns = table.getColumnModel();
int c = table.getSelectedColumn();
columns.addColumn(ncol);
columns.moveColumn(i-1, c+1);

Make sure you are not sharing the TableColumn instance or adding a TableColumn that already is in the TableColumnModel.
When resizing the table column, do the others resize too. ?

Newly added column not displayed in Interactive report

Hello,
I have a tableA with 3 columns.In the application i am displaying as Form with Report region as Interactive report(Oracle 10g Application Express 3.2).
I added one column to tableA.Now when i am refreshing the report by adding that column in the select query,the new added column is not displayed in the application.
How can i do this so that the added column can be displayed.I dont want to delete the whole thing and redo it again.
Thanks
Siya

Hi Siya,
The Interactive Report will not show you the newly added columns by default. You have to select those columns from the actions menu and when all the required fields are displayed then save it as the default report.
Then you will be able to see all the columns.
Hope this solves your problem.
Thanks,
Satish.

AS01 Asset Master - Custom More Intervals Component

Hello experts,
i need your help to know how to create a custom More Intervals component, is like the same component present in Time-dependent tab, i found the screen in the SAPLAIST program, i add a custom screen in XAIS, and add a push button, so i can see the push button, but i dont know how to call that component, or make a similar, maybe there is another aproach to do this, please help.

1.
0.350
FI-AA-AA-A
1938453
Error when changing the depreciation key
11.06.2014
2.
0.370
FI-AA-AA-A
1539873
ASSERTION_FAILED during fixd asset creation w/ reference (2)
16.12.2010
3.
0.340
FI-AA-AA-A
1469531
Fixed asset with reference ASSERTION_FAILED
15.12.2010
4.
0.330
FI-AA-AA-A
1075636
ASSERTION_FAILED in Asset Accounting transactions
24.07.2007
5.
0.360
FI-AA-AA-B
931764
Runtime error ASSERTION_FAILED
11.04.2006

Adding Columns in More Intervals - AS03

Similar Messages

Maybe you are looking for