Adding link titles to all pages
I've completed all the pages for a site design in FW CS4, but now want to add title=" " to each hyperlink. There are repeated hotspots in all the site pages, where I copy/pasted from hotspots on the first page. So I'm wondering if there is a way to add the title code to all the repeated links at once, without going into Dreamweaver and doing it one at a time.
I don't know whether or not you can add link titles in Firerworks, because I don't use Fireworks to produce HTML. It isn't an HTML authoring environment, and whenever I've looked into its HTML I've wished I hadn't!
I do have a suggestion for you, that might be useful to you.
My favorite text editor is TextPad (www.textpad.com). It's shareware (more than worth it, to me!), but there's a trial you can use. It can perform search and replace across multiple open documents. To change the link titles in 20 documents, you'd open your 20 documents, set up your search/replace for "All documents," and hit "Replace All." Then move on to the next link title. If you need to search and replace something that spans more than one line, you can check the box to use the regular expressions. For new lines, use \n (for tabs, use \t).
Similar Messages
-
Display report title in all pages
Hi,
How do I show my report title in all pages that have the report, that now only shows me the title on the first page,
Thank you very much for your help!
Greetings!Hi Abhilash,
Thanks for your response. I need one clarification in your solution,that all the steps to be done in sub report and later on should it be inserted in main report?
And i am facing one more issue that my records are starting from second page not from the first of preview tab.
Design section page:
1st Page in preview:
2nd Page in preview:
Thanks,
Aravind
Message was edited by: Aravind Sreeram -
Hi
Can I set page title for all pages in project, by using filter or something else? Or the only way is to specify the name in each page?
MichalMight be possible with filters, but that would be a rather expensive task. Just create an include file which you include in all pages. This way you also have a single point of maintenance.
-
Show link/button after all pages have been visited
I want to make a course that branches out, so you can pick in which order you can learn about the different subjects, and at the end of each you will get the option to go back to "main screen"(this is also where you pick which subject to learn about). There are 4 subjects that have 1 slide with 6 slides under there again.
What I want is to have a link/button on the "main screen" that allows you to go to the closing slide (just a plain thank you for your time etc), but I only want it to be visible after you've visited all the learning pages (4+(4*6)=28).
I looked at advanced actions and conditional actions, but I didn't really find anything. Anyone have any ideas or work around? Thanks!This kind of thing has been explained many times on this forum. In fact it's come up so many times over the past few years I'm quite surprised your searches didn't find anything about similar interactions.
If your continued searches yield nothing, and you want a very detailed step by step tutorial on how to achieve such an interaction, I would suggest this e-book:
http://www.infosemantics.com.au/adobe-captivate-advanced-actions
It has a number of practice exercises with example CPTX files showing how this is achieved. -
Help Wih adding a Title to the Page
Hi - I am trying to give each page a title in the tool bar
where it should allow a title to be put. Dreamweaver 8 will not
allow me to add a title and just removes it. I created a template
that all of the pages are based on and i have inserted the code as
below. I am not a web designer and have no knowledge of html and
this has been put together with trail and error. If anyone can help
resolve this i would be most appreciated.
Regards
MikeUsing Frames? You must set the title tag's value in the
frameset page.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"ferrarikid123" <[email protected]> wrote in
message
news:e23dsn$24i$[email protected]..
> At the moment when I preview in browser I get a
"untitled document" at the
> top.
> How do I change this to give it the name of the company
instead? Like at
> the
> top of thiswebsite it says "adobe - posting a message -
Microsoft Internet
> Explorer", how do I do that? Thanks!
> -
Hello all,
The below code creates the custom action script link. however this is executing for all the pages.
I want to execute only to list not on all the pages. How i can acheive this. Please help
var context =
new SP.ClientContext.get_current;
this.oWebsite = context.get_web();
var collUserCustomAction =
this.oWebsite.get_userCustomActions();
var scriptLink = collUserCustomAction.add();
scriptLink.set_name('Welcome');
scriptLink.set_title('Welcome');
scriptLink.set_description('Welcome to new custom script Link');
scriptLink.set_location('ScriptLink');
scriptLink.set_scriptSrc('~Site/Scripts/test.js');
scriptLink.set_group('');
scriptLink.update();
NavaneethThen Edit the list page add the script editor web part on the page . Copy the paste the script. Now it will affect the list only. Or else in your script just validate the list id.
Ravin Singh D -
Why is the title on all pages of my slideshow? Please help!!
Hello,
I created a slideshow in IMovie with music and still photos. I just dropped it into a theme in IDVD. I would like the title to only show on the front page and it is on every picture. Also, how can I center my title? It is only left flushed. The theme (transparent black) I picked doesn't seem to have a title page. It just goes right into the slideshow.
I have been working on this project for hours. It seems that it is much harder than it should be. My friend used her PC program and it took 10 minutes. Ugh!
Thank you!I got it!
-
Adding Analytics Script to All Pages of Site
Hi. I'm new to DW so pleaes forgive me if this is a silly question.
I'm trying to install my analytics code on a site I recently created. I know I can go through each and every page and paste the code onto the page, but there has to be a more efficient and easier way to do this.
How do insert a peice of code into the header of every page on a site?Use a server side include for your Google code.
http://www.smartwebby.com/web_site_design/server_side_includes.asp
Insert a server-side include statement in your document. I typically put Analytics code down towards the end of the page just before the closing </body> tag.
Server-side includes can be used for all your common sitewide elements, too, such as headers, footers, menus, etc... They make editing much faster because you only need to open one file, save and upload it. All the magic happens on the server.
The caveat is that your server must support the use of server-side includes. Most reputable ones do. And you'll need to save your site pages with either .php or .shtml extensions. Most shared hosting accounts don't don't support SSIs in straight .html pages without jumping through hoops. It's usually easier to just rename the pages to .php or .shtml.
Nancy O. -
At the moment when I preview in browser I get a "untitled
document" at the top. How do I change this to give it the name of
the company instead? Like at the top of thiswebsite it says "adobe
- posting a message - Microsoft Internet Explorer", how do I do
that? Thanks!Using Frames? You must set the title tag's value in the
frameset page.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"ferrarikid123" <[email protected]> wrote in
message
news:e23dsn$24i$[email protected]..
> At the moment when I preview in browser I get a
"untitled document" at the
> top.
> How do I change this to give it the name of the company
instead? Like at
> the
> top of thiswebsite it says "adobe - posting a message -
Microsoft Internet
> Explorer", how do I do that? Thanks!
> -
Hello to all,
I have now organised my files and automatically updated links
that were already created. However, I have now realised that I wish
to add something to one of my pages and link it to another page
within my site. However, this needs to be done on all my pages, how
can I accomplish this without having to go to each page and do the
link manually?
Many thanks,
JeffFirst, look into SSI (server side includes) which will
require major
redesign of every page on your site, but will make this
problem go away
completely in the future.
Next, use the links editor in Dreamweaver if you are changing
all specific
links in the site, or use find and replace. When used
creatively, you can
actually add or remove links to a all pages as long as there
are exact
similarities in the code.
For instance, if you have something like:
<p><a href="newpage1.htm">link
1</a></p>
<p><a href="newpage2.htm">link
2</a></p>
<p><a href="newpage3.htm">link
3</a></p>
in your code, you could find:
<p><a href="newpage3.htm">link
3</a></p>
and replace it with:
<p><a href="newpage3.htm">link
3</a></p>
<p><a href="newpage4.htm">link
4</a></p>
That will add a link to your list.
Make a backup of your site and then play with find and
replace. if you screw
it up, just restore from the backup and start again.
Then read up in SSI... change one line in one file and it
changes every page
that has the include.
"jeffuk123" <[email protected]> wrote in
message
news:eluh2s$gi1$[email protected]..
> Hello to all,
>
> I have now organised my files and automatically updated
links that were
> already created. However, I have now realised that I
wish to add
> something to
> one of my pages and link it to another page within my
site. However, this
> needs
> to be done on all my pages, how can I accomplish this
without having to go
> to
> each page and do the link manually?
>
> Many thanks,
> Jeff
> -
When printing a list in Address Book, how can I select more than the default Attributes and keep them selected when I print again? I want to print ALL information for contacts so I have email address, notes, phone, company, title, etc all on one page. I don't want to have to check off an additional 5 or 6 attributes each time I print out contact information. Is there a way to change the default setting for printing lists, so it is not just "phone," "photo," and "job title?"
I have a user who wants to do this same thing. I did not find any way either to default the attributes to anything other than what you see the first time. Seems like such a trivial thing, hard to believe they do not allow it. I did find a program for this called iDress but I can't seem to download it from any links on the Internet. Not sure if it is free or not, but it was recommended by a link on the Mac support site.
-
Identical Related Link for all pages
We're trying to put a set of identical Related Link pages for all pages.
I tried the following.
Modify the DefaultFramework Page.
Drill into Desktop Innerpage
It consists of :
Detailed Navigation
Dynamic Navigation
Drag&Relate
Related links
Portal Favorites
Content Area
Made of a Copy of the Content Area iview, and added 2 Relate Links into this iview (save it as Content_Area_2)
Removed the Original Content Area under Desktop Innerpage and added Content_Area_2)
What I essentially did was assigned related links to the content area of the Desktop Innerpage. That should bring up the Related Links for all iViews.
Is that how it can be done ?
Does not seem to work.
Is there another way of doing it.boerli wrote:
> In GoLive there was a wonderful feature which allowed
you to click any image in
> the bin and it would display instantly all the links to
pages on which that
> picture was used. It allowed you to find content and
other pics on other pages
> related to that image instantly. It prevented
duplication. Wonderful feature I
> used constantly on running our huge websites.
>
> I can't find anything like that in DW. Now I have to try
to remember on which
> other pages I used that image. It's a nightmare...
>
> Can anyone help?
>
> boerli
>
> Am I missing something? Can anyone help me find this
feature?
You want to find all pages that have a particular image on
it?
From the Edit menu select Find and Replace.
In the Find In drop down select Entire Current Local Site
In the Search drop down select Source Code
Then in the Find field type in the filename
Now click Find All
The search results will show you all pages, you can double
click on each
file and the page will open with the filename highlighted in
the code.
Its not perfect, but Dreamweaver isn't GoLive. If its a
feature you
would like to see ask Adobe:
http://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
Dooza -
How do I get the book title and author to appear on all pages?
I'm trying to create a new layout, and I can't quite figure out some of the auto-text boxes.
I'd like the book title, and author to appear at the top of the pages.
Also, I'd like the chapter title to be at the top of the page for the subsequent chapter pages, but not in the same size as the chapter title at the beginning of the chapter.
I've tried copying the chapter text box in layouts, then applying it to the chapter pages. However, when I reformat the copied box for text size and orientation, the reformat effects all instances of that text box. Grr.
(I know this all sounds like too much text and garbage on each page, but it's for an instructional piece that people will likely print a page or two at a time)Hello Andy,
Have you looked at the Layout Section.
If it is not visible pull down the handle and the master pages are there down the list for you to add and change.
Just first duplicate any page that you may want to change and then add the name and author titles to that page and press "APPLY"
I hope this helps…
Regards, -
Change the Page Title for all the pages when viewing the Reports in Bi Publisher
Hello ,
I have a requirement for changing the Page Title for all the report displayed pages on the browser window.As far as I know, answer is NO.
it's very simple answer Manikandan-S-Oracle
for 1210326 's requirements there are some places for changes of property "title" and in some pages "title" can be different
"one place or option for changing" does not exist imho ( may be i'm wrong )
so you can change places for your needs but not sure what it's adequate
as example
...wls\user_projects\applications\bipdomain\xmlpserver\catalog\navigator.jsp --> find <title>
it changes title in http://somehost:7001/xmlpserver/servlet/catalog
... wls\user_projects\applications\bipdomain\xmlpserver\home\home.jsp --> find <title>
it changes title in http://somehost:7001/xmlpserver/servlet/home -
DW5 - How to list all pages that link to a specific page?
Hi all, I'm using DW5 and need to completely remove a specific page. How can I get DW to check through the whole site and make a list of all other pages that link directly to the page I want to remove?
I'm sure it must be simple, but can't seem to get the result I need. Can someone spare a few minutes to spell it out for me please?I would do a Find on the page name...source code...in the entire local site...and be given a list of pages that include that page name. Then you can go into the Results window, where they are listed, and by double-clicking go directly to each reference.
You may also save a copy of the report in XML... (the save icon is a small floppy disk image on the left border of the Results Panel.
Beth
Maybe you are looking for
-
Help getting data from iTunes onto my New iPad from iPhone backup
Hi for 2 days now I have been trying to sync my New iPad2 with my iPhone 3GS, I have followed lots of threads & advice which has been helpful but its not quite happening for me! I set up iCloud and iTunes as advised, my iPhone & iPad share the same A
-
I replaced my printer with an newer printer. Now itunes Help wants to print to my old printer.How do I change Itunes to print to my new printer?
-
Hi All, I am executing SP by using JDBC Receiver Adapter. My strcture is follows <STATEMENT2> <SP_CREATE_T_BATCH action="EXECUTE"> <spName type="VARCHAR">SP_CREATE_T_BATCH</spName> <IN_Control_Recipe hasQuot="No" type="Integer">100000000001723850</IN
-
How do I get permission to save an Adobe Illustrator template in the templates folder in Windows 8, CS5?
-
I've ordered two 2Gb sticks of ram for my computer and was wondering if there was a tool like Crucial uses to tell which hard drive I could replace my old one with. I have the following: Model Name: MacBook Pro Model Identifier: MacBookPro3,1 Process