Adding servers in to device collection in sccm 2012

When I add a set of servers in to device collection some times some of the servers are failed to add in the collection. Is there any solution for adding the previously failed server again to the device collection successfully?

Right click on collection and go to properties check whether added server is listed there or not? If no try to add the device manually by clicking yellow * button - put in server name ...next next and next very straight forward process.
The first thing you need to do id update the collection after adding the server then only it may reflect. 
What you meant by server get failed to add? Is there any particular error?
Anoop C Nair (My Blog www.AnoopCNair.com)
- Twitter @anoopmannur -
FaceBook Forum For SCCM

Similar Messages

  • How to recover deleted systems in "All Systems" collection in SCCM 2012

    Hi Everyone,
     how to recover deleted systems in "All Systems" collection in SCCM 2012  and also I had one system which is by accidentally deleted, I know the system name, but I cannot able to add the system manually to Device Collections,  is
    there any solution for this...
    I had discovered many systems using discovery, I recovered some systems but not all the systems..
    Please suggest...
    saikumar CH

    just a follow up on Torstens reply. You will see the discovery records show up in the console without having the client installed. That will be corrected when clients perform a hardware inventory re-sync. It all happens automatically, no panic and don't
    reinstall the clients.
    Kent Agerlund | My blogs: blog.coretech.dk/kea and
    SCUG.dk/ | Twitter:
    @Agerlund | Linkedin: Kent Agerlund |
    Mastering ConfigMgr 2012 The Fundamentals

  • Windows 8.1 Mobile Device Management and SCCM 2012 R2 - 'Turn on' option missing

    I am trying to test a virtual desktop with SCCM 2012 R2 integrated with Intune. There is no Configuration Manager client on the workstation, the Intune subscription is configured and enabled for Windows enrolment, AD is synchronizing with Intune, DNS has
    the enrolment record added and resolves, the user can logon to Intune from the client using Internet Explorer and the client has had the registry key added with the DiscoveryService  configured to manage.microsoft.com. The problem is that on
    the 8.1 workstation in Workplace Settings the only option is 'Join' and the 'Turn-on' option is missing. How do I get it to appear?

    Yes I am using an activated version of 8.1 Enterprise, it is in a workgroup and I am logged in as a member of the local Administrator's group but not Administrator. I even joined the domain again and then removed it. Still there is only the 'Join'
    option and no 'Turn on' option. This is driving me nuts.

  • Collection in SCCM 2012 of SCCM 2007 clients?

    Hi,
    I'd need to make a collection of SCCM 2007 clients in SCCM 2012. This way I know which clients need to be updated.
    Can that be done?
    I guess queries can only be run on what sccm 2012 client return on info (I tried a simple query: configuraiton manager client state - version but it only return versions 5.x).
    Pls advise.
    J
    Jan Hoedt

    I'd need to make a collection of SCCM 2007 clients in SCCM 2012. This way I know which clients need to be updated.
    Can that be done?
    Can't you just add the column '(client) version' in the console? Are they displayed then? (Also keep in mind that it's theoretically not possible that CM07 clients can be assigned to a CM12 site)
    Torsten Meringer | http://www.mssccmfaq.de

  • Problem to create an ip range collection on sccm 2012 sp1

    Hi everybody,
    I need to create an ip range query to a collection, i saw a lot of explanations:
    I create this query for the ip range 10.201.0.50 10.201.0.254
    select *
    from  SMS_R_System
    where  IPAddresses like "10.201.0.[5-9][0-9]"
                or IPAddresses like "10.201.0.1[0-9][0-9]"
                or IPAddresses like "10.201.0.2[0-5][0-4]"
    But nothing machines display
    In the general tab it's empty, is it normal?
    thanks guys !!

    Hi,
    Try it like this
    select *
    from  SMS_R_System
    where  IPAddresses like '10.201.0.[5-9][0-9]%'
                or IPAddresses like '10.201.0.1[0-9][0-9]%'
                or IPAddresses like '10.201.0.2[0-5][0-4]%'
    Regards,
    Vahé

  • SSCM 2012 R2 IP Subnet based Device Collection

    HI,
    I have to create a IP Subnet based Device Collection , are we have to install the ccm clients on all machines first to create the IP subnet based Device Collection??
    Can you please share the step by step docs to create the IP Subnet based device collection in SCCM 2012 R2?
    Shailendra Dev

    Hello, As has already been mentioned this will require the SCCM client to be installed on the workstations to pick up the IP address and may require a Hardware Inventory cycle to have been ran (not 100% certain of the HW Inv requirement, give it a try without
    and see!).
    Create the collection as you would normally.
    right click the collection and select properties. Click into the membership rules tab
    select add rule > query rule
    Type a name "IP Subnets" and then click "Edit query statement"
    Click "Show Query language at the bottom and enter the below query making changes to the IP address.
        select *  from  SMS_R_System where SMS_R_System.IPSubnets like "172.16.5%"
    Update the collection membership. Job done.
    I am not sure how whether this information will remain bang up to date e.g. if a machine moves subnets it may not instantaneously update the data in the database regarding IP subnets.

  • Nested Security Groups in Device Collections

    Hi all,
    Is it possible to create a device collection with a dynamic query containing nested Security Groups(Active directory).
    Following is the a sample-
    Security Group 'A' has the following members-
    1) Security Group 'C'
    2) Security Group 'D'
    3) User 'John'
    4) User 'Dave'
    I'm trying to create a device-collection in SCCM 2012 referencing this Security Group 'A' and my intent is to have all members of SG 'C' & 'D' to be part of it along with John & Dave.
    thanks in advance.

    Within ConfigMgr, "Security Group A" will be listed as a Security Group Name with all the direct members of "Security Group A" and the members of "Security Group B" and "Security Group C".
    So, simply querying for "Security Group A" should be sufficient.
    My Blog: http://www.petervanderwoude.nl/
    Follow me on twitter: pvanderwoude

  • Updating Endpoint Protection definitions via SCCM 2012 R2

    I've successfully deployed System Center Endpoint Protection to a device collection using SCCM 2012 R2.  However, the PC Status is "At Risk" because it's out of date.  Can someone please explain how I'm supposed to get the clients to
    update the definition files.  I realized I didn't have "Definition Updates" checked under the Classifications tab of the Software Update Point Components Properties which I've now checked.  I'm not sure which Product to check under the
    Products tab.
    Also not sure what the process is to deploy definition updates to Endpoint clients and have them update automatically with the latest definitions.  Thank You

    You need to check "Forefront Endpoint Protection 2010" as the Product. Yes yes its the old name.
    After that you need to create an ADR using the template Definition Updates under Software Updates and deploy it to a Collection that holds all clients with SCEP installed. The ADR will run directly after each syncronization of the SUP, so you should change
    the SUP to sync to Windows Update at least once every 8 hour (definition updates are released that often).
    Thats the short version.
    Tim Nilimaa | Blog: http://infoworks.tv | Twitter: @timnilimaa

  • SCCM 2012 Security to allow users to add resource to a collection

    Hi,
    I need to permission IT Support staff so they are able to add computers to certain collections in SCCM 2012. I created a new Role and assigned the following permissions under "Collection"
    Read, Modify, Modify Resource, delete resource, read resource, Modify Collection setting, read AMT.
    Also allowed read at site level.
    Users are still unable to add computers to a collection ? Any ideas why ?
    I did read a previous post which said something about also having to permission users to the limiting collection but this doesnt make sense, and sounds insecure.
    Thanks

    Here is a solution that should work for you. Perform this on a test account with only the security role you are going to change for your users in question.
    Create a new collection that is a copy of your collection limiting collection mentioned above.
    Set the limiting collection of this new collection to something other than the limiting collection it defaults to, which is the copied collection.
    Select the collections to which you wish to grant Add Resource permissions to and set their limiting collection to this new collection.
    Within your Administrative user or group properties, specify this new limiting collection and the collections you wish to allow Add Resource permissions under the "Associate assigned security roles with specific security scopes and collections - don't forget
    to add your security scope.
    Apply the changes and test - don't forget to restart the console of your test account.
    This does a couple things - it allows the Add Resource function to the specific collections you wish for the specific Administrative user/group you wish.  It does NOT allow modify on the limiting collection. And it separates the specific collections
    you tag as being modifiable by the specified group.
    We had the same issue in our environment - need a specific group to be able to Add Resource to a single specific collection which was being limited by the All Workstations collection.  Allowing modify to the All Workstations collection allowed modifications
    to any collection limited by All Workstations. So I came up with the solution above, tested against my test accounts and it works as I needed.
    Hopefully this will solve your issue and give you some options going forward.

  • SCCM 2012 R2 + Intune - Android Enrollment issue

    Hi,
    I have an issue enrolling Android devices in our SCCM 2012 R2 in combination with Windows Intune, ADFS & DirSync.
    All devices except Android enroll just fine, are visible in SCCM, get Apps and policies. When I try to enroll my Android devices (tried multiple types and Android versions) I get
    an error after being redirected to the ADFS login page. I get an error stating the page has either moved, been deleted or is not reachable due to connectivity issues. When logging in on portal.manage.microsoft.com everything, including the redirection, works
    fine.
    All prerequisites are in place, the only thing which I haven't added is the Exchange Connector due to an 2007 backend, but afaik this isn't needed for basic Android enrollment
    and management.
    What I do notice is that the Company Portal for Android is redirected to a different URL for ADFS than, for example, my laptop.
    Laptop URL: https://adfs.contoso.com/adfs/ls/?cbcxt=portal&popupui=1&vv=&username=username%40contoso.com&mkt=&lc=9&wfresh=&wa=wsignin1.0&wtrealm=urn:federation:MicrosoftOnline&wctx=wa%3Dwsignin1.0%26wreply%3Dhttps%253a%252f%252fmanage.microsoft.com%252fUISecurityTokenService%252fStsLoginRedirect.aspx%26wctx%3Dhttps%253a%252f%252fm.manage.microsoft.com%252f%26cbcxt%3DPortal%26wp%3DHBI_FED%26popupui%3D1%26lc%3D9%26bk%3D1392111237%26LoginOptions%3D3
    Android Device URL:
    Anyone else had these issues? As I can't seem to find anything related about it online.
    Thanks in advance,
    Br David

    Hi Nick,
    I solved this problem by adding the Root and Intermediate certificates to my ADFS proxy server. It seems, though it's is not very well documented, that Android / Chrome have issues with resolving entire certificate chains, and on top of that there are less
    Trusted Root CA's in both Chrome and Android. This is proven by the fact that iOS and WP8 enrollment worked just fine.
    After adding adding the missing Certs on my ADFS proxy server, and rebooting the machine, everything works as intended.
    Let me know if this solved your problem, if not maybe I have another idea for you.
    Br David
    edit: and ofcourse now I see your answer, so it seems you got your problem fixed. Leaving my answer up here just in case.

  • Driver folders in sccm 2012. are they any use?

    Hi I was wondering if any one can give me there thoughts on whether to use sccm 2012 driver folders
    (not driver packages folders) and if so how.
    In sccm 2007 I could see a purpose because you could create your "os/architecture/manufacturer/model/type of driver" folder structure using search folders and add driver categories to these search folder so you could manage the drivers before adding
    them to the package.
    In sccm 2012 you don't have search folders as such and in most cases the drivers belong to more than one driver model category so moving them into a specific model folder does not make sense.
    As such I cannot see how to use the driver folder except for breaking the drivers up into there type e.g. network, graphics, usb etc.
    Most article I have read only mentioned driver package folders
    Your thoughts are most appreciated.
    Cheers
    Greg Turnbull

    We initially started breaking down all drivers by model and OS. This worked at first, but after the first year or so we started having issues finding drivers in the drivers node because some drivers were applicable to multiple models as well as multiple
    OS.
    For instance, Intel HD graphics for the Lenovo Yoga is also used on the L440 and T540p. It also applies to Win7x64 and Win8x64, so which folder would this driver go into?
    We ended up just moving everything into the root of the node and doing a search.
    One item to note, if you leave everything in the root, it can take a long time to load and search, especially if you add the Supported Platforms column.
    Daniel Ratliff | http://www.PotentEngineer.com

  • SCCM 2012 -OS images not transfering to DP ERROR Detail will be available when server finishes processing the message

    I am having issue with some application, packages, and images pushing from my Primary SCCM server to the secondary servers and DPs.
    I am thinking that the issues are all related so I am going to just talk about the image that I am having a problem with push.
    The image has successfully transfered to the Primary site, and secondary sites, but it is having a problem with a DP. The error that shows up in "Content Status" says "Detail will be available when server finishes processing the
    messages". All the servers are 2008 R2 server, with SCCM 2012 SP1.
    I would take a look at logs for this, but I am pretty new to SCCM, and I'm not sure which log to look at for additional information.
    Thank you for any help that can be provided.

    The logs pointed me to an error about the Pull DP settings. I think the issue is that I have the images stored on the Primary site, and the DP does not have the Primary site in its Pull DP settings tab. I unchecked the option, and it appears to be working
    now. Thank you

  • How to stop Application deployment in sccm 2012?

    Hi All
    If a application is wrongly deployed to wrong collection in sccm 2012
    how to stop that and where to change settings like we used to do in sccm 2007 we can
    stop it by program properties.

    You have kind of the same feature with Applications in CM2012. You can just right-click an Application, and select "Retire".
    That will change the status of the Application from "Active" to "Retired", and should prevent installations. When you've fixed the problem, you can just "Reinstate" the Application again, and everything should be back to normal.
    But I totally agree with Jason. Make sure you do the proper testing, so you won't have to do this at all :-)
    Ronni Pedersen | Microsoft MVP - ConfigMgr | Blogs:
    www.ronnipedersen.com/ and www.SCUG.dk/ | Twitter
    @ronnipedersen

  • Providing limited access to SCCM 2012 R2 console

    Hi All,
    I have enabled Mobile Device support in SCCM 2012 R2. Everything is fine there.
    Now question is if I build this solution for one of our customer and allow them to manage the MDM system.
    Here our company policy says we can't allow full access to SCCM console, if we do, end user may messed up with settings.
    So I am wondering if its possible to step the MDM solution and for the End Customer's administrators provide a subset of the console?
    Or something else .... I don't know if its really possible? May I have an expert advise?
    N.A.Malik

    You did not define "limited" ... Just see
    http://technet.microsoft.com/en-us/library/hh427332.aspx#BKMK_ConfigureRBA about using RBA (role based administration).
    Torsten Meringer | http://www.mssccmfaq.de

  • SCCM 2012 - Export Query Results

    Hi guys, I have a query under "Monitoring" - "Overview" - "Queries" and have my results in the result pane however I want to print the report or export to a CSV file. I cant see an easy way to do this? Surely we dont have to create the query then
    create a report just so we can export or print the report? Information is on my screen and is exactly what I want but no obvious easy way to get this in a format that is usable
    I only see the export MOF option available
    Thanks
    Nick

    I know this is an old post but I see Garth replied a couple days ago - on this same theme I have just upgraded to Office 2013 and the cut and paste from Queries and Collections from SCCM 2012 (which worked fine in Office 2010) seems to now not
    work with my Excel 2013 - you do mention it works for you in your post.  The results I see that I have 4 columns in my results it just pastes them into 1 cell - it doesn't break up the columns.  I have tried pasting to notepad first then to Excel
    - doesn't work - also tried Paste - Special - Unicode Text or Text and still it all goes into one cell. Is there something I have to change with either SCCM or Excel to get this to work again?
    Let me know if you have run into this with Excel 2013....thanks
    Kevin
    I am seeing the same issue.  Win 7/Office 2013 fully patched.
    Edit: Got it to work by pasting into Notepad, saving as .txt and opening that file with Excel.

Maybe you are looking for