Adding third-party SSD drives to Xserve

Has anyone tried this? I would like to buy a new Xserve and migrate to 10.6, but since my application would benefit greatly from SSDs, I would like to buy build an Xserve with a SSD boot drive, and two SSD drives in RAID1. Since Apple doesn't offer SSDs as a drive bay option, has anyone here successfully done it on their own?
...Rene

Yes, I can't see a reason either why a third-party drive (e.g., http://www.plianttechnology.com/lightning_ls.php ) be used. I would just like to hear from someone who has actually done it on a the newer Nehalem Xserves. My application is very database bound (many small, random reads and writes), and I think it would benefit greatly from an SSD.
...Rene

Similar Messages

  • Third Party SSD Drive Modul

    Hi Community,
    is it possible to install a third party SSD (512GB; 3,5") drive modul in a new Mac Pro (build 2011) as system drive?
    Thx & Bye Tom

    The hatter wrote:
    There are lots of fud and misconceptions when it comes to SSDs in particular. 
    There are also more than enough problems with S3 mode (sleep, and hibernation), with firmware, with shipping products too soon to know. Rush to recoup investments and to sell to bleeding edge customers only too happy to beta test for them. 
    Doesn't excuse the lack of TRIM in OS X after more than two years though.  And no,  BGC isn't TRIM and isn't a substitute.  But constantly stirring the pot to add salt to the wounds doesn't help either.
    If I had investment in SSDs and was using OS X I'd want to have SoftRAID 4 as well.
    Sorry I have read your post a few times but I will not be wiser. Maybe you can explain it a bit easier for a none english native speaker ;-)
    But what I understood is your hint for the missing TRIM support in Mac OSX 10.6.x. I had the biggest doubt in the loss of performance when the disc running out of empty space. Yes I know the problem that the disc have to delete marked free segments explicitly before it can use them again and yes I didn't know also, that Mac OSX doesn't support the TRIM command but I spoke to a lot of people who are using SSD modules for a longer period of time and none of them could confirm a decline in performance.
    But the post of Grant Bennet-Alder concerns me more than a loss of performance. Why it is dangerous to clone a normal disk to a SSD module?
    Thx & Bye Tom

  • Installing 3rd party SSD drive in xserve 1,1 (2x2GHz Xeon)

    hi apple, et al.  now that you have discontinued the xserve, will you please tell me how i can use a crucial 128GB SSD in a sonnet adapter in an ADM sled?  i have installed, the xserve will not recognize the ssd.  restart.  nothing.  not in sys profiler, not in disk util, nowhere.  the sled glows orange, then red.  upon restart the sled is green, but still no drive.  unplugging and plugging the sled, back to orangethenred light....
    come on.
    is there a jumper i need to change?  anything i can do here??  this is incredibly frustrating as the only reason this will not work is that you guys have hardcoded the acceptable drive units, right???
    i have no intention of giving up my xserve as it ... ahem, serves all my needs perfectly.  but i would like to upgrade the boot drive to ssd. 
    HOW CAN I DO THIS???????
    thank you very much for any ideas.

    I'm in the same boat. Did you ever get an SSD to work reliably as aboot volume in your 1,1 Xserve?

  • How to install third-party SSD as boot disk in MacPro 5,1

    I had so much trouble with this that I thought I'd post a recipe that others could follow.
    The first thing you should know is that it's not possible to get a non-Apple SSD recognized in a sled slot of a MacPro 5,1.  It just doesn't see them at all, even if (as some suggested) previously partitioned as a GUID partition (which works in a MacBook Pro, but not a MacPro 5,1).  This is true even with the most up-to-date EFI firmware.  You're going to have to use a PCIe adapter card.
    The next thing you should know is that not all PCIe SATA3 SSD adapter cards are bootable on a MacPro 5,1.  For instance, even though the Sonnet Tempo SSD is advertised as working for a boot drive in a Mac Pro, it actually works in any Mac Pro *except* the 5,1.  In a 5,1 drives on the card do not work as boot drives, either with option boot or if you select it as the startup drive after booting from something else.  Also, EFI boot is extended by about a minute -- not the end of the world, but an annoyance.  The Tempo card does work well for add-on drives, its very fast.  I am pretty sure the Tempo Pro variant of the card also does not work, as the Sonnet support guys told me that they have to use use rEFIt for booting 5,1 MacPros in their lab.  I imagine if the Pro worked they would have pointed me at that instead.  (Note that rEFIt has been superseded by rEFInd, http://www.rodsbooks.com/refind/.  I didn't try using rEFIt or rEFInd because I found a better way, but if you want to dual-boot to Linux those utilities are apparently Da Bomb.)
    An Apricorn Velocity x2 Duo card *will* boot, and does not have a long EFI boot delay.  That card is a little more expensive than the Tempo SSD (but not the Tempo Pro SSD) but it works properly.  It's worth the extra money, especially since it's the only card I could find that explicitly claimed to work as a boot drive on a 5,1 MacPro.  And it does.
    One caveat: With the Tempo SSD the SSD drives were invisible until repartitioned in GUID format, which also happens if you try to use a third-party SSD inside a Macbook Pro.  I found that I could repartition one drive, a Crucial MX500 960GB, using a run-of-the-mill USB SATA2 adapter.  Unfortunately this solution did not work with a Samsung Evo 1TB drive, I had to use an external USB3 enclosure.  Moreover, the enclosure supported both FireWire and USB3 but FireWire did not work.  This FireWire issue might be due to the super-cheap enclosure I was using, so YMMV, but keep in mind that it's possible that you'll need either a USB3 expansion card in the MacPro, or a different Mac, to perform the initial repartition to GUID format.
    It's possible that SSDs would be visible on the Velocity card even before repartitioning, I don't know as both of my drives had been repartitioned prior to trying the Velocity.  So, it might work ... but you might need to partition externally.
    I don't know if pre-partitioning is necessary with the Velocity card, as I only ever tried pre-partitioned drives with it.  If you try the Velocity and the drive isn't seen, that's the problem and you'll have to use an external SATA adapter of some sort to repartition before installing on the Velocity card.
    After partitioning the drive and installing on the Velocity card, it worked fine.  Yosemite installed properly and with reboot it blazed.
    Next up, TRIM support.  For some reason known only to Apple, the Apple AHCI driver refuses to enable TRIM support for anything other than Apple drives.  It's possible that there are or were bugs in some of the early SSDs and Apple is just playing it safe, although I would have preferred to have the option to enable TRIM or not if that's the case.  Unfortunately there is no such option, you have to use a substitute AHCI driver.
    Unfortunately if you're using Yosemite you cannot use a substitute driver without disabling kext extensions, because Apple will not sign anyone else's driver (at least not at the time of this writing).  That's unfortunate, I would prefer to have signed extensions if I could, but realistically speaking you're no worse off in terms of security than you were with Mavericks so it's not the end of the world.  With a little luck Apple will either start supporting TRIM on third-party drives or starts signing third-party drivers sometime in the future.
    So: Before you can start TRIMming drives, you first need to run this command, or something like it:
    sudo nvram boot-args=“kext-dev-mode=1”
    I rather like seeing the boot process, rather than just the Apple logo, so I use this:
    sudo nvram boot-args=“-v kext-dev-mode=1”
    I tried both Trim Enabler (http://www.cindori.org/software/trimenabler/) and Chameleon SSD Optimizer (http://chameleon.alessandroboschini.com/).  As of this writing the Chameleon driver is more up-to-date, and comes with some additional utilities that are pretty nice.  Take your pick, though, both worked fine in my experiments.
    With a TRIM-enabled AHCI driver, kext signing disabled, a Velocity card, and your favorite SSD you are in business.
    The only weird thing after all of this is that non-boot SSDs on the Velocity card (or on the Tempo) are ejectable.  As far as I can determine there’s no way to mark them as non-ejectable.  That’s a minor annoyance compared to the performance you get out of the SSD, though.
    Because, with this stuff in there, yowza is the MacPro 5,1 a fast machine.  You Will Like It.  Enjoy!

    Then you should read these.
    http://forums.macrumors.com/showthread.php?t=1804704&highlight=sonnet+tempo+pro
    http://forums.macrumors.com/showthread.php?t=1721573&highlight=sonnet+tempo+pro
    This was strange but has to do with how startup disk and nvram interact
    http://forums.macrumors.com/showthread.php?t=1795765
    I think your problems were solvable and not that the Sonnet card and 5,1 is not bootable, in fact the 5,1 is easier, there are more supported cards.
    I have the 1,1 where the Sonnet Pro is recommended but for data only and are not bootable because of the 32-bit EFI firmware. NOT the 4,1 and 5,1. The 2008's are problem child and have a mix of PCIe 1.1 slots, first implementation of EFI64 that also has problems. Also the 4,1 has two PCIe 2.x slots 3 and 4 that share a controller but that simply limits bandwidth.
    I would have left the TRIM support and NVRAM changes in Yosemite to a separate thread if you wanted to focus on the Sonnet Tempo Pro support in Mac Pro 2010-12 5,1s.
    Also the make of SSD can vary and they also have their own firmware as do bootable controllers along with the EFI of the Mac, all of which have to work together.  Meaning it might be that Samsung 840 va 840 EVO vs 840 Pro will all be slightly different but my experience is Samsungs work well (as do others like Crucial with the proper firmware - and there was/is an issue with the firmware of the Samsung 840 but not with booting).
    The PCIe card gets seen and treated as external and therefore 'eject' but of course you can't when it is the system boot drive.
    One thing I found last week and meant to mention:  After installing or changing PCIe cards, RESET SMC made all the difference in the world with the long boot delay. Some PCIe cards will add a few seconds, system has to search the device tree which now shows another controller with multiple devices - and sometimes NVRAM and SMC are what I will call "dirty" and need to be rebuilt and reset.

  • Upgrading to Yosemite with Third-Party ssd's

    I'm thinking about Upgrading to Yosemite on my mac mini, primarily because I want to update to the latest version of Final Cut X, and this is only supported on Yosemite.
    I put this off long ago because I'm using Third-Party SSD's, and I know that there were issues with this on Yosemite. If possible, I'd like to update now, but I'm not sure if this is a stable system for what I'm using. Here are my current specs below:
    Mac Mini Late 2012
    OS X Version 10.9.5
    Processor 2.5 GHz Intel Core i5
    16GB 1600 MHz DDR3 Memory
    Startup Disk - 2x Crucial M550 256GB SATA in RAID-0
    When I looked into this many months ago, I remember reading that Yosemite doesn't work well with non-apple SSD's, something about trim not working or otherwise. Does anyone know if this can be done now, or if there's a thread with a fix for this? Everything that I can find in searches is from a year ago.
    Any help is greatly appreciated!

    Based on the discussions I've read Yosemite will work on a 3rd party SSD, but as mentioned above, TRIM isn't supported.
    One option is to create a new partition (~30- 50 GB), install the new OS, and ‘test drive’ it. If you like/don’t like it it, you can then remove the partition. Do a backup before you do anything. By doing this, if you don’t like it you won’t have to go though the revert process.
    Check to make sure your applications are compatible.
    Application Compatibility
    Applications Compatibility (2)

  • Recommended third-party SSD brands

    Looking for recommendations for third-party SSD manufacturers to switch from my MBP Mid-2010 13'" internal hard drive. What have been your experiences to switching to a solid-state drive from a Mac originally bought with regular hdd's?

    It will benefit, but not as much because it only has a 3.0 Gb/s bus. You need a 6.0 Gb/s bus to get the maximum capabilities of the SSDs made for that bus. The vendors you mention are all highly reliable.
    Note that if you install it yourself then you lose all future support from Apple.

  • Install Lion over Snow Leopard on third party SSD.

    I am currently running Snow Leopard 10.6.8 on a third party SSD (Intel 510 series), and am using Trim Enabler 1.2.  Everything is running well.
    Regarding installing Lion 10.7.2 on the same SSD drive, I have some questions:  Should I simply install Lion over Snow Leopard, then either switch to Trim Enabler 2.0 beta 4, or use Grant Pannell's tips here http://digitaldj.net/2011/07/21/trim-enabler-for-lion/.  I have read in places that it is best to perform a wipe or some type of reconditioning of an SSD before installing Lion on it.  Thanks for any advice you all may have.

    I would do the following:
    1) buy an external disk enclosure with USB and/or FireWire interface
         http://www.newegg.com/Product/Product.aspx?Item=N82E16817146604
    2) buy a cheap traditional hard disk at least the same size as the SSD or larger
    3) Clone the SSD to the external hard disk inside the enclosure
    4) Download Lion from the App Store and copy the installer to a USB Flash Drive
    4) Delete the partitions on the SSD (don't bother formatting)
    5) Install Lion cleanly with a boot USB Flash Drive
    6) Connect the external disk and use the Migration Assistant to move your data back
    7) Once you are sure all is good (take a few weeks to be sure) then you can format the external disk and use it as a Time Machine drive.  Or use it for other purposes.
    Give it time to index everything with Spotlight.
    That would be the most clean way to upgrade.  Some have been lucky with Lion upgrades but if you have a ton of legacy stuff installed as well as custom tweaks, etc.  Then you are likely to run into issues.  Best to start clean and neat and migrate your data over.  I would even re-install the Apps individually. 
    Make sure you are not running any PowerPC Apps which rely on Rosetta because that won't work in Lion after the upgrade. 

  • How can I install OSX on a new third-party hard drive in my Macbook Pro?

    I'll start off by saying that I bought my MBP (Mid 2009, 13 inch) used two years ago, and the seller never thought to mention that he had installed a third party hard drive not long before selling it to me... First problem.
    Anyway, the hard drive crashed. I'm installing a new hard drive, but I'm worried about getting back to having Mountain Lion. I'm confused by the process - Some say I can start by ordering a retail copy of Snow Leopard on Amazon, some say I need the OS disc that originally came with the computer (which obviously I don't have), and some make it seem as if there's a special version of Snow Leopard I need to order from the Apple store?
    Help.

    There is no special version of Snow Leopard (other than what ships with a Mac of that vintage). There is a regular retail version. It is a good idea to have a copy.
    http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
    After you install the new hard drive boot the computer from the OS disk, and install OS 10.6.
    If you want a more recent OS, sign in to the App Store - use the same ID and password you have used here.
    There you can download Yosemite, it's free.
    I assume your MBP meets the requirements for Yosemite. If it does not, or if you want an earlier OS than 10.10, you should be able to find it at the App store.

  • NI UMI-7772 and third party Stepper Drives

    Dear all
    Now we want to control a stepper motor with voltage ratings up to 110 V and 0.5 A at 110 V 
    we have the 2 Axis PCI-7342 motion controller and the NI UMI-7772 Terminal block for third party motor drives
    please advice , what is the suitable third-party stepper drive that can fullfill the above ratings and compatible with the UMI-7772 ??
    i have found only one link for a company called ParkerMotion (check this link : http://www.parkermotion.com/literature/pdf/aries.pdf ) but I'm not sure if it is compatible with the UMI-7772 or not
    waiting your replies and thanks in advance
    Eng. Mohammed Ashraf
    Certified LabVIEW Associated Developer
    InnoVision Systems Founder, RF Test Development Engineer
    www.ivsystems-eg.com

    Almost any standard stepper or servo drive would be compatable with a UMI.  The Parker Aries you have a link to is a servo drive, not a stepper drive.  You motor ratings are unusual for a stepper motor.  What is the brand and model?  I have had good luck with Applied Motion stepper products.  www.applied-motion.com

  • Where to add Third Party JDBC Driver in SQL Developer 4.1 EA2

    In SQL Developer 4.0.3 under Tools - Preferences - Database there was an option to add a  Third Party JDBC Driver so we could use the same tool for a PostgresSQL database.  I cannot find in in SQL Developer 4.1.0.18

    I think it happened because I imported settings and connections from a previous installation. 
    I removed the C:\Users\username\appdata\SQL Developer\system4.1.0.18.37\ folder.
    I've run it now without that and the option is back.
    Thanks! 

  • Third Party DVD Drive to Install Tiger

    Can a third party DVD drive be used to install Tiger? I have an iBook G3 with a CD ROM drive I would like to install Tiger on.

    I can't tell you, as my D2 DVD burnt out quicker than a candle burning at both ends, but of these...
    http://www.lacie.com/products/range.htm?id=10014
    It'd have to be the one with Firewire at least... just don't know what's happened to LaCie in the last couple of years.
    I'd ask OWC about these...
    http://eshop.macsales.com/item/Other%20World%20Computing/MRBFWU2D115/
    http://eshop.macsales.com/item/Other%20World%20Computing/MRFWU2D115/
    http://eshop.macsales.com/item/EZ%20Quest/K18560/

  • Third-party SSD with Yosemite

    Hi all
    I would like to upgrade my MBP Early 2011 with an SSD. I read different forum posts about TRIM support in 10.10 for third-party SSDs. Can somebody tell me, if there are any SSD I can install without having TRIM disabled. What happens if TRIM is disabled or what does that mean to the performance and the disk itself?
    Thanks for your answer,
    Lukas

    harem-doctor wrote:
    ...What happens if TRIM is disabled or what does that mean to the performance and the disk itself?...
    This link gives a good explanation of what TRIM does and why it's needed on an SSD. In reading it, you'll notice that HD's and SSD's do not function in the same way and TRIM helps to compensate for the difference. These days all SSD's have some form of Garbage Collection built into their controllers but without the assistance of TRIM, they can't tell the difference between valid and deleted data so unnecessary data movement has to take place which decreases performance and increases wear on the SSD.

  • Does adding third party ram void the warranty?

    Will adding third party RAM, like Crucial, void the original Apple warranty or Apple Care warranty extension? Does the latency rate matter? Am adding a second stick of 512 mb ram to new iMac G5 (rev B actually). Is this ram ok for my iMac rev B as a second stick?
    "Crucial 512MB 184-Pin DDR SDRAM DDR 400 (PC 3200) Unbuffered System Memory Model CT6464Z40B"

    Adding third-party RAM to your machine won't void the warranty unless you damage the machine during the installation. That module matches the specifications your iMac calls for.
    (9216)

  • Do i Have to TRIM my Third party SSD on my MacBook Pro 2011?

    Do i have to TRIM my third party SSD on my MBP 2011? I should do it?
    it helps? i like performance this would help get there? what app i should use? im running Mavericks

    This article might give you some inisghts:
    http://www.techspot.com/news/52835-understanding-ssds-the-need-for-trim-overprov isioning-and-more.html
    This is what I use:
    http://www.cindori.org/software/trimenabler/

  • Update to Yosemite on third-party SSD

    Hello,
    I have a Macbook Pro earlies 2009, and I would like to update to Yosemite. I read that there are problems with third-party SSD.
    I had to change my original HD to an Samsung EVO SSD.
    Is this right?
    Thanks in advance,
    Best regards
    Wolfgang

    I use Samsung EVO SSD and no issues.  Just realize you can no longer use Trim Enabler without some risk.  I decided to not use Trim.

Maybe you are looking for