Addional customer data extension in the screen
As u know there are 10 fields in Customer master (addional customer data-central).
Need to add some more values to the screen by including customs fields to kna1.
But how can i make those displayed in the screen?
Apart from adding the additional customer fields in the Include structure of the KNA1 table, further settings has to be done in SPRO.
For example, to add a field KNA1-STCD3 (Tax Code 3) to TCODE XD01,XD02.
SPRO
financial accounting -> Accounts Receivable and Accounts Payable ->
Customer Accounts -> Master Data -> Preparations for Creating Customer
Master Data -> Define Account Groups with Screen Layout (Customers)
select your account group
In the Field status screen, double click on General data
Then double click on Control
Activate Tax number 3
select Change customer (Centrally)
Similar Messages
-
How to Test SSRS Custom Data Extension in TSql
Hi There,
I have created a custom data extenstion for SSRS 2008 Reporting Service.
I can test the CDE in the Report DataSet -> DataSet Properties -> Query Designer -> Run Query.
In the Command Text I pass parameters to the invoked VB code which is of type "BaanstedeCds" then name of my custom data extension.
I can even Attach the Visual Studio VB Code Project that is invoked by the Query Designer an debug the code.
The custom data extension works perfectly in SSRS.
However I have not found a way yet to run BaanstedeCds (with a parametertext) from within SSMS 2008 by using an T-SQL statement!!! Is there a way to use the SSRS Custom Data Extension in Sql Server Management Studio using the dataset type I used in
SSRS 2008?
Because I am leaving the path of using Custom Assemblies in SSMS, for deploying an testing that way is undoable for me.
I is to complicated and in order to properly debug these routines the entire solution of multiple projects is deployed each time even the slightest change has been made to the VB code. Also if I want to deploy from Test to Production it is very hard. I have
to detach the databases etc, ect. Note my previous question about this subject that remained unanswered!!!
Using the Custom Data Extension the problems are a lot less. However I how do I use a routine in the CDS in T-SQL, like I could invoke a routine in the Custom Code Assemblies?
I "hate" CLR routines. I have extreme trouble managing these CLR's as I explained in my post and other posts in the past.
You just cannot build a maagable system that way.
I had to convert all the CLR's (I had a lot of them) to Custom Data Extension Functions, as they do not have all the drawbacks of CLR's.
And using the CDE with all the converted CLR's in it works much better for me in the Report Manager.
However in order to test de CDE I must invoke the CDE in a Windows Form something like this:
Private Sub cmdGetData_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles cmdGetData.Click
Dim CommandText As String = ""
' Get Parameters for CDE GetData
CommandText = txtAdoCds.Text
Dim Rdr As New BstCds.BaanstedeCdsReader(CommandText)
' Invoke GetData Function of CDE Rdr
' Input: CommandText: txtAdoCds.Text = TextBox on TestForm
' Output: DataTable: RdrDataTable
Call Rdr.GetData(CommandText)
If Not Rdr.RdrRetVal Then
GoTo End_Method
End If
' Show DataTable: RdrDataTable (in Excel)
If Not BstOff.ToonTabel(DataTabel:=Rdr.RdrDataTable) Then
Exit Sub
End If
End_Method:
End Sub
'=========================================================================
' File: BaanstedeCdsReader.vb
' Summary: Provides a means of reading one or more forward-only streams
' of result sets obtained by executing a command at a data source,
' and is implemented by Baanstede Data Processing Extensions
' that access BaanstedeIw3-routines.
'=========================================================================
Public Class BaanstedeCdsReader
Implements IDataReader
#Region "Public Variables"
Public RdrRetVal As Boolean = False
Public RdrSqlSel As String = ""
Public RdrDataTable As DataTable = New DataTable
#End Region
#Region "Constructors"
#End Region
#Region "IDataReader Members"
#End Region
' GetData '
#Region "GetData Method"
'==================================================================================================
'We are executing the command using the connection string that connects to the Active Directory.
'Hard coding of the connection string is because it is the same for all the ADs.
'Once we read the data using a DataReader, we place the same in a DataTable so that can be used for
'Other processings.
' Public Sub GetData(ByVal _CommandText As String)
' Output in Public RdrDataTable As DataTable
'==================================================================================================
Public Sub GetData(ByVal _CommandText As String)
' Ophalen Data in DataTabel '
RdrRetVal = False
' Fills RdrDataTable Using _COmmandText
RdrRetVal = True
End Sub
But can I invoke Report Manager Source Type BaanstdeCds's .BaanstedeCdsReader.GetData(CommandText) in TSQL any other way then using CLR ?
Regards Jos
It works, but it does not work (The program runs, but does not produce the desired result)Hi Josje,
Thank you for your question.
I am trying to involve someone more familiar with this topic for a further look at this issue. Sometime delay might be expected from the job transferring. Your patience is greatly appreciated.
Thank you for your understanding and support.
Thanks,
Wendy Fu
Wendy Fu
TechNet Community Support -
How do I add new fields to the 'Customer Data' tab under the BP
I had previously found a screen in the SAP GUI to add fields so that they would show up on the 'Custmer Data' tab under the Business Partner screen. I thought it had been somewhere in se80 but I cannot find it again. Does anyone know where this is? Thank you!
Hi Mark,
You can do this using transaction EEWB. This is the Easy Enhancement Workbench.
within this, you can use the wizard which will guide you through a step by step process to add the fields you need. Basically, there are 2 ways to add new fields :
1. Add new fields - this adds fields to table BUT000, but places the fields on a new tab called 'Customer Data'
2. Add new attributes table - creates a new table and links it to BUT000 using the partner number.
Hope this helps you.
Cheers,
Rishu. -
Modify the text of a data field on the screen
Hi,
I am looking to change the text of a SAP data field on the display screen for an infotype 106. I have the required object key for it. When I entered the key it logged me successfully, however it displayed a message that I am not authroized for changes. Infact as a developer my user profile has the highest authroization level 'SAP_ALL'.
I am looking to modify the module pool MP010600 and screen number 0100 on the infotype screen 106.
It displays the message:
"you have no authroizations for the authroization object 'S_DEVELOP' which would allow you to change the screen'. I checked with the admin guy. He did not have a clue either. Am I missing something?
Any thoughts how to resolve it?
It would be very helpful.
Thanks in advance,
VGThread closed.
-
After I make a call sometimes I need to enter an extension. When I receive certain calls I need to be able to hit a keypad number. The phone screen goes dark in both situations. How do I keep it lit?
It remains dark even when you move the phone away from your ear? Is the proximity sensor covered by a screen protector or case, perhaps?
Try hitting the menu button to see if that lights up the screen so you can enter extensions or respond to prompts. -
Custom Data Extension and Report execution
Hello guys,
I need some help.
On the reports I'm developing I need to call some complex web services. As such, I developed an data extension in C#, which calls code from a dll. In that dll I'm calling the web services I need, and working on the data in order to get the datatables I need
(this dll is also coded in C#).
One requirement I have is for the web services being called only once. This is required as some web services return data for more than one table on the rendered report, and as such, I don't want to get the same data twice.
In order to do this and to be easier to code, I made the classes that call the web services static. The question is if when two users request different reports, I will have problems with shared variables (which are also static) or if reporting services launch
various threads which won't share the same static classes.
ThanksHello,
Thank you for your question.
I am trying to involve someone more familiar with this topic for a further look at this issue. Sometime delay might be expected from the job transferring. Your patience is greatly appreciated.
Thank you for your understanding and support.
Thanks,
Alisa Tang
Alisa Tang
TechNet Community Support -
What is the input "key" in the IMAQ Write Custom Data palette?
Hello!
I am not able to use correctly the IMAQ Write Custom Data palette because I do not know what is the input "key".
Does anyone know its meaning?
Sincerely,
Fábio Machado Cavalcanti
Canada-Brazil Science Without Borders Student
Lakehead University, Thunder Bay, Ontario, Canada
Federal University of Pernambuco (UFPE), Recife, PE, Brazil
Undergraduate Student in Chemical EngineeringThank you for replying Ninad Regundwar!
I agree with this. I have already read this information in the LabView Help.
However, I would like to know what is the "key" specifically. I know that it is a string.
I have written a code to add some acquisition features in a PNG Image File. For this, I have used the following palettes: IMAQ Write File 2 - PNG with Vision Info and IMAQ Write Custom Data.
Afterwards, I have written another code to read the acquisition features from this PNG Image File. For this one, I have used the following palettes: IMAQ Read Image and Vision Information and IMAQ Read Custom Data.
But, when I am reading the acquisition features, an error message appears: "ERROR -1074395723 occurred at IMAQ Read Custom Data - IMAQ Vision: The key you specified cannot be found in the image"
I do not know what I have to put in the input "key". So, I have been trying different values for it: "data", "hello", "13", "56", etc. But, none of these has worked and the same message has appeared.
Does someone know what I have to put in the input "key"? Does someone have an example that shows how to use the palettes: "IMAQ Write Custom Data" and "IMAQ Read Custom Data" correctly?
Sincerely,
Fábio Machado Cavalcanti
Canada-Brazil Science Without Borders Student
Lakehead University, Thunder Bay, Ontario, Canada
Federal University of Pernambuco (UFPE), Recife, PE, Brazil
Undergraduate Student in Chemical Engineering -
Custom Data Link is Lost on Saving the InCopy Document
Hi,
I am creating a custom data link in InCopy CS3 for the story. I am able to successfully create the custom data link in InCopy.
But when I save the InCopy document and re-open it then custom data link is gone and I have the normal data link.
InCopy default behaviour is that when we save the InCopy document then it creates a normal data link.
Does anybody have an idea what should be done to retain the custom data link and normal data link is not created.
Thanks in Advance.
Regards,
Eric WonThanks Dirk.
Yes, I saw that there was some problem with the Script Provider.
I created a new sample project in InCopy and created the custom data links. The custom data link got persisted in incx file which can be viewed by opening it in text editor. I am creating custom data link for stories.
But when I open the InCopy document then my Script Provider gets the call back for creating the links. I created the links as shown in Custom Data Links sample but it doesn't create the link. Instead when I open the document normal data link exists for the story in InCopy.
It seems to be that incx file is getting created correctly becuase when I try to import the incx file in InDesign then it is able to successfully create the custom data links.
Am I missing something or doing something wrong ? any ideas ?
I once gain thank you dirk for helping me out.
Regards,
Eric Won -
Date fields in the Maintainence View.
Hello friends,
I created a maintanence view which of 2 steps. This view contains a DATE field of data element type 'DATS". Now the problem is -"
1. In the first screen of the viewI am not able to see only the DATE field(Over view scr).
2. But I able to see the same field in the 2nd screen(Maintanence Screen).
Not only to my View I maintained ' Table Maintanence Generator" to some more tables.There also I am not able to see the date field in the first screen, unless it is a key field.
Thanks in advance.Hi
Step 1: Create & Maintain Table (SE11)
Screen 101: ABAP Dictionary: Initial Screen
Screen 102: Maintain Table -> Delivery and Maintenance
Screen 103: Maintain Table -> Fields
[] SE11: Enter Table Name -> Create
Enter Table Description (Mandatory Field)
Select Delivery Class
Set maintenance level
Enter Fields, Assign Data Elements
Save Entries
Check Inconsistencies
Activate Table
Go To Technical Settings (SCREEN 104)
Delivery Class: The delivery class controls the transport of table data when
installing or upgrading, in a client copy and when transporting between customer
systems. The delivery class is also used in the extended table
maintenance.
There are the following delivery classes:
A: Application table (master and transaction data).
C: Customer table, data is maintained by the customer only.
L: Table for storing temporary data.
G: Customer table. The customer namespace must be defined in table TRESC. (Use
Report RDDKOR54 here).
E: System table with its own namespaces for customer entries.
S: System table, data changes have the same status as program changes.
W: System table (e.g. table of the development environment) whose
data is transported with its own transport objects (e.g. R3TR PROG, R3TR TABL,
etc.).
Data Browser/Table View Maint.: This indicator specifies
whether it is possible to display/maintain a table or view using the maintenance
tools Data Browser (transaction SE16) and table view maintenance (transactions
SM30 and SM31).
MANDT field is mandatory for Client dependant tables
Technical Settings: The technical settings control, for example, table buffering.
Indexes: To speed up data selection, you can create secondary indexes for the table
Append Structure: Append structures are used for enhancements that are not included in the standard.
Screen 104: Maintain Technical Settings
Select Data Class (Mandatory) [APPL0]
Select Size Category (Table size - No. of records - Mandatory) [1 to 6]
Specify Buffering [allowed / not allowed]
Save
Check Inconsistencies
Activate & Go Back to Maintain Table Screen
Data Class: The data class defines the physical area of the database (for ORACLE
the TABLESPACE) in which your table is logically stored. If you choose a data
class correctly, your table will automatically be assigned to the correct area
when it is created on the database.
The most important data classes
are (other than the system data):
APPL0 Master data
APPL1 Transaction data
APPL2 Organizational and customizing data
Size category: The size category determines the probable space requirement for a table in the database.
Buffering: The buffering status specifies whether or not a table may be buffered.
Screen 105: Maintain Table
Screen 106: Maintain Enhancement Category (ECC 6.0 onwards)
-> Extras -> Enhancement Category
Select Enhancement Category
Enhancement Category: Structures and tables that were defined by SAP in the ABAP
Dictionary can be enhanced subsequently by customers using Customizing includes
or append structures. The enhancements do not only refer to structures/ tables
themselves, but also to dependent structures that adopt the enhancement as an
include or referenced structure. Append structures that only take effect at the
end of the original structure can also cause shifts - in the case of dependent
structures - even within these structures.
Screen 107: Maintain Table -> Table Maintenance Generator
Screen 108: Generate Table Maintenance Dialog: Generation Environment
-> Utilities -> Table Maintenance Generator OR [] SE54
Specify Authorization Group [&NC&]
Select Maintenance type [One Step/Two Step]
Mention Screen Numbers [1/2]
Save & Go Back
Single step: Only overview screen is created i.e. the Table Maintenance Program will have only one screen where you can add, delete or edit records.Two step: Two screens namely the overview screen and Single screen are created. The user can see the key fields in the first screen and can further go on to edit further details. -
Custom File Extension for Microsoft Access Text Driver (*.txt, *.csv)
I'm trying to use a custom file extension for the Microsoft Access Text Driver (*.txt, *.csv) driver.
I have updated the FileExtns registry to have my new extension.
When I issue the following it does not work.
select [NoName]
from openrowset('MSDASQL'
,'Driver={Microsoft Access Text Driver (*.txt, *.csv)};
DefaultDir=c:\filedir'
,'select * from "file.lst"')
If I make the file a .csv it works fine. However, if it has an extension of not CSV or TXT (in this case .lst, which is in the registry setting) extension it throws the following error and cannot seem to find a solution to it.
OLE DB provider "MSDASQL" for linked server "(null)" returned message "[Microsoft][ODBC Text Driver] Cannot update. Database or object is read-only.". Msg 7350, Level 16, State 2, Line 1 Cannot get the column information from
OLE DB provider "MSDASQL" for linked server "(null)".
In addition, (although I can probably find this elsewhere), I need to have the first line 'BLANK' so that it does not miss data (there is no header row). Is there a way to use OPENROWSET without BULK to basically include all rows as data?
Any help is appreciated.Hi,
According to your description, I did a test with your script, and got the same message as your post. Usually, by default, the Microsoft Access Text Driver (*.txt, *.csv) supports the four extensions file, such as *.asc, *.csv, *.tab, *.txt. To solve this issue,
I recommend you try to save the LST file in the above format, then use OPENROESET to get data from the supported extensions file in SQL Server.
In addition, the
OPENROWSET function is mainly used to retrieve remote data from an OLEDB data source, when you use OPENROWSET without BULK, provider_name is a necessary parameter in the script. However, the OPENROWSET (BULK...) is mainly called from a SELECT…FROM clause
within an INSERT statement, when importing bulk data from a data file into SQL Server table. Thus if you need to import bulk data, you should use the basic syntax: INSERT ... SELECT * FROM OPENROWSET(BULK...), also there are some alternatives, such as
BULK INSERT
and
BCP .
Thanks
Lydia Zhang -
Creating radio buttons and text box in the screen
Hi Guys,
Need help asap. I am writing a report and I have to create text box for user to input GL account numbers for two types of customer. I have to make these fields required and take the data back from the screen and write it in a file. The second thing that I have to do is to make radio buttons for the user to select whether he wants the file written on the application server or the presentation server. and process the report accordingly. Now can somebody please given some code and tell me how I should do this. Both the things have to be done for the same report. Please help.
Thanks,
MinalHi,
TABLES: likp,
lips.
TYPES: Begin of ty_likp,
vbeln like likp-vbeln,
end of ty_likp.
TYPES: Begin of ty_lips,
vbeln like lips-vbeln,
posnr like lips-posnr,
end of ty_lips.
DATA: i_likp TYPE STANDARD TABLE OF ty_likp,
i_lips TYPE STANDARD TABLE OF ty_lips,
w_lips TYPE ty_lips,
w_likp TYPE ty_likp.
SELECTION-SCREEN BEGIN OF BLOCK b_0 WITH FRAME TITLE text-001.
SELECT-OPTIONS: s_delno FOR likp-vbeln,
s_type FOR likp-lfart,
s_ship FOR likp-vstel,
s_date FOR likp-erdat.
SELECTION-SCREEN END OF BLOCK b_0.
SELECT vbeln
FROM likp INTO TABLE i_likp
WHERE vbeln IN s_delno
AND lfart IN s_type
AND vstel IN s_ship
AND erdat IN s_date.
IF sy-subrc <> 0.
MESSAGE i000 WITH text-002.
" No valid deliveries for the selection parameters entered.
STOP.
ENDIF.
IF NOT i_likp[] IS INITIAL.
SELECT vbeln
posnr
FROM lips INTO TABLE i_lips
FOR ALL ENTRIES IN i_likp
WHERE vbeln = i_likp-vbeln.
ENDIF.
format color 1 on intensified on.
WRITE: /01(46) 'Following are the Hanging Deliveries/Invoices:'.
format color off intensified off.
skip.
format color 1 on.
WRITE: SY-ULINE(27).
WRITE: /1 SY-VLINE,
3(12) 'Document No.',
16 SY-VLINE,
17(8) 'Item No.',
27 SY-VLINE.
write:/1 sy-ULINE(27).
format color off.
sort i_lips by vbeln posnr.
LOOP AT i_lips INTO w_lips.
Read table i_likp into w_likp with key
vbeln = w_lips-vbeln
posnn = w_lips-posnr.
if sy-subrc <> 0.
format color 2 on.
WRITE: /1 sy-vline,
3(12) w_lips-vbeln,
16 sy-vline,
17(8) w_lips-posnr,
27 sy-vline.
write:/1 sy-uline(27).
format color off.
clear w_lips.
endif.
ENDLOOP.
Try this one with ur own example.
Thanks & Regards,
Judith. -
How to create Customer data TAB in PO -ME23N
Can anyone tell me how to add 'Customer data' TAB in the PO heade TABSTRIP. I have to add it in the header besides 'Status' TAB.
I know an enhancement 'MM06E005' which is used for this purpose.
Thanks
SMSHi
see this sample doc and do it accordingly
by creating a project in CMOD and assigning the Enhancment MM06E005 and writing the code in the respective screen
How to implement screen exit for a SAP standard transaction
Introduction
SAP provides standard transactions to enter data into database. But a client may want to maintain some additional information in SAP other than what is provided.
To make provisions for this, additional screens have to be provided and additional fields must be added into appropriate database table.
To pave way for this, SAP has provided the option for screen exits. Usually, SAP provides the following:
An append structure in the database table with the new fields.
A subscreen area into the standard screen where the programmer can attach his subscreen of his own program with the new fields.
A function group under which the new subscreen has to be created with the new fields.
Function exits to synchronize the PBO and PAI of the standard SAP program with the PBO and PAI of the subscreen so that data can flow back and forth between the standard SAP program and the program written by the developer for the subscreen. These function modules also exist in the same function group under which the subscreen will have to be developed.
Finally, a linkage has to be done between the subscreen area of standard SAP screen with the custom subscreen constructed by the developer.
Typically, SAP provides an enhancement in which the developer can create an append structure, use the function exits to synchronize the PBO and PAI of the standard SAP program and the custom subscreen program, and make the necessary linking( as mentioned above in step 4. But, again, this is not a hard and fast rule. Linking in some case, is also done by configurations.) SAP also usually provides the name of the function group under which the subscreen has to be developed.
Necessary guidance about implementing a screen exit development is usually available in the Documentation section of the enhancement ( can be availed by transaction SMOD).
Pre-Requisites
The developer to work on screen exit should have essential knowledge on the following:
DDIC concepts, including the knowledge of append structure.
Concept of SAP Enhancements and implementing them using Projects.
Concept of function exits.
Knowledge on Module Pool including subscreens, Tabstrip controls etc.
Steps
Guidelines
So, a developer can follow the guidelines mentioned below to implement a screen exit to a standard SAP transaction, as and when required:
Find out the Required Enhancements
Go to SMOD. Press F4 in the Enhancement field. In the next popup window, click pushbutton SAP Applications. A list will appear that contains information on all the enhancements, categorized under functional areas. Developer must search for the enhancements relevant to his functional area of interest for e.g., Purchasing, Asset Accounting, etc.
Note down the enhancements. Then, come to the initial screen of SMOD and view the documentation of each enhancement to find out which one is required for your development.
Utilize the Enhancement in a Project
After you have found one, do as directed in the documentation. Generally, the steps are as follows:
Create a project using CMOD including your enhancement.
Create the append structure with new fields.
Go to the desired function group and create a subscreen with the new fields. Write PBO and PAI for the subscreen, if required.
Use the function exits in the enhancement to link the PBO and PAI of the subscreen with that of the main SAP program supporting the SAP transaction.
Maintain necessary linkage between the subscreen area of standard SAP program with the custom subscreen developed along with the custom program name. This can be done in the project (developed by CMOD including the enhancement) or outside as a part of configuration.
Activate the project.
Test to ensure that required functionality are met.
Case Study 1
Add three new custom fields for Asset master and maintain information for them
Requirement
Three fields in the legacy system have to be maintained in Asset master. These fields are:
Original Asset number 20 characters
Location 2 15 Characters.
Model no 20 characters
Location 2 should start with L.
Pre-Analysis
Finding out the Enhancement
As described above, the enhancement is determined. It was found, that enhancement AIST0002 will serve the purpose. It contains the following components (can be viewed by transaction SMOD):
Exit Type Description EXIT_SAPL1022_001 Function Exit Check of User-Defined Fields when Using Create and Change BAPI EXIT_SAPLAIST_002 Function Exit Transfer Data for User Subscreens in PBO. EXIT_SAPLAIST_003 Function Exit Transfer of User-Defined Fields to SAP Master Data Transactions CI_ANLU Customizing Include Include structure to add new fields
Studying the Function Exits
The function module level documentation for the function exits are then viewed from transaction SE37. The documentation clearly laid out for the purpose for their use:
EXIT_SAPLAIST_002
Function module Level Documentation
This function module is called by asset master data maintenance at the start of the dialog. (When changing, it is called after reading of the data from the database; when creating it is called after the transfer of the default values from the asset class and reference asset.) The purpose of the function module is to enable this function group to recognize the master data. For interpreting or controlling master data fields that are important for user fields, it is possible to transfer to global variables at this point, so that they can be recognized when the user subscreens are processed.
Import Parameters
Understanding
This function module is called at the PBO to pass the information retrieved from the database to pass them to the custom subscreen and its underlying program. Import parameter : I_ANLU will be populated with the values for user-defined fields which will be passed to the subscreen program. So, there must be some sort of variable assignment from I_ANLU.
EXIT_SAPLAIST_003
Function module Documentation: This function module is called by SAP asset master data maintenance after the screens are processed, but before saving. The purpose of the function module is to transfer fields entered on user sub-screens of SAP asset data maintenance to the database for updating. The export parameter for this function module is:
Understanding
This function module will be used to transfer the user entered data in the subscreen fields to the main SAP program, which will then be saved into the database.
Studying the Documentation of the Enhancement
The enhancement documentation (as is viewed from the initial screen of SMOD] also supports the idea. Moreover, it informs that we need to develop a subscreen under function group XAIS. This is the function group under which the two function exit modules also exist. So, if the custom subscreen refers to the global data of the function group XAIS, then those values will also be available to these function exits as well.
Going to SE80 and viewing the function group XAIS helps us to inform that there are three DDIC tables declared for it:
Deciding the Final course of Action
After making all the investigations, the final course of action was determined.
SrlNo Step Justification
A project has to be created using transaction CMOD where the enhancement AIST0002 will be included.
Customizing include CI_ANLU has to be created with the custom fields demanded When CI_ANLU will be developed, the custom fields will get appended to the database table ANLU. Also, these fields will be used to create screen fields in the new subscreen.
A custom subscreen, say, 9000 will be developed under function group XAIS. The screen group for the screen will be CUST (or any name). The three custom fields added to table ANLU (by creating CI_ANLU) will be used to create new fields in the screen.
In the PAI of the subscreen, validation for Location to start with L will be added. The subscreen with three new fields has to be developed so that it can be attached to a subscreen area of the asset master screens.
In the custom include of the function exit module EXIT_SAPLAIST_002, the following code will be written:-
ANLU = I_ANLU. I_ANLU is the import parameter of this FM. The value is assigned to the global variable ANLU, referring which the three new subscreen fields are developed. So, data retrieved from database table ANLU will be passed to this FM as I_ANLU by the standard SAP main program. The value will be taken and passed to the global variable of the function group XAIS, so that the three custom fields (referring to ANLU of XAIS) get populated.
In the custom include of the function exit module EXIT_SAPLAIST_003, the following code will be written:-
E_ANLU = ANLU. The changed values in the subscreen fields exist in global variable ANLU for the function group XAIS. This function exit module will pass the data back to the SAP main program as E_ANLU.
Proper linkage/configuration has to be done so that the new subscreens get linked to the appropriate subscreen area of the Asset master screen. This has to be done otherwise, the new custom subscreen will not be displayed in the Asset master screens.
Development
Creating a Project to include the enhancement
Go to transaction CMOD and create a project.
Enter a description for the project. Then, click on the pushbutton Enhancement Assignments in the Application Toolbar.
Enter the name of the enhancement and Save.
Go to Components.
Creating Custom Include for ANLU
The screen shown below will appear, showing all the enhancement components under the assignment AIST0002. Double-click on the name of the Include Structure to create it.
Create the include structure with three new fields, as required. Then, save and activate it.
Develop the subscreen and the program
Go to transaction SE80. For the function group XAIS, create a new subscreen 9000.
Create it as subscreen.
Then, go to the Layout of the screen and create three new fields from Database table ANLU.
Drag the fields in the screen body and place them.
Then, save and activate the screen and come back to screen flow editor.
Create the PAI module to add validation for field Location 2, as required .
Activate the whole function group and come out.
Write code in the Function Exits to synchronize the programs
Now, code has to be written in the function modules EXIT_SAPLAIST_002 and EXIT_SAPLAIST_003 so that data flows to and fro between the main SAP program and custom subscreen program. For that, go back to transaction CMOD and change the function exits.
Write code in the function module EXIT_SAPLAIST_002 called once at the beginning of the transaction:
Write code in EXIT_SAPLAIST_003 to pass the data from the subscreen to SAP main program.
Then, activate everything the whole project and come out.
Complete the configuration to link the subscreen
The development portion is complete. Now, linking of the subscreen has to be done with the subscreen area of the main program. In most of the cases, this linking can be done in the enhancement itself. But, here, requirement is a bit different. It is done by configuration using SPRO.
Assets are created under Asset class. And for each asset class, there is a layout assigned to it. For a layout, there are multiple tab pages assigned to it. And, for each tab page, there are multiple screen groups/field groups assigned.
Here, the requirement is to create these three custom fields in the tab page General of asset master screen ( AS01/AS02/AS03/AS91).
Determine the Layout
To achieve this, first of all, we need to find out which layout is assigned to asset class 1000.For that, go to transaction AOLK( information has to be obtained from functional consultant).Select the Asset Class 1000 and click on folder General Assignment of Layout.
Here, for Asset class 1000, for all the user groups, tab layout SAP is assigned. Since layout SAP cannot be changed, it has to be copied and manipulated to include our screen group. Later, the new layout has to be assigned over here.
Create new tab layout
Go to transaction AOLA. Copy the tab layout SAP to create another layout, say, YSUB.
System will copy all the settings and will inform you about that.
Select your newly created layout and double-click on the folder Tab page titles.
You want to put your custom fields in the tab page General. So, select this tab page entry and double-click on the folder "Position of Groups".
Here, all the field groups currently residing in the tab-page General are shown. Add an entry for your newly created fields.
Select the group box from the list. An entry will come with U padded with the custom subscreen prepared by you.
Then, save and come out.
Assign the new Layout to Asset Class
Now, go to tcode AOLK and assign tab layout YSUB for asset class 1000.
Save and come out.
Test the Exit
Everything is over. Now, go to transaction code AS01/02/03 or AS91 to deal with an asset of asset class 1000. You will see your new fields added to the screen. Add values to them save. Then, enter into the tcodes again to see whether the values entered by you are being displayed or not.
Original Source: ittoolbox.com
Regards
Anji -
No Data in Reports Details in Custom date range
Hello, iTunes U Public Site Manager Admins.
As the iTunes U Public Site Manager admin, I've been trying to access our institution's iTunes U Reports Details for a couple of days. (I send a monthly report of usage to our course/collection contributors.) When I custom the date range, under Details, there is zero entry; "No data available in table" message is shown.
This feature had been working well since Apple iTunes U added this enhancement on August 13, 2013. The report Details showed the exact stats for Browse, Subscribe, Download, Stream, and Enclosure for each course/collection in the custom date range.
Now under "Details", the data is shown only when the date range is Last 30 Days. It shows no data in custom date range when the Calendar is used to select a Start Date and End Date.
Has anyone else noticed this problem?
Thanks.
Q. WangErik.
I used your suggestion and it worked very well. This is how I did it.
Export the range of data that includes Feb. 1-Feb. 28, 2014 as .tsv file.
Open that file in Excel.
Add a blank column next to the Date column. Use function =Month() to just extract the month into the new column. Fill down the whole column. Then copy and paste special (value) into the same column (I have over 26,000 rows of data in the file.) Converting to Value will allow for the next step of PivotTable.
Create a PivotTable for the 26,000 rows of data. Use Month as the Report filter, iTunes_ID as the Row Labels, Select Browse, Subscribe, etc. as the Sum Values. (The result is a summary table with about 200 rows.)
I then do a Vlookup to my premade Master file to add Category (course, collection, resources) and Instructor Name to each of the 200 rows.
That will do it for my monthly report.
Thanks for your tip again. I did not know the .tsv file would have DATE for each item.
Sincerely,
Q. Wang -
Hi, I have had my ipad air for about a month. The other day I took it out of its cover and it was splintered from the top with downward cracks. It is new and under warranty so I rang the support team. They told me that it would cost about €120 but could be repaired on the spot and they made me an appointment at the local genius bar. I got there and they told me that I had dropped it or banged it or something. I said I had not, they insisted that I must have done. I repeated several times that I had not - it was obvious they did not believe me, they said I must have done. They then told me they never repaired or replaced broken glass in any ipads, that the man on the 'Support' had been wrong. They always replaced the whole ipad at a cost of €300. I was devastated at not being believed and at the amount of money they were asking for. I left and rang the support again. I was told their system was down but to call on monday to get a quote for the reparation, I could send it to my home insurance company and they would undoubtedly cover the repair. I asked how long this was all going to take because, I was in the middle of a big project and this was taking up my time, and also I needed the ipad for my work. They told me it would be done in a minute. I rang on the Monday and I was told it would take up to 5 days to send but probably it would arrive sooner (it is now thursday, I have received nothing). I then rang my household insurance, a big company - and they told me they had never heard of such a cover. I asked if this was because I had a very basic policy, they said, no it wasn't that - I didn't have a basic policy I had quite thorough policy, but they didn't know of a policy in any comany that would cover this sort of damage. I was stunned - yet again I had been given false information and false hope by apple. Yet again I was let down. I then decided to do a further investigation on the internet and discovered a long trail of comments on Apple Forum of people who have also had splintering and cracking of the ipad air glass for no reason whatsoever. Some have commented that the glass could be thinner in order to reduce the weight, some have said that the splintering could be caused by a weakness in the casing at the top where it is plastic (the ones that take sims) that might make it more flexible and therefore liable to crack.
All of the posts and complaints on the apple forum and elsewhere seem to point to a design fault. However throughout all this I have been mislead by apple support staff constantly who all say different things, I have virtually been accused of lying by denying that my ipad received any kind of impact by apple staff and I have been left feeling incredibly frustrated and upset by the total lack of any kind of real help by Apple. All this despite being acomplet apple user in my business for the last 25 years, where I have never come across this attitude towards me as a customer before.
When the screen on my iphone broke, it was because I fell in the street while I was talking on the telephone, it flew out of my hand and smashed on the pavement. I was rolling around in agony, while my son was holding up the smashed telephone wailing 'Mama, you've smashed your iphone!!!' This of course, I blamed on noone but myself - it broke because it fell, I paid an arm and a leg without protest to get it repaired.
This is not the case with my new ipad air. It has splintered for no good reason at all - and noone at Apple seems to want to help me or to care!
I would really appreciate it if someone could tell me if there is anything else I can do to ge this matter resolved?If it was a refurb replacing one that was under warranty, the warrany is good until the original warranty expires or 90 days from replacement, whichever is longer. In either event, it should still be covered if you've only had it for a month. (assuming you're in the US here). You can try to restore it as a NEW device rather than restoring from your backup, but this sounds like a hardware failure... I think. I'm not sure what you mean by "the top half of the screen slides". If you mean only the top half is touch sensitive, how can you determine that? You wouldn't be able to slide to unlock if that were the case...
Sorry, I'm a little confused by that description. -
Date Extension on Crystal Output Filename in Scheduler
Post Author: mek
CA Forum: General
We use Crystal Reports 10. When we schedule reports through the CMC scheduler we add the date to the output filename by selecting the DateTime option from the variable properties list ( ex. ExpoSalesSummaryReport_%DateTime%.xls generates a file named ExpoSalesSummaryReport_2007-04-25-10-46-33.xls). The date format that is automatically concatenated onto the filename by Crystal is not what we need. We do not want the time in the date extension and we want the date format simplified, without dashes.
Our team needs to have additional values available in the variable properties list of the report scheduler that would allow us to select a specific date format to be concatenated to the filename when we schedule reports. For example, we would like to have the following selections in the picklist (new options that we want to add and use are bolded), ex:
Title
ID
Owner
DateTime
FileExtension
DateMMDDYY
DateMMDDYYYY
DateMONDDYY
DateMONDDYYYY
Is it possible to create new parameters for the scheduler picklist that can add a date extension to the filename in the format we want? I would think that there must be some way to customize the file extension mask behind the scenes in Crystal 10.
Thanks in advance for your help.Hi Raafje,
Like I've already discussed in my Blog ,Using Date Expressions on Filenames of Burst Query has its own limitations. This date expression that you have tried for sysdate-1 (%d-1%m%y) will not hold good to the requirement. Anyways you can resolve the issue using other work arounds.
Method I (Using CAST and DATE Functions)
1.Previous Day -> CAST(DAYOFMONTH(TIMESTAMPADD(SQL_TSI_DAY, -1, CURRENT_DATE)) AS CHAR)
2.Month of Previous Day -> CAST(MONTH(TIMESTAMPADD(SQL_TSI_DAY, -1, CURRENT_DATE ) ) AS CHAR)
3.Year of Previous Day -> CAST(YEAR(TIMESTAMPADD(SQL_TSI_DAY, -1, CURRENT_DATE)) AS CHAR)
Sample Code
+'ReportName'||'-'||CAST( DAYOFMONTH(TIMESTAMPADD(SQL_TSI_DAY, -1, CURRENT_DATE)) AS CHAR)||'-'||CAST(MONTH(TIMESTAMPADD(SQL_TSI_DAY, -1, CURRENT_DATE ) ) AS CHAR)||'-'||CAST( YEAR(TIMESTAMPADD(SQL_TSI_DAY, -1, CURRENT_DATE)) AS CHAR)||'.pdf'+
Method II (Using Server Variables)
1. Create a Dynamic Repository Variable like Previous_Date(Non-System Session variables can also be used)
2. Create a Initialization blocks
In Data Source Section - Edit Data Source and place the below query
Select TO_CHAR(SYSDATE-1,'MM/DD/YYYY')
FROM Dual (you can use any date format as required)
3. In Variable Target Section
Edit Target -
Give the Name as Previous_Date (as you created in Step1) and Enable the Radio Button as Dynamic
Place date in Default Value like '9/22/2010'
4. Now use this Repository Variable in the filename parameter of the burst query as VALUEOF("Previous_Date") for Repository Variable
and VALUEOF(NQ_SESSION.Previous_Date) in case you have created a session variable for the query
Thanks & Regards,
Goushalya
http://obiee-bip.blogspot.com/2010/05/dynamic-delivery-file-naming-in-bi.html
Edited by: Goushalya on Sep 29, 2011 7:09 AM
Maybe you are looking for
-
How can i move pictures from my ipad to a SD card?
I have the adapter for the sd card and i can load on to the ipad. But i would like to load from the ipad to the SD card with out having to load the photos on to my computer. Is this possible?
-
Sellers can use eBay's image system to display their items, or use a 3rd-party that allows more and large images to be displayed directly within the description of the item. With this problem, the resulting listings are also completely messed up beca
-
Overriding a javascript delivered function but then calling the original
I have a tabular form (updateable report) and am on Apex 3.2. On this particular form, I have the updateable report set to "partial page refresh = yes". When doing so, it appears to want to call a javascript function called $a_report to paginate from
-
I lost my ipod and i didnt have find my iphone on what do i do?
HElp
-
User Exit when notification completeion
Hello Experts, I need to make a validation at the time a PM notification is complete, like IWO10004/EXIT_SAPLCOIH_004 at order completion. Does anybody has an idea if SAP has that functionality? If yes - what's the name of the function? Regards, Avi