Addition of New KF in SNP PA  (SCM 7.0)

Dear All,
      When we need to add a new key figure in SNP planning are we need to deactivate the planning area, add the new key figure and activate the planning area. But I heard that in SCM 7.0 we can add the new key figures without deactivating the planning area. Please let me know is that possible? If so how can I do it?
Thanks,
Siva.

Hi Siva,
In transaction /sapapo/msdp_admin, select the planning area
and right click on it, and click on change key figure settings,
then it will take you to change mode, wherein you need to go
to append mode and do the changes.
I would suggest, please carry out the changes in testing
environment and test thoroughly and if successful, transport
the changes to production environment to avoid any com
errors or loss of data
Regards
R. Senthil mareeswaran.

Similar Messages

  • Impact of Addition of New Value Fields in the existing Op. Concern-COPA

    Hi All,
    Want to know the steps of adding new value fields in the existing operating concern in COPA?
    What is the overall impact of addition of New Value fields in the running Operating Concern?
    How do we test the addition of new value fields?
    Is the addition of New Value fields to the running Operating Concern advisable?
    Your support and advice is highly anticipated and appreciated.
    Thanks & Regards
    9819528669
    Ohter details are as follows...
    VALUE FIELDS : Defines the Structure of your Costs & Revenues. (Op. Concern 120 Value Fields) 
    1)     The client requires three new value fields to be created. Value fields for :
    -     Other Airport Charges - International
    -     Cargo Commission Cost
    -     Personal Cost (Direct)
    2)     What are the Steps involved in creation of new value fields? The steps are :
    1)     Before creating new value field we need to check whether we can use already existing UNUSED value fields (There are 62 value fields created for the op concern 1000, in production the value fields TBUL1-L7 i.e. to be used (I assume) screen shot1 provided. My predecessor has used value field VV291, VV292, VV380 original description being TBUL3, TBUL4, and TBUL1. I believe he has changed the description in development client and created a transport request ref screen shot 2)
    2)     You can create new value field thru T-Code KEA6 (4-5 characters beginning with VV) u2013 My predecessor has reused the value fields originally created he has not created new one I believe. please provide give your comments)
    3)     Specify whether this field is for Currency or Quantity (currency defined in attribute of op concern and quantity defined by its own field u2013 unit of measure) u2013 My predecessor has configured the three value fields as Currency.
    4)     Describe how the values in this field are aggregated over characteristics. (SUM, LAS, AVG) u2013 My predecessor has aggregated all the three value fields as SUM and they are in Active status.
    5)     After the value field is created you have to add the value field (active status only) to the operating concern by Editing the Data Structure. (I guess this is done in the next step)
    6)     Assign newly created Value fields to the Operating Concern u2013 T-Code KEA0 (In development client the value fields are assigned to the op concern 1000 refer screen shot 3. In the production client also those three value fields exist (does it mean they are assigned? your comments please.) As they have the original description TBUL3, TBUL4, and TBUL1 refer screen shot 4.
    7)     After the Data Structure is defined you need to activate them. (creates plan vs actual database) u2013 Go to the data structure tab and Choose Activate. The status in dev client is Active with correct description but in the production client it is Active with the OLD description. After addition of the value field you need to regenerate the operating concern. T-Code KEA0 u2013 right?
    8)     Condition Types are assigned to Value Fields? Donu2019t know u2013 T-Code KE45 (I think this is NOT required in our case u2013 Please give your comments)
    9)     Define and Assign Valuation Strategy u2013 Cost assigned to Value fields u2013 T-Code KE4U (I think this is also NOT required in our case)
    10)     Define PA Transfer Structure for Settlement u2013 T-Code KEI1 (This step is crucial u2013 I think I have to to include newly created value fields, but am not aware how to do it and what is the connectivity or what happens after this is done)
    Note: My predecessor has created a Transport Request No# KEDK902167 for the value fields created by him.
    3)     Whether my predecessor has performed all the steps for value field creation? How to test it and check that?
    4)     If yes then,  Do I need to perform additional configuration or can I proceed to transport it to Production?
    5)     What is COPA Allocation Structure & PA Transfer Structure? Where and Why It is used?
    6)     What are the different methods of cost and revenue allocations in SAP?
    7)     I have checked the status of the value fields across clients, It is as followsu2026
         Value Field     Value Field For     Description     Development      Quality     Production
    1     VV291     Other Airport Charges International     TBUL3     Exists      DNE     DNE
    2     VV292     Cargo Commission Cost     TBUL4     Exists      DNE     DNE
    3     VV380     Personal Cost u2013 Direct     TBUL1     Exists      DNE     DNE
    #DNE : Does Not Exist (assumed since the description given to value field is not the same as in development client.)

    HI sree,
    ofter creation value field and saving that time reqwest number appeare copy the reqwest number and go through the se01 select that reqwest number select and transport click the truck symbole, and draft a mail to basis guyw.
    Thank You!
    Best Regards,
    pradheep.

  • Addition of New Fields to CG36VEN Transaction - Import of Vendor MSDS

    Hi Guys,
    I have a business requirement for addition of New fields (text field and check box) in the CG36VEN transaction (Import vendor MSDS) in SAP EHS.
    (Something like in the attached screenshot )
    Are there any User Exits/Enhancements points available for the same? (we tried checking but couldn't find any).
    If no, should we copy the function group into a custom function group and make the changes?
    Please suggest the best way forward. any pointer are really appreciated.
    Regards,
    Gaurish Dessai

    Dear Gaurish
    if you check the normal process to upload "pdf" files using SAP standard import you are able to create additional data (using a SAP standard class; but you can change that using a custom specific class) by standard without the need to "modify" screens etc. . I would prefer to do the upload in a "document" class and not to ESTDH as the use of a class is standard; but yes you can use append fields in ETSDH (or use custom driven own table); In e.g. DOC-X and similar interfaces you can download then the data from the class (e.g. as in your case for "reuse" in a different data base). PLease check SAP online help or the many threads which are related to the topic of "mass bulk download of pdf SDS/MSDS files (e.g. Bulk MSDS Download))
    The "correct" (best solution depending on the real customer needs) solution depends a little bit on your further use of the "on top" data which you would like to upload (and the potential risk that after e.g. 6 months user would like to get a third, fourth etc. checkbox inthe screen).
    E.g. the two check boxes could be implemented as "identifiers". The "pro" of this solution is this:
    a.) you can execute easily inquiries in EHS database
    b.) you can extract the identifiers easily (e.g. as part of an output variant or other similar options (combination of ALE with XI/PI)
    Second option: you can generate an own EHS class as part of the property tree; then you can use as well inquiry options (and ALE or other options to download the data).
    As mentioned before: the "best" option (near to the SAP standard) is to use a customer exit in Cg50 (check e.g. Customer Exits in SAP EHS MANAGEMENT
    and these two exits as mentioned there:
    C1G20001
    EHS: Menu exit 1: Report management
    Yes
    C1G20002
    EHS: Menu exit 2: Report management
    Yes
    One "disadvantage" of the transaction CG36VEN is that you can upload only one document in one run. Using the exists as mentioned you can generate a more "user friedly" option to do mass uploads as well (based e.g. on key files (similar to the "Standard option" but more user friendly)..
    Using this option you are as well flexible to use own customer document classes (e.g. you can/could define per "document type" one class; e.g. for REACH exposure scenarios you can use a different class in comparison to SDS upload.
    A well known shortfall of transaction CG50/CG54 is the limitation in the available search options. You could not select reports based on the "check" boxes in your screen (therefore if you use "append" fields for ESTDH there is very limited option available to sue an inquiry standard SAP function to select reports of a specific type)
    Therefore in most cases it is better to change your process or your approach (how you would like to store the data); e.g. to store the check boxes data on spec level (e.g. as identifier) and then by using CG02 "switch" to CG54/CG50 transaction (which is now easily possible) to check the reports (and content of the reports).
    C.B.

  • Photoshop CC: I have currently Photoshop CC running on my desktop pc, now I am thinking of buying additionally a new laptop or macbook to work out of the house on my pictures. Can I use my current CC membership to install photoshop CC as well on the lapto

    I have currently Photoshop CC running on my desktop pc, now I am thinking of buying additionally a new laptop or macbook to work out of the house on my pictures. Can I use my current CC membership to install photoshop CC as well on the laptop? with a macbook I have to buy a new license? how does it work?

    As long as the Mac meets the system requirements you can use your Cloud software on it.  With a Cloud subscription you can have two machines with working installations and they can use either or both platforms.

  • Reports for DP and SNP and SCM?

    hi friends,
    what type of reports generally we will develop for APO(dp and snp) and SCM if the client is manufacturer, chemical and pharmaceutical?
    regards
    ssk

    Hi Suneel,
    I'm not sure if DP or SNP have standard reports. But you can create every kind of reports if you make an extraction structure from your planning area to APO-BW. When you have planning area data in an infocube, then you can use BEx to do some queries.
    I hope this can help you.
    Regards.

  • Addition of new field in VA02 and VA01 in additional data tab B

    Hi,
    I have added a new field called delivery date to additional data tab B in both tcodes va01 and va02. Now, while creating or changing a sales order, if the Sales group is I00 then this field should be filled up mandatorily. For va01 and va02 i have done all the required coding where all this is done on pressing the save button when we are in the additional data b tab.It would throw an error message if the date is wrong and a wrning if it is empty (provided sales group is I00). I did the coding in 4462 screen.
    My requirement now is that if somebody doesnt go to the 'additional data b' tab n try to save the Sales order then also it should throw a warning or error stating that delivery date field should be filled up. Where exactly should i place the coding now? if it is screen 4900 then can someone suggest me at what place should the coding be done.
    Regards,
    Puja

    Hi Puja,
    Seems you have added the fields at item level in sales order and for this you must have appended the additional fields
    in vbap table. So to validate these fields you can use USEREXIT_CHECK_VBAP available in MV45AFZB user exit include.
    The fields you appended will be available in vbap structure, add your validation here or even in USEREXIT_SAVE_DOCUMENT_PREPARE  available in MV45AFZZ which is called before saving the sales order.
    Regards,
    Pawan

  • Addition of New Column name "Qty" in user defined layout for CJR2

    Hi Friends,
    I am going thorugh variurs posts but could not a fetch correct answer. If that was available and missed, sorry about that.
    My requirement is, wanted to have new user defined layout which would be copied from 1-701 (CJR2). The layout should have new column which would be named as "Qty".
    Note that I tried to change name after pulling new fileds from left side to right hand side but these fields are grayed out in change layout.
    What is the work around solution to have new column and tthis wouold be named as "Qty". Let me ask one question is it possible to add new fields name to standard layout like 1-702 other than what it has been delivered by SAP????.
    Looking forward to hear from and thanks for your efforts.
    Regards,
    Sudhakar

    Have you tried MENU > Edit > Columns > Append additional fields?
    I think you can not choose any other characteristics other than SAP has provided which is mentioned in SAP Help.
    Regards,
    Mahendra

  • Addition of new column in Transaction VL10G

    Hello Experts.
    My requirement is that USER want to add new column in Transaction  VL10G
    There two plant in which Ware house management is activated. while creating delivery from Transaction VL10G from these two plants, Storage type column should be added in layout in delivery creation screen.
    Storage type column should be appear after executing VL10G for Ware house managed plant only.
    please help me in that ,is there any configuration or USER Exist which can fulfilled my requirement. ?
    waiting for reply.....its quite Urgent
    Regards
    Pash@SD

    Hi
    Go to report V50R_USEREXITS and see these includes
    * 1. Add field to list-display
    * Userexits for additional fields on list display
    * use append-structure in DDIC at structure SHP_VL10_ITEM
    * and ad field value in one of these routines
    *INCLUDE LV50R_VIEWG02.       "POS_ITEM_FILL_USER:       SD/MM-orders
    *INCLUDE LV50R_VIEWG03.       "POSTAB_VEPVG_FILL_USER    SD-Index
    *INCLUDE LV50R_VIEWG06.       "POSTAB_VETVG_FILL_USER    MM-Index
    *INCLUDE LV50R_VIEWG07.       "POSTAB_DELIVERY_FILL_USER Delivery item
    See also SAP Note 421791 - VL10: Including new fields in the shipping due date list
    Regards
    Eduardo

  • Addition of new column in standard ALV

    Hi,
    Can somebody help on
    How to add new col in the ALV and also addition of a custom button.

    Check this..
    for adding column
        data lo_cmp_usage type ref to if_wd_component_usage.
        lo_cmp_usage =   wd_this->wd_cpuse_alv1( ). " alv1 is my alv component name
        if lo_cmp_usage->has_active_component( ) is initial.
          lo_cmp_usage->create_component( ).
        endif.
        data lo_interfacecontroller type ref to iwci_salv_wd_table .
        lo_interfacecontroller =   wd_this->wd_cpifc_alv1( ).
        data lo_value type ref to cl_salv_wd_config_table.
        lo_value = lo_interfacecontroller->get_model(
        data: lo_column1 type ref to cl_salv_wd_column.
        lo_column1 = lo_value->if_salv_wd_column_settings~create_column( 'ATTRIBUTE NAME IN CAPITAL ).
    Regards
    Srinivas

  • Exchange Sync Not Working After Addition of New DC

    We have several Iphones in my business that all sync Mail/Contacts/Calanders over the air. Everything had been working fine, until I installed a new Domain Controller to the domain (details below). I am sure it is just a small issue that is being overlooked, but so far it eludes me.
    What we have (our environment)
    *Exchange 2003 SP2 on a Win 2k3 server - we use OWA and Activesync - all on one server, NO frontend/backend setup.
    *Original DC - Win 2k3 server with DNS and DHCP
    *New DC added - Win 2k8 r2 with DNS and DHCP
    The Domain Controllers Both replicate all information without errors and nothing has been changed on the exchange server prior to the addition of the new DC and the sync issues.
    I am hoping someone could help guide me in the right direction here and maybe help me find the missing piece of the puzzle.
    Thanks to all in advance!

    Problem Solved.
    After struggling with all the potential problems that a new AD/DNS/DHCP server could pose to my Iphone active sync, I then started checking my exchange server settings from top to bottom and found in the Virtual Directory I created for active sync, under the directory security tab and in the Auth and access control section that somehow the basic authentication check box was unchecked and the domain wasn't set.
    How and when or if these settings changed is unknown to me, but the problem did not present it self until after I added the second Domain Controller to the environment.
    Oh well, all is well now.

  • Addition of new fields and sub dields in ad hoc query

    hey all,
    hey friends i would like to know how to add additional fields and the sub fields in ad- hoc query.
    i had tried sq02 and went on creating new field but it is nt adng there and no options of sub fields are visible.
    note: i am entirely new to sap hr.. so plz try and help me out in a laymans language.

    At the Date Field, there is 1 node call the Additional fields.
    Then Right click the Additional field and choose create >> additional field.
    Then enter the field name, description, Data type and length.
    After that right click the newly created field name and choose code
    Then enter some simple code.
    E.g.
    For IT2006 the table does not provide the quota balance. If order to display the quota balance we can create an additional field call ZBalance. Then at code section enter the code ZBalance = p2006-anzhl - p2006-kverb.

  • Addition of New Authorization Objects in DMS

    Dear All,
    How to add new authorization objects in DMS?
    For ex: I have defined Projects in additional data through class/characterstics, now i want to bring that field in to authorization control and want control document creation with respect to characterstics values(Projects).
    Looking for documents or step by step procedures
    Kindly help me.
    Thanks in advance
    [email protected]

    Hi
    Im not so sure but you can create an Auth Key using BS52
    You can add it to Auth obj of Class/ characteristic
    You can get a list of auth obj in SUIM
    Niranjan
    Let me know if it helps...!!!

  • Add new keyfigure in SNP PB

    Hello,
    I need to add a new key figure in SNP PB to input values manually.
    I was trying to use a standard KF that is already in PA and that we are not using but when I try to change this KF in tcode /SAPAPO/SDP8B to set an input/output row, system gives me this message when saving:
    "Key figure <Aggregated distribution receipt (plnd)> must not be set to ready for input".
    I only have a few KF left to use and all gives me this error except 9AAFCST, but this one does not allow negative values (system set to 0) and the row I need is to input values than with a macro should change the Total Demand (to add or diminute).
    Anyone knows how can I do this?
    Thanks,
    Teresa

    Hi,
    what do you mean by a Z Time-series keyfigure, how can I do that?
    We can create a new keyfigure Z and add it to PA and PB? I just want a simple input keyfigure to use in a macro to sum to the real standard forecast that comes frm DP.
    Regards,
    Teresa

  • Firefox always opens with two tabs, one the tab I want, plus an additional tab NEW TAB which I don't want. How can I stop the additional NEW TAB?

    I open Firefox in new windows for sites I want to go to. I don't open in Tabs. Each time I open an new firefox window and when I restore the windows I had open, each site has an additional tab (2-tabs). The first tab is the site I want up the second tab is NEW TAB. I have to go through 10 to 14 Firefox windowe to close each 2nd and additional NEW TAB to individually close the NEW TABS. I had this before updating to the current Firefox and thought upgrading would solve this issue, but it didn't.

    I started in safe Mode. I have the default theme. Starting in safe mode still gave me the same problem. I went back to the normal Firefox and still had the same problem. Yesterday I restarted my computer for 11 Windows updates. I am not going to spend all day starting and restarting my computer and removing my History and whatever else. Firefox should have a direct contact to it's users, to assist them instead of having their users work for them as forum responders and trouble shooters. This has already taken up way too much of my time.
    I will say in normal Firefox the additional NEW TAB had no URL in it, but it did have the 12 icons on the page. In Safe Mode it had a URL that began with Chrome and it had a blank page, it didn't have the 12 icons as in normal mode. I don't have anything Chrome on my computer.

  • Addition of new TAB at Material Master screen

    Hi Experts,
    I want to add one new tab in between "Descriptions" and "Unit of Measure" tab (under "Additional Data" section in material master). That should hold few language dependent "Brand and Product" data. But, I have no idea is it possible or not. 
    Please let me know the process if it is possible.
    Thank You.

    Transaction Code - MM01                     Create Material &
    Exit Name           Description
    MGA00001            Material Master (Industry): Checks and Enhancements
    MGA00002            Material Master (Industry): Number Assignment
    MGA00003            Material Master (Industry and Retail): Number Display
    No of Exits:          3
    USER EXIT
    http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
    http://www.sapgenie.com/abap/code/abap26.htm
    http://www.sap-img.com/abap/what-is-user-exits.htm
    http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
    http://www.easymarketplace.de/userexit.php
    http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
    http://www.sappoint.com/abap/userexit.pdfUser-Exit
    http://www.sap-img.com/ab038.htm
    http://help.sap.com/saphelp_46c/helpdata/en/64/72369adc56d11195100060b03c6b76/frameset.htm
    USER EXIT
    http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
    http://www.sap-img.com/abap/what-is-user-exits.htm
    http://expertanswercenter.techtarget.com/eac/knowledgebaseAnswer/0,295199,sid63_gci982756,00.html
    Rewards if useful.........
    Minal

Maybe you are looking for