Addition of Two char type fields

Hi All
In a custom (ZSTRUCTURE) structure, we have defined a field called 'ZQUAN".
The field is associated with "ZZQUANT", which is Char 23 length.
There is another field called lv_qty like VBRP-FKIMG, defined in source code.
In source code, i need to add both of the above fields.
While adding thse, system is showing RunTime error.
What should be the logic to remove RunTime Error and make the addition successfull..??????
Regards
Pavan

Hi All..
Thanks for your reply.
I have tried with all the tips that you have specified in your messages.
All the attemptes lead to again Run Time error "Unable to interpret "10.000" as a number".
The value 10.000 is stored in the ZZSTRUCTURE-ZQUAN.
Help me out Friends......

Similar Messages

Data truncation when using resultset.getString() to a char type field

In my table ,there is a char type field,such as a char(4) field, for multilanguage use,I put two "double-byte" character in it,
when I using resultset.getString() to this char type field,I can't get the right result,one char was truncated, so I only get three char, for "double-byte" it 's error code
this only happen on IBM JVM on AIX 5 , when I use oracle jdbc on windows hotspot vm , it works fine (we use the same oracle on AIX)
is there any further setting for JDBC driver on AIX ? but it 's thin driver
and the varchar type works fine at any paltform
any help ?

Hi jul!!!
write like this:
DATA : wa_flight_data TYPE bapisfldat,
wa_add_info TYPE bapisfladd,
wa_availability TYPE bapisflava,
it_ret TYPE STANDARD TABLE OF bapiret2,
wa_ret TYPE bapiret2.
PARAMETERS : pa_carr TYPE sflight-carrid,
pa_conn TYPE sflight-connid,
pa_date TYPE sflight-fldate.
CALL FUNCTION 'BAPI_FLIGHT_GETDETAIL'
EXPORTING
airlineid = pa_carr
connectionid = pa_conn
flightdate = pa_date
IMPORTING
flight_data = wa_flight_data
additional_info = wa_add_info
availibility = wa_availability
TABLES
*EXTENSION_IN =
*EXTENSION_OUT =
return = it_ret.
write : / 'Flight Data: ',
wa_flight_data-AIRLINEID,
wa_flight_data-AIRLINE,
wa_flight_data-CONNECTID,
wa_flight_data-FLIGHTDATE,
wa_flight_data-AIRPORTFR,
wa_flight_data-CITYFROM,
wa_flight_data-AIRPORTTO,
wa_flight_data-CITYTO,
wa_flight_data-DEPTIME,
wa_flight_data-ARRTIME,
wa_flight_data-ARRDATE,
wa_flight_data-PRICE,
wa_flight_data-CURR,
wa_flight_data-CURR_ISO.
similaryly for wa_add_info and wa_availability.
becoz u r using work area directly in WRITE statement and
wa_flight_data TYPE bapisfldat,
wa_add_info TYPE bapisfladd,
wa_availability TYPE bapisflava,
contains both int and char data so u can print all of them together..They can be printed field by field.
if any doubts..let me knw.
hope it helps.
kindly rewrd.

Setting a default initial value to a CHAR type field in a custom table

Is it possible to set a default initial value to a field in a customer table(Ztable) that is not SPACE? SAP sets the initial value to " " space for datatype CHAR.
I am looking at creating a field in a table that would always default to 'X' on creation of a new row.
Your response is appreciated..

Hi,
I believe this cannot be done..
If you are inserting the row through a program then you can insert the field value to be 'X'.. If the value is not passed ..Then it will be blank..
If you are using table maintenance then in the PAI ..you can insert values..
Thanks,
Naren

HOW TO TRANSFER DATA FROM CHAR TYPE TO NON CHAR TYPE

HI EXPORTS,
THIS IS SASIDHAR, I HAD UPLOADED DATA FROM FLAT FILE INTO DYNAMICAL INTERNAL TABLE NAME <T_UPLOAD>. THIS INTERNAL TABLE FIELDS ARE CONVERTED INTO CHAR TYPE FIELDS. NOW I HAVE TO TRANSFER THIS DATA INTO ANOTHER INTERNAL TABLE <DYN_TABLE> WHICH CONTAINS BOTH CHARACTER AND NON CHARACTER FIELDS. PLEASE ANY ONE GUIDE ME REGARDING THIS ISSUE.
THANKS AND REGARDS
SASIDHAR.V

there is no specific CASTING operation in ABAP, so just do following:
non-char-field = char-field.
as long as it is possible ABAP does implicit casting and you dont have to care about anything.

Need to setup Premiere CS6 sequence for two file types with different field orders

I have a client who has shot video for me using two cameras, one camera was set to progressive, and the other to interlaced upper field first. I need to use both file types in the edit and have been struggling to set up the sequence to get the best look for the end product, a DVD. I have several videos to do for her that were all shot in the same way, so I need a solution!
I would appreciate help figuring out how to set up this work flow from beginning to end.
Should I convert one of the files from the beginning so they match field orders before going into a sequence? Or do I just need to do some adjusting of the files once they are in the sequence? Is it just as simple as changing the transcode settings to favor the upper field first? I'm definitely having issues once the video is transcoded in Encore and you can see a lot of jagged edges and lines especially during movement. My client isn't happy and I've tried several workarounds, but to no avail.
Here are the two file types I have:
File extension: .MOV
H.264, 1920x1080, Linear PCM, 16 bit little-endian signed integer, 48000 Hz, stereo
FPS 29.97
No Fields: Progressive Scan
File extension: .MTS (my Mac finder can't read these files, but they are read in Premiere)
Image Size: 1920 x 1080
Frame Rate: 29.97
Source Audio Format: 48000 Hz - compressed - 6 channels
Pixel Aspect Ratio: 1.0
Upper Field First
I am using Adobe Premiere CS 6.0.2
Encore 6.0.1
Media Encoder 6.0.2.81
I am running it on an iMac 27-inch, Mid 2011
with Mac OS X Lion 10.7.5
Processor 3.4 GHz Intel Core i7
Graphics AMD Radeon HD 6970M 1024 MB
I've just been setting the sequence to match the .MOV files since they look much better than the .MTS files. I've done the opposite as well, setting the sequence to match the .MTS files and it doesn't seem to help. I've also changed the field order of the files once they are in the sequence by changing the field options and have tried converting the .MTS files in the Media Encoder, but nothing I've done has worked.
Any help would be so appreciated! The client I have is a photographer, so she wasn't aware of this issue when she first shot these videos. So I have 10 videos with these issues I need to get back to her, hopefully issue free! I'm struggling as an editor because my last job I was using FCP and was working with videographers who knew what they were doing, so I've never faced such problems before. Plus I'm new to the Adobe software. Not a good combination. Please forgive me if I didn't give all the information you need. I will happily respond with whatever more information you may need to help me out!
~KTrouper

I wonder if you could do your edit ignoring any visual issues of the interlaced footage but keeping the different sources separate ( checkerboard edit Vid 1/ Vid 2 )
Lock it down then export the interlaced part of the edit as a Digital Intermediate.
Maybe Export the other source as well to the same codec. DI
Bring them back together in a New Sequence. You wold have to deal with the black spacing.

How can I use jbo:InputSelect for a char type filed?

How can I use <jbo:InputSelect for a char type filed?
I have two tables. One is room (primary key is room(type is char)), another table is responsibility (foreign ker is room(type is char)). Both tables have same length for room column.
There is a problem:
If I use (in the "DataEditComponent.jsp" file)
<jbo:InputSelect multiple="false" datasource="dsEdit" displaydatasource="roomData" displaydataitem="ROOM" displayvaluedataitem="ROOM" ></jbo:InputSelect>
to get the room input for responsibility from combobox(Datasource roomData is from room table). In the form the room field cannot bind the data in combobox, alway select the first item. And if I select one item and click the update button.There is an error message:
Error Message: JBO-27010: Attribute set with value H409 for Room in Responsibility has invalid precision/scale
I found If I changed the field type from char to varchar2 in database also change the entity objects, it works well. I wonder if there are any diffrence using <jbo:InputSelect tag in char and varchar2 type. How can I use <jbo:InputSelect for a char type filed as i don't want to change my datatype in database at this stage.
I try this in JDeveloper 9.03, 9.034, 9.04. The result is the same.

If I were in your shoes, here's how I would do it:
<%-- Assuming you have dsRoom and dsResponsibility --%>
<%-- Select is an HTML tag --%>
<select name="ROOM" size="1">
<% char roomID =""; // Init your character var
// Open a rowsetIterator to get the records and add them to the LOV
<jbo:RowsetIterate datasource="dsResponsibility" changecurrentrow="true" >
<% roomID = (char)dsResponsibility.getRowSet().getCurrentRow().getAttribute("ROOM"); // Grab the char value
// add the value to the LOV
%>
<option value="<%=roomID%>"><%=roomID%></option>
</jbo:RowsetIterate>
</select>
If you are using this as part of an edit page you may want to utilize the "selected" option of the <option> tag. In one instance I am doing this on an edit page because the use may open an existing record. If I don't account for it, then it will change the DB to contain the first value from the list! You can do a simple check like:
//Set the current record's char
char curRecord = (char)rowEdit.getAttribute("ROOM");
// inside the iterate:
if (curRecord == roomID) {
<option value="<%=roomID%>" selected><%=roomID%></option>
} else {
<option value="<%=roomID%>" ><%=roomID%></option>
Hope that helps!

Two Flow Types for Capital Increase

Hi Experts, I have the following situation: In the Fixed Term Deposit I created an additional flow type for Capital Increase since my client needs that a one single Investment should be created from two different house banks; therefore I created one additional Flow Type that increases capital but what happens now is that when entering the data for the Fixed Term Deposit my client has to select which flow type in the main Structure screen is there any way or configuration that can be donde so that the system suggest a Flow type and the other one will be just Other Changes in Capital Structure??
THANKS IN ADVANCE!!!!
Santiago

Hello, Santiago.
There is a proble of empy Flow type fields if you have 2 or more Flow types.
Use BADI FTR_TR_GENERIC, method EVT_APPLICATION_START
Sample code:
" Limit this code to specific product type where you have 2 flow types for
IF pi_proxy_transaction->a_transaction-sgsart = '51A'.
    " We use field-symbol to enter our screen field,
    " becuase we are not able to update field directly.
    FIELD-SYMBOLS: <fs_mseg> TYPE ANY.
    ASSIGN ('(SAPLTM00)VTMHPTBWG-SFHAZBA') TO <fs_mseg>.
    " Always check if field-symbol is assigned to our field
    IF sy-subrc = 0.
      " Assign Flow type to screen field
      <fs_mseg> = '1100'.
    ENDIF.
ENDIF.

Xfa.layout.relayout(); not working properly on two of four fields

I have a contract that can be signed by four different departments with multiple people able to sign. I have used a text field where the signer can enter their name and have that name appear under the signature line, with their title. I have used xfa.layout.relayout(); in the script, named the text field and it's appropriate output floating field the same, used global data binding and yet when I open the form in Acrobat, two of the fields work perfectly and the other two are giving me an error that they are expecting an integer and are showing a "1" in the text field and in the floating field below.
How can I fix this?

Hi,
I was thinking about your problem and I think there is a simpler way.
At the moment you have two objects to achieve the effect, and a small script. You can achieve a similar effect by specifying a null pattern for a single textfield. You can add to the display pattern to cover when the user types in some data. eg null{}|text{}.
The advantages include one field, user sees one place for action and is not trying to fill in the floating field, and no script.
Here is an example (WIP): http://assure.ly/pZ5sOz.
Good luck,
Niall

How do automate using two output types in an invoice based on plant

Hello,
Can you tell me how to configure automatically two output types for the same invoice.
My client has business in USA and Europe.We are using only one sales organization. But we need to print invoices in letter size and A4 size depending on whether the invoice is created in europe or in USA. So , I have created two output types, one for letter size and one for A4 size. How do I configure so that if it is based in a plant/shipping point in Europe it is printed using the A4 output type else in letter size. Please suggest.
SAPSDUSER

I do not think you can use plant/shipping point in your access sequence for invoice output on header level, unless you add these fields to header level kommunication structure and populate these fields in userexit.
You can either
1. define requirement routines for your 2 output types which are mutually exclusive (if plant = A routine 1 returns sy-subrc = 0, routine 2 returns sy-subrc <>0, if plant = B routine 1 returns sy-subrc <>0, routine 2 returns sy-subrc = 0). You can assign requirements to output type either in output determination procedure OR in the access sequence. I would do it in output determination procedure. Check transactions NACO or NACE.
OR
2. add your fields to komkbv3 communication structure, populate your fields in thsi structure in userexits which are called from the function module komkbv3_fill and then you can either use then in the access sequence for your output types or create routines as in case 1. but the logic will be a simple check statement since KOMKBV3 is available in these routines.
3. In fact you can use one output type and select your layout in the print program itself... which may be even easier for you. We use this approach to select proper layout for GEOs which may have several layouts depending on region for example... so the output type is defined per country, then layout is selected by print program. (tnapr-fonam = ..., nast-spras = proper language, set country '' to use proper decimal & date format...)
Message was edited by:
Siarhei Mahulenka

Unicode - "DMBTR" must be a character-type field (data type C,N,D or T)

Greetings Experts!
I am trying to convert legacy code to Unicode for a current ERP6.0 reinstallation and have encountered the syntax error "DMBTR" must be a character-type field (data type C,N,D or T)
The field is part of a structure and the fields attributes are as follows:
COMPONENT = DMBTR
COMPONENT TYPE = DMBTR
DATA TYPE = CURR
LENGTH = 13
DECIMALS = 2
DESCRIPTION = Amount in Local Currency
The code in question is as follows:-
macro Move_Zoned.
Converts a numeric variable to zoned format and moves it to a
target variable.
DEFINE move_zoned.
     &1 - source variable
     &2 - Number of Decimal Places
     &3 - 'To'
     &4 - Target Variable.
write &1 to w_zoned no-grouping decimals &2.
condense w_zoned.
     Remove the Decimal Points.
search w_zoned for '...'.
while sy-subrc = 0.
    move sy-fdpos to w_to_point.
    if w_to_point = 0.
      w_to_point = 1.
    endif.
    compute w_from_point = sy-fdpos + 1.
    concatenate w_zoned+0(w_to_point)
                w_zoned+w_from_point
           into w_zoned.
    search w_zoned for '...'.
endwhile.
shift w_zoned right deleting trailing space.
translate w_zoned using ' 0'.
call function 'Z_TRANSLATE_ZONED_DECIMALS'
    exporting
      i_input              = w_zoned
    importing
      i_output             = w_zoned
    exceptions
      x_invalid_zoned_char = c_invalid_zoned_char
      x_numeric_info_lost = c_numeric_info_lost
      others               = c_other_zoned_error.
     Get the length of the recipient field so we don't truncate the
     numbers....
describe field &4      length w_flength in character mode.
describe field &4      type   w_type.
describe field w_zoned length w_zoned_len in character mode.
if w_zoned_len <= w_flength.
    move w_zoned to &4.
    shift &4 right deleting trailing space.
    translate &4 using ' 0'.
else.
        Get the start position....
        If it's a packed field allow for values up to 6 figures
    compute w_zoned_len = w_zoned_len - w_flength.
    if w_type = 'P'.
      subtract 2 from w_zoned_len.
      clear w_type.
    endif.
    move w_zoned+w_zoned_len &3 &4.
endif.
END-OF-DEFINITION. "Move_zoned
LOOP AT t_single_kunnr.
    move_zoned t_single_kunnr-postamt 2
            to t_single_kunnr-dmbtr.
    DIVIDE t_single_kunnr-dmbtr BY 100.
    MODIFY t_single_kunnr.
ENDLOOP.
Is there a solution to get past this syntax error as I would rather not change the datatype of the field in the structure.
Much Obliged
Elphick.

Type X is not allowed in Unicode. When a field is declared as Type X with Value u201809u2019 or any other value, it can be resolved by using classes.
Before Unicode
                  CONSTANTS: c_hex TYPE x VALUE '09'.
Resolution:
Itu2019s work for any value of x.
First a temporary field of Type c should declare. Following class will convert Type x variable into type c.
Example:
CONSTANTS: c_hex TYPE x VALUE '09'.
DATA: LV_TEMP TYPE STRING.
DATA: LV_TMP TYPE C.
TRY.
CALL METHOD CL_ABAP_CONV_IN_CE=>UCCP
EXPORTING
UCCP   = c_hex
RECEIVING
CHAR   = LV_TMP   .
CATCH CX_SY_CONVERSION_CODEPAGE.
CATCH CX_PARAMETER_INVALID_TYPE.
CATCH CX_SY_CODEPAGE_CONVERTER_INIT.
ENDTRY.
CONCATENATE I_OUTPUT-BKTXT I_OUTPUT-BVORG
I_OUTPUT-BUDAT I_OUTPUT-MESSAGE INTO
SEPARATED BY LV_TMP.
I_BUFFER = LV_TEMP.
CLEAR LV_TEMP.
CLEAR LV_TMP.
OR
Note: It works only for type x value 09.
CLASS cl_abap_char_utilities DEFINITION LOAD.
CONSTANTS: c_hex TYPE c VALUE
                         abap_char_utilities=>HORIZONTAL_TAB.

How to Add Values in INVOICE SUB-TYPE field at the Invoice Header Forms

Hello,
Does any body knows how could I add/modify values in the INVOICE SUB-TYPE field at the Invoice Header Forms?. This values are related to the Globalization, in this case for the Chilean Localizations.
Thanks,
Alejandro R.

It gives any error or just does nothing?
Have you tried making another simple form with just one block and one or two items?
You can do this type of testing in these conditions.
Which version of forms are you using?

Select query based on Simple Type field in JDT

Hello Experts,
We have a JDT table consisting of a field "CONSUMPTION_ID" which refers to a Simpletype.So at oracle level the datatype of the field shows as CLOB instead of String. I am unable to use this simple type field in the WHERE clause in my bean .
Following are the queries i have tried and the errors i have got executing them :
Query1 - SELECT * FROM TEST_TABLE WHERE CONSUMPTION_ID <> 'RT'
Error - com.sap.sql.log.OpenSQLException: The SQL statement "SELECT * FROM "TEST_TABLE " WHERE "REF_MAT_DOC_NO" = ? AND "REF_MAT_DOC_YEAR" = ? AND "CONSUMPTION_ID" <> 'RT'" contains the semantics error[s]: - 1:84 - type check error: the expression >>"CONSUMPTION_ID"<< (CLOB) is not comparable and must not be used with "<>"
- 1:84 - type check error: the left hand side >>"CONSUMPTION_ID"<< (CLOB) and the right hand side >>'RT'<< (CHAR) of a comparison operator are not comparable
Query 2 - SELECT * FROM TEST_TABLE WHERE to_char(CONSUMPTION_ID) <> 'RT'
Error - com.sap.sql.log.OpenSQLException: The SQL statement "SELECT * FROM TEST_TABLE WHERE REF_MAT_DOC_NO = ? AND REF_MAT_DOC_YEAR = ? AND to_char(CONSUMPTION_ID) <> 'RT'" contains the syntax error[s]: - 1:91 - SQL syntax error: the token "(" was not expected here
Please let me know if any one has used WHERE clause on fields which refer to a simpletype in JDT, or any other solution to the above problem
Regards,
Virag

Hello Experts,
We have a JDT table consisting of a field "CONSUMPTION_ID" which refers to a Simpletype.So at oracle level the datatype of the field shows as CLOB instead of String. I am unable to use this simple type field in the WHERE clause in my bean .
Following are the queries i have tried and the errors i have got executing them :
Query1 - SELECT * FROM TEST_TABLE WHERE CONSUMPTION_ID <> 'RT'
Error - com.sap.sql.log.OpenSQLException: The SQL statement "SELECT * FROM "TEST_TABLE " WHERE "REF_MAT_DOC_NO" = ? AND "REF_MAT_DOC_YEAR" = ? AND "CONSUMPTION_ID" <> 'RT'" contains the semantics error[s]: - 1:84 - type check error: the expression >>"CONSUMPTION_ID"<< (CLOB) is not comparable and must not be used with "<>"
- 1:84 - type check error: the left hand side >>"CONSUMPTION_ID"<< (CLOB) and the right hand side >>'RT'<< (CHAR) of a comparison operator are not comparable
Query 2 - SELECT * FROM TEST_TABLE WHERE to_char(CONSUMPTION_ID) <> 'RT'
Error - com.sap.sql.log.OpenSQLException: The SQL statement "SELECT * FROM TEST_TABLE WHERE REF_MAT_DOC_NO = ? AND REF_MAT_DOC_YEAR = ? AND to_char(CONSUMPTION_ID) <> 'RT'" contains the syntax error[s]: - 1:91 - SQL syntax error: the token "(" was not expected here
Please let me know if any one has used WHERE clause on fields which refer to a simpletype in JDT, or any other solution to the above problem
Regards,
Virag

Database Type field in Data Services 3.0

Hi,
Now I'm using the IDSServer 4.5 JDBC-ODBC driver type 3 to connect BEA Acqualogic Data Services 3.0 to MS-Access 2003.
I configured the IDSWaldbottDS DataSource with those parameters:
Driver class name: ids.sql.IDSDriver
URL: jdbc:ids://psnb161:12/conn?dsn=WaldbottDS
I created the system DSN ODBC datasource called 'WaldbottDS' in Windows XP
Based on the AdminServer log file, I can demostrate that the BEA connect successfully with MS Access:
####<Mar 5, 2008 9:14:37 AM ACT> <Info> <JDBC> <psnb161> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1204726477248> <BEA-001516> <Connection Pool "IDSwaldbottDS" connected to Database: "ACCESS", Version: "04.00.0000".>
Now, In the project Explorer, I executed those commands:
New -> Physical Data Service.
Inside the Create Physical Data Service dialog box, the Relational database objects is set to Tables and views.
I select the Data Source Type as Relational. When I select IDSwaldbottDS as Data Source, nothing appears in "Database Type" field. If I press the next button, an error message appears:
"Cannot obtain connection: driverURL = jdbc:weblogic:pool:IDSwaldbottDS, props = {EmulateTwoPhaseCommit=false, connectionPoolID=IDSwaldbottDS, jdbcTxDataSource=true, LoggingLastResource=false, dataSourceName=IDSwaldbottDS}.
Nested Exception: java.lang.RuntimeException: Failed to Generate Wrapper Class
     at weblogic.utils.wrapper.WrapperFactory.createWrapper(WrapperFactory.java:213)
     at weblogic.jdbc.wrapper.JDBCWrapperFactory.getWrapper(JDBCWrapperFactory.java:173)
     at weblogic.jdbc.pool.Driver.allocateConnection(Driver.java:247)
     at weblogic.jdbc.pool.Driver.connect(Driver.java:164)
     at weblogic.jdbc.jts.Driver.getNonTxConnection(Driver.java:647)
     at weblogic.jdbc.jts.Driver.connect(Driver.java:137)
     at weblogic.jdbc.common.internal.RmiDataSource.getConnection(RmiDataSource.java:359)
     at weblogic.jdbc.common.internal.RmiDataSource_WLSkel.invoke(Unknown Source)
     at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:550)
     at weblogic.rmi.cluster.ClusterableServerRef.invoke(ClusterableServerRef.java:224)
     at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:440)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
     at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:436)
     at weblogic.rmi.internal.BasicServerRef.access$300(BasicServerRef.java:58)
     at weblogic.rmi.internal.BasicServerRef$BasicExecuteRequest.run(BasicServerRef.java:975)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
I recognize that the "Database Type" must be filled with the database version so I can continue configuring the physical Data Source for MS Access 2003.
How can I solve this problem?

[ There original post I made is incorrect. The classes/shared libraries need only to be available to the server - they do not need to be available to ALDSP Studio, since the database is access via the server. Double check that the required classes/shared libraries for your jdbc driver are available to your server ]
I searched our CR database for the stacktrace/error that you have and found serveral CR. Most of them indicate the problem was jar file(s) for the jdbc driver were not present in the client classpath. So - whatever you added to the server classpath (and PATH - if there were also shared object libraries) - we need to add those to the ALDSP Studio (eclipse) classpath (PATH).
you can put the jar(s) in
aldsp_3.0\eclipse-plugins\dsp\eclipse\plugins\com.bea.dsp.ide.external_3.0.0
and modifying
aldsp_3.0\eclipse-plugins\dsp\eclipse\plugins\com.bea.dsp.ide.external_3.0.0\META-INF/manifest.mf.
There are two places in manifest.mf you will need to add the jar file - once under Bundle-Classpath and once under Export-Package.
Edited by mreiche at 03/07/2008 10:48 AM

Problem with select range for a character type field. Kindly Help! Urgent!

Hi Experts,
    I have to write a report to pull data from a table BUT000 for a selected range of BPEXT field values in selection screen.
    In the table BUT000, the BPEXT field is type char. Now what is happening is that if the user gives a range in selection screen from 1000 to 1010 the query pulls all the records where teh forst character starts from 1.
For example if the table has
    BPEXT
    1
    10
    100
    101
    1000
    1001
    1002
    1005
    1010
    20
    200
    2000
Then my query pulls
   BPEXT
    101
    1000
    1001
    1002
    1005
    1010
   Instead it should pull only
   BPEXT
    1000
    1001
    1002
    1005
    1010
    My guess this is because the BPEXT field is of CHAR type instead of numeric.
    What shall i do to solve this problem? Kindly help please!
Thanks
Gopal
Message was edited by:
        gopalkrishna baliga

Hi Chakradhar,
    How to find the conversion exit for BPEXT field?
    How to use the conversion exit in a select query in my ABAP report? Any sample code will be really helpfull.
   Please help!
Thanks
Gopal

How to Change Date-Type to Char-Type with Format?, When it.....

I'd like to Change format Data from Date-Type Column to char-type
especially, as 'YYYYMMDD' Format, But There are some Error Message.
I already know, to_char(sysdate, 'yyyymmdd') from dual,
But When it Applied my Table (has Date Type Column )....
That SQL was Error...
Table Description
===================
GUBUN     NOT NULL     NUMBER(7)
POLCD     NOT NULL     NUMBER(7)
TITLE          VARCHAR2(200)
VALUE          NUMBER(7)
SIDATE          VARCHAR2(20)
SQL
================================
SELECT TO_CHAR(SIDATE,'YYYYMMDD') as V_SIDATE , -- <== Error
TO_CHAR(SYSDATE,'YYYYMMDD') as V_TODAY -- <== Ok
FROM T_POLL
Error Msg
================================
ORA-01722: invalid number
.....I don't know Why... plz. help me, it's Urgent...-_-;
ICQ : 40751557
MSN : [email protected]
Finally, sorry for my poor English...

The reason for the error is you are applying a TO_CHAR function to a character datatype. SIDATE is a character. That field should be a date field. If for some reason, you need it to stay as a character field then you will need to change it to a date then change it back to a character.
TO_CHAR(TO_DATE(SIDATE,'put format here'),'YYYYMMDD')

Addition of Two char type fields

Similar Messages

Maybe you are looking for