Additional field e.g  P.O Number field is to be included in AS03

Hi All,
In the Asset master under the tab origin data section, Additional field viz. P.O Number field is to be included, which can link data from MM Module  to Asset module for deriving the figures related to quantity, Amount and asset Name. such as the  following :
     PO No:- when any PO No is written in the given field it can link to MM
     Material No u2013 Material no from MM Module
     Quantity    - Unit/No of Asset from MM Module
     Name- Asset Name from MM Module
     Business Area u2013 BA from MM module
Is this purely the work of the ABAPer....Is there any other field where we can get those data related to MM module in this transaction code itself..
Regards,
Arvind

Hi Arvind,
There is no link between Asset and PO. The reason is that you can have more then 1 PO's for 1 asset!
When you use the transaction AW01N - Asset Explorer you can found the postings on the asset.
In the tab origin there are text fields you can use to put in manual the PO number.
Think about that asset is master data (like a G/L Account) and that the values are postings. (postings don't change the master data)
When you use investent manegement the asset/AUC will be updated in the tab Origin with the internal order/ wbs element number.
If you want to

Similar Messages

  • Data Modelling Problem with many additional Fields

    Dear All
    I am extracting transactional data from a CRM system where a number of  Customer Fields have been added.
    There are some 150 additional fields which are all included in a User Append structure and are all related to the transaction ( not master data),  in the CRM system only the required fields are displayed and this is dependant upon a category/sub category ( 300 combinations), which is also extracted in the transaction data. This is what I need to achieve on BW, to develop a query to only displaying the fields relevant to the current transaction and also allow the query to select on these fields, where there could be one additional field or over 10.
    The datatarget for this transactional data is an ODS object
    I am able to extract all the required fields but can't think of an easy way to achieve what I'm after.
    Any suggestions would be appreciated.
    Thanks
    Jenny

    Hi
    Currently in the ODS are two fields Category and Sub category. On the append structure applicable to the transaction data are some 150 additional fields which i have yet to determine how to handle. e.g.
    ZZ_LB_FACLT1     Liibraries - Facilities
    ZZ_LB_HIREQ1     Libraries - Hire Equipment
    ZZ_LB_LOCATN     Libraries - Location
    ZZ_LB_BOOKN1     Libraries - Name Of Book
    ZZ_LB_QUOTE1     Libraries - Room/Facilities Hire - Price Quoted
    ZZ_APPLNUM1     Planning Application No.
    ZZ_FLFLHIST1     Planning - Fulfilment - Property History
    ZZ_FLFL_LET1     Planning - Fulfilment - Objection Letters
    ZZ_FLFL_DSN1     Planning - Fulfilment - Decision Notice
    ZZ_WS_AC     Waste Management - Card Recycling - Action
    ZZ_WS_AL     Waste Management - Garden Waste & Card Scheme Action
    ZZ_WS_CWA     Waste Management - Clinical Waste - Action
    ZZ_WS_BIN     Waste Management - Replacement Bin
    ZZ_WS_BU     Waste Management - Replacment Bin - Burnt
    Not all fields will be filled for each record.
    For example for
    Category 100 Sub Category 1, I will need to display only the fields for Libraries.
    Category 200 Sub Category 2, I will need to display only the fields for Planning
    Category 300 Sub Category 3, I will need to display only the fields for Waste(ZZ_WS_AC, ZZWS_CWA, ZZWS_AL)
    Category 300 Sub Category 4, I will need to display only the fields for Waste (ZZ_WS_BIN, ZZWS_BU)
    Hope that helps.
    Thanks
    Jenny

  • E-Recruiting - additional fields in BSP vs. WDA

    Good morning!
    After searching high and low and not finding an answer, I would like to ask the experts this question.
    For the BSP candidate pages we were able to include additional fields via the customer include tables in selected HRPnnnn tables.
    The new fields were automatically added to the respective screen.
    Now that SAP is replacing the BSP with WDA, how are the additional field customer includes being used? Or is there a complete different way to add your own fields to the candidate profile screens?
    Thanks in advance and best regards,
    Mathias

    Hi,
    As of now, the custom fields automatically being displayed on screen is available only with BSP.
    The WDA screens are available for extrenal & internal candidates. You can craete your Z fields in cutomer include in the respective infotypes. The WDA developer will ahve to explicitly put the UI elements on the relevant screens & map them to these Z fields. We had a similar requirement & we have done this in this way.
    Regards,
    Sowmya

  • How To Add Additional Fields When Creating New Contact From w/in Mac Mail?

    Hi there. When in Mac Mail and clicking on contact information provided within an email, we are able to either (1) CREATE NEW CONTACT or (2) ADD TO EXISTING CONTACT (by clicking on the arrow next to a phone number, address, etc.). If I choose "Create New Contact," how can I add additional fields BEFORE clicking on "Add to Address Book" button in lower right corner? Let's say, for example, I know this new contacts URL or company. (Currently, I am creating the new contact from within Mac Mail and then going to Address Book and finding the contact, then editing, the adding the additional fields, then saving, and then going back to Mac Mail. This all takes time.)
    Note: When creating a new iCal event from within Mac Mail, we can click on Option/Alt key when selecting drop-down arrow...and this will allow us to add additional information. The same feature isn't available for address book???

    I have the exact same question and problem. If there was a way to automatically open the AB entry after "creating new contact" this would solve it.
    Thanks for any suggestion

  • Adding Additional field "Supplier name" & "Supplier No" in MB5B Report?

    Can i add the above stated two additional fields in the standard report of MB5b, is there any implicit enhancement in the standard report which can help achieve my objective?

    Hi,
    The possibility to include additional fields in the report MB5B is       
    limited to MSEG, just as you can see in the text of the                  
    report RM07MLBD_CUST_FIELDS itself:                                                                               
    This include contains the structure for additional fields for report 
    RM07MLBD ( transaction MB5B )                                                                               
    the following fields are not shown in the list of report             
    RM07MLBD                                                             
    If you want to insert some of these fields in the list of the        
    hidden fields delete the '*' in the type definition.                 
    >>* There are only fields from database table MSEG possible <<<<<<<<<<<  
    Please use only the following fields, because these fields           
    are considered during the creation of the field catalog;             
    plaese consider, that each active field will cost performance                                                                               
    If you need to add aditional information from other tables, like the     
    Reference Document Number you will need to  build your own query.    
    Regards,
    Mauro

  • SAP Query - Additional field that collects information from table RESB

    Hello gurus. I have a question.
    I want to create a SAP Query that shows me the stock level of a list of materials, and also show me the total quantity of order reservations in an additional field.
    I created an InfoSet with table MARD, which is the one that holds the Stock information in a plant. Then I created an additional field which would read information from table RESB, the table that holds order reservations per material.
    So I wrote this piece of code:
    SELECT * FROM RESB
    WHERE MATNR EQ MARD-MATNR and
           WERKS EQ MARD-WERKS.
    ENDSELECT.
    if ( sy-dbcnt NE '0').
          MOVE RESB-BDMNG to ZQTY.
    ELSE.
          MOVE '' to ZQTY.
    ENDIF.
    This works fine. However, this is currently just catching the first record in table RESB that matches my condition.
    What I would like is to collect every instance of RESB-BDMNG and add them to field "ZQTY", have it loop in RESB until it finishes finding every record that match the MATNR and WERKS. With this I could get the total number of order reservations that this material has in that table.
    Could someone share some coding that would help me achieve this?

    Yes! That did it. That's what I needed to do. Thank you so much.
    While I'm at it, let me ask you a related question.
    When I execute the query, in the first records of the query where there's no value from RESB to transfer, the value of field ZQTY appears empty. Once it finds the first record in RESB and it populates ZQTY with a value, then the rest of the records with no hit get the proper value of 0.
    Do you know why the first records in the query appear empty and not with a 0? Is there anything I should add to the coding to fix this?

  • Adhoc query Issue in IT0001- Additional fields.

    Hi Everyone,
            Im facing issue in adhoc query, In IT0001- Additional field .The supervisor name is not getting displayed in the output  even though personnel number is getting fetched.Output value attributes is  chosen  as 'value and text'.
    Details of the field:
    Name of the field: Personnel number of superior (Org. Manag
    Technical name :SYHR_A_P0001_AF_OMNGR_NR (Additional field)
    This is happening after the implementation of A3 to A9 notes.
    Thanks in Advance.
    Regards,
    S P Joshi.

    Did you try Ted's solution of identifying the "addtional field 'SYHR_A_P0001_AF_OMNGR_NA' "as a displayed field ?
    Note that if that field is not already in your Info-Set, you will have to add it (using t-code sq02).

  • Additional field in infotype 0009 issue ( PBO and PAI )

    Hi Guru,
    I need your help please.
    I have a additional field in IT0009 and when I want created a new infotype 0009, I fill all field but after ENTER or SAVE all field are save in the layout but not the additional field.
    To save the additional field in the layout, I must fill it again and after the ENTER or SAVE the field is save in the layout.
    I have checked in the debbugger, when I create a new infotype 0009 it goes to the PBO but after ENTER or SAVE it doesn't go to the PAI so I must do it again ( fill the additional field and ENTER or SAVE ) and then it goes to the PAI.
    Thus I would like to know how I can make so that after the ENTER or SAVE the screen goes in PAI before the PBO and at the first time.
    Thanks very much in advance.
    Regards.

    Hi Srini Vas, hi Pedro Guarita and thanks for your reply,
    After more investigation, the probleme come from a check over country bank.
    In fact, the screen of the infotype 0009 must be adpated following the country bank but to do this, the standard module pool (mp000900) check if the country bank have changed.
    call method cl_hrpad00_iban=>process_iban_pai
          changing
            cs_bankdata = ls_bank_data_current
          exceptions
            error_iban  = 1
            others      = 2.
        if sy-subrc <> 0.
          message id sy-msgid type sy-msgty number sy-msgno
                     with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
        endif.
        call method cl_hrpad00_iban=>get_bank_data_old
          importing
            bank_data_old = ls_bank_data_old.
        if ls_bank_data_current-banks <> ls_bank_data_old-banks. "MELN1357200
    bank country changed -> leave screen needs to be done
          leave_screen = 'X'.
        endif.
    But when you create a new infotype 0009, the ls_bank_data_old-banks is always initial. So when module pool compared the ls_bank_data_old-banks with the ls_bank_data_current-banks, those are always different.
    In conclusion, when you create a new infotype 0009 it is always mandatory to push ENTER before to fill any additional field because at each first time that the standard module pool go in the PAI, it make a leave screen.
    Thanks in advance for all yours reply.

  • Populating Additional Field in InfoSet Query

    Hello,
    My team and I are working on generating a relatively simple report from the VBAK (Sales Header), VBAP (Sales Items) and VEDA (Date data) tables.  We would prefer to be able to build an InfoSet (SQ02) and Query (SQ01) instead of writing a custom report.
    The problem is the VEDA table contains data that may link to the VBAK and sometimes the VBAP table.  The usage is that the header has begin and end dates for a contract, which is denoted by a blank value in POSNR field in the VEDA table.  If a particular line on a contract has different dates than the header, there will be an additional record in the VEDA table where the POSNR value matches the POSNR value from the VBAP (Item) record.
    The link to the VBAP table is straight forward being keyed off of the VBELN (doc number) and the POSNR (item number) fields in both tables.  However, there's isn't a POSNR field in the VBAK (header) table and the VEDA table shows this as a blank value in the POSNR field.
    The simplest thing I can think of doing is link the VEDA table to the VBAP and let it retrieve all the exact matches on Sales Doc & Item Number but add two "Additional Fields" to the Query that would represent the Sales Header begin and end dates.
    I know how to add an additional field but how would you "re-query" the VEDA table and under which option under the Code tab.
    Thanks

    Hi Alex
    Please see if below example helps you to understand:
    Supposing, we are displaying material description within our query.
    1. So we define the join with MARA & MAKT while creating infoset in transaction SQ02.
    2. We create feild groups to identify the fiels we use for selection and display.
    3. Here after selecting language key from MAKT, by default this will take SY-LANGU always for the case.
    4. To make it applicable for different languages we can code in INITIALIZATION Event.
    5. To do so we can do it by two options: Use menupath: Goto->Code->Initialization
    i) First option using variable: <b>MAKT-SPRAS = SY-LANGU.</b>.
    ii) Second option using Parameter-Id: <b>SET PARAMETER ID 'SPR' FIELD SY-LANGU</b>.
    6. Save & Generate.
    Now when we execute the query, we are defaulting the language as System Language.
    Hope the above info helps you for better understanding.
    Kind Regards
    Eswar

  • Multiple Value in additional fields using SAP Query

    HI All,
    I have a question related additional field in SAP Query. I tried to create report about PR and PO using SAP Query. Since one PR can be converted to multiple PO, I decided to create additional field
    po_1
    to display the value of PO that related to the PR. But I meet problem when I want to show several PO number in additional field
    po_1
    , I couldn't look the way to solve this problem. Can anybody help me? Just for info, I assign value to additional field
    po_1
    in record processing part.
    Thanks....

    HI,
    IN SQ02, IF table is already in JOIN, just click on the PLUS sign to expand the strcture.
    All the field showing Plus sign in the strcture are selected in your query and with MINUS sing are no selected.
    So you have to just click on the MINUS sign for the field you want to use through table field.
    Generate the query and execute thriugh SQ01.
    If you want to add some other field which is not a part of JOIN,
    then click on EXTRAS Button shown in the MENU option.
    Click on Create button and system will ask abt the additional field.
    Regds,
    Anil

  • Additional fields for line item display for Vendor Accounts

    Hi,
    The additional fields for line item display have been defined for the vendor accounts. I am able to see the additional fields in SAP 4.7 system but not in ECC 6.0.
    Could you help me to know how the same will be displayed in ECC 6.0 system.
    Thanks

    In SPRO, Vendor Accounts -> Line Items -> Display Line Items -> Define Additional fields for Line item display, the fields for Check number from (PAYR-CHECF) and Tax Jurisdiction (BSEG-TXJCD) have been defined.
    When I am executing Vendor Line Item display (FBL1N), I am not able to select these fields for defining a layout. Could you please let me know, how I will get these fields in FBL1N.
    Thanks

  • Additional field required in CIN  master data

    Dear All,
    In Vendor Master CIN details - Service Tax Registration Number field exist. we require one additional field for catogary of
    service of vendor for capturing thro' category.Please let us know how to provide one additional field to capture vendor Service Tax catagory.
    The requirement has come up to capture the nature of Services rendered by the Vendor as per Service Tax law for providing details to Govt.
    Presently, in J1ID we are capturing the CIN details of Service Tax Registration Number. If it is not possible to capture in CIN details do we have any blank field which we can utilise for this purpose in the Vendor Master. Please suggest
    Do revert
    Regards

    Hi
    hope you are maintaining the CIN data in J1ID transaction and same tab is available in vendor master record.  if you are maintaining this or not.
    if you not displaying this data in vendor master.  then maintain user id in transaction "OMT3E"  in user screen reference.
    then check your CIN details button in vendor master record. 
    please let me know if any information you want recording this.
    Regards
    Ram

  • Additional field required in QA32 -to assign the inspection lot - Inspector

    Hi.
    need an additional field in QA32 to allot the Inspection lot generated to the Inspector for the purpose of rating the inspectors by running a report.
    Also needs to appear  a drawing document number against the respective inspection lot which should also appear in the reports run at the QA32 screen.
    kindly pour in your suggestions.

    hiii,
    go as per Mr. Surjit
    Regards

  • Sap Query Additional Fields using  Abap Code

    Hi Experts,
    I am relatively new to the world of SAP query (Log Database PNPCE), I have written a number of additional fields to retrieve previous info-type data using the select statement E.G
    prev_endda = p0008-begda - 1.
    SELECT  single bsgrd
          INTO FTE1
          FROM
            pa0008
          WHERE pernr EQ  P0008-pernr
          AND   endda EQ prev_endda
    Although I can retrieve the previous info-type data , I was wondering if there was a easy way where I could take this a step further and show the Previous , Previous record. I.E
    Pernr     FTE Current    FTE1      FTE2
    101              60%          30%       75%
    I guess what I am asking is , is there a way to loop through the HR info-type records, does anybody know if there is a standard function or macro I can use to achieve this.
    Your help is much appreciated.

    Hi ,
    Thanks for our reply.
    I have pasted some example code into my additional field which I have created in SAP Query But im not sure how the loop bit works and how I can populate the additional fields that I have created , could you please explain this
    CALL FUNCTION 'HR_READ_INFOTYPE'
      EXPORTING
        pernr                 = '000000019'
        infty                 = '01'
        BEGDA                 = '18000101'
        ENDDA                 = '99991231'
      tables
        infty_tab             = p0008
      EXCEPTIONS
        INFTY_NOT_FOUND       = 1
        OTHERS                = 2
        LOOP AT p0008.
    NOT SURE WHAT TO PUT IN THIS SECTION *****
      ENDLOOP.
    I have created 3 additional Fields in the infoset Current FTE ,FTE1 FTE2 , and I want to loop through the records and populate the relevant Additional field with the employees FTE  (I only want to populate  where there is a change)
    Sample Data
    Begda              Endda             FTE        Salary
    1/1/2010         31/12/999       60%         19K          (Current  FTE)
    01/08/2009     31/12/2009     100%       27k           (FTE1)
    01/07/2008     31/7/2009         50%       17K          (FTE2)
    Thanks in anticipation
    DM

  • Additional fields in MIGO transaction

    Hi Everybody,
      We have a requirement where we need to have additional fields in MIGO transaction when the user chooses 'distribute qty' option to split the quantity, the normal screen shows the following fields,
    1. Qty in UnE
    2. Stock type
    3. Movement type
    4.Stor location, we need Serial number, Drum number in Screen number 1000 of SAPLMIGO program,  Can any one tell me how do I achieve this functionality,
    Rgds,

    The only option I see is design your own custom screen with the required fields and call it as popup ( Modal Dialog Box ) from user exit ZXMBCU02 .
    This user exit will be triggered when you click on "CHECK" or "SAVE" button.
    There is no way to modify MIGO screen itself , so maybe you will have to pass the item number etc from MIGO and have a table control on your custom screen for data entry.
    For saving data into database donot use this exit as a user may just check and go out and you will unnecssarily push the data into z table . In this exit do an export to memory for your custom fields.
    In another exit ZXMBCU01 , do an import from memory and update the required Z table . This exit is called while updating material document in update task.
    However to goto popup screen for displaying chnaging custom fields you will have to press "CHECK" button , maybe a user training issue.
    Cheers

Maybe you are looking for