Additional info printing on the preprinted stationary on One printer & Not
Hi,
I am using smartform to print info on the preprinted stationary.
The info to be printed is coming fine, But it is printing additional info like Job Name and User name (Login name) on the top left hand side of the pre-printed stationary when we use "HP Jetdirect print server".
The same does not happen when i choose Epson printer as the Front end printer.
To check if this has got some thing to do with the printer settings, When i print a Word Document to the same printer "HP Jetdirect print server". It does not print the additional info ( job name , user name ).
So please let me know what could be the reason for this additional info printing on the preprinted stationary on One printer & Not on other printer.
Regards,
Siva
Hi Siva,
Check if there is any sap note regarding this issue in service.sap.com
Regards,
Ravi
Similar Messages
-
This additional info printing on the preprinted stationary on One printer &
Hi,
I am using smartform to print info on the preprinted stationary.
The info to be printed is coming fine, But it is printing additional info like Job Name and User name (Login name) on the top left hand side of the pre-printed stationary when we use "HP Jetdirect print server".
The same does not happen when i choose Epson printer as the Front end printer.
To check if this has got some thing to do with the printer settings, When i print a Word Document to the same printer "HP Jetdirect print server". It does not print the additional info ( job name , user name ).
So please let me know what could be the reason for this additional info printing on the preprinted stationary on One printer & Not on other printer.
Regards,
SivaHave your Basis look into the Printer initialization code in the transaction SPAD. This code is linked to the output device and paper format type, so it is possible that the same printer works differently with different paper media.
Also have them check if there is a cover page. Although it would print as a separate page, I believe...
If you don't want to wait for Basis guys, see here how to get to the printer initialization code (you'll need access to SPAD though):
http://friendlyabaper.blogspot.com/2007/01/there-is-something-about-printer.html -
When I replaced my PC desktop with a Mac Mini and hooked up my HP printer to it, I discovered that my other computers on the Wi-Fi network could no longer access the printer. The manual says Maverick OS will not allow PC's to share the printer. Does anyone else have this problem? My printer does not have on-board Wi-Fi but, otherwise, works fine. I shouldn't have to buy a new one. Is there a OS patch out there that would open the printer port for my PC computers?
I'm assuming that on the Mac, the System Preferences -> Sharing -> Printer Sharing -> [X] HP printer -> Everyone can print is selected? That is to say, the Mac will allow anyone to print using the printer, and that you did not try to restrict who can print.
How is your network configured? Bonjour as a protocol will NOT cross a router boundary. If you have 2 or more subnets active with the PCs on one subnet and the Mac on another, that would block the PCs from seeing the Mac.
You could have multiple subnets if you have more than one router, such as an ISP provided broadband modem/router and another WiFi Router. If the PCs are talking to one router and the Mac is talking to another, that could be a 2 subnet situation. The additional routers must be put into bridge mode, which is done differently depending on the router. But the basics are to diable DHCP and NAT services on the secondary router(s) having just one active router on the network.
Also, using Bonjour Browser on my Mac, it is showing me that the printer is being advertised as using Internet Printing Protocol, so if that is something selectable on Windows, maybe you can bypass Bonjour on Windows. -
need to re-install the software for the c6280 all in one printer. downloaded the latest install package from the HP web site. During the install process, I get an error message .. can't find user/appdata/local/temp/7z256315/setup/.....setup/blocksysuser........
the folder 7z256315 does not exist on the HD.
I also get a message that it can't find PS_A10_02_software.msi.
Windows 7 , C6280 all in one printer. Printer is connected to the router. The desktop computer is connected via an ethernet cable, the laptop/ipad/iphone/internet radio are connected via wireless to the router.
hope you can help
thanks
charlie
This question was solved.
View Solution.Hi cberistain,
Follow the steps below, and let me know what happens?
Step one: Clear temp directory
Type %temp% in the run or search for programs and files field
Highlight all the files in this folder, and then press the delete key to delete. If you get a message that the file is in use you will need to skip this file(s).
Continue with Step 2 below
Step two: Downloaded and extracted to your system:
1. Download the full feature software and drivers
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-77039-1&cc=us&dlc=en&lc=en&...=
2. Once the download is finished double click on the file to extract the software.
3. When the installation window opens press the cancel button to stop the installation
4. Type %temp% in the run or search for programs and files field
5. Look for, and open the folder starting with 7z (Example: 7zS2356)
6. Right click on the folder, and select Copy
7. Close that window, and all your open windows, and then in the middle of the desktop right click your mouse, and select Paste. This will move the 7z folder to your desktop.
8. Open the 7z folder you just copied to your desktop
9. Open folder Util
10. Open folder CCC
11. Run the uninstall_L4
12. When the uninstall has completed restart the computer
13. Run Disk cleanup from Accessories\ System Tools folder under all programs
14. Download and install the latest version of Adobe flash player
http://www.adobe.com/support/flashplayer/downloads.html
15. Open the 7z folder, and then double click on the Setup.exe file which will be toward the bottom of the open window. Follow the on screen instructions to reinstall your printer.
Let me know if you are able to successfully install the software and driver, and are able to print & scan?
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution" -
HP Photoprinter C7280 printer. The wireless radio is on but not functioning - so am unable to gain wifi connection and print! - Why? How do I fix, Thanks
I would guess that the printer's wireless radio has died. Have you tried plugging the printer into your wireless router with an Ethernet cable? It should work and give you the same functions as wireless. Your computer or router will not care how the printer is connected.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP -
Ink Cartridge problem with the 7525 all in one printer
I put all new cartridges in the 7525 all in one printer and it keeps telling me that the cyan cartridge is damaged. also the ink levels on the new cartridges are not appearing full. they are all new HP cartridges.
The troubleshooting steps in the document here may help resolve the issue with your cyan cartridge on your Photosmart 7525 printer.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V -
I have been unable to print from FF to Brother HL-1440. print generate pages w/odd bits of text from the page, and sometimes one image. If I want to print off the web, I have to print PDF. Older versions of FF print fine.
I downloaded OpenOffice and am able to print documents (in particular, the same document I created in MS Word). I guess MS Word is to blame. I believe the issue is concluded, but I'd welcome any comments about the Active Directory, as I might have a problem
with OpenOffice in the future regarding that. -
Is the 2710 all-in-one printer supported/compatible to Windows 7? It was on a XP, however hard drive is crashing and need to see if I may need to buy another all in one printer or able to keep my 2710.
HP recommends that you use genuine HP cartridges. HP cannot guarantee the quality or reliability of non-HP cartridges, or refilled HP cartridges.
Well that being said about the cartridge, I would try a power reset like this:
With the power on, open the ink access door. Remove the power from the printer. Remove the ink cartridge and close the cover. Wait at least 30 seconds then reconnect the power cord to the printer. Turn the printer on. Open the access door and insert the cartridge. That may clear up the issue, if not well.......
007OHMSS
I was a support engineer for HP.
If the advice resolved the situation, please mark it as a solution. Thank you. -
I have the f4500 all in one printer need to know how to mirror my image
i have the f4500 all in one printer need to know how to mirror the image in easy terms
Hi bbfoot,
If you are having issues setting up your HP printer on your Mavericks machine, you may find the following article helpful:
OS X Mavericks: Solve printing problems
http://support.apple.com/kb/PH14142
Regards,
- Brenden -
What is the best all in one printer that works with the iPad
The best all-in-one-printer to use with the ipad mini
Any that advertise Airprint compability will work for printing. Note that you can't use the scanning or faxing features of an all-in-one with an iPad.
See the Airprint printers on the Apple store site:
http://store.apple.com/us/ipad/ipad-accessories/printers#!
Matt -
My sister has given me an old iPod touch 2 I think it is and after resetting the account info to mine the content was wiped and can not load any games now as it runs 3.1.3 and there all saying they need iOS 5 how can I update it to this
I suspect you have the original, 1G iPod touch. Those can only go as high as iOS 3.1.3,
If y ohave a 2G those can go as high as 4.2.1
Identifying iPod models
To update
The Settings>General>Software Update comes with iOS 5 and later.
Connect the iPod to your computer and update via iTunes as far as your iPod model allows
iOS: How to update your iPhone, iPad, or iPod touch
A 2G to 4.2.1. Requires iTunes version 10.X. If a Mac it requires OSX 10.5.8 or later.
To more easily find compatible apps:
iOSSearch - search the iTunes store for compatible apps.
Vintapps 3.1.3 - paid app.
Apple Club - filter apps by iOS version. -
I purchased Adobe XI for a year. I am charged monthly on my credit card. The software only allows one print file to pdf after that it has a pop up marketing screen asking me to purchase it again. If I reboot I can get another print out of it. After an hour of trying to reach somone on tech support I ran across this forum. Any help out there?
In the pop-up screen, have you tried licensing it and signing in? Signing in is crucial, so it knows what you paid for.
-
How to print multiple ALV Grids with only one print dialog?
Hi,
I have a report that has multiple ALV grids in splitter containers. The users want to be able to print those ALVs by pushing only one print button. I got it to work (parameter IS_PRINT and method SET_FRONTEND_PRINT before calling SET_TABLE_FOR_FIRST_DISPLAY) but I can't find a way to avoid that the printer dialog pops up for every grid I print.
I tried to use the function module approach with REUSE_ALV_LIST_DISPLAY but have the same issue. Any thoughts?
Thanks,
GuentherHi Peluka,
Well, that's exactly what I am doing. Putting one central button in the app is not the problem; the issue is that the print dialog (to select the printer) pops up for every individual ALV grid. E.g. if I place 4 ALV grids on my screen and trigger their print from a central button, I am getting 4 print dialogs.
Cheers,
Guenther -
Printing from the main window -- song order is not the same as playlist ??
iTunes 10.0.1 (22)
OS 10.6.4
Let's say you have a album with 18 songs. The songs are in the exact order of the album, from 1 of 18 all the way to 18 of 18. (track numbers are also correct, in order). You view by album (constrain the results window by searching for album title)
Now, print. Select any option, (I tried both cd jewel as well as song listing -- doesn't matter which you select).
The ORDER of the printed song list (or jewel case insert) DOES NOT MATCH the order of the songs in the album.
What good is that?
I can recreate this with various albums.
This NEVER happened before version 10.
Anyone have any info on this?
PS -- if you create a PLAYLIST and then copy the album into the playlist, it prints just fine. The issue is printing from the main window when in album view mode.
Thanks,
J
Message was edited by: Jeremy RobertsTry changing X postion to not equal to zero something else for example.
/: POSITION WINDOW
/: POSITION XORIGIN '-0.1' CH YORIGIN '+0.4' LN
/: SIZE WIDTH +0.7 CH HEIGHT +5.0 LN
/: BOX FRAME 7 TW
/: BOX HEIGHT '1.1' LN INTENSITY 15
Nabheet -
Is there a way disable the stand-by or hibernation feature on the 3050 all in one printer
When the Deskjet 3050 all in one goes into stand by/hibernation mode it really makes the wireless feature useless. I have to either get it to recognize the router again or power the printer down and back up again to be able to print wirelessly . I might as well stay connected via USB but that defeats the point of buying a wireless printer in the first place. There has to be a better way and I can't seem to find any info on this. Please help.
PC Windows XP (32), Netgear N399 Wireless Router, Deskjet 3050 J610aHard Reset – While printer is powered ON, pull
the power cord from the printer then from the
wall. After 30 seconds reconnect power to
wall and printer. This will trigger a ‘dirty power
up’ and restore the printer to a known good
condition (if it is possible). No user settings
are lost with a ‘hard reset’.
This ‘Hard Reset’ is one of the most powerful
tools to use when the printer hardware is not
functioning properly!
if not resolved, uninstall hp software &
reinstall using latest hp software from hp
website.
see link for duplex info:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01909142&cc=au&dlc=en&lc=en&product=3737195&tmp...
Although I am working on behalf of HP, I am speaking for myself and not for HP.
Love Kudos! If you feel my post has helped you please click the White Kudos! Star just below my name : )
If you feel my answer has fixed your problem please click 'Mark As Solution' and make it easier for others to find help quickly : )
Happy Troubleshooting : )
Maybe you are looking for
-
Dear friends, I have following confusinon in BPM. When i design for eg in BPM like the following: async RECIEVE----->SEND I like to understand the flow here.My Undersanding is- When message comes from source (file) flow is ( Source-->File adapter
-
New-need help separating layers in psd files
Good evening all, Could someone please direct me as to how to separate layers in a psd file? I am trying to remove the (layered) text from the background, and have never done this before. Thank you in advance, GB
-
This cloud thing is quite new to me. I currently have a single product subscription which is CS6 for which I have received updates. Should I be on Photoshop CC or is there a difference?
-
Hello Nokia. My L720 can't get amber update, I worry my phone can't get 8.1. My country is Cambodia. I need help...
-
I am having trouble opening Adobe Reader after I install it in my Safari.
I am having trouble opening Adobe Reader after I install it in my Safari. I have installed reader about 10 times now and it says I can use it now, but when I try to open a file it tells me I need to launch Reader and Agree to terms. I really need to