ADF Edit Screen from Search Screen

Hi All,
I have developed a search screen based on ADF tutorial which is linked to edit screen. When I select the radio button and click edit button I see the edit screen but it always shows the first record in the search screen even if I am not selecting it. Is there some kind of tweaking I got to do for this?. Please help.
Thanks

You need to use the same VO for both the list of records and the edit form.
Or you can use two separate VO's but then you need to synch the record that will be shown in the second view.
The second approached is shown in this tutorial:
http://www.oracle.com/technology/obe/ADFBC_tutorial_1013/10131/index.htm
(note the use of the setActionListener to pass the param to the other page).

Similar Messages

The whatspp massenger icon has disappeard from my screen i can only open the whatspp from search or find,How can i fix it?.

the whatspp massenger icon has disappeard from my screen i can only open the whatspp from search or find,How can i fix it?.

The app is not gone, it is impossible to remove it from the device.
Check all home screens and folders.
If you are unable to find it, Settings > General > Reset > Reset Home Screen Layout.
As a last resort, restore from backup.

Issue with Add/Edit screen list values

Hi,
I have a requirement in ADF application to list down one table as initial screen. From that screen I can go to add screen or edit screen.
Currently in adding screen, I am collecting all the data to a backing bean and finally when save is clicked i am transferring value to View programmatically.
In my add screen i have some fields in list. Some of them are master details list also. They are independent LOV bindings.
Currently while saving I can access all the values from backing bean, But for list fields I am getting index values only. Due to that I have mapped corresponding attributeValues to get its primary key to save.
But when i go to edit screen, how to i get and map this index value back to list so that it will show proper value selected, exactly like how it was showing on add screen?
Regards,
Santhosh

You may consider the below suggestion which needs no manual coding for creating new record as opposed to your current way of collecting data into bean and transferring value to view and then saving it.
a. In add screen page, drop the view object from the data control as ADF Form without navigation buttons
b. As you want the creation form when the page is loaded, add createInsert method binding to the pagedef and then add invokeAction executable binding to createInsert with refresh mode as renderModel(you can specify refreshCondition too if you want to provide any)
c. Add Commit as button
Sireesha

Elements 10, windows 8, 64 bit, epson artisan 835 printer: prints are really dark even after using enhancements like adjusting lighting. Prints are darker than photoshop edit screen. Prints are acceptable using paint, windows photo viewer, or gallery.

Elements 10, Windows 8, 64 bit, Epson Artisan 835 printer: Prints are really dark even after applying enhancements, like adjusting lighting. Prints are darker than Photoshop Edit Screen. Prints are acceptable using Paint, Windows Photoviewer, or Photo Gallery.

In general theory, one now has the Edit button for their posts, until someone/anyone Replies to it. I've had Edit available for weeks, as opposed to the old forum's ~ 30 mins.
That, however, is in theory. I've posted, and immediately seen something that needed editing, only to find NO Replies, yet the Edit button is no longer available, only seconds later. Still, in that same thread, I'd have the Edit button from older posts, to which there had also been no Replies even after several days/weeks. Found one that had to be over a month old, and Edit was still there.
Do not know the why/how of this behavior. At first, I thought that maybe there WAS a Reply, that "ate" my Edit button, but had not Refreshed on my screen. Refresh still showed no Replies, just no Edit either. In those cases, I just Reply and mention the [Edit].
Also, it seems that the buttons get very scrambled at times, and Refresh does not always clear that up. I end up clicking where I "think" the right button should be and hope for the best. Seems that when the buttons do bunch up they can appear at random around the page, often three atop one another, and maybe one way the heck out in left-field.
While I'm on a role, it would be nice to be able to switch between Flattened and Threaded Views on the fly. Each has a use, and having to go to Options and then come back down to the thread is a very slow process. Jive is probably incapable of this, but I can dream.
Hunt

My nokia N-70 Music Edition Screen displayed blank...

Hi
nokia N-70 Music Edition Screen displayed blank after few hours.After Removing battery,put again & start it becomes ok for few hours.I have already updated the Software Nokia N-70 but no advantage.
Wht should i do?

strange enough some of the pre-installed apps on the N70 are on the memory card and not the phone memory. which means formatting the memory card will remove everything. it's difficult to get everything back but try these :
1- try to find what you need on the n70 support page
http://europe.nokia.com/A4144775
check phone software.
2- if you have the download app installed on your phone , run it and check for the app there.if not check the nokia download store. http://www.download.nokia.com/
3- if your mamory card is not the original provided with the phone, locate your old memory card. using a computer copy and paste the following folders from the old original one to the new one:
* resource
* sys
* private (copy the subdirectories only and not the whole folder)
4- if something is still missing after all this, i guess it's gone for good
Fear not those who argue but those who dodge

Iphoto 11 has black edit screen

My iphoto 11 pictures are not visible in the edit screen and the slideshow will not run. I've tried everything that I know and I'm at the point of deleteing iPhoto and do a clean install. However, I'm not clear on the procedures and if I need to purchase iPhoto (it came pre-installed on my mid 2010 macbook pro). Or should I need do a clean install on my mountain lion?

Next move:
reinstall iPhoto.
To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
2c: on 10.7 they're at
/private/var/db/receipts
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
If you purchased it on the App Store or have a Recent Mac you can find it in your Purchases List.

How to remove mandatory field for Last Name in Personal Data Editing Screen

Hello All,
CUrrently we are using BP_ ERP5ESS1.31 SP5 & SAP_ESS 603 SP5.
All my ESS Services are Displaying fine and working from Portal.I am having the requirement like I need to make Last Name as Non-Mandatory field in Personal Data. While Editing the PD Screen, there i will find the * mark for Last Name filed, i checked through the Global Personalization Make as Mandatory is Not Personalized its showing, i think its defualt prpoerty,so i am unable make any changes from Portal w.r.t Global Personalization.
I checked in SPRO-- Personal Admin> Custmomizing User Interfaces>Change Screen Modifications, there i find the respective Module pool for those Infotypes and country Specific..
I cheked forModulePool MP000200--> P0002 and Variable Key-40(For India) P0002 - NACHIN -- LastName only OF Radio Button is Selected all other Rado buttons are not selected.
I Checked in V_T588MFPROPS view there for 0002 Infotype P0002 -- NACHN Mandatory check box is Checked all other check boxes are Unchecked.
How to make that Last Name field as Non-Mandatory in Personal Data Edit Screen, where i need to make the changes.'
Please list out the Steps..Where i need to do the configuration. And i assigned all the required ESS roles on the backend.
Thanks in Advance
Adapag

Hi,
I don't think supressing through Global Personalization will change the business logic. Within the Business Logic it checks for the mandatory field.
After the changes I guess you need to make the changes accordingly.
The below link might be of some help.
http://wiki.sdn.sap.com/wiki/pages/viewpage.action?spaceKey=profile&title=ESSPersonalInformationUIenhancementwithoutmodification&decorator=printable
Please correct if I am wrong.
Cheers-
Pramod

Field that is not visible in my editing screen but showing in web preview. How to remove it?

Hi Support,
When I preview my form in web preview, I am seeing a field that is not visible in my editing screen. It starts at the left margin of the web preview and runs off the edge of the right side of the page.
The form is also crashing when I attempt 'page view' or 'save as pdf' and I believe this phantom field is the culprit. I have spent considerable time on the form and do not want to recreate from scratch.
Can you please advise how I can make this field visible in the editing section so that I can permanently delete it?
Further information:
I do not have any rules set for any of my fields
I have tried to remove it in Chrome, IE and Firefox
My cache has been cleared today
My plug-ins and flash player are all current versions (updated today and performed a restart)
Thanks,
Kate

Hi Kate,
Could you please share your form with me ([email protected]) so that I can investigate and correct this problem? Instructions on sharing can be found here:
http://forums.adobe.com/docs/DOC-2462
Thanks,
Brian

Help, lost photos while transferring, can only see in edit screen

while transferring photos from my camera to iphoto some pictures did not fully transfer. I can see them as small icons on the edit screen but the picture is blank in the event, how can i recover? While I was tranfserring photos message came up that home disk was full and iphoto kept quitting? Please help

While I was tranfserring photos message came up that home disk was full and iphoto kept quitting? Please help
What part of "full" is not clear?
OS X needs about 10 gigs of hard drive space for normal OS operations - things like virtual memory, temporary files and so on. Without this space your Mac will slow down as the OS hunts for space on the disk, files will be fragmented, also slowing things down, apps will crash and the risk of data corruption - that is damage to your files, photos, music - increases exponentially.
Your first priority is to make more space on that HD. Nothing else can be done until you do.
Purchase an external HD and move your Photos and Music to it. Both iPhoto and iTunes can run perfectly well with the Library on an external disk.

Photoshop Elements 10 Edit Screen won't load

Photoshop Elements 10 Edit Screen won't load. It was working fine, then I responded to an Adobe Update. It stopped working. I re-installed Photoshop Elements 10 for MAC from the purchased Disc. The organizer works but not the editor. The organizer is not able to call the Editor either. I have uninstalled and reinstalled twice. I cannot get the editor to load it's editing screen or any images.
I'm really stuck.

Go to your username>library>preferences and delete:
com.adobe.PhotoshopElements.plist
Adobe Photoshop Elements 10 settings
Adobe Photoshop Elements 10 paths
repair permissions and try again.
Note: In lion, that library is hidden. In the finder, click the Go menu and then hold down the Option key to make it appear.

Address Book Edit Screen

All of a sudden in the EDIT screen for address book cards the colons between the subject type and the actual info has turned into an odd squiggle.
any one know how to get this back to the colon?
thanx all!

Hi Asher,
please check this article out: http://docs.info.apple.com/article.html?artnum=25398
In short, try to do the following:
1) try if you got the same problem in another user
2) if not, delete or move your com.apple.AddressBook.plist from your users' ~Library/Preferences folder (restart afterwards)
3) delete or move your users' ~Library/Caches folder
4) delete or move your users' ~Library/Fonts folder
!! Fiddling with the Library files can cause problems, so only do what I wrote above and do NOT start deleting or moving other files !!

How to get the preview and edit screen on the same size?

Hi!
I have a question about Adobe Premiere Pro cs6. When I import a video, the size is normal in the preview screen (the actual video's size), but when I insert it into the edit screen, it zooms in a little bit and I don't see everything in the video.
Though my settings are 'fit' and '1/2' for the preview window and also 'fit' and '1/2' for the edit window.
Does anyone what could be wrong? Or does anyone know how I can reset the settings to the factory defaults?
Thanks in advance,
Lotte

When I drag clips from source to timeline, they automatically are zoomed in. What do I do?

Edit screen won't show me my pictures to edit. Full screen goes black.

My first mac. Trying to import pictures from my external drive (FAT32) I imported all my photos, all looks fine, however, when I try to edit one, It takes me to the edit screen with all the photos in the event on top, but it doesn't show the photo I'm trying to edit. I even tried to look at photos fullscreen, and I get the black screen with the top and bottom bars, but no photo on the screen, and after a second, it just all goes black. Interesting thing though, is that I can play a slide show. Has anyone ever had this issue, any help for this newb will be greatly appreciated.

It could be a permissions thing. Launch iPhoto with the Command+Option keys depressed and follow the instructions to rebuild the library. Select the option to repair permission of the library.
Post back with the results.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
Note: There's now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

IPhoto won't open after crashing in edit screen

MacBook Pro v. 10.5.8
iPhoto v. 8.1.2
I was flipping through photos and editing them with the crop feature selected. I pressed the arrow key to go to the next photo (still in edit screen) when iPhoto crashed. The wheel kept turning and it was frozen. I did Force Quit, and since then the program won't open. I tried reinstalling 8.1.2 again--still no luck.
I don't know what parts of the error message would be helpful, but here's the first bit:
Date/Time:
2013-01-21 17:40:27 -0500
OS Version:
10.5.8 (Build 9L31a)
Architecture:   i386
Report Version: 4
Command:
iPhoto
Path:
/Applications/iPhoto.app/Contents/MacOS/iPhoto
Version:
8.1.2 (8.1.2)
Build Version: 8
Project Name:   iPhotoProject
Source Version: 4240000
Parent:
launchd [74]
PID:
680
Event:
hang
Time:
5.04s
Steps:
25
Process:
iPhoto [680]
Path:
/Applications/iPhoto.app/Contents/MacOS/iPhoto

As a Test:
Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?

Crash when saving photo when contact edit screen open - anyone else?

On two separate iPhones I have experienced a crash when saving a photo taken from "inside" the contacts edit screen. In both cases the photo app would capture the image and attempt to save. The screen goes black for about 5 seconds then returns to the home screen. The photo is not in the camera roll and the image container on the contact editor screen is empty.
iPhone G3, 16GB, v2.2 <--both phones tested
Sequence: Open Contacts, locate existing entry, tap "edit", tap "add photo", tap "take photo", shoot picture, tap "set photo", system shows "saving photo" pinwheel, then screen goes black.
Doesn't happen every time. One instance corrupted the mail application and applied a false name in the "from" field for many of my emails. Remedy: Reload v2.2 software and restore from backup.
Anyone else see this behavior?

I have had this same problem. As best I can recall, I have the problem every time. I've certainly updated software, reset software and reinstalled 2.2 for my phone, for other reasons. And, I've gotten another friend to duplicate the problem. My workaround is to save the contact info and then take the picture from the camera and then reopen and edit the contact and add the picture. It's just that, sometimes, I make a leap of faith and try to take a save a picture from within the contacts. It's a teeny, minor embarassment when I then have to ask a person for their info again, as the contact crashes before it's been saved.
Mostly, I'd enjoy the elegance of being able to add contacts and their photo at the same time. I know that's what is intended by Apple.
I don't intend to newly install 2.2 software, etc. with my iPhone to try and solve this problem. Just seems like a waste of time at the moment. I just want to state that it's a problem and it would be meaningful for Apple to correct this in 3.0
Life with the iPhone hasn't been perfect, but it has been awesome!
Graham

ADF Edit Screen from Search Screen

Similar Messages

Maybe you are looking for