ADF Faces selectOneChoice does not raise valueChangeEvent all the time

When using the following code in my JSF page:
<af:selectOneChoice id="yearChoice" autoSubmit="true" value="#{selectedDate.startingYear}" binding="#{selectedDate.yearChoice}" required="yes" valueChangeListener="#{selectedDate.valueChanged}">
<f:selectItem itemLabel="2005" itemValue="2005" />
<f:selectItem itemLabel="2006" itemValue="2006" />
<f:selectItem itemLabel="2007" itemValue="2007" />
<f:selectItem itemLabel="2008" itemValue="2008" />
<f:selectItem itemLabel="2009" itemValue="2009" />
</af:selectOneChoice>
The valueChangeEvent is fired most all of the time, but when you change the choice back to whatever the original was set to, it does not fire. It only fires when you choose something other than the original selection. Even after selecting other values.
Any help would be greatly appreciated.

Set "immediate" to false on all of the showDetailItems inside the showOneTab. It currently defaults to true (unlike all other uses of "immediate"); we may revisit that decision shortly.

Similar Messages

  • ADF FACES  showOneTab does not raise valueChange events

    Hello all,
    the next problem with showOneTab tag:
    when changing to another tab, the input components like inputText or selectOneChoice do not get notifications about value changes, so the changes get lost.
    Is it a bug, intention or one can do something against it?
    Regards,
    OR

    Set "immediate" to false on all of the showDetailItems inside the showOneTab. It currently defaults to true (unlike all other uses of "immediate"); we may revisit that decision shortly.

  • Sound does not work correctly all the time, on youtube.

    So I have been having this issue for a while now, and I have tried everything to fix it on my own.
    My issue is sometimes you-tube videos will play about 1-2 sec of sound then stop, the video will buff all the way out and I can watch it but no sound will come from it. Once it happens if I try to watch another video they will all have no sound, but if i start up itunes it will still play music, so it's not my PC.
    Once I close Firefox and reopen it 80% of the time it will play sound on the same video, the other 20% of times it will play 1-2secoinds of sound again and quit playing sound, if I restart fire fox again it will play just fine. Also I do not seem to get this issue with internet explore.
    Stuff I have done.
    Check for updates for my video/sound cards.
    Uninstalled/installed flash 3 times even downloads the Adobe Flash player uninstaller, then reinstalled flash again.
    Unchecked enable hardware acceleration, in the Adobe Flash setting.
    My setup
    Firefox 3.6.13
    Windows 7 64bit
    ATI HD radeon HD 4350 video card.
    I have my PC connected to my TV, sound/video is carried with a HDMI cable from my video card.

    Did you check the settings for Firefox in the Volume Mixer?
    See also:
    * [[No sound in Firefox]]
    * [[Video or audio does not play]]
    * http://kb.mozillazine.org/Video_or_audio_does_not_play
    You can also try to clear the Flash cookies and settings.
    Flash Website Storage Settings panel:
    * http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager07.html
    See also Flash Local storage settings:
    * http://www.macromedia.com/support/documentation/en/flashplayer/help/help02.html

  • Downloaded iTunes 11.0.2.26,the print CD jewel case does not print right,all the songs listed are printed in about a 1/2in. space,how can I get it to print right

    Downloaded iTunes 11.0.2.26,the print CD jewel case does not print right,all the songs listed are printed in about a 1/2in. space,how can I get it to print right

    I recently upgraded to itunes 11.0.1.12 and that fixed the CD Jewel Case Insert song titles problem. Thanks itunes. It's working great!!.

  • Having problems with ipad mini and Siri. Works sporadically, will work once and then the second time not. Worked all the time with the original Mailbox app. Then started doing the same thing when I installed the new update so wondering if it is software?

    Having problems with ipad mini and Siri. Works sporadically, will work once and then the second time not. Worked all the time with the original Mailbox app. Then started doing the same thing when I installed the new update so wondering if it is software?

    Hi,
    I have the check box on a second Partition  but not on the Time Machine one
    I forget what I did now to get this called "Recovery HD"
    For the rest try https://discussions.apple.com/docs/DOC-4055  User Tip that links to Pondini's work on Time Machine.
    10:17 pm      Friday; May 2, 2014
    ​  iMac 2.5Ghz i5 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • I recently uploaded OSX 10.6.7 and ever since then, my Boris titler in FCP does not work with all the fonts, notably Avenir. It actually crashes FCP now. It was fine with the previous version. What's up Apple?

    I recently uploaded OSX 10.6.7 and ever since then, my Boris titler in FCP does not work with all the fonts, notably Avenir. It actually crashes FCP now. It was fine with the previous version. What's up Apple?

    I know what your'e going through, Gary.   OSX 10.6.7 is an absolute disaster.   Since I upgraded, I've had problems in FCP, Logic, Garageband, even issue dealing with peripheral hardware like external monitors.
    Before 10.6.7 my system was running fine.
    I've brought this up with Apple repeatedly.   They smile and shrug.   They've been helpful resolving the issues, but none of them has been easy to solve.  I have spent days, dealing back and forth with tech support, sending logs, etc., before solutions have been found.  
    I wish I could give you an answer to your question.   My only guess is that Apple has totally dropped the ball on this one.   In the future they should provide a disclaimer when they offer an upgrade.  Something like:   "Caution: all of your software may not function after this upgrade. But go ahead, you'll feel cool that your OS is the latest thing."
    As someone who has been with Apple for close to 25 years, I'm disturbed by what appears to be an increasing sloppiness in their work.   This is especially disturbing when you depend upon their system to make your living.
    Good luck.
    david

  • Re: Satellite Pro A300 - DVD drawer does not open most of the time

    I have a Satellite Pro A300-1NH laptop. The DVD drawer does not open most of the time. Occasionally it does, but most of the time it does not.
    Sometimes if I manage to get a DVD/CD into the drawer to burn something to, the burn works.
    Most of the time the computer does not recognise that there is a disc there, and then I can't open the drawer again to get it out.
    Can anyone tell a novice what I need to do to sort this out please?

    Have you noticed this when you try to open drawer using eject button in the drawer itself?
    Almost every player has integrated eject button. Can the drawer be opened using this eject button?

  • Downloaded ios7 to my iphone4s and now my volume control does not work 99 % of the time. what can i do to solve the problem

    I downloaded ios7 to my iphone and now my volume control does not work 99% of the time. Is there something I need to do to correct this?

    Adjust the Volume Control in Control Center, or try a RESET.............

  • Why does Adobe Flash crash all the time? It is reallyt annoying and I'm considering using another browser. Please tell me how to fix this.

    Why does Adobe Flash crash all the time? It is really annoying and I'm considering using another browser.
    Please tell me how to fix this.

    Try to uninstall your current Flash version and update Flash to the latest version.
    Troubleshoot Flash Player installation for Windows:
    * http://kb2.adobe.com/cps/191/tn_19166.html#main_Uninstall_the_older_Flash_Player_version
    *http://www.adobe.com/software/flash/about/
    *https://support.mozilla.com/kb/Managing+the+Flash+plugin
    *http://kb.mozillazine.org/Flash

  • My computer does not start up all the way

    When i start my computer up, it goes through all the steps, but my hard drive never loads and just the wallpaper and the spotlight show up. I have to force quit and start the computer in safe mode and then restart the computer to get it to start all the way. Is there any thing that can be done so that my computer starts right all the time the first time?

    annie1977-
    Greetings and welcome.
    Try booting from the system install CD/DVD by putting the disk in the drive and starting up while holding down the c key.
    After boot-up find the Disk Utility, either on the desktop or under the Apple menu. Select your startup drive and the repair permissions on that drive. See if that helps.
    Luck-
    -DaddyPaycheck

  • HT201401 My iphone 5 volumn down button does not work most of the time. it feels fine.  in an otterbox defender. this is my second iphone that it is doing the same thing.

    i have a iphone 5. the volume button going down only does not work.  this is my second phone with the same problem.  i have had otterboxes for both phones.

    Does not work even with the case off. I formatted and rebooted, reset, called apple and sent the last one back. It was free but this is getting old. I have had all iPhones and this is the only one I have had issues.

  • Im gettin flash sms about not enough credit all the time! help :*

    Hi guys im gettin Alerts with BIG DISMISS about not enough credit for service.... ANd im getting it all the time   Please help me without jailbbreak   or something :S  When i press the top button to lock and when i press Home i got it ! always and its annoying i didnt had this problem...  class 0 or flash msg with big green dismiss button about not enough credit LL THE TIME...

    this is not an iphone issue it's an issue with your phone network provider

  • Yosemite will not start - stalls all the time. Cannot use MacBook

    Installed Yosemite when it was released.
    Has worked fine until today.
    When waking up from sleep, went into spinning beach ball mode. Tried restarting but stayed the same.
    TRied reinstalling Yosemite but this made no difference.
    have Yosemite Beta on separate partition. Booted to this, started ok but went unresponsive after a few minutes
    help!

    hello,
    all the temperature apps(smcfans, istat, temperature gauge) sense the temperature only when i'm charging my mac or when the mac start to become hot. at the rest of the time it just stuck on tne lest temp he sense.
    i use now macbook pro retina 13 heswell and in my old macbook air 13 sandy bridge the temp apps sense the temp all the time like it should be.
    is it normal? is it part of the "haswell saving energy”?

  • Please tell me all the sound specs i need to set up in logic x to have success recording; my output channel does not output most of the time; i use analog lab as well

    please help me set up all the sound specs/preferences both hardware and software wise for logic x on mac book pro...i am unable to hear any audio playback when i record a track...no activity in output channel

    itunes can share music over the network without an internet connection, but you will need a computer running itunes powered on to be able to share it (setup in itunes by going to file (windows) or itunes (mac) > preferences > sharing)
    if you just want to setup a network attached storage drive for the network that holds all the music that would be done independently of itunes and you would need a compatible NAS drive (I don't believe the airport is technically a nas drive but you could ask that section of support communities as well https://discussions.apple.com/community/wireless/airport)

  • Laptop starts up but screen is black(does​n't happen all the time) PLEASE HELP

    I own a Toshiba Satellite L505-S5966. It's 4 years old and for the most part I haven't had any problems up until recently. The first problem was it started to say "battery not detected" and saying my battery was in poor health and to replace it. Well I did replace it but it still continues to say not detected, but that is the least of my worries. I will say my AC adapter isn't the original as I had to replace that about 2 years ago.
    One day while using my laptop, the screen just went completely black. I turned it off and tried to turn it on and nothing. Looked up some stuff on Google which said to clean out the dust, which I did. I also took the battery out and held down the power for 60 seconds. Well after doing that it seemed to work fine until the screen went black again. I did it again and it seemed to work. But sometimes when I turn the computer off, and try to turn it on, I can here it come on but screen stays black. If I wait a while it will work though.
    Well it keeps doing this on and off. Other issues I have had is 2 times a blue screen came up. Once it was too quick to read but another I did have a chance to read it and it said something about "APC_INDEX_MISMATCH." Also about 2-3 time I've gotten a screen that said "Interactive Services Detection- The program is no longer requesting attention...." while online but I can always hit "return now" and everything is good. And then recently when I went to turn my laptop on a screen came up saying "Windows loading screen" but it froze up and never loaded anything so I had to hit the power button to restart.
    I know it's not good to hit the power button to restart but it's the only way I can get it to turn off because whenever the screen is black or on the blue screen, the keyboard doesn't work at all. I would like to mention sometimes I have to restart because the keyboard will freeze up and nothing will work. The keyboard is brand new, I just recently replaced it but I know I installed it correctly. Everything else is also correctly in place as well.
    I've ran anti-virus and malware scanners both in safe mode and not. Everything says it's good and shows no viruses or anything. I also did a memory diagnostics and it too came back good. I didn once mess with the toshiba diagnostics and it said my harddrive failed but I read on Google that the Toshiba diagnostics tool isn't reliable and many get a harddrive failure when it's not the case.
    I would really like to know what could be wrong with my laptop. I haven't took it anywhere to be looked at because I don't want to pay $50 to find out it will cost $300 to fix. I'd much rather see if I can find out what's wrong online before having to take it anywhere.

    gottarace wrote:
    I have a L675d-s7100 that lost a harddrive. Since it crashed I had no restore. So blew 40 bucks on disc from toshiba.
    New Drive installed. disc get here. reset to day via disc. Started up ran good for about 3 days. BLUE screen.... reboot all was good. Then it started to happen more often..  Now about a Month later. The display will just go black. you have to let it set hours with battery out and power cord off. reboot all is good. NOW display won't come on. hit power it clicks and fan comes on and nothing.  Hooked up to ext  did the FN F5 and still nothing. I put the olg drive back in. it would at least light the screen. Nothing..  Anybody have any ideas???
    Thanks all...
    Todd
    In the future if you could, just start your own thread just to make things easier to keep track of.  If you did and didn't get a reply (wait at least a few days), then you can bump so it goes back to the top.  OK, sermon over
    When you get a blue screen, what was the error message.  One of the first things I do when I get a computer is go into the settings and disable the restart on system failure so it doesn't go into a boot loop and I can read the error message.  I don't know why that is set that way on default.
    If you hooked up the computer to an external display and still not getting anything, then it suggests its not a bad display. 
    Can you get into the bios?  Can you access the recovery partition?  If you have another working computer available, can you connect your new and/or old drive and do a diagnostics on to see if there are any errors?  Besides the new hard drive, have you done anything else to the computer like upgrade ram, etc?  You can also try and reseat the ram. 
    If you can get to the recovery partition, you can try a system repair.  Of course this will only work if the problem is software.  If it is a hardware issue, you have to try and isolate it (i.e., drive, ram, battery, etc.).
    L305-S5955, T9300 Intel Core 2 Duo, 4GB RAM, 60GB SSD, Win 7 Ultimate 64-bit

Maybe you are looking for

  • Group GL V/s GL Report is working differently in Production and Development

    Dear Experts, I have created one Report which displays Group GLs and its Cumulatve Balances. The Format is is as below : Items                   Balances 1001                     XXX 1002                     XXX 1003                     XXX 1100     

  • Business Explorer 7.10 -- Bex Problem

    Hi to all, we have implemented GUI for Business Explorer 7.10. Everything (Query Designer, Web Designer) works fine, except Bex Analyser. When click on any item in Bex Analyser Toolbox (Excel) nothing appears. Analyser 3.x that comes with GUI 7.10 wo

  • Changing Default Project Directory

    Does anyone know how to change the default project directory? I can move events; that's no problem. But I can't seem to move the default project directory off my main MacBook Pro drive. Thanks.

  • UDM_DC_NOTES_GET -   run time error - TSV_TNEW_PAGE_ALLOC_FAILED

    I am getting below run time error while program executing ( program execution time one hour  )  .    " No more storage space available for extending an internal table." suspecting below code causing issue: LOOP AT IT_ITEMS INTO WA_ITEMS. CALL FUNCTIO

  • Order by lookup item

    Hi, I have a base table block with a lookup table, I want my results be ordered by one item of the lookup table!!! when I set the order by sequence and set order properties, no sort is done in the result query, the sort is done in the lov of the look