ADF on mobile issues

I am using Jdev 11.1.1.5.0 - weblogic 10.3.5.0 Standalone, I deployed my project on static IP. I can access and transact the project fine in web browsers.
fine.
Now I am trying to access the URL from mobile(Android version - 2.3.6 [GingerBread.DDKL2]) through Opera mini.
I get the following message on mobile screen,
OracleJSP error
java.io.FileNotFoundException:
Set the init-param debug_mode to "true" to see the complete exception messageok. Another scenario, If i try to access the URL from Chrome(mobile - Android), I can view the page but not able to proceed on button actions. I used command toolbar button.
No log on my server.
How can i overcome it.
Suggestions are appreciatable.
-raka

Thanks Shay, As you said i upgraded my Jdev.
What specific problem do you see when you are using the chrome browser on Android?First I am checking Chrome Browser on ios. No specific error. But af:popup is not working. af:commandmenu is not working.
-Thanks

Similar Messages

Sharepoint 2013 online mobile issue.

Dear all,
When I try to fill out a form in mobile view on the iphone or android phone, the person or group column doesn't work at all.
And when I try to approve a workflow I created with 2010 workflow, the page is just blank.
basically everything is so broken under mobile view, but works under pc view on the phone.
Anyone has any quick fix to this? I really need the mobile view to work properly. I know I can disable the mobile view, but I have to keep it. Thanks.
Timothy Liu

Hi,
According to your post, my understanding is that you had Sharepoint 2013 online mobile issues.
Please make sure you configure the mobile view correctly. You can refer to:
Configure a SharePoint site for mobile devices - SharePoint Online for enterprises
Use a mobile device to work with SharePoint Online sites
Regarding SharePoint Online, for quick and accurate answers to your questions, it is recommended that you initial a new thread in Office 365 forum.
Office 365 forum
http://community.office365.com/en-us/forums/default.aspx
Thanks,
Jason
Jason Guo
TechNet Community Support

Wireless WISM and 4402 DMZ controller mobility issue

Hi all,
I have a really weird wireless mobility issue I need help with. I have a Wism installed in our cat 6 with version 7.0.98.0 of software. I also have a 4402 controller in the DMZ acting as an anchor controller to terminate guest traffic, also running the same version of software. The mobility anchor is setup on 4 SSID's and most of the time I don't have an issue with it.
However every week or so the data path or control path will randomly go down, so no guest traffic. Timers are configured as 10 seconds for the keep alive count and 20 seconds for the keep alive interval. I have found the following syslog information from our NMS. Not sure what these errors are and if its anything to do with this random mobility issue.
Any thoughts ??

A traceback is a device producing a trace of where it was in the software code when the problem occured.
Most often it's when a function fails/crashes. Although that is not always true.
If you have the syslog to the deepest level of debug, you will see harmless tracebacks (functions that returned no result but that might be expected). On higher level of debugs only "crashing" tracebacks are shown. In this case, the fact that you have mobility issues and tracebacks related to mobility is highly suspicious.
TAC can decrypt the traceback hex and find the exact part of code that created the problem. From there, they can link it to an existing bug (or a new one maybe ?).
Hope this clarifies !
Nicolas
===
Please rate answers that you find useful

HP Deskjet 460 mobile issue v2

Still waiting for a response and fix to this post:
http://h30434.www3.hp.com/t5/ePrint-Print-Apps-Mobile/HP-Deskjet-460-mobile-issue/m-p/1806419#M26455

Your model of printer does not support ePrint. It supports bluetooth printer and for that to work, the OS that you are trying to print from must also support bluetooth printing. I do know that neither the iPhone iOS or Android operating systems to do not support native bluetooth printing.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

ADF Application Runtime issue in StandAlone Weblogic Server

Hi All,
I tried deploying my ADF Mobile Browser Application in a StandAlone Weblogic Server. The application was targeted to Admin Server and everything worked fine.
But when Targeted to Managed Server the login page alone was rendered (without CSS). Tried loging in with correct as well as wrong passwords but there was no response from the page. (Login button acted like a dummy one)
Even the managed server log had no error messages.
DataSource where configured correctly and targeted both to Admin n Managed Server.
I tried deploying the same in Client's Testing Environment and the same problem occured even in Admin Server.
I couldnt figure out wats the issue.
PS:
Weblogic Server Version : 10.3.6
ADF Runtime:11.1.1.6
JDeveloper Version : 11.1.2.1
The App Contains ADF Authentication Security. Will that cause any issue?
Two Cents
Karthick

Your jdev version and the adf runtime on the wls have to match. Check http://tompeez.wordpress.com/2011/09/14/jdeveloper-versions-vs-weblogic-server-versions/ for a list of matching versions.
Timo

ADFS 3.0 Issue - Caching Bad Passwords

We have come across a slightly odd problem with ADFS.
For over a year now we have been running ADFS 2.0 for our Office 365 Enterprise Mail, the solution was set up as default ( with the obvious exception of Certs and passwords it was plain next, next next and take all the defaults ) and this has been perfect
all this time.
We just used the same method for a nice default install of ADFS 3.0 and we have switched one of our smaller domains to use it as a test, however we have come across a very annoying issue.
If a user opens Outlook, they get a password prompt as usual, if they put in the password all is perfectly fine, if however they accidentally typo and put in the wrong password, when the password prompt finally comes up a second time, it dosent seem to care
if they put the right one in, it sends the first password again, and keeps going no matter what you do until the account is locked out, the only way to fix it is to close and reopen outlook.
I'm sure many people will not read or understand this correctly and just say it's a setting or some other issue with Outlook etc. but bear in mind I can even switch this domain back to our ADFS 2.0 setup and do the same test with the same user and the same
machine, and everything works as you'd expect, and typing the correct password the second time leads to authentication. This must therefore be an issue or difference between ADFS 2.0 and 3.0, or perhaps its just a plain old bug, who knows, all I do know is
that it's an issue that causes some very annoyed users, and we cant complete our update to ADFS 3.0 until this is fixed.
I have read a few ADFS 3.0 articles that suggest that using a GMSA account ( the default ) may be to blame so I am investigating using a normal account as the service account, but that does unfortunately seems to entail a reinstall of ADFS to accomplish
so will take a little time to switch.
Any help or ideas would be appreciated.

Hi David,
I just tested this on Outlook 2013, after input a wrong password, the password prompt popped out without any error message, and the wrong password was cached (displayed as ********), if I click on OK, the password prompt will popped
back with wrong password again.
Is this the issue which you were referring to?
If that’s the case, then it is a normal behavior, by design at least. To avoid account lockout, every time the password prompt pops out after a failed logon attempt, we need to clear the password, then input a correct one manually.
Best Regards,
Amy

Adf table columnStretching issue when using with in panel splitter

My Scenario is like this:
I have used adf table with columnStretching to last column of table. And the table is placed at second facet of panelSplitter. On load it covers full area of second facet which is pretty good. When try to collapse panelSplitter, arround 2 pixel of horizontal scrollbar appears at bottom. Even on uncollapse the panelSplitter to original orientation, the extra space remains there which makes horizontal scrollbar with 2 pixel gap for movement at bottom of table.
Is Anyone facing this kind of issue? And how can I solve the issue?
Thank you for your help and responses in advance. YOur help will be very much valuable to me.

Hi Frank,
I am using FF, Chrome and also IE in different compatibility mode. While wrapping with panelCollection it works fine. But the menu bar section and status bar is introduced on panelCollection which I cannot use in my work.
-Robin

ADF Table filter issue with OR or AND input value

Hi all,
adf:table filterable fields for OR or AND input value not works. Actually One of column is for State and it has "OR" value for -> OREGON State.
and I tried using filterModel and queryListener for table attribute. But I am not getting exact clue where I need to fix for this issue. Any suggestion and help is appreciated greatly.
jdev version 11.1.1.3
Thank you.
- Robin

Something like this might work for the one case:
public void handleQuery(QueryEvent queryEvent){
    // Replace the OR with an equivalent condition
    Map m =
      ((FilterableQueryDescriptor) (queryEvent.getDescriptor())).getFilterCriteria();
    for (Map.Entry entry: (Collection<Map.Entry>) m.entrySet())
      if (entry.getValue() != null &&
          StringUtils.equalsIgnoreCase(entry.getValue().toString(), "OR"))
        entry.setValue("O AND _R");
    // Process The Query
    ELUtils.invokeMethod("#{bindings.VOQuery.processQuery}",
                         QueryEvent.class, queryEvent);
    // Put the OR back
    for (Map.Entry entry: (Collection<Map.Entry>) m.entrySet())
      if (entry.getValue() != null &&
          StringUtils.equalsIgnoreCase(entry.getValue().toString(),
                                       "O AND _R"))
        entry.setValue("OR");
}

Adfs 2.0 issue with claims

Dear technet members,
Our ADFS 2.0 (Windows 2008 R2) fails to obtains (retain after period of 20 hours) claims for "newly" created users (objects). Our AD has more than 14000 users. We see this our web applications when we query for claims (we see that we are
missing important claims). We are missing only the objects (groups) that were created lately (let say that after 8000 users).
We need to restart the ADFS server sometime more than two times :) and make gpdate /force to have all the claims on the ADFS site.
ADFS server is on DMZ under proxy web firewall and the ping is 1 ms to the DC (which is on isolated LAN).
The only events that we have from the servers are event id 111 ( LogonUser failed for the 'user1234' user) followed by event id 364 (Microsoft.IdentityServer.Web.AuthenticationFailedException: ID3034: Authentication failed.).
We have raised this issue in technet forum and still have got an proper answer. Does anybody have a clue why this is happening?

Hi Pierre,
Yes Pierre this is happening everyday and the users that fails to log-in are users (objects) that were created recently. After restart ADFS server (ADFS installed separately on DMZ) obtains all the claims and everything is fine but after a while (12 - 20
hours) ADFS can not retrieve claims (objects) that were created recently.
Here is the claim rule for the web application.
Claim Rule Name:XXXXX
Rule Template: Send LDAP Attributes as Claims
Attribute Store:Active Directory
LDAP Attribute Outgoing Claim Type
===================================================================
Token-Groups - Qualified by Domain Name
Role
User-Principal-Name Role
User-Principal-Name Name
Please feel free is you need additional information.
p.s. the replication for all DC shows no errors (last successfully time is current)
Regards,
shkumbini

Windows Mobile issues re Flash Player

Hi - I am trying to install Windows Mobile on to my PC and it is proving a frustrating experience. Each time I try to load it states "You need Flash Player 8 or later. If you already have it this might be corrupt so please re-load" . I have tried installing FPlayer (v10) many times and am told that this has been successful, however I cannot progress past this same comment "You need..." i.e. cannot load the disk. I have searched this issue and it seems that there is a known issue regarding MS / Adobe Flash Player - something to do with 'permission' but I am unable to find anywhere that (i) explains this so that I can understand it (ii) suggests a solution in layman's terms (iii) has a link to a solution that works - they all say Error. I have tried re-booting, closing all apps before uninstalling old Flashj Player etc but no luck. Any suggestions much appreciated !

Hi Devin,
You would still need the (full) Flash 9 player on your mobile as that is the version of Flash that Xcelsius is generated for. Flash Lite will not work either because that is a cut down version of the flash player...
Maybe Adobe will create Adobe AIR for mobile devices (and support the Flash 9 player), we'll have to wait and see what happens...
Regards,
Matt

Acrobat Reader DC Mobile Issues

Ok ARDC Mobile is giving me some grief. I am trying to make some fill-able forms for some of our people to fill out in the field. They will be using Android Tablets to fill out these forms. They will be using the same form over and over but need to be able to save a copy of the form filled out and blank the current form. The issue I am having is I can't save a copy of the document locally to the device. The only thing I could get to work was trying to print the document but automatically tries to go to google drive but no save as pdf option. They have to be able to save locally because most of the time they will not have access to wifi or cell phone signal and they will be using the free version of ARDC.
Is Adobe now requiring you to have a subscription to save a copy locally? or did I just miss something?
Also I can't seem to find anything that list what functions work and don't work on Android. Nothing beyond text fields, radio buttons, check boxes, and a few others seem to work. Button functionally doesn't work at all, even Save As, and nearly everything else doesn't work. I get everything is written in Java..... which doesn't really work on mobile devices........ What actually works on Mobile?

ManiacJoe,
If this does not work for you, please let us know.
Thanks,
-Amboo

ADF desktop integration issue

i have created a application and published to weblogic successfully, but when i tried to run my integrated excel workbook, i got following errors. how to resolve this issue ?
ADFDI-00134: An attempt to connect to the web application has failed.
ADFDI-00501: An unexpected status: 500 (InternalServerError) was returned from the server while requesting the URL: http://localhost:7101/myDITest/adfdiRemoteServlet
~~~~~~~~~~
ConnectionFailedException: ADFDI-00134: An attempt to connect to the web application has failed.
Source: adfdi-excel-runtime
Stack:
at oracle.adf.client.windows.excel.runtime.WebAppLogin.GetAuthenticationMode()
at oracle.adf.client.windows.excel.runtime.WebAppLogin.Login()
at oracle.adf.client.windows.datamanager.ADFBindingContext.AttemptLogin(Boolean maybeHadSession)
at oracle.adf.client.windows.datamanager.ADFBindingContext.SyncModel(BindingContainer bc, String contentType)
at oracle.adf.client.windows.datamanager.BindingContainer.ReloadMetadata()
at oracle.adf.client.windows.datamanager.BindingContainer.LoadMetadata()
at oracle.adf.client.windows.excel.runtime.DIWorksheet.InitializeComponents(Boolean isFirstLoad)
at oracle.adf.client.windows.excel.runtime.DIWorksheet.Initialize(Boolean initializeUI)
Inner:
UnexpectedHttpStatusException: ADFDI-00501: An unexpected status: 500 (InternalServerError) was returned from the server while requesting the URL: http://localhost:7101/myDITest/adfdiRemoteServlet
Source: adfdi-excel-runtime
Stack:
at oracle.adf.client.windows.excel.runtime.WebAppLogin.GetAuthenticationMode()
yong

There is some kind of configuration problem with your web application.
First, you should report the version of ADFdi you are using.
Next, you should verify the configuration against the guide.
http://docs.oracle.com/cd/E24382_01/web.1112/e16180/prep_dev.htm#sthref25
Next, you should perform some diagnostic steps.
http://docs.oracle.com/cd/E24382_01/web.1112/e16180/ap_desk_integ_troubleshoot.htm#CHDIBEEE
HTH
Alex

ADF editable table issue

Hi, I drag and drop an expert mode updatable VO to create an ADF editable table with inputText components associated with the table columns. This table is also binded to a CoreTable object inside the backing bean of the page. I also have a "Save" button which has actionLister binded to the backing bean to handle the saving for user's input data.
Basically, I have 2 rows and 2 columns for the editable table. I entered "ABC" for the first row and first column and entered "DEF" for the second row and first column like the following:
| Column 1 | Column 2 |
| ABC | |
| DEF | |
In the backing bean's saveChanges method, I do:
public void saveChanges(ActionEvent actionEvent) {
int rowCount = this.testCaseTable.getRowCount();
for (int i=0; i<rowCount; i++) {
JUCtrlValueBindingRef rowDef = (JUCtrlValueBindingRef)this.testCaseTable.getRowData(i);
TestCaseRowImpl row = (TestCaseRowImpl )rowDef.getRow();
System.out.println("Column1 Data: "+row.getColumn1());
System.out.println("Column2 Data: "+row.getColumn2());
I am expecting to get "ABC" for the first row column1 data and "DEF" for the second row column1 data. However, the actual result is both "DEF" (the last entered value) for both the first and second row column1 data.
What can be the potential issues of my codes? How can I get the correct user input data?
Thanks.

Hi
You can obtain this data from iterator:
DCBindingContainer bc = getBindings()
DCIteratorBinding iter = bc.get("YourIteratorNameIterator");
while(iter.hasNext()){
Row row = iter.next()
System.out.println("Column1 Data: "+row.getAttribute("Column1"));
System.out.println("Column2 Data: "+row.getColumn2("Column2"));
Kuba

ADF SelectAll/DeselectAll Issue

Hi All,
Iam having issue with SelectAll/DeselectAll in ADF Tree. Following sample code for jspx and Managed Bean.
<af:tree value="#{bindings.ParentMDTopic1.treeModel}" var="node"
selectionListener="#{bindings.ParentMDTopic1.treeModel.makeCurrent}"
rowSelection="single" id="t1" partialTriggers="sbc2"
binding="#{pageFlowScope.mBean.treeProp}">
<f:facet name="nodeStamp">
<af:group id="g1">
<af:selectBooleanCheckbox label="Label 1" id="sbc2"
value="#{node.checkboxFlag}"
autoSubmit="true"
valueChangeListener="#{pageFlowScope.mBean.checkBoxChange}"/>
<af:outputText value="#{node.DocGuid}" id="ot1"/>
</af:group>
</f:facet>
</af:tree>
Bean:
public void checkBoxChange(ValueChangeEvent valueChangeEvent) {
valueChangeEvent.getComponent().getParent().getChildren();
DCIteratorBinding dcIb = ADFUtils.findIterator("ParentMDTopic1Iterator");
ParentMDTopicVORowImpl parent = (ParentMDTopicVORowImpl)dcIb.getCurrentRow();
RowIterator ri = parent.getLeafMDTopic();
if (((Boolean)valueChangeEvent.getOldValue()) != null) {
Boolean check = (Boolean)valueChangeEvent.getNewValue();
if (check == true) {
parent.setcheckboxConfirmedStatus("Y");
} else {
parent.setcheckboxConfirmedStatus("N");
selectItems.add(new SelectItem(ri.getCurrentRow()));
if(ri.hasNext()){
updateCheckboxStatus(ri, check);
else{
parent.setcheckboxConfirmedStatus("N");
refreshSelectedRows();
dcIb.executeQuery();
public void updateCheckboxStatus(RowIterator ri, Boolean check){
while(ri.hasNext()){
LeafMDTopicVORowImpl leaf = (LeafMDTopicVORowImpl)ri.next();
if (check == true) {
leaf.setcheckboxConfirmedStatus("Y");
} else {
leaf.setcheckboxConfirmedStatus("N");
selectItems.add(new SelectItem(ri.getCurrentRow()));
RowIterator ri2 = leaf.getDocGuidLeafMDTopic();
if(ri2.hasNext()){
updateCheckboxStatus(ri2,check);
private void refreshSelectedRows() {
getSelectedRows().clear();
DCIteratorBinding it = ADFUtils.findIterator("ParentMDTopic1Iterator");
RowSetIterator rit = it.getRowSetIterator();
rit.reset();
if (rit.first() != null) {
Row r = rit.first();
if (r.getAttribute("checkboxFlag") != null) {
makeRowSelected(r);
while (rit.hasNext()) {
Row r = rit.next();
if (r.getAttribute("checkboxFlag") != null) {
makeRowSelected(r);
private void makeRowSelected(Row r) {
Boolean selected = (Boolean)r.getAttribute("checkboxFlag");
if (selected) {
ArrayList keyList = new ArrayList();
if(r.getAttribute("DocGuid") != null){
keyList.add(r);
getSelectedRows().add(keyList);
Iam strugling since few days on this. Could you please some one on this
Thanks in advance,
Samba.

HI Timo,
Please find the below information.
which jdev version you are using as the solution might depend on it.
Ans: JDev 11.1.1.5.0
So, what is the problem?
Ans: We have created a tree structure with checkbox option using self -reference VOs & ViewLinks.Problem is unable to achieve Select All/Deselect All functionality. And also, If user click on any node, then all the chield nodes(till leaf level) should be in checked status. similarly for deselect option. Only the one node is updating with status. Rest all are not updating in the with check box status.
What have you tried so far?
Ans: As of now, I am trying to achive select functionality by seleting top level nodes.There might be more than one node at top level, if I click on any one on of top nodes then all the sublevels should be check status.
Have you drugs the code?
Ans: I tried to debug the code with print statements. I've created two transient attributes with boolean & string types. Boolean value will be calculted based on String value using EL. Some how, I couldn't able to achive the required functionality.
It would help if you fishing your code when posting it here. Read the FAQ link on the top right of the page.
I've gone through OTN forum to find a thred with similar issue. I found few threds with similar issue but still iam facing issue.
Please let me know, if you still need more information.
It would be really helpful, if you help on this.
Thanks,
Samba

ADF LDAP Integration Issue

Hi Experts,
I am new to ADF Development, and trying to implement LDAP in my application. As per some forums i am using ADF Security. I have modified my WebLogic server, myrealm with LDAP details and added below mentioned codes in JPS-Config.xml file:
      <serviceProvider type="IDENTITY_STORE" name="idstore.ldap.provider"" class="oracle.security.jps.internal.idstore.ldap.LdapIdentityStoreProvider">
         <description>LDAP-based IdentityStore Provider</description>
      </serviceProvider>
        <serviceInstance name=idstore.ldap provider=idstore.ldap.provider>
            <property name=idstore.config.provider value=oracle.security.jps.wls.internal.idstore.WlsLdapIdStoreConfigProvider/>
            <property name=CONNECTION_POOL_CLASS value=oracle.security.idm.providers.stdldap.JNDIPool/>
            <property name="username.attr" value="userPrincipalName"/>
            <property name="user.login.attr" value="userPrincipalName"/>
            <property name="virtualize" value="true" />
            <property name="ldap.url" value="directory.corp"/>
            <property name="idstore.type" value="ACTIVE_DIRECTORY"/>
      </serviceInstance>
<serviceInstanceRef ref="idstore.ldap"/>
But i am not able to see Identity store menu option in the left pane of Configure ADF Security window. Could you please help me to fix this issue. Thanks in advance
I am using jDev 11g
Please find the below link for Configure ADF Security window
http://4.bp.blogspot.com/_earSixbe3dw/SUbg7OWLCQI/AAAAAAAAB-4/Fos2I5eBxWM/s1600-h/adf_sec_6.png

http://mahmoudoracle.blogspot.ca/2012/02/adf-integration-with-ldap.html#.UcCxHPm1GSo
http://biemond.blogspot.ca/2008/12/using-weblogic-provider-as.html

ADF on mobile issues

Similar Messages

Maybe you are looking for