Adjusting count-in for recording???

Is it possible to adjust the count-in when recording (e.g. electric guitar)? If so, how???
Thanks.

cauchy wrote:
Is it possible to adjust the count-in when recording
no, the "count-in" is fixed length
what you can do is make your own click track, and make that as long or short as you'd like:
http://www.bulletsandbones.com/GB/GBFAQ.html#makeclicktrack
(Let the page FULLY load. The link to your answer is at the top of your screen)

Similar Messages

Count-in for recording audio in Premiere

Hello,
I want to provide a narration for some tutorial videos I am making. It may sound crazy, but I am currently doing all the video in Premiere Pro CC (because it is great), but I am adding the narration in the free iMovie app from Apple.
The reason for this is because iMovie has a great "count-in" before recording starts. This counts down three seconds once you start recording and allows for preperation to make the clip and most importantly, the mic is switched on, but the "pop" and other sounds are not recorded. The result is perfect, fluidity when recording narration sequences.
I don't want to do this on iMovie as it is a hassle loading in a second project in a different app. But for the life of me I can't figure out how to do this on Premiere. Is there a way to set up a count-in, or is does Premiere have something different but just as good?

Actually, your count-in will also come in handy for something else I am planning, so I appreciate it as well.
The count-in Mark showed works just as needed, so a big thanks for that Mark.
One last thing... I know I shouldn't keep referring to that iMovie software, but it does have another related neat feature which would be cool if I could replicate here. While recording my narration, if I don't like the section I just recorded, I can hop the timeline point to where the recording began with one key press, then through each section of recording (so it is like each block recorded has a beginning marker). It is a bit hard to explain.
Is there a way to do this via keyboard shortcuts or the mouse without manually creating markers everywhere? I know if I hold the shift and drag the timeline poiint, it will "attach" itself to the beginning of each recording, but I am hoping for something a little quicker and more fluid.

To count number of records in an internal table for a condition

Hello All,
I want to count number of records in an internal table for a condition.
For e.g. -- I have one internal table IT which having fields F1, F2, F3, F4, F5.
Now, I want number of records in itnternal table IT where F1 = 'ABC'.
Is it possible to do..?? If yes, then how.??
Thanks in advance...!!
Regards,
Poonam.

Hi,
If you mean an internal table, there are a few ways to do this.
1 One would be to loop over the table with a WHERE clause and increment a counter.
data: lv_counter type i.
clear lv_counter.
loop at itab where fld1 = 'ABC'.
lv_counter = lv_counter + 1.
endloop.
lv_counter now has the number of rows per the condiction.
2 Well, you may want to try this as well, and compare to the LOOP way. Not sure what kind of overhead you may get doing this way. Here ITAB is our main internal table, and ITAB_TMP is a copy of it. Again I think there may be some overhead in doing the copy. Next, delete out all records which are the reverse of your condition. Then whatever is left is the rows that you want to count. Then simply do a LINES operator on the internal table, passing the number of lines to LV_COUNT.
data: itab type table of ttab.
data: itab_tmp type table of ttab.
itab_tmp[] = itab[].
delete table itab_tmp where fld1 'ABC'.
lv_count = lines( itab_tmp ).
Thanks & Regards,
ShreeMohan

How to get count as 0 for records not in table

Hi All,
I have requirement where I need count of records in the table based on ids. Example query below
SELECT empid ,
nvl(COUNT(id), 0) empcount
FROM employee
WHERE empid IN(1, 2, 4, 5)
GROUP BY empid
In the table only record for "empid=2" is present so I get count 1 for it. But with it I should get count as 0 for non existing records. Expecting below output
empid | empcount
1 | 0
2 | 1
4 | 0
5 | 0
Appreciate your help and Thanks in advance.
Regards.
Ashish

e.g.
SQL> select column_value deptno, count (deptno)
from emp, table (sys.odcinumberlist (10, 20, 100))
where deptno(+) = column_value
group by column_value
    DEPTNO COUNT(DEPTNO)
        10             3
        20             5
       100             0
3 rows selected.

Showing Dimension counts for record results.

Hi experts,
In my application, I want to show dimension counts for record results. Support results contains 50 records, Out of 50 records, with Color=Red has 15 records. Therefore I want to display the Red Color results as -
Color:
Red (15)
Silver(5)
Like wise for other dimensions as well. As per the Endeca documentations, I guess "Drs" parameter is there to achieve it. If this is true then can you guys explain how the required functionality can be achieved using endea_jspref application . Or using presentation api, what kind of code should be written.
Any input/ideas will be highly appreciated.
Regards,
Hoque

Hi,
in my code level i used like below to display num of records
if you use RefinementMenu cartridge(in jsp RefinementMenu.jsp) you will get refinements in that content.
<c:forEach items="${content.refinements}" var="refinement">
<li>
<dsp:include page="/renderNavLink.jsp">
<dsp:param name="navAction" value="${refinement}"/>
<dsp:param name="text" value="${refinement.label} (${refinement.count}) "/>
</dsp:include>
</li>
</c:forEach>
in above ${refinement.label} :: means the lable name(color:red,silver) and
(${refinement.count}) :: means the no of records it has( red(10), silver(12))
in renderlink.jsp i used to render content or navigation based on your click(red or silver)
i think so it may help you from endeca Stuff.
Regards
Y.V.L

No Adjustment account found for cost element

Dear Gurus,
I am getting Three errors msg "No Adjustment account found for cost element" when i try to run the conformation of production order create ( T Code : C015 )" and I am not able to save the record . like
1 ).No adjustment account found for cost element
Message no. K5112
Diagnosis
Neither standard account determination nor the enhanced function found an adjustment account for the reconciliation posting.
System Response
No adjustment account could be determined for cost element in company code XXXX
Procedure
Maintain the standard or enhanced account determination. Information on maintenance can be found in the program documentation.
Execute
2) . No adjustment account found for cost element XXXXXXXX
Message no. K5112
Diagnosis
Neither standard account determination nor the enhanced function found an adjustment account for the reconciliation posting.
System Response
No adjustment account could be determined for cost element XXXXXXX in company code XXXX.
Procedure
Maintain the standard or enhanced account determination. Information on maintenance can be found in the program documentation.
Execute
3 ) No account is specified in item 0000000002
Message no. F5670
Diagnosis
No account was specified for account type "S" in item "0000000002" of the FI/CO document.
System Response
The Financial Accounting program cannot process the document.
Procedure
A system error has probably occurred in the application you called up. Check the data transferred to item "0000000002" of the FI/CO document.
Could anyone please help me with this.
Regards
SAP CO

Hi,
iam not able to understand of this SAP Notes: 531606 and 1027645
Could you pl give me full details for come out this problem.
Regards
SAP CO

How do I use optical input for recording in Garageband 9?

Hi,
I'm trying to use the Optical Line Input on my G5 for recording in Garageband, using a MOTU 828. I have the 828 optical output connected to the optical audio input on the G5, and I have Digital In (Optical digital-in port) selected in system preferences/sound. But in Garageband preferences, optical or digital input is not among my choices. If I select system setting or built-in audio 2, I get no signal. If I select MOTU 828, it defaults to the analog master outputs on the 828.
I am a Logic 8 user, and I'm able to select the optical input in Logic with no problem. I have my MOTU audio setup set so that the optical output is the default output, but Garageband still seems to use the analog output. I can tell by the record level, which is considerably louder for analog than for optical.
Any suggestions?
Thanks!

create a new fla, add btn and add the code i suggested. test.
var count:int;
var imageArray:Array=["1.jpg","2.jpg","3.jpg","4.jpg","5.jpg","6.jpg","7. jpg",
"8.jpg","9.jpg","10.jpg","11.jpg","12.jpg","13.jpg"];
var ldr0:Loader=new Loader();
ldr0.contentLoaderInfo.addEventListener(Event.COMPLETE,loadCompleteF);
var ldr1:Loader=new Loader();
ldr1.contentLoaderInfo.addEventListener(Event.COMPLETE,loadCompleteF);
btn.addEventListener(MouseEvent.CLICK,clickF);
function clickF(e:MouseEvent):void{
// initialize count
count=0;
// call loadF
loadF();
function loadF():void{
// add one of the loaders to the top of the displaylist and load the next image
addChild(this["ldr"+count%2])
this["ldr"+count%2].load(new URLRequest(imageArray[count]));
function loadCompleteF(e:Event):void{
// increment count
count++;
// check if the last has loaded
if(count<imageArray.length){
// if not clear the content out of the next loader.
if(this["ldr"+count%2].content){
this["ldr"+count%2].unloadAndStop();
// and call loadF so the next loader can load the next image in the array
loadF();
} else {
// if the last has loaded.
// last load completed

Counting number of records in a data block

hi folks,
Simple question for you guys: How can I count number of records in a data block.
In other words, say I have 10 detail records listed on a data block (one of my columns is a non-database item for entering a number). Now I just want to do somethin like:
Select count(*) From <data_block> into lnRecCount
Where <non-database column> <> 0 ;
Can I do this in a button trigger? I can't get it to work?
Thanks,
bob

You should make a routine that go through records of the block and count the records that agree with your condition.

Running Total Issue: How to calculate counts excluding suppressed records

Post Author: benny
CA Forum: Formula
Hello All:
I have a current report that gives the total counts of work requests. However, in my section expert, there are some records in the detail that are suppressed (if there isn't any backlog). The current running totals are counting all the records including the suppressed records. I think I need three formulas:1. Calculate the counts2. Calculate the counts excluding suppressed records3. Reseting the counts by group
May I ask if someone can give me an example of what I should do?
Thanks so much!
Benny

Post Author: benny
CA Forum: Formula
Bettername,
Actually, I should have been more specific. This report is actually a PM backlog report. It displays all the work requests (PM) issued including the backlogged. There are 9 columns (including one called Backlog) for the different counts of the pm's based from the status codes (Issued, Material on Order, Completed, Cancelled, etc) of the work requests. The detail records of worke requests are grouped by shop and PM end date. The running totals are calculated at the pm date group level (group footer#2). Then based from those at the shop group level (group footer#1) there is a grand total of counts of the running totals. The detail records and pm end date group header (group header #2) are suppressed.
Now the foremen would like the report to just display all the backlogged PMs. Using the section expert, I suppressed all the PM issued that have no back log ({@ backlog = 0}) and just display the back logged pm's. This is where I run into the running total issue.
This is very involved report and I will use the column PM Issued as an example. I can still use the same logic as you suggested?
1. declaration formula:
whileprintingrecords;numbervar pmissued := 0;
2. Suppression formula that uses the variable:
whileprintingrecords;
numbervar pmissued;
if ({@ backlog = 0}) then pmissued:= pmissed else pmissued:=pmissuedr+1
3. Display formula:whileprintingrecords;
numbervar pmissued;
If this is the right track, then I can use the same example for the other columns.
Thanks so much.
Benny

Query in SQL to display count of all records but where condition is present

Hi All,
I have situation where I need to display count of all records all particular period but in where condition type condition has to be present :
Please find the below sample data :
PERIOD_ID     TYPE     MV_COUNT     IS_FLAG
20110401     AM     1     0
20110401     AM     1     0
20110401     MS     29     0
20110501     MS     1     0
20110601     MS     14     0
20110701     MS     2     0
20110401     MS     1     0
20110401     AM     2     0
20110401     AM     69     0
20110401     AM     2     0
finally I need for type = MS
i) total is_flag count for all the periods
ii) for period=20110501 what is the mv_count
I need to use the table single time (ie not self join outer joins )
I have tried to use partition by clause but it will filter out the data .
Cheers,
Sp

842106 wrote:
finally I need for type = MS
i) total is_flag count for all the periods
ii) for period=20110501 what is the mv_count
I need to use the table single time (ie not self join outer joins )
I have tried to use partition by clause but it will filter out the data .
select sum(is_flag) is_flg_count,
         sum
             case when period = 20110501 then mv_count else 0 end
            ) mv_cnt_for_20110501
from your_table
where type = 'MS';

Reg: how to count no.of records in flat file

Hi,
Very god morning to all, i faced a one problem like this, i am new to jython code.my problem is i want count the no.of records flat file before loading to the table, is there any easiest way to count the number records in file rather than jython ?
please share immediately.
Regards,
sh

Hi actdi,
Thanks for giving reply, i am working in windows environment, and my previous project developers use the coding like
below:
filesrc = open('#filename','r')
first=filesrc.readline()
lines = 0
while first:
lines+=1
first=filesrc.readline()
s1=str(lines)
s2= ' in the file ------'
s3='#filename'
final = s1 + s2 + s3
raise ' \n\n The Number of Lines in the File are ---' , final
see this code they are wrote in a procedure but i have a doubt with this , where it finally stores the row count.
Kindly share if u have any solutions reg this in windows env.
Regards,
sh.

Counting fact table records within brackets

Hi,
I have a star schema setup in OBIEE, consisting of a fact table of transaction records, linked to a customer dimension and a time dimension via PK-FK relations.
One of the requirements is to count the number of customers based on how many transactions they have done per time period. I imagine solving this by creating logical colums such as "# customers (1-10 transactions)", "# customers (11-20 transactions)", etc. The counting should be based on the current level of drill-down in the time dimension.
Any advice on how to approach this would be greatly appreciated
best regards
M

Thanks for you reply, it brought me a lot closer to a solution. So far i've been able to create a bracket attribute on the customer dimension (via Answers and then into Administrator, as advised). I've verified this against the database, and it categorizes each customer correctly.
The remaining challenge is that I want to see the count within each category on an aggregate bracket level rather than per customer. Using one attribute ("customer bracket") which can take on one of several values (e.g. "0", "1-10", "11-20", etc.) i'm not sure how to accomplish this.
As a workaround i tried creating one column in Answers for each bracket, taking on the value 1 for records falling within that bin, and 0 for all other records. Treating the column as numeric, and adding a sub total (sum), i get the answers i want for each bin. The problem here however, is that one line (value 0 or 1) is shown for each customer record, which makes the report useless for most practical intents and purposes as thousands of records are shown.
Any thoughts on which method i should go ahead with, and how?
regards
M

Cell Counting Script for the Biomedical Sciences

I want to talk to you about something I envision will be of great use in the biological/medical community. This involves the creation of an Adobe PS script that will count cells manually with the click of a button. First let me tell you a bit about my research. As a medical student, I’m interested in ophthalmology and I hope to make it a career out of fighting preventable forms of blindness like glaucoma, macular degeneration and diabetic retinopathy. Here’s some background of my work in Glaucoma:
Glaucoma is currently the second most common cause of irreversible blindness in the world. This usually presents as increased Intraocular Pressures (IOP) that damage a certain subpopulation of cells within the retina called Retinal Ganglion Cells (RGC).
We have mice that work as great models for glaucoma. These mice are imaged before the onset of glaucoma and treated with pharmacological agents throughout their glaucomatous state that we hope will 1.) reduce IOP and 2.) spare the RGCs.
I’m attaching an example of the images I am taking from mice and also a sketch of what I envision the Cell Counting Interface to look like. This is something that other researchers would definitely use specially if they are doing multi channel work with fluorescent antibodies.
Ideas for a cell counting script:
1.     The script should ask for a file or multiple files to open.
2.     Once image file is open, the script will ask to highlight a working area. Multiple areas can be created within one image file but only one area can be active. There should be a button that creates a new area that is easy to expand its width and length and is also easy to rotate and move similar to the Free Transform function on PS CS3.
3.     Cells will either be Red, Green, Blue or Yellow (overlap between red+green signals). When a specific area is toggled active and the researcher has the Red Channel toggled in preparation to count all the Red cells within the toggled active area, each Left click of the mouse will put a small solid red circle (adjustable to account for larger or smaller cell sizes) over the clicked cell on the image. This cell will be counted under the Red Channel for that particular “Active” area. There will automatically be a “Total Area toggle that, when active, will sum all the areas and will take a tally of the total number of Red, Green, Blue and Yellow cells that have been manually counted. As an example, say the researcher wants to work in an area of the image file whose cells have not yet been counted. The user clicks the button, “Create Area” and an “Area N” line is created below the button. The “Area N” line has a corresponding toggle switch that is clickable in order to activate. Simultaneously to creating the line below the button, the user will hold the Left click on the mouse, drag it to create Area N, and release when the desired size is attained. The user can then rotate and make final adjustments to make sure it is in the desired spot in the image file.
4.     When the area is active, a thicker bright outline distinguishable from the rest of the areas will be seen. Clicks will only be allowed within an active area. If the “Total Area” toggle is selected, all areas become active, yet the script will be robust enough to keep track of which cells came from what area and add these to the Total Area numbers
5.     If a Channel is deselected all dots of that color (Red, Green or Blue) will be invisible until the channel is selected again.
6.     Two or more scripts can run at the same same time.
7.     A print out will print the raw image plus the image with the dots, the filename, the individual area statistics (cell counts per channel) and the total Area and total cells counted (Total Red, Total Green, Total Blue, Total Yellow)
8.     The user has to manually interact and click on spots he/she thinks are cells. (Automated programs are not as good at picking out cells from artifacts left
9.     Oh, Right clicking on a dot should remove the dot and subtract it from the cell counts.
Conversion for Area calculation:
x pixels = y microns
Area in microns squared = ((H pixels X y microns)/ x pixels) X ((W pixels X y microns)/ x pixels)

Some of what you want is possible. Take a look at the Count Tool in CS3/4. It may only be available in the Extended versions. That provides a
reasonable interface for marking items in a image like you are wanting to do with cells. Take a look at that and see what kind of manual process
you can get worked out.
However, to get the workflow you want (or anything close to it) would require more than a little code.

Player Error: "You cannot record without enabling at least one track for recording"

So I'm trying to adjust my audio using the track mixer in premiere pro cc. I assigned 2 clips to a submix. When I tried to record, I got the following error: "You cannot record without enabling at least one track for recording." I disabled other tracks, then re enabled them all, muted them all, but still got the same error when I tried to record.

This is how I have just made a recording:
Select track to record (1), Select record (2) then press play to record.
Use the in-out markers in the program monitor to select the area to record.

How to get a count of unique records

How do you get a count of unique records? Looking only for one number, not a list..so if the data is:
ID
===
1234
1234
1234
1236
1236
1237
Then, the count total will be one field called 'ID' with the value '3' in it..
All I know how to do is get a count that will count all records, or do it in two queries. Looking to do this in one query statment..
Thanks..

Just a small clarification...
Concatenation could potentially give wrong result, depending on the data.
For example...
sudhakar@ORCL>ed
Wrote file afiedt.buf
1 with t1 as
2 (select 'AA' c1, '101' c2 from dual union
3 select 'AA1' c1, '01' c2 from dual union
4 select 'AA101' c1, null c2 from dual union
5 select 'BB2' c1, '345' c2 from dual union
6 select 'AA101' c1, null c2 from dual union
7 select 'BB2' c1, '345' c2 from dual union
8 select 'BB234' c1, '5' c2 from dual
9 )
10* select count(distinct c1 || c2) from t1
sudhakar@ORCL>/
2IMHO, the required answer will be...
sudhakar@ORCL>ed
Wrote file afiedt.buf
1 with t1 as
2 (select 'AA' c1, '101' c2 from dual union
3 select 'AA1' c1, '01' c2 from dual union
4 select 'AA101' c1, null c2 from dual union
5 select 'BB2' c1, '345' c2 from dual union
6 select 'AA101' c1, null c2 from dual union
7 select 'BB2' c1, '345' c2 from dual union
8 select 'BB234' c1, '5' c2 from dual
9 )
10* select count(distinct c1 ||'.'|| c2) from t1
sudhakar@ORCL>/
5
sudhakar@ORCL>vr,
Sudhakar B.

Adjusting count-in for recording???

Similar Messages

Maybe you are looking for