Adjusting the SID table for master data infoobject

Hai
Im trying to activate one master data infoobject. But it says the error like below
The SID Table /BI0/SBBP_DELREF must be converted incompatibly with an activation of characteristic 0BBP_DELREF (changes to the key in the table). Table /BI0/SBBP_DELREF contains data. Parts of this data were lost in the conversion.
or
Undo the changes that led to the incompatible conversion (the changes in the key) or delete all data from table /BI0/SBBP_DELREF.
So how can i adjust the SID table for this .
pls tell me
kumar

Hi,
you'll have to delete ALL the master data for this IObj. Therfore you'll have to
delete all data in ALL the IObjs using 0BBP_DELREF (ODS, CUbes and characteristics).
Then activate your IObj. You will go through some step which I explained in the
following thread
Re: Urgent...Company Code lenght has been changed
Extract:
1. Delete 0COMP_CODE master data.
- get objects list using 0COMP_CODE with loaded data: I suggest to delete
master data via AWB (right click the characteristic). If it can't be deleted because
it is used display the deletion log (via AWB or tx SLG1 / RSDMD, MD_DEL).
- delete loaded data for the list above.
This should not be too much since you are in DEV.
2. change 0COMP_CODE length
- change the length to 4;
*- Activate your IObj. You'll get a popup log, validate. Activate despite warning and
errors. You will get An error message, validate.
You should get an horizontal pane with the activation log. Read it for your personal culture but if you don't have time then don't...
- Next the system will prompt to convert the tables: answer YES. The system will ask to schedule the table conv. in the background, go4it.
- next is the SE14 screen for the P table: Hit Activate and adjust (Direct
execution, or in the back as you wish). Answer yes to the mass processing
question and yes (again) for request adjust online. Your table should be converted successfully.
- go back twice from this screen (leaving SE14 tx and return to RSD1). reread the update log if you wish.
- repeat from the *- above... it will perform the very same for all other P tables of IObj using 0COMP_CODE and the 0COMP_CODE S table.
Your IObj is reactivated again. So should your ODS/DSO objects (check activate for example). Cube didn't need to convert tables since the MDID is note posted in any table of a cube.
Please note that once your IObj is in revised version you can perform the same via the menu extras / database table / convert all (see my previous post).
Now you have to evaluate the task. Of course that is a work to fix the mistake.
Depending on when it has be changed it may be worth to restore your DEV sys with a backup (loose work performed from the backup until now).
hope this helps... otherwise, revert.
Olivier.

Similar Messages

TO FIND TABLES FOR MASTER DATA TRANSACTIONS

HI , When we create a customer, the information is updated in structure RF02D and some tables like KNA1 are updated ..
How can we find the tables for master data transactions.?
please reply...
thanks.

Hi,
I entered into the TC : ST05, Activated the trace then I created a customer, then I came back and deactivated trace, then I clicked on display it gave me a list ( yellow color list ) ... Wat do u mean by update methods here ...
Thanks
SK SIDDIQUI

Simple basic question on attribute data load for Master Data InfoObject....

Hi
I am a bit confused & wanted to have some clarification on the following:
1) For loading Attributes data to Master Data InfoObject, we load it through Data Source of Type Master Data Attribute.
But what i did, i created Data Source of type Transaction data and using the same Excel file, i was able to create transformation with Matser data Attribute and was able to load the data.
This shows i can use Data source of type either master data attribute OR Transaction Data doen't matter while loading into master data attribute. IS THIS TRUE?
2) I have 2 master data infoobjects (Test1 & Test2). I made Test2 as an attribute in Test1.
My question is while loading Master data for Test1, will it also load the data into Test2 if it doen't find respective data in Test2?
(i did all the transformation as per need.)
Waiting for your reply....
Thanks...

HI Harpal,
1. Did you make a transformation between attribute data source from source system other than flat file and DSO?...
I think PC File is flexible in this aspect..
2.While loading Test1 the infoobject Test2 will get loaded only if it is a navigational ttribute..(You can see this by refering the SID Table)
Please also note that it does not load Test2 attributes.
regards,
Rakesh.

Unable to generate "Export data source" for Master data infoobject

Hi Gurus,
I'm in BW 3.5
I need to generate "Export data source" for a master data info object.
I followed below steps:
I ticked the checkbox "Characterist. is export data source" in the master data Info object maintenance screen.
In the Infosource area, for the desired Infoobject --> Right click --> Generate export datasource --> a dialog box displays saying "The generation of DataSource was successful"
Problem:
Even after refreshing, etc.. I couldn't find the generated datasource 8**** for the above master data. I also tried to replicate the datasource from the myself source system, but couldn't find it even there. I don't know where the generated export data source is hiding ???
Could anyone please help ????
Thanks,
Venkat

Hi Venkat,
I guess that after creating an export datasource for infoobject this DS should appear in the RSA1-Source systems - MYSELF - datasource overview (with name starting with 8). Since it's a datamart, it should appear also as system generated infosource. And in this case you would be able to assign in URs of data target the appropriate infosource (make sure that in Infoproviders tab of RSA1 you have inserted your infoobject as a data target).
However, there are some bugs related to export data source. CHeck if you see you export data source in RSA6.
If you don't see it - consider applying OSS Note #816892 - "30BSP26: Export DS for master data is not generated".
Note #876845 - "30BSP29: InfoObject change: Export DataSource not adjusted" is also may be useful.
-Vikram

Extractors/ Setup Tables for Master Data

Hi Experts,
I am not sure if the extractor enhancement methods, setup table initialisation for Master Data different from transaction data.
I am trying to do a delta init with initialisation of Setup table (OLI7BW) for 0CUSTOMER_ATTR. And I am not able to see any records in RSA7. Althought RSA3 shows 10 data packets and 1000 records.
What does that mean.
What I want to achieve is all the records a fresh for a few master data datasources since they were refreshed last month. Since then they were not being used.
Kindly help me as soon as possible.
Thanks in advance.

Hi Priya,
I am not sure if the extractor enhancement methods, setup table initialisation for Master Data different from transaction data. -
For your information there is no conecpt of intialisation for master data.
I am trying to do a delta init with initialisation of Setup table (OLI7BW) for 0CUSTOMER_ATTR. And I am not able to see any records in RSA7. Althought RSA3 shows 10 data packets and 1000 records.
What does that mean.
As said there will be no setup tbale concepts for masterdata, the changes for masterdata follows the delta pointer concept(i.e whenever changes to standard masterdata table happens the message class trigger the delta pointer for those changed records and post in RSA7).So always u see in RSA7 the changed records for masterdata tables
What I want to achieve is all the records a fresh for a few master data datasources since they were refreshed last month. Since then they were not being used.
i didn't get abt this question can u eloborate
let me know if i answered ur queries

Types of tables for master data

Hi, can any one explain the types of tables whcih r activated for the master data at the modelling phase ,n what ar they

1.View Of Master data table: /BIC/M<name of characteristic> - automatically generated using P or Q or P and Q.
2./BIC/P<technical name of the characteristic> (for customer-defined characteristics that have attributes that are not time-dependent)
/BI0/P<technical name of the characteristic> (for standard SAP characteristics
that have attributes that are not time-dependent)
3./BIC/Q<technical name of the characteristic> (for customer-defined characteristics that have time-dependent attributes)
/BI0/Q<technical name of the characteristic> (for standard SAP characteristics that have time-dependent attributes)
4.hierarchy table (H table) ->If it has Hierarchy.
5.Sid Table:The S table is generated when a characteristic is activated
6. X table is only generated if at least one time-independent attribute is defined as
a navigation attribute
7. Y table is only generated if at least one time-dependent attribute is defined as
a navigation attribute.
8.Text table
Hope it Helps

How can we find tables for master data transactions

hi
could anybody tel.............
when we create a customer the information is updated in structure RF02D
some tables like kna1 are updated.
how can we find these tables..?

Hi Kalyan,
This is how you can find any transparent table you want.
1. Put your cursor in any of the fields of the customer screen and hit F1 on your keyboard. Next Click on the "Technical Information" icon. Under "Field Data", this would show you for example structure RF02D and field KUNNR (Customer Number), if your cursor was in the Customer Number field. Copy the field KUNNR.
2. Next, open another session and execute transaction code SE80. On the Menu Bar, click "Environment -> Repository Information System". Open up the folder "ABAP Dictionary -> Fields -> Double Click on Table Fields". Paste your Customer Number field name (KUNNR) in the "Field Name" and Execute. This would show you all the transparent tables where the Customer number is stored.
I hope the above helps.
Do not forget to award the points please.
Regards,
Jacob

Need the name of the funcion module for master data planning

Hi all,
i need to know the name of the function module to call in a planning function in order to do a master data planning.
thanks a lot!

Hello Giancarlo,
You cannot do master data planning in BPS. Master data has to be maintained separately in the BW system.
Cheers
Aneesh

Performing calculation on text data fields - for Master Data infoobjects

Gurus,
I've a MD InfoObject Z_Obj containing set of attributes - Z_Attr1, Z_Attr2 and Z_Attr3 , the data for this fields contains text ( of single character)
The requirement goes like this
Attribute Value Value to be displyed in the Report
Z_Attr1 - Y A
Z_Attr1 - N <Blank>
Z_Attr2 - Y B
Z_Attr3 - N <Blank>
Z_Attr4 - Y C
Z_Attr5 - N <Blank>
Without making use of any ABAP routine , What are the possible ways we can achieve this in Output.
Remember I want the validation of the fields at report level not at the ODS/DSO/MD InfoObject level.
Please do help me about the various possibilites.
Thanks in advance <removed by moderator>
Regards,
Yaseen
Edited by: Siegfried Szameitat on Nov 7, 2008 9:15 AM

This can be done :
Create 3 formula variables of type replacement path.
While creating :
In the general tab, choose reference characteristic as Z_Obj.
In Replacement Path tab,
Replace variable with : Infoobject
Replace with : Attribute value
In below drop down choose your attribute appropriately.
Now you can use this formula variables to create formula or CKF.
Hope this helps.

Datasource for master data attributes : QUAN fields ?

Hi,
In the datasources for master data attributes (in R3), fields type QUAN are in the extraction structure but not in the datasource (for example field LFMNG is in extraction structure BIW_MVKE_S but is not in the datasource 0MAT_SALES_ATTR).
Is there a standard way to have these fields type QUAN in master data attributes ?
Otherwise I think to this solution :
=> add a field ZZLFMNG type DEC (DEC fields are in the datasource for master data attributes) in a structure append of BIW_MVKE_S
=> in the user-exit for master data attributes : move the value of LFMNG to ZZLFMNG
=> in the infosource in BW : assign an infoobject type QUAN to the field ZZLFMNG
What do you think of it ?
Thanks in advance.

Hello,
I'm adding this field LFMNG too, but after I update the roosfield table an error occurs in RSA6.
This error said that the MEINS field is hide in the DataSource. But we there isn't this field there. Someone knows what should I do?
Thanks!
Eduardo

Requirements for master data template

HI,
Please let me know the basic requirements for master data template. What all the infotype to be involved in collecting master data template.
Thanks and regards,
Aylwin

Hi Alwyn,
If you dealing with india payroll definately Yes subject to you business process again.
Even though it is indian payroll some item may not applicable
For exmple other income resourece will be if you go to manufaturing industries you may face problem even though they got some they don't want reveal it to the employee.
in such that infotype is not required as per your business process.
Some states like UP there is no profession tax. Genrally we say profession tax need to be configure you need that master data.
If such case that might be wrong for that you need to give all the info
use PA30 t code go in side check what are the mandatory fields and take them as master data fields and put it in template.
If your client is able to give other field you can very well add them no harm in it.
But make sure you filled mandatory fields
That is the reason i was asking you to tell which coutry payroll you using
Best Regards

DTP for Master data

Hi Guys,
How to extract master data and hierarchies from ECC into BI infoobjects?
Do we follow the same procedure for loading master/hierarchy data as for transaction data - i.e. Load into PSA and then create Transformations and DTPs to load into infoobjects? If so, what is the best approach as far as Full/Delta loads.
1. Is it ok to do a full load into PSA (using infopackage) and then do a full load always (The process chains for master data would be running nightly).
or
2. Should we have 2 infopackages (full and delta) into PSA and then multiple DTPs. (The process chains for master data would be running nightly).
Regards.

Indicator: Only Get Delta Once
Source requests of a DTP for which this indicator is set are only transferred once, even if the DTP request is deleted in the target.
Use
If this indicator is set for a delta DTP, a snapshot scenario is built.
A scenario of this type may be required if you always want an InfoProvider to contain the most up-to-date dataset for a query but the DataSource on which it is based cannot deliver a delta (new, changed or deleted data records) for technical reasons. For this type of DataSource, the current dataset for the required selection can only be transferred using a 'full update'.
In this case, a DataStore object cannot usually be used to determine the missing delta information (overwrite and creation of delta). If this is not logically possible because, for example, data is deleted in the source without delivering reverse records, you can set this indicator and perform a snapshot scenario. Only the most up-to-date request for the DataSource is retained in the InfoProvider. Earlier requests for the DataSource are deleted from the (target) InfoProvider before a new one is requested (this is done by a process in a process chain, for example). They are not transferred again during the DTP delta process. When the system determines the delta when a new DTP is generated, these earlier (source) requests are seen as 'already fetched'.
Setting this indicator ensures that the content of the InfoProvider is an exact representation of the source data.
Dependencies
Requests that need to be fetched appear with this indicator in the where-used list of the PSA request, even is they have been deleted. Instead of a traffic light you have a delete indicator.
Get Data by Request
This indicator belongs to a DTP that gets data from a DataSource or InfoPackage in delta mode.
Use
If you set this indicator, a DTP request only gets data from an individual request in the source.
This is necessary, for example, if the dataset in the source is too large to be transferred to the target in a single request.
Dependencies
If you set this indicator, note that there is a risk of a backlog: If the source receives new requests faster than the DTP can fetch them, the amount of source requests to be transferred will increase steadily.

Tables for Budget data

Hi,
Please provide the base tables for Budget data
thanks

hi Arun,
check these
BPGE (overall budgets),
BPJA (annual budgets) and
BPPE (period budgets).

Why we are not using "Message Control" for Master data ?

Hi friends,
We are using Message control as output determination for Transactional data, what is the main reason for not using the msg control for Master data.Please explain with details...
I am very thankful to them...
Thanks and Regards.
Naveen Kumar. Chamala

Hi Naveen,
 Listing down those I know -
 1. Master data is expected to be changed/created less frequestly.
 2. Transactional data is expected to be chnaged/created more frequestly.
 3. Transactions to create/change/display master data do no have message control integration, since you are not supposed to print/fax/mail master data to your partners.
 4. Distribution of master data in generally supposed to happen within Enterprise boundry and typically you will have one central server maintaining master data which will be distributed to multiple downstream operation system (Some thing where MDM fits). So ideally when distributing master data using ALE you will be sending it to multiple systems.
 5. Distributing transactional data PO/SO etc is same as sending fax/print which fits with the requirement of message control.
Hope this helps,
Regards,
Sanjeev

BI Content for Master Data

I am evaluating the BI Content for Master Data from R/3 system such as business partner, material, etc. However, I can't find the group of standard BI content used for loading these Master data. May you suggest me any links that I can find information about these BI Content for loading master data?
I'm sincerely sorry, but I'm really new to BI.

hi,
refer this link.
Question about Extraction of master data from R/3 into BI 3.5
you can search for some more in SDN.
hope it helps,
regards,
Parth.

Adjusting the SID table for master data infoobject

Similar Messages

Maybe you are looking for