Admin and Managed Server on same machine
Is it possible to run cluster admin server and one of the managed servers on the
same machine...(just preserving machine resources for in-house testing).
If the admin listens on 7001/7002 can I just set up the managed server to 7003/7004
or will I also run into problems with the multicast address?
John Hufnagle wrote:
> Is it possible to run cluster admin server and one of the managed servers on the
> same machine...(just preserving machine resources for in-house testing).
As Kumar said, it is possible to run the admin server and one (or more) managed servers
on the same machine.
>
>
> If the admin listens on 7001/7002 can I just set up the managed server to 7003/7004
> or will I also run into problems with the multicast address?
Since the admin server is not part of the cluster, it is perfectly fine to use a
different set of ports for the managed servers as long as all servers in the same
cluster use the same ports...
Hope this helps,
Robert
Similar Messages
-
Starting Admin and Managed Server on Same Machine
Has anyone come across a method of running both their admin server and managed
servers as a Service and on the same machine. As you can see, when the OS comes
up both Services for the servers will be started. I can put in a dependency on
the managed server saying that the admin server needs to be started but that doesn't
guarantee that admin server will be ready for "prime time."
I have seen somewhere in a support message something about a "depend" and "delay"
flag for the beasvc.exe program but the one I'm using doesn't seem to support
this.
Here is my setup:
Windows 2000 Pro
Weblogic Server 6.1 SP1
Any assistance is appreciated,
RichJohn Hufnagle wrote:
> Is it possible to run cluster admin server and one of the managed servers on the
> same machine...(just preserving machine resources for in-house testing).
As Kumar said, it is possible to run the admin server and one (or more) managed servers
on the same machine.
>
>
> If the admin listens on 7001/7002 can I just set up the managed server to 7003/7004
> or will I also run into problems with the multicast address?
Since the admin server is not part of the cluster, it is perfectly fine to use a
different set of ports for the managed servers as long as all servers in the same
cluster use the same ports...
Hope this helps,
Robert
-
Infrastructure and forms server into same machine
Dear friends,
I am faching strange problem
, I install 9ias(9.0.2.0.1) infrastucture and form server into same machine,
after sucessfull installation it is mention infrastucture will run the port 7777 and form will 7778,
but after just installation it work into these ports but when i restats the system then port of infrastucture change and it is 7779.
now if i run forms the it give internal error 500,
then I stop fist infrastucture http server then http server of form
and again first start infrastucture hhtp server then form http server
now agin infrastructure server port id 7779(insted of 7777)
but now my form work properly.
every day i do this job , but some time this method fails then i have to again install server and have to repeate above mention job .
pls help me
With regards
Siddharth Singh
[email protected]Mid-tier listens on a lot of ports. On a std install (with both Infra and Mid-tier) Web-cache listens on port 7778 "in front of" httpd for OHS on 7779. So perhaps you forget to start web-cache? (run from BI home: webcachectl)
Perhaps the problem with Forms is related to X Toolkit? -
Is it possible to install Oracle 9i and SQL server on same machine
1. Is it possible to install Oracle 9i and SQL server on same machine ?
2. If yes, what are the problems i may encounter during installation
3. What should be hardware configuration for installing both databases in same machine like hard disk space, RAM speed etc,Hi,
1. Yes you can do it.
2. There shouldn't be any problems
3. Depends on your needs
Jarek -
I want to run IIS and Form Server on same machine
Dear follows
I have problems , porblems is that i want to run IIS and Form
Server at same machine but i m facing some problems so please
inform me right proceduers to run this services at same machnine
now i m using Windows NT .
My secone problems is that i want to send emai via oracle
reports , actuall condition is that i have oracle report and i
want to add button and behind this boutton i want to add trigger
to send this report as a emai to client as txt/html format.There shouldn't be any problem running both forms server and IIS
on the same machine. Just make sure the ports that are used are
different. IIS's default port is 80, so either change this port
number or change it for the Forms server's web listener.
You can send reports to email if you use DESTYPE=MAIL. -
How to instal FMS and Wowza Server on same machine.
I want to to instal FMS and Wowza Server on same machine any one know about this please guide me about this.
Thanx in advance.I have on one server installed both red5,fms and wowza
first install red5 ( by default it uses port 1935 obviously )
then let say wowza , with installation choose port 1936 ( make sure you open this port )- you app will run on rtmp://your-ip/domain.com:1936
then fms - choose port 1937 ( here again make sure you open this port too ) - rtmp://your-ip/domain.com:1937 -
WebService URL in Admin and Managed Server????
All,
WLS configuration:
Admin Server:7001
Managed Server:7003
Both Admin and Managed Servers reside in the same machine.
Which is the correct URL for accessing the webservice?
http://localhost:7001/test/testWebService?WSDL
OR
http://localhost:7003/test/testWebService?WSDL
WLS configuration:
Admin Server:7001
Managed Server:7003
Managed Server:7004
Both Admin and the 2 Managed Servers reside in the same machine.
Two managed Servers form the cluster.
What will be the correct URL to access the webservice
http://loclahost:XXXX/test/testWebService?WSDL
what is XXXX???
Thanks
JayServices will be deployed in managed servers only.
Then in the first case it will be
http://localhost:7003/test/testWebService?WSDL
In the second case, wherein 2 Managed servers are there.
What will be the accesing webservice URL?? when the services are deployed in both.
Will the admin server redirect the requests to the managed servers??
How do I access???
Thanks
Jay -
Weblogic deployment ( admin and managed server)
I have one AdminServer and One ManageServer running on the same IP Address with
different ports,
AdminServer and ManagedServer is coming up without any errors, I able to access
the index.jsp using the following URLs
http://hostname:7001/index.jsp (Admin Server)
http://hostname:8001/index.jsp (Managed Server)
my index.jsp I have several other hperlinks ( say contacts, help etc)
Once my servers ( admin and managed ) are started successfully, I'm able to browse
thru my application using the first URL.
but if I accessed the application using the second URL the index.jsp is coming
from port no (8001), which I observed thru the access.log and if I click any other
links(contacts, help) in the index.jsp, it is access the jsps from (7001) instead
of 8001.
I think in my Jsp I'm using a wrong mechanism to read the URL, what is the proper
way to read the correct URL?
Please help me to sort out this issueTested and got it worked.
-
WLS Admin and managed server startup issue
Hi ,
In one of WLS Domain both the Admin Server and Managed Server startup is just hanging at the below mentioned point :
<Security> <BEA-090082> <Security initializing using security realm myrealm.>
After this there are no error messages or logs being generated and the server start up is not proceeding .
Only message shown a while after this is :
Warning : domain runtime mbean server has not been found after trying for 600 seconds
Please provide some inputs on how to troubleshoot this issue .
Checked the AdminServer.log and there are no errors reported there as well .
Some more data from AdminServer.log :
<[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1336448845368> <BEA-090516> <The Authenticator provider has preexisting LDAP data.>
<[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1336448845632> <BEA-090516> <The Authorizer provider has preexisting LDAP data.>
<[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1336448846193> <BEA-090516> <The CredentialMapper provider has preexisting LDAP data.>
<[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1336448846208> <BEA-090516> <The RoleMapper provider has preexisting LDAP data.>
<[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1336448846433> <BEA-090093> <No pre-WLS 8.1 Keystore providers are configured for server AdminServer for security realm myrealm.>
<[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1336448846433> <BEA-090082> <Security initializing using security realm myrealm.>
Thanks
Srinath
Edited by: Srinath Menon on May 8, 2012 9:36 AMHi Ashish ,
Thanks for the inputs.
Tried the same steps as mentioned but the issue still remains like that .
Posting the thread dump collected for AdminServer:
===== FULL THREAD DUMP ===============
Tue May 8 10:04:58 2012
Oracle JRockit(R) R28.1.3-11-141760-1.6.0_24-20110301-1430-linux-ia32
"Main Thread" id=1 idx=0x4 tid=9341 prio=5 alive, waiting, native_blocked
-- Waiting for notification on: weblogic/t3/srvr/SubsystemRequest@0x9f81d3c0[fat lock]
at <unknown>(???.c)@0xb7fe9410
at eventTimedWaitNoTransitionImpl+79(event.c:90)@0xb7d6bae0
at syncWaitForSignalNoTransition+81(synchronization.c:28)@0xb7ee7c62
at syncWaitForSignal+157(synchronization.c:85)@0xb7ee7dbe
at syncWaitForJavaSignal+53(synchronization.c:93)@0xb7ee7ea6
at RJNI_jrockit_vm_Threads_waitForNotifySignal+53(rnithreads.c:72)@0xb7eb78a6
at jrockit/vm/Threads.waitForNotifySignal(JLjava/lang/Object;)Z(Native Method)
at java/lang/Object.wait(J)V(Native Method)
at weblogic/t3/srvr/SubsystemRequest.rendezvouz(SubsystemRequest.java:100)
^-- Lock released while waiting: weblogic/t3/srvr/SubsystemRequest@0x9f81d3c0[fat lock]
at weblogic/t3/srvr/SubsystemRequest.action(SubsystemRequest.java:81)
at weblogic/t3/srvr/SubsystemRequest.start(SubsystemRequest.java:51)
at weblogic/t3/srvr/ServerServicesManager.startService(ServerServicesManager.java:459)
at weblogic/t3/srvr/ServerServicesManager.startInStandbyState(ServerServicesManager.java:166)
^-- Holding lock: java/lang/Class@0x9fa95598[biased lock]
at weblogic/t3/srvr/T3Srvr.initializeStandby(T3Srvr.java:879)
at weblogic/t3/srvr/T3Srvr.startup(T3Srvr.java:566)
at weblogic/t3/srvr/T3Srvr.run(T3Srvr.java:467)
at weblogic/Server.main(Server.java:71)
at jrockit/vm/RNI.c2java(IIIII)V(Native Method)
-- end of trace
"(Signal Handler)" id=2 idx=0x8 tid=9342 prio=5 alive, native_blocked, daemon
at <unknown>(???.c)@0xb7fe9410
at sigiSignalHandlerThread+135(signalhandler.c:131)@0xb7ec2fd8
at thread_stub+146(lifecycle.c:808)@0xb7e2c333
at start_thread+225(:0)@0x515832
at __clone+93(:0)@0x46ae0e
"(OC Main Thread)" id=3 idx=0xc tid=9343 prio=5 alive, native_waiting, daemon
at <unknown>(???.c)@0xb7fe9410
at eventTimedWaitNoTransitionImpl+79(event.c:90)@0xb7d6bae0
at syncWaitForSignalNoTransition+81(synchronization.c:28)@0xb7ee7c62
at innerNativeDoWait+894(nativelock.c:614)@0xb7e78caf
at nativeWait+71(nativelock.c:721)@0xb7e79008
at ocMainThread+663(gcthreads.c:581)@0xb7d8a098
at thread_stub+146(lifecycle.c:808)@0xb7e2c333
at start_thread+225(:0)@0x515832
at __clone+93(:0)@0x46ae0e
"(GC Worker Thread 1)" id=? idx=0x10 tid=9344 prio=5 alive, daemon
at <unknown>(???.c)@0xb7fe9410
at eventTimedWaitNoTransitionImpl+79(event.c:90)@0xb7d6bae0
at eventTimedWaitNoTransition+62(event.c:72)@0xb7d6bb3f
at eventWaitNoTransition+32(event.c:62)@0xb7d6bc31
at mmGCWorkerThread+134(gcthreads.c:797)@0xb7d89d67
at thread_stub+146(lifecycle.c:808)@0xb7e2c333
at start_thread+225(:0)@0x515832
at __clone+93(:0)@0x46ae0e
"(GC Worker Thread 2)" id=? idx=0x14 tid=9345 prio=5 alive, daemon
at <unknown>(???.c)@0xb7fe9410
at eventTimedWaitNoTransitionImpl+79(event.c:90)@0xb7d6bae0
at eventTimedWaitNoTransition+62(event.c:72)@0xb7d6bb3f
at eventWaitNoTransition+32(event.c:62)@0xb7d6bc31
at mmGCWorkerThread+134(gcthreads.c:797)@0xb7d89d67
at thread_stub+146(lifecycle.c:808)@0xb7e2c333
at start_thread+225(:0)@0x515832
at __clone+93(:0)@0x46ae0e
"(Code Generation Thread 1)" id=4 idx=0x18 tid=9348 prio=5 alive, native_waiting, daemon
at <unknown>(???.c)@0xb7fe9410
at eventTimedWaitNoTransitionImpl+79(event.c:90)@0xb7d6bae0
at syncWaitForSignalNoTransition+81(synchronization.c:28)@0xb7ee7c62
at innerNativeDoWait+894(nativelock.c:614)@0xb7e78caf
at nativeWait+71(nativelock.c:721)@0xb7e79008
at cg_thread+380(compilerqueue.c:203)@0xb7d4be5d
at thread_stub+146(lifecycle.c:808)@0xb7e2c333
at start_thread+225(:0)@0x515832
at __clone+93(:0)@0x46ae0e
"(Code Optimization Thread 1)" id=5 idx=0x1c tid=9349 prio=5 alive, native_waiting, daemon
at <unknown>(???.c)@0xb7fe9410
at eventTimedWaitNoTransitionImpl+79(event.c:90)@0xb7d6bae0
at syncWaitForSignalNoTransition+81(synchronization.c:28)@0xb7ee7c62
at innerNativeDoWait+894(nativelock.c:614)@0xb7e78caf
at nativeWait+71(nativelock.c:721)@0xb7e79008
at cg_thread+380(compilerqueue.c:203)@0xb7d4be5d
at thread_stub+146(lifecycle.c:808)@0xb7e2c333
at start_thread+225(:0)@0x515832
at __clone+93(:0)@0x46ae0e
"(VM Periodic Task)" id=6 idx=0x20 tid=9350 prio=10 alive, native_blocked, daemon
at <unknown>(???.c)@0xb7fe9410
at block_for_safepoint+106(safepoint.c:34)@0xb7ebad5b
at eventTimedWait+239(event.c:83)@0xb7d6bd30
at periodic_task_thread+627(periodictask.c:367)@0xb7e90dd4
at thread_stub+146(lifecycle.c:808)@0xb7e2c333
at start_thread+225(:0)@0x515832
at __clone+93(:0)@0x46ae0e
"Finalizer" id=7 idx=0x24 tid=9351 prio=8 alive, native_waiting, daemon
at <unknown>(???.c)@0xb7fe9410
at eventTimedWaitNoTransitionImpl+79(event.c:90)@0xb7d6bae0
at syncWaitForSignalNoTransition+81(synchronization.c:28)@0xb7ee7c62
at innerNativeDoWait+894(nativelock.c:614)@0xb7e78caf
at nativeWait+71(nativelock.c:721)@0xb7e79008
at RJNI_jrockit_memory_Finalizer_waitForFinalizees+211(finalhandles.c:1007)@0xb7d751f4
at jrockit/memory/Finalizer.waitForFinalizees(J[Ljava/lang/Object;)I(Native Method)
at jrockit/memory/Finalizer.access$700(Finalizer.java:12)
at jrockit/memory/Finalizer$4.run(Finalizer.java:189)
at java/lang/Thread.run(Thread.java:662)
at jrockit/vm/RNI.c2java(IIIII)V(Native Method)
-- end of trace
"Reference Handler" id=8 idx=0x28 tid=9352 prio=10 alive, native_waiting, daemon
at <unknown>(???.c)@0xb7fe9410
at eventTimedWaitNoTransitionImpl+79(event.c:90)@0xb7d6bae0
at syncWaitForSignalNoTransition+81(synchronization.c:28)@0xb7ee7c62
at innerNativeDoWait+894(nativelock.c:614)@0xb7e78caf
at nativeUnlockAndWait+71(nativelock.c:686)@0xb7e790a8
at RJNI_java_lang_ref_Reference_waitForActivatedQueue+38(semiref.c:342)@0xb7ebd9b7
at java/lang/ref/Reference.waitForActivatedQueue(J)Ljava/lang/ref/Reference;(Native Method)
at java/lang/ref/Reference.access$100(Reference.java:11)
at java/lang/ref/Reference$ReferenceHandler.run(Reference.java:82)
at jrockit/vm/RNI.c2java(IIIII)V(Native Method)
-- end of trace
"(Sensor Event Thread)" id=9 idx=0x2c tid=9353 prio=5 alive, native_blocked, daemon
at <unknown>(???.c)@0xb7fe9410
at eventTimedWaitNoTransitionImpl+79(event.c:90)@0xb7d6bae0
at eventTimedWaitNoTransition+62(event.c:72)@0xb7d6bb3f
at eventTimedWait+138(event.c:56)@0xb7d6bccb
at eventWait+32(event.c:50)@0xb7d6bd81
at sensor_event_loop+37(sensor.c:68)@0xb7ebfda6
at thread_stub+146(lifecycle.c:808)@0xb7e2c333
at start_thread+225(:0)@0x515832
at __clone+93(:0)@0x46ae0e
"VM JFR Buffer Thread" id=10 idx=0x30 tid=9354 prio=5 alive, in native, daemon
at <unknown>(???.c)@0xb7fe9410
at bufferthread+2135(vmjfr.c:1008)@0xb71744b8
at run_agent_thread+128(jvmtithreads.c:524)@0xb7e1f361
at thread_stub+146(lifecycle.c:808)@0xb7e2c333
at start_thread+225(:0)@0x515832
at __clone+93(:0)@0x46ae0e
"Timer-0" id=13 idx=0x34 tid=9358 prio=5 alive, waiting, native_blocked, daemon
-- Waiting for notification on: java/util/TaskQueue@0x9f9fc350[fat lock]
at <unknown>(???.c)@0xb7fe9410
at eventTimedWaitNoTransitionImpl+79(event.c:90)@0xb7d6bae0
at syncWaitForSignalNoTransition+81(synchronization.c:28)@0xb7ee7c62
at syncWaitForSignal+157(synchronization.c:85)@0xb7ee7dbe
at syncWaitForJavaSignal+53(synchronization.c:93)@0xb7ee7ea6
at RJNI_jrockit_vm_Threads_waitForNotifySignal+53(rnithreads.c:72)@0xb7eb78a6
at jrockit/vm/Threads.waitForNotifySignal(JLjava/lang/Object;)Z(Native Method)
at java/lang/Object.wait(J)V(Native Method)
at java/lang/Object.wait(Object.java:485)
at java/util/TimerThread.mainLoop(Timer.java:483)
^-- Lock released while waiting: java/util/TaskQueue@0x9f9fc350[fat lock]
at java/util/TimerThread.run(Timer.java:462)
at jrockit/vm/RNI.c2java(IIIII)V(Native Method)
-- end of trace
"Timer-1" id=14 idx=0x38 tid=9363 prio=5 alive, waiting, native_blocked, daemon
-- Waiting for notification on: java/util/TaskQueue@0xa20ee240[fat lock]
at <unknown>(???.c)@0xb7fe9410
at jrockit/vm/Threads.waitForNotifySignal(JLjava/lang/Object;)Z(Native Method)
at java/lang/Object.wait(J)V(Native Method)
at java/util/TimerThread.mainLoop(Timer.java:509)
^-- Lock released while waiting: java/util/TaskQueue@0xa20ee240[fat lock]
at java/util/TimerThread.run(Timer.java:462)
at jrockit/vm/RNI.c2java(IIIII)V(Native Method)
-- end of trace
"[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'" id=15 idx=0x3c tid=9364 prio=5 alive, waiting, native_blocked, daemon
-- Waiting for notification on: netscape/ldap/LDAPResponseListener@0x9724f0c8[fat lock]
at <unknown>(???.c)@0xb7fe9410
at eventTimedWaitNoTransitionImpl+79(event.c:90)@0xb7d6bae0
at syncWaitForSignalNoTransition+81(synchronization.c:28)@0xb7ee7c62
at syncWaitForSignal+157(synchronization.c:85)@0xb7ee7dbe
at syncWaitForJavaSignal+53(synchronization.c:93)@0xb7ee7ea6
at RJNI_jrockit_vm_Threads_waitForNotifySignal+53(rnithreads.c:72)@0xb7eb78a6
at jrockit/vm/Threads.waitForNotifySignal(JLjava/lang/Object;)Z(Native Method)
at java/lang/Object.wait(J)V(Native Method)
at java/lang/Object.wait(Object.java:485)
at netscape/ldap/LDAPMessageQueue.waitForMessage(LDAPMessageQueue.java:200)
^-- Lock released while waiting: netscape/ldap/LDAPResponseListener@0x9724f0c8[recursive]
at netscape/ldap/LDAPMessageQueue.waitFirstMessage(LDAPMessageQueue.java:101)
^-- Lock released while waiting: netscape/ldap/LDAPResponseListener@0x9724f0c8[fat lock]
at netscape/ldap/LDAPConnection.sendRequest(LDAPConnection.java:1796)
^-- Holding lock: netscape/ldap/LDAPConnection@0x9721f310[biased lock]
at netscape/ldap/LDAPConnection.simpleBind(LDAPConnection.java:1763)
at netscape/ldap/LDAPConnection.authenticate(LDAPConnection.java:1264)
at netscape/ldap/LDAPConnection.authenticate(LDAPConnection.java:1273)
at netscape/ldap/LDAPConnection.bind(LDAPConnection.java:1562)
at weblogic/security/providers/authentication/LDAPAtnDelegate$LDAPFactory.newInstance(LDAPAtnDelegate.java:4134)
at weblogic/security/utils/Pool.newInstance(Pool.java:37)
at weblogic/security/utils/Pool.getInstance(Pool.java:33)
at weblogic/security/providers/authentication/LDAPAtnDelegate.getConnection(LDAPAtnDelegate.java:3478)
at weblogic/security/providers/authentication/LDAPAtnDelegate.getConnection(LDAPAtnDelegate.java:3470)
at weblogic/security/providers/authentication/LDAPAtnDelegate.authenticate(LDAPAtnDelegate.java:3522)
at weblogic/security/providers/authentication/LDAPAtnLoginModuleImpl.login(LDAPAtnLoginModuleImpl.java:227)
at com/bea/common/security/internal/service/LoginModuleWrapper$1.run(LoginModuleWrapper.java:110)
at jrockit/vm/AccessController.doPrivileged(AccessController.java:254)
at jrockit/vm/AccessController.doPrivileged(AccessController.java:268)
at com/bea/common/security/internal/service/LoginModuleWrapper.login(LoginModuleWrapper.java:106)
at jrockit/vm/RNI.c2java(IIIII)V(Native Method)
at jrockit/vm/Reflect.invokeMethod(Ljava/lang/Object;Ljava/lang/Object;[Ljava/lang/Object;)Ljava/lang/Object;(Native Method)
at sun/reflect/NativeMethodAccessorImpl.invoke0(Ljava/lang/reflect/Method;Ljava/lang/Object;[Ljava/lang/Object;)Ljava/lang/Object;(Native Method)
at sun/reflect/NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun/reflect/DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java/lang/reflect/Method.invoke(Method.java:597)
at javax/security/auth/login/LoginContext.invoke(LoginContext.java:769)
at javax/security/auth/login/LoginContext.access$000(LoginContext.java:186)
at javax/security/auth/login/LoginContext$4.run(LoginContext.java:683)
at jrockit/vm/AccessController.doPrivileged(AccessController.java:254)
at jrockit/vm/AccessController.doPrivileged(AccessController.java:268)
at javax/security/auth/login/LoginContext.invokePriv(LoginContext.java:680)
at javax/security/auth/login/LoginContext.login(LoginContext.java:579)
at com/bea/common/security/internal/service/JAASLoginServiceImpl.login(JAASLoginServiceImpl.java:113)
at jrockit/vm/RNI.c2java(IIIII)V(Native Method)
at jrockit/vm/Reflect.invokeMethod(Ljava/lang/Object;Ljava/lang/Object;[Ljava/lang/Object;)Ljava/lang/Object;(Native Method)
at sun/reflect/NativeMethodAccessorImpl.invoke0(Ljava/lang/reflect/Method;Ljava/lang/Object;[Ljava/lang/Object;)Ljava/lang/Object;(Native Method)
at sun/reflect/NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun/reflect/DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java/lang/reflect/Method.invoke(Method.java:597)
at com/bea/common/security/internal/utils/Delegator$ProxyInvocationHandler.invoke(Delegator.java:57)
at $Proxy28.login(Ljava/lang/String;Ljavax/security/auth/callback/CallbackHandler;Lweblogic/security/service/ContextHandler;)Lcom/bea/common/security/service/Identity;(Unknown Source)
at weblogic/security/service/internal/WLSJAASLoginServiceImpl$ServiceImpl.login(WLSJAASLoginServiceImpl.java:89)
at com/bea/common/security/internal/service/JAASAuthenticationServiceImpl.authenticate(JAASAuthenticationServiceImpl.java:82)
at jrockit/vm/RNI.c2java(IIIII)V(Native Method)
at jrockit/vm/Reflect.invokeMethod(Ljava/lang/Object;Ljava/lang/Object;[Ljava/lang/Object;)Ljava/lang/Object;(Native Method)
at sun/reflect/NativeMethodAccessorImpl.invoke0(Ljava/lang/reflect/Method;Ljava/lang/Object;[Ljava/lang/Object;)Ljava/lang/Object;(Native Method)
at sun/reflect/NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun/reflect/DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java/lang/reflect/Method.invoke(Method.java:597)
at com/bea/common/security/internal/utils/Delegator$ProxyInvocationHandler.invoke(Delegator.java:57)
at $Proxy46.authenticate(Ljavax/security/auth/callback/CallbackHandler;Lweblogic/security/service/ContextHandler;)Lcom/bea/common/security/service/Identity;(Unknown Source)
at weblogic/security/service/WLSJAASAuthenticationServiceWrapper.authenticate(WLSJAASAuthenticationServiceWrapper.java:40)
at weblogic/security/service/PrincipalAuthenticator.authenticate(PrincipalAuthenticator.java:348)
at weblogic/security/service/CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(CommonSecurityServiceManagerDelegateImpl.java:929)
at weblogic/security/service/CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1050)
at weblogic/security/service/SecurityServiceManager.initialize(SecurityServiceManager.java:873)
at weblogic/security/SecurityService.start(SecurityService.java:141)
at weblogic/t3/srvr/SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic/work/ExecuteThread.execute(ExecuteThread.java:207)
at weblogic/work/ExecuteThread.run(ExecuteThread.java:176)
at jrockit/vm/RNI.c2java(IIIII)V(Native Method)
-- end of trace
"JFR request timer" id=16 idx=0x40 tid=9365 prio=5 alive, waiting, native_blocked, daemon
-- Waiting for notification on: java/util/TaskQueue@0xa2049280[fat lock]
at <unknown>(???.c)@0xb7fe9410
at eventTimedWaitNoTransitionImpl+79(event.c:90)@0xb7d6bae0
at syncWaitForSignalNoTransition+81(synchronization.c:28)@0xb7ee7c62
at syncWaitForSignal+157(synchronization.c:85)@0xb7ee7dbe
at syncWaitForJavaSignal+53(synchronization.c:93)@0xb7ee7ea6
at RJNI_jrockit_vm_Threads_waitForNotifySignal+53(rnithreads.c:72)@0xb7eb78a6
at jrockit/vm/Threads.waitForNotifySignal(JLjava/lang/Object;)Z(Native Method)
at java/lang/Object.wait(J)V(Native Method)
at java/lang/Object.wait(Object.java:485)
at java/util/TimerThread.mainLoop(Timer.java:483)
^-- Lock released while waiting: java/util/TaskQueue@0xa2049280[fat lock]
at java/util/TimerThread.run(Timer.java:462)
at jrockit/vm/RNI.c2java(IIIII)V(Native Method)
-- end of trace
"weblogic.time.TimeEventGenerator" id=18 idx=0x44 tid=9366 prio=9 alive, waiting, native_blocked, daemon
-- Waiting for notification on: weblogic/time/common/internal/TimeTable@0xa2089c70[fat lock]
at <unknown>(???.c)@0xb7fe9410
at jrockit/vm/Threads.waitForNotifySignal(JLjava/lang/Object;)Z(Native Method)
at java/lang/Object.wait(J)V(Native Method)
at weblogic/time/common/internal/TimeTable.snooze(TimeTable.java:286)
^-- Lock released while waiting: weblogic/time/common/internal/TimeTable@0xa2089c70[fat lock]
at weblogic/time/common/internal/TimeEventGenerator.run(TimeEventGenerator.java:117)
at java/lang/Thread.run(Thread.java:662)
at jrockit/vm/RNI.c2java(IIIII)V(Native Method)
-- end of trace
"JMAPI event thread" id=19 idx=0x48 tid=9367 prio=5 alive, in native, daemon
at <unknown>(???.c)@0xb7fe9410
at eventTimedWaitNoTransitionImpl+79(event.c:90)@0xb7d6bae0
at syncWaitForSignalNoTransition+81(synchronization.c:28)@0xb7ee7c62
at innerNativeDoWait+526(nativelock.c:614)@0xb7e78b3f
at nlMonitorWaitInner+79(nativelock.c:1112)@0xb7e78df0
at nlMonitorWaitNoTransition+38(nativelock.c:1132)@0xb7e78e47
at nativeRawMonitorWait+78(rawmonitor.c:161)@0xb7ea8caf
at jvmti_RawMonitorWait+111(jvmtirawmonitors.c:95)@0xb7e1b420
at threadProc+291(jmapi.c:305)@0x90452bd4
at run_agent_thread+128(jvmtithreads.c:524)@0xb7e1f361
at thread_stub+146(lifecycle.c:808)@0xb7e2c333
at start_thread+225(:0)@0x515832
at __clone+93(:0)@0x46ae0e
"weblogic.timers.TimerThread" id=20 idx=0x4c tid=9368 prio=9 alive, waiting, native_blocked, daemon
-- Waiting for notification on: weblogic/timers/internal/TimerThread@0xa203dbf0[fat lock]
at <unknown>(???.c)@0xb7fe9410
at jrockit/vm/Threads.waitForNotifySignal(JLjava/lang/Object;)Z(Native Method)
at java/lang/Object.wait(J)V(Native Method)
at weblogic/timers/internal/TimerThread$Thread.run(TimerThread.java:262)
^-- Lock released while waiting: weblogic/timers/internal/TimerThread@0xa203dbf0[fat lock]
at jrockit/vm/RNI.c2java(IIIII)V(Native Method)
-- end of trace -
Hi -
I have installed OIM 11g r2 ps2, I an tring to start my Admin and SOA server :
1. Though my admin server is coming up fine, but I am getting the following error when I am trying to start Admin server.
####<Apr 22, 2015 12:22:27 AM PDT> <Error> <Deployer> <devoimx003> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS
Kernel>> <> <> <1429687347654> <BEA-149205> <Failed to initialize the application 'opss-DBDS' due to error weblogic.security.internal.encryption.EncryptionServiceException.
weblogic.security.internal.encryption.EncryptionServiceException
at weblogic.security.internal.encryption.JSafeEncryptionServiceImpl.decryptBytes(JSafeEncryptionServiceImpl.java:139)
at weblogic.security.internal.encryption.JSafeEncryptionServiceImpl.decryptString(JSafeEncryptionServiceImpl.java:187)
at weblogic.security.internal.encryption.ClearOrEncryptedService.decrypt(ClearOrEncryptedService.java:96)
at sun.reflect.GeneratedMethodAccessor143.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at weblogic.descriptor.DescriptorManager$SecurityServiceImpl$SecurityProxy._invokeServiceMethod(DescriptorManager.java:173)
at weblogic.descriptor.DescriptorManager$SecurityServiceImpl$SecurityProxy.decrypt(DescriptorManager.java:192)
at weblogic.descriptor.DescriptorManager$SecurityServiceImpl.decrypt(DescriptorManager.java:114)
at weblogic.descriptor.internal.AbstractDescriptorBean._decrypt(AbstractDescriptorBean.java:1092)
at weblogic.j2ee.descriptor.wl.JDBCDriverParamsBeanImpl.getPassword(JDBCDriverParamsBeanImpl.java:337)
at weblogic.jdbc.common.internal.DataSourceConnectionPoolConfig.getDriverProperties(DataSourceConnectionPoolConfig.java:368)
at weblogic.jdbc.common.internal.DataSourceConnectionPoolConfig$2.run(DataSourceConnectionPoolConfig.java:304)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:146)
at weblogic.jdbc.common.internal.DataSourceConnectionPoolConfig.initJDBCParameters(DataSourceConnectionPoolConfig.java:300)
at weblogic.jdbc.common.internal.DataSourceConnectionPoolConfig.access$000(DataSourceConnectionPoolConfig.java:24)
at weblogic.jdbc.common.internal.DataSourceConnectionPoolConfig$1.run(DataSourceConnectionPoolConfig.java:78)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:146)
at weblogic.jdbc.common.internal.DataSourceConnectionPoolConfig.getPoolProperties(DataSourceConnectionPoolConfig.java:75)
at weblogic.jdbc.common.internal.ConnectionPool.doStart(ConnectionPool.java:1329)
at weblogic.jdbc.common.internal.ConnectionPool.start(ConnectionPool.java:176)
at weblogic.jdbc.common.internal.ConnectionPoolManager.createAndStartPool(ConnectionPoolManager.java:507)
at weblogic.jdbc.common.internal.ConnectionPoolManager.createAndStartPool(ConnectionPoolManager.java:428)
at weblogic.jdbc.module.JDBCModule.prepare(JDBCModule.java:280)
at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:199)
at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:517)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:159)
at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:45)
at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:648)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:191)
at weblogic.application.internal.SingleModuleDeployment.prepare(SingleModuleDeployment.java:44)
at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:154)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:60)
at weblogic.deploy.internal.targetserver.SystemResourceDeployment.prepare(SystemResourceDeployment.java:55)
at weblogic.management.deploy.internal.DeploymentAdapter$1.doPrepare(DeploymentAdapter.java:39)
at weblogic.management.deploy.internal.DeploymentAdapter.prepare(DeploymentAdapter.java:191)
at weblogic.management.deploy.internal.AppTransition$1.transitionApp(AppTransition.java:21)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
at weblogic.management.deploy.internal.ConfiguredDeployments.prepare(ConfiguredDeployments.java:165)
at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:122)
at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:180)
at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:96)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
Caused By: weblogic.security.internal.encryption.EncryptionServiceException
at weblogic.security.internal.encryption.JSafeEncryptionServiceImpl.decryptBytes(JSafeEncryptionServiceImpl.java:139)
at weblogic.security.internal.encryption.JSafeEncryptionServiceImpl.decryptString(JSafeEncryptionServiceImpl.java:187)
at weblogic.security.internal.encryption.ClearOrEncryptedService.decrypt(ClearOrEncryptedService.java:96)
at sun.reflect.GeneratedMethodAccessor143.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at weblogic.descriptor.DescriptorManager$SecurityServiceImpl$SecurityProxy._invokeServiceMethod(DescriptorManager.java:173)
at weblogic.descriptor.DescriptorManager$SecurityServiceImpl$SecurityProxy.decrypt(DescriptorManager.java:192)
at weblogic.descriptor.DescriptorManager$SecurityServiceImpl.decrypt(DescriptorManager.java:114)
at weblogic.descriptor.internal.AbstractDescriptorBean._decrypt(AbstractDescriptorBean.java:1092)
at weblogic.j2ee.descriptor.wl.JDBCDriverParamsBeanImpl.getPassword(JDBCDriverParamsBeanImpl.java:337)
at weblogic.jdbc.common.internal.DataSourceConnectionPoolConfig.getDriverProperties(DataSourceConnectionPoolConfig.java:368)
at weblogic.jdbc.common.internal.DataSourceConnectionPoolConfig$2.run(DataSourceConnectionPoolConfig.java:304)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:146)
at weblogic.jdbc.common.internal.DataSourceConnectionPoolConfig.initJDBCParameters(DataSourceConnectionPoolConfig.java:300)
at weblogic.jdbc.common.internal.DataSourceConnectionPoolConfig.access$000(DataSourceConnectionPoolConfig.java:24)
at weblogic.jdbc.common.internal.DataSourceConnectionPoolConfig$1.run(DataSourceConnectionPoolConfig.java:78)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:146)
at weblogic.jdbc.common.internal.DataSourceConnectionPoolConfig.getPoolProperties(DataSourceConnectionPoolConfig.java:75)
at weblogic.jdbc.common.internal.ConnectionPool.doStart(ConnectionPool.java:1329)
at weblogic.jdbc.common.internal.ConnectionPool.start(ConnectionPool.java:176)
at weblogic.jdbc.common.internal.ConnectionPoolManager.createAndStartPool(ConnectionPoolManager.java:507)
at weblogic.jdbc.common.internal.ConnectionPoolManager.createAndStartPool(ConnectionPoolManager.java:428)
at weblogic.jdbc.module.JDBCModule.prepare(JDBCModule.java:280)
at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:199)
at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:517)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:159)
at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:45)
at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:648)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:191)
at weblogic.application.internal.SingleModuleDeployment.prepare(SingleModuleDeployment.java:44)
at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:154)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:60)
at weblogic.deploy.internal.targetserver.SystemResourceDeployment.prepare(SystemResourceDeployment.java:55)
at weblogic.management.deploy.internal.DeploymentAdapter$1.doPrepare(DeploymentAdapter.java:39)
at weblogic.management.deploy.internal.DeploymentAdapter.prepare(DeploymentAdapter.java:191)
at weblogic.management.deploy.internal.AppTransition$1.transitionApp(AppTransition.java:21)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
at weblogic.management.deploy.internal.ConfiguredDeployments.prepare(ConfiguredDeployments.java:165)
at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:122)
at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:180)
at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:96)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
2. My SOA server is coming up but in admin mode and giving OPSS connections errors.
Any help is really appreciated!
Thanks,
SKHi Faisal -
is your domain in development mode or production mode?
- While configuring my domian , I had selected Prod Mode, but pon start up when I see in admin server console, it is starting in developement mode already ?
Any idea how, why ?
if its production mode you can switch to development mode, change all the credentials in the config.xml and configurations under sub folders to cleartext and start the server..
- Let me still try these and get back to you.
Thanks,
SK -
Installing All (9iDB,9iDS and report server) in same machine
I want to use one machine only.
I have installed 9i database, and on same 9iDS.
and created a report server on same machine
i am facing a problem
all application runs very fine but on running report from
forms by using webs.show_document()
a new page comes and states
Opening page http://server1:8888/reports/rwservlet/getjobid..
and hangs there only.and it hang such that after closing the page
application also does not work.i have to restart OC4J
i have seen in trace file report finished successfully
and also in report\cache directory report file is alreasy made.
now when i install 9iDS in another machine and use the other machine as application server,report server be in
any machine it work fine.
all report are displayed. no problem comes in that case.
But i have to use only one machine .
pls state me solution
thanks a lot
regards
rajI HAVE SEEN IN JINIT CONSOLE
trace level 5
on server where (9iDS and database both installed)
Opening http://server1:8888/forms90/l90servlet;jsessionid=c995d4251dd849878b75cf8649b1d477
Connecting http://server1:8888/forms90/l90servlet;jsessionid=c995d4251dd849878b75cf8649b1d477 with no proxy
Opening http://server1:8888/forms90/l90servlet;jsessionid=c995d4251dd849878b75cf8649b1d477
Connecting http://server1:8888/forms90/l90servlet;jsessionid=c995d4251dd849878b75cf8649b1d477 with no proxy
Opening http://server1:8888/forms90/l90servlet;jsessionid=c995d4251dd84987
and so on..
on another machine
from where reports comes
this is trace file
Connecting http://pdc:8888/forms90/l90servlet;jsessionid=db17d7a493484cb8ac2ac70498be1448 with no proxy
Connecting http://pdc:8888/forms90/l90servlet;jsessionid=db17d7a493484cb8ac2ac70498be1448 with cookie "getfileauthid=c0roXNhhSA=="
Opening http://pdc:8888/forms90/l90servlet;jsessionid=db17d7a493484cb8ac2ac70498be1448
now i see in first stage it is not connecting with
cookie -
Where to increase Java Heap settings for Admin and Managed Server.
Hello Experts
I am having issue with increasing the JVM memory arguments for the Admin and Managed Servers. I have tried in a couple of places to increase the memory arguments (Xms and Xmx to 1024m)but its not taking effect. When I start the Admin Server and Managed server , I do not see the increased Heap settings. Here is what I see -
"Starting WLS with line : /oracle/app/bi/Oracle_BI1/jdk/java -server - Xms256m -Xmx512m -XX:MaxPermSize=512m"
I have the following memory arguments in the setDomainEnv.sh located in <DOMAIN_HOME>/bin
XMS_SUN_64BIT ="2048"
export XMS_SUN_64BIT
XMX_SUN_64BIT="2048"
export XMX_SUN_64BIT
Looks like this did not work , so I added an entry in the setOBIDomainEnv.sh file hoping to increase the Java memory , but that does not work either. Below is from setOBIDomainEnv.sh file -
Really, trying to understand where/how the JVM settings are controlled from. Please guide me.
Appreciate your time.
RakeshUnder setobidomainenv.sh you will also find the admin server tag's so you need to increase the jvm parameters in there too. Depending upon your java vendor and bit version(Sun/Oracle/IBM/HP and 32-bit vs 64-bit ) So change accordingly
eg:
if server group is not obi then we can assume that it is Admin Server
if [ "${JAVA_VENDOR}" = "Sun" ] ; then
# -UseSSE42Intrinsics required for server running EM
if [ "${JAVA_USE_64BIT}" = "true" ] ; then
# Admin Server memory args for 64-bit Sun JVM
SERVER_MEM_ARGS="-Xms256m -Xmx1024m -XX:MaxPermSize=512m -XX:-UseSSE42Intrinsics"
export SERVER_MEM_ARGS
similarly in setdomain.sh you will find the args as below:
XMX_SUN_64BIT="512"
export XMX_SUN_64BIT
XMS_SUN_64BIT="256"
export XMS_SUN_64BIT
if [ "${JAVA_VENDOR}" = "Sun" ] ; then
WLS_MEM_ARGS_64BIT="-Xms256m -Xmx512m"
export WLS_MEM_ARGS_64BIT
WLS_MEM_ARGS_32BIT="-Xms256m -Xmx512m"
export WLS_MEM_ARGS_32BIT
after setting them just execute them ./setdomain.sh and ./setobidomainenv.sh and then try to start the admin and managed servers and see the process running with the updated values. -
NodeManager not able to start second managed server in same machine
Hi,
I am facing an issue, I am not able start a second ManagedServer(MG2) using nodemanager (through AdminConsole)
My setup is as below:
Server 1
1) Admin Server + ManagedServer (MG1) (INSTALL LOCATION: /opt/web/MyServer1)
2) Second Managed Server (MG2) (INSTALL LOCATION: /opt/web/MyServer2)
Both belong a same Domain (MyDomain) and NodeManager runs from /opt/web/MyServer1
I can start MG1, but not MG2.
I did
1) nmEnroll for (1) nmEnroll('/opt/web/MyServer1/domains/MyDomain','/opt/web/MyServer1/wlserver_10.3/common/nodemanager')
2) nmEnroll for (2) nmEnroll('/opt/web/MyServer2/domains/MyDomain','/opt/web/MyServer2/wlserver_10.3/common/nodemanager')
I see following error in nodemanager.log,
The domain 'MyDomain' at '/opt/web/MyServer2/domains/MyDomain' was not registered in the nodemanager.domains file and dy
namic domain registration is not supported. Please register the domain in the nodemanager.domains file.
I can start the MG2 if I manually edit nodemanager.domains to point /opt/web/MyServer2/domains/MyDomain.
Is there a way to configure multiple domains locations in nodemanager.domains, so Nodemanger can start managed server installed in different location?Your nmEnroll shows 2 different domain path values supplied - which means you have told NM to try to connect to 2 different domains
1) nmEnroll for (1) nmEnroll('/opt/web/MyServer1/domains/MyDomain','/opt/web/MyServer1/wlserver_10.3/common/nodemanager')
2) nmEnroll for (2) nmEnroll('/opt/web/MyServer2/domains/MyDomain','/opt/web/MyServer2/wlserver_10.3/common/nodemanager')
You also show 2 distinct node managers you are trying to configure.
nmEnroll enrolls a domain, not an individual server. If you have only 1 installation of nodemanager, and only 1 domain, then you would only need one nmEnroll command. -
Mail and web server on same machine
hi to all,
i have jes 4 suite installed on the same machin: uwc runs on port 81 and 443 (secure) and mail can be accessed on:
https://mail.dom.com
I want to create a new web instance to host the web content. It will be access at:
http://www.dom.com
What needs to be done so that users do not access
https://www.dom.com as web mail
and http://mail.dom.com as web server?
thanks!
Linda.What is on port 80 is the webserver that should host the website.
What is on port 81 is the webserver instance hosting the webmail. I installed a certificate and created a new LS so that users access the webmail through https. port 81 is firewalled.
There is no command called 'host' on Solaris. Actually the DNS admin will register www.dom.com and mail.dom.com to have the same IP since mail and web are installed on the same machine.
The server processes that exist should be the mail processes and the 2 web instances processes. the first instance should listen to port 443 and 81. The second instance should listen to port 80.
the urls that a user might type:
https://mail.dom.com
http://www.dom.com
http://mail.dom.com
the last url is what I want to change. Normally this should display the website. I don't want this result. I want to display the webmail page i.e. https://mail.dom.com. If this is not feasible, I want to display a page showing the 2 other urls.
thanks, -
Race condition between admin and managed server?
When I start my managed server, my admin server gets the following complaint
in its log file:
Jun 20, 2001 4:39:37 PM PDT Critical Log Management Unable to
contact managed server - rat5, at 172.16.1.26:7027
. Domain
logfile will not contain messages from this server.
java.lang.IllegalArgumentException: Invalid user name or password
at
weblogic.management.logging.DomainLogHandler.getMBeanHome(DomainLogHandler.j
ava:281)
at
weblogic.management.logging.DomainLogHandler.subscribeToServer(DomainLogHand
ler.java:243)
at
weblogic.management.logging.DomainLogHandler.registerToMe(DomainLogHandler.j
ava:183)
at java.lang.reflect.Method.invoke(Native Method)
at
weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl
.java:562)
at
weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:5
48)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1555)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1523)
at
weblogic.management.internal.RemoteMBeanServerImpl_WLSkel.invoke(RemoteMBean
ServerImpl_WLSkel.java:382)
at
weblogic.rmi.internal.BasicServerAdapter.invoke(BasicServerAdapter.java:373)
at
weblogic.rmi.internal.BasicServerAdapter.invoke(BasicServerAdapter.java:237)
at
weblogic.rmi.internal.BasicRequestHandler.handleRequest(BasicRequestHandler.
java:118)
at
weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest.java:1
7)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:137)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
This happens while my managed server is still booting. It isn't listening on
port 7027 until a few seconds later. In the managed server rat5's log file
is
Jun 20, 2001 4:39:58 PM PDT Notice WebLogicServer WebLogic
Server started
Jun 20, 2001 4:39:58 PM PDT Notice WebLogicServer ListenThread
listening on port 7027
which is 21 seconds after the message in the admin log file. What do I have
to do to have the admin server wait until the managed server is up before
contacting it? Am I assessing the problem correctly?nope
a server can be either Admin or Managed, there is no such thing as a Admin+Managed server.
A domain expects you to specify which instance is an Admin, in config.xml you find
<admin-server-name>AdminServer</admin-server-name>
But this is not a problem for you, to all effects a domain without any managed servers and with only 1 Admin is a perfectly legal environment,
you can deploy your applications to the Admin and be happy.
Actually this is a common setup for Development environments.
Of course in production you want to set up a proper environment with cluster etc....
Maybe you are looking for
-
I am trying to use overdrive and keep getting error 2004.
I keep getting error 2004 on overdrive. How do I reset my adobe?
-
Muse tooltip widget has problems
I'm placing a graphic with states in the trigger area of a tooltip widget. The tooltip pop up shows up correctly in preview or preview in web browser modes, however the trigger does not allow a user to see the icon states, nor can the user click thro
-
Mavericks and Firefox scrolling
I've updated to Mavericks and just tonight, I went to Firefox 25. Since then, the trackpad scrolling has failed. I can use one finger to move the cursor about, and the scrolling works with one finger holding the cursor on the scroll bar and the thu
-
Initializi​ng menu ring elements in array
I know that it is possible to initialize the elements of a menu ring using the property STRINGS[]. I have an array of 16 menu rings for labeling DAQ channels, and need to initialize the rings based of the set of available sensors (ie some sensors are
-
New PB pixel size a problem for reading and viewing?
Was about to order a new 15 inch, but my friend says don't do it...the smaller pixels make reading text impossible, and other things hard to distinuish. Is this an exageration, or a valid concern? I was quite excited to finally go ahead with the purc