Adobe 6.0 Standard  - reissue of signing certificate for signing

I have a problem where an employee re-applied for their PKI (Private Key Identifier) used for signing. They were having problems with their card and needed a new one.
Now all of the old documents that were once certified and signed, Adobe says under Signature Properties: Document certification is INVALID
- The document has not been modified since it was certified
- The signer's identity is invalid because the signers Certificate has been revoked
How do I handle lost or stolen PKI cards, or employees who have left the company. We handle all certificate authentication internally. What becomes of all the old documents that no longer have valid signatures? Is there a way to recognize the old certificates as valid?

Possibly when applying for the PKI again you have the choice of
whether the old one is revoked. If, for instance, it is based on a
password that has been exposed, or a hardware card that is lost, it is
very important that ALL documents be revoked, because there is no way
to tell the difference between those validly signed, and those later
fraudulently signed.
Hopefully someone else will have more specific advice for this case.
Aandi Inston

Similar Messages

  • Possible to select self-signed certificate for client validation when connecting to VPN with EAP-TLS

    In windows 8.2, I have a VPN connection configured with PPTP as the outer protocol and EAP : "Smart card or other certificate ..." as the inner protocol. Under properties, in the "When connecting" section I've selected "Use a certificate
    on this computer" and un-checked "Use simple certificate selection".
    My preference would be to use separate self-signed certificates for all clients rather than having a common root certificate that signed all of the individual client certificates. I've tried creating the self-signed certificate both with and without the
    client authentication EKU specified, and I've added the certificate to the trusted root certificate authority store on the client. But when I attempt to connect to the VPN I can not get the self signed certificate to appear on the "Choose a certificate"
    drop down.
    Are self signed certificates supported for this use in EAP-TLS? If it makes a difference, I'm working with makecert (not working with a certificate server).
    TIA,
    -Rick

    Hi Rick,
    Thank you for your patience.
    According to your description, would you please let me know what command you were using to make a self-signed certificate by tool makecert? I would like to try to reproduce this issue. Also based on my experience, please let me
    know if the certificate has private key associated and be present in the local machine store. Hence, please move the certificate from the trusted root certificate authority store to personal store.
    Best regards,
    Steven Song
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • Failed to create machine self-signed certificate for site role [SMS_SQL_SERVER]

    SCCM 2012 has been successfully installed on the server:
    SRVSCCM.
    The database is on SQL Server 2008 R2 SP1 CU6 Failover Cluster (CLS-SQL4\MSSQLSERVER04)
    Cluster nodes: SQL01 and SQL01. On all nodes made necessary the Security Setup of SCCM. No errors and warning on SCCM Monitoring.
    The cluster service is running on the account: sqlclusteruser
    The account has the appropriate SPN are registered:
    setspn -L domain\sqlclusteruser
    Registered ServicePrincipalNames for CN=SQL Cluster,OU=SQL,OU=Users special,OU=MAIN,DC=domain,DC=local:
    MSSQLSvc/CLS-SQL4
    MSSQLSvc/CLS-SQL4.domain.local
    MSSQLSvc/CLS-SQL4:11434
    MSSQLSvc/CLS-SQL4.domain.local:11434
    After some time on the cluster hosts every day started appearing new folders with files inside:
    srvboot.exe
    srvboot.ini
    srvboot.log
    srvboot.log contains the following information:
    SMS_SERVER_BOOTSTRAP_SRVSCCM.domain.local_SMS_SQL_SERVER started.
    Microsoft System Center 2012 Configuration Manager v5.00 (Build 7711)
    Copyright (C) 2011 Microsoft Corp.
    Command line: "SMS_SERVER_BOOTSTRAP_SRVSCCM.domain.local_SMS_SQL_SERVER CAS K:\SMS_SRVSCCM.domain.local_SMS_SQL_SERVER8 /importcertificate SOFTWARE\MicrosoftCertBootStrap\ SMS_SQL_SERVER".
    Set current directory to K:\SMS_SRVSCCM.domain.local_SMS_SQL_SERVER8.
    Site server: SRVSCCM.domain.local_SMS_SQL_SERVER.
    Importing machine self-signed certificate for site role [SMS_SQL_SERVER] on Server [SQL01]...
    Failed to retrieve SQL Server service account.
    Bootstrap operation failed: Failed to create machine self-signed certificate for site role [SMS_SQL_SERVER].
    Disconnecting from Site Server.
    SMS_SERVER_BOOTSTRAP_SRVSCCM.domain.local_SMS_SQL_SERVER stopped.

    The site server is trying to install the sms_backup agent on the SQL Server Cluster nodes.
    Without successfull bootstrap the siteserver backup is not able to run successfully.
    Try grant everyone the read permisson on
    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\SMS on the SQL server nodes.
    This worked for me.
    After that a Folder named "SMS_<SITESERVER-FQDN>" appeared on C: on the SQL Cluster nodes, and a "SMS_SITE_SQL_BACKUP_FQDN" Service should be installed.
    After the new Folder is created and the new Service is installed, you can safely remove the bootstrap Service by opening a command prompt and enter:
    sc delete "SMS_SERVER_BOOTSTRAP_FQDN-of-SiteServer_SMS_SQL_SERVER"

  • Self Signed Certificate for Web Proxy 4.0.2

    Does anyone have instructions on how to create and install self signed Certificate for Web Proxy Server 4.0.2? My OS is RHEL 4.
    Shed.

    Unfortunately you will not be able to do that from the GUI.
    You will have to use certutil frin proxy-install/bin/proxy/admin/bin/certutil
    Make sure that your LD_LIBRARY_PATH includes proxy-install/bin/proxy/lib
    (start -shell will give you a shell with all necessary paths set.)
    create a file called password-file which contains your password to your cert database
    your cert database resides in the alias directory of proxy installation.
    certutil -S -s "CN=My Issuer" -n myissuer -x -t "C,C,C" -1 -2 -5 -m 1234
    -f password-file -d certdir

  • How to replace self-signed certificate for enterprise manager console

    Does anyone know how to change self-signed certificate for https access to Enterprise Manager console, which is issued during installation of Oracle 11g?

    Well, this might not be much help, but for 10g, on AIX, docID 1171558.1 describes how to create a new certificate.
    Not sure how relevant it will be for 11g, sorry :(

  • CA signed certificate for Jabber 4 windows

    Hi,
    I have a CA signed certificate for my J4W which is working my question is how can I get J4W when you login the first time after installation not to prompt for you to accept the certificate and it does it 4 times, after that you never get it a again, but for bulk roll out purposes is there a way I can bypass this issue?
    Thanks in advance.

    I'm just working through this too, with a Microsoft domain-integrated CA.
    Some of the other posts were not clear in regard to WHICH cert gets dealt with in which way. Someone please let me know if this process below is inaccurate or incomplete.
    Assuming you have three different severs and only one of each type: CUCM, IMPS, UCxN
    -Generate CSRs for the CUCM, IMPS, UCxN tomcat self-signed certs and export them as clearly named CSR files (3 of).
    -Generate a CSR for the IMPS xmpp self-signed cert and export it as a clearly named CSR file (1 of).
    -Sign all four CSRs with the CA web browser https://ipaddress/certsrv.
    -Export the CA's root certificate in Base64 format using the cert authority name as the file name (only for clarity) e.g. mydomain-AD-CA.cer. Do not rename the file after download.
    -Import the CA's root certificate into each Cisco UC server's tomcat-trust and into the IMPS xmpp-trust. This must be done before the next step.
    -import the CA-signed Cisco UC server SSL certs (that started out as CSRs) as tomcat certs. Import the CA-signed xmpp cert as an IMPS xmpp cert. This replaces the tomcat (and IMPS xmpp) certs with certs that have been signed by the CA.
    -restart the Cisco Tomcat feature service and the Cisco XMPP Router service on each Cisco UC appliance using the CLI "utils service restart Cisco Tomcat"
    -restart the Cisco XCP Router network service on IMPS.
    -Install the CA's root certificate into the client's (assuming Windows) Manage User Certificates > User > Trusted Root Certification Authorities cert store. If you have a domain-integrated MS CA, this will already exist (and should exist, or something else is wrong, or not completed yet with the PKI Infrastructure setup). Look in the User > Trusted Root Certification Authorities cert store - if you can see the CA's root cert that you just installed = great.
    -Test 1: Browse to CUCM by FQDN using IE. https://cucm.mydomain.com/ccmadmin. You should get a perfect alert-free connection to CUCM. This proves that the PKI infrastructure is good.
    -Test 2: Start J4W. It should start up without any popup alerts providing the UC Service Profile and CSF Device config only use FQDNs, that match the certificates you signed with the CA
    -BTW: If you've previously manually accepted J4W popup alerts, before starting J4W go into Manage User Certificates on the Windows client and find and remove all self-signed Cisco UC  appliance certs. Leaving them there will fool you into thinking you've done a complete job when in fact it's not the case.
    ---Well that 's the theory anyway.

  • Generating Self Signed Certificate for iPlanet Directory Server for testing

    Hi Experts,
    I am unable to find how to generate self signed certificate for iPlanet Directory Server for testing purpose. Actually what i mean is i want to connect to the iPlanet LDAP Server with LDAPS:// rather than LDAP:// for Secured LDAP Authentication. For this purpose How to create a Dummy Certificate to enable iPlanet Directory Server SSL. I searched in google but no help. Please provide me the solution how to test it.
    Thanks in Advance,
    Kalyan

    Here's one I did earlier.
    Refers to Solaris 10
    SSL Security
    add a new certificate that lasts for ten years (120 months).
    stop the instance:
    dsadm stop <instance>
    Remove DS from smf control:
    dsadm disable-service <instance>
    Change Certificate Database Password:
    dsadm set-flags <instance> cert-pwd-prompt=on
         Choose the new certificate database password:
         Confirm the new certificate database password:
    Certificate database password successfully updated.
    Restart the instance from the dscc:
    DSCC -> start <instance>
    Now add a new Certificate which lasts for ten years (120 months; -v 120):
    `cd <instance_path>`
    `certutil -S -d . -P slapd- -s "CN=<FQDN_server_name>" �n testcert �v 120 -t T,, -x`
         Enter Password or Pin for "NSS Certificate DB":
    Stop the Instance.
    On the DSCC Security -> Certificates tab:
         select option to "Do not Prompt for Password"
    Restart the instance.
    On the Security -> General tab, select the new certificate to use for ssl encryption
    Restart the instance
    Stop the instance
    Put DS back into smf control:
    dsadm enable-service <instance>
    Check the smf:
    svcs -a | grep ds
    # svcs -a|grep ds
    disabled Aug_16 svc:/application/sun/ds:default
    online Aug_16 svc:/application/sun/ds:ds--var-opt-SUNWdsee-dscc6-dcc-ads
    online 17:04:28 svc:/application/sun/ds:ds--var-opt-SUNWdsee-dsins1

  • 11.0.9 Use certificate for signing

    In version 11.0.8- we could use our MS Lync Certificate to sign documents with IntegriSign Desktop.  Now the option to use for signing is no longer showing.  I can see that something from MS Lync was addressed but not what actual done.
    3647309: MS Lync certificate appears in the sign dialog box
    Does this stop us from using the Lync certificate from signing a document?

    In Acrobat 11.0.9 there has been change the way Acrobat will search for digital certificates. All those certificates available for signing will be available for signing based on some key points in a certificate.
    Check 11.0.9 release notes thoroughly and you will find that was an issue: http://www.adobe.com/devnet-docs/acrobatetk/tools/ReleaseNotes/11/11.0.09.html#elevenzeroz eronine
    1   Getting Started — Digital Signatures Guide for IT
    Regards,
    Ajlan Huda.

  • ASA self-signed certificate for Anyconnect 3.1, which attributes?

    Hi everybody,
    I can't find the detailed information which attributes are exactly needed for the Anyconnect 3.1 client to correctly identify the VPN server -ASA 8.4(4)1
    I have added two servers in the client connection profile:
    IP address, primary protocol IPsec
    IP address/non-default port number, primary protocol SSL
    Connecting via IPsec only issues a warning about "untrusted source" (I didn't import the certificate as trusted, but that's not the issue)
    Connecting via SSL issues an additional warning "Certificate does not match the server name".
    The self-signed certificate (created with ASDM) includes the IP address as DN cn, additionally as alternate identity "IP address". I have exported the certificate and parsed it with openssl (after re-encoding to PKCS#12 DER) and apparently no attributes are included.
    I would like to give it a try with certtool and openssl to generate a self-signed certificate which is accepted by the Anconnect 3.1, where can I find a detailed description, which attributes are required for Anyconnect SSL sessions? I'm convinced the identity (DN cn) is OK.

    Shamelessly bumping this question,
    Anyone out there (maybe from Cisco) who can tell us, which atttributes are required on a self signed certificate?
    I keep getting "Certificate does not match the Server Name" for SSL-VPN, IPsec-VPN is fine for the same server.

  • My adobe acrobat 9 standard does not work recently for converting word documents to pdf - what up?

    why would adobe acrobat 9 standard stop working for converting word docs to pdf?

    Are you running at least version 9.2 of Acrobat? Are you able to log in with a new user account on Windows to see if it works?

  • CA-signed certificate for admin server

    hi,
    how can i make the admin-server use a CA signed certificate instead of self-signed? i only see an option to renew the self-signed certificates.

    okay, this is the method i used:
    webserver$ cd /var/opt/SUNWwbsvr7/admin-server/config
    # Save the CA certificate in cacert.crt, and import it into the database:
    webserver$ certutil -d . -A -n Example-Inc-CA -t CTu -a -i cacert.crt
    # Generate a new CSR on stdout:
    webserver$ certutil -R -d . -s 'CN=ws.example.org,O=Example, Inc.' -a -g 2048 -k rsa
    # Sign the CSR and save the certificate to 'newcert.crt', then import it:
    webserver$ certutil -d . -A -n cert-ws.example.org -t u -a -i newcert.cert
    webserver$ vi server.xml
    # Look for <server-cert-nickname>, and change it from 'Admin-Server-Cert' (the default)
    # to 'cert-ws.example.org'.
    webserver$ ../bin/stopserv
    webserver$ ../bin/startservreplace 'ws.example.org' with the hostname the admin server runs on.
    this seemed to work for me; after the restart, the admin server was using the new certificate, and the browser accepted it.

  • How to filter list of digital certificates for signing PDF

    Is it possible to change the configuration of Reader installation to filter the list of installed certificates that can be used for digitally signing documents?
    The filtered list will appear when users attempt to select a certificate for digitally signing a document.
    Thanks.

    Hi Carla,
    Unfortunately, Extended Key Usage is not one of the properties you can enforce.
    The things you can set are:
    appearanceFilter (i.e. enforce the use of a custom signature appearance)
    certspec(i.e. the signing certificate must meet some specific criteria)  <<<----- This is what you are more interested in, more below
    digestMethod(i.e. enforce the use of a specific cryptographic hashing algorithm)
    filter (i.e. enforce the use of a specific security handler if you want to use something other than the one built into Acrobat)
    legalAttestations (i.e. enforce the reason or purpose of the certifying signature)
    lockDocument (i.e. enforce any further changes to the document after the signature is applied)
    mdp (i.e. the rules for changing the document applied as part of a certifying signature)
    reasons (i.e. a list of one or more reasons the signer can use, as opposed to them adding their own)
    shouldAddRevInfo (i.e. force the inclusion on the revocation information (CRL or OCSP response) in the PDF file)
    subFilter (i.e. require the use of a specific signature format. This is very arcane)
    timeStampspec (i.e. require the use of a specific time stamp server)
    version (i.e the minimum version of Acrobat that can decipher the signature. the only two options are versions 6 or 8)
    The second item is the certspec, and this is what I've been pointing you towards. For the sake of discussion, think of everything you can read in a certificate as an extension. The serial number is an extension, the subject is an extension, the valid from date is an extension, etc. When a certificate is created, some of these extensions are required, other optional, and you can even add in extension that are not publicly defined, and only you will know about.
    Acrobat has the ability to enforce the signer to use a certificate that contains some, but not all of the known extensions. The extensions it can enforce are:
    issuer (i.e. require the use of a certificate that is issued by a specific Certificate Authority)
    keyUsage (i.e. require the signers certificate contain one or more of the nine possible values that can be included)
    oid (i.e. require that the Certificate Policy extension contain a specific value)
    subject (i.e. require that the document is signed by one specific person using one specific digital ID)
    subjectDN (i.e. require that the document is signed by one specific person, but they get to choose which digital ID to use)
    url (i.e. if a required digital ID is not available, where the signer can procure an acceptable digital ID)
    urlType (i.e. if the user is directed to the URL, should it be a web server where they can download a digital ID or a remote signing server where the digital ID stays on the remote server)
    That's it. If it's not one of these items then Acrobat cannot enforce that the item is available. Extended Key Usage is not on the list.
    Steve

  • Haven't received certificates for signing up for best buy credit card

    I had received an email on 2/20/14 stating that if I signed up for a best buy credit card before 3/19 and spent $500 I within 3 months, I would receive $50 in certificates. Called customer service and they can't find the promo. I received an email from randy and sent back a screen capture of the promo to the [email protected] email address. Haven't heard back from anyone.
    Can someone help resolve this matter?

    Good morning fatstooge,
    I am familiar with the promotion in-question, as we have offered it several times in the past.  To my knowledge, if you signed up for the My Best Buy™ MasterCard via the email you received and spent $500 within the first 90 days, then you should have qualified for a $50 certificate.  These bonus certificates, being the promotion is offered through Citibank, are usually added to all eligible members' accounts at once, which would take place about 2 to 3 months after the promotion ended.
    While looking through your account, I did notice that you have an open case with our Account Maintenance department.  I fully trust that they will be able to answer your questions; however, I am going to send you a private message to see if there is perhaps anything I can do to help.  You can check your private messages by logging into the forum and clicking on the yellow envelope icon located at the top of the page.
    Thank you for posting to the forum!
    Derek|Social Media Specialist | Best Buy® Corporate
     Private Message

  • Self Signed Certificate for Exchange 2013

     
    What's the draw back for using self sign certificate in production enviroment

    Hi,
    Based on my research, here are the disadvantages of self-signed certificate:
    1. The certificates aren’t trusted by other applications/operating systems. This may lead to authentications errors etc.
    Note: To overcome this limitation, some IT staff add the self-signed certificates to the Trusted Roots Certificate Authorities. However, using this workaround may to additional time that needed for management and troubleshooting.
    2. Self-signed certificates life time is usually 1 years. Before the year is ended, the certificate may need to renew/replace.
    3. Self-signed certificates may use low hash and cipher technologies. Due this, the security level that implemented by self-signed certificates may not satisfy the current Security Policy etc. .
    4. No support for advanced PKI (Public Key Infrastructure) functions (e.g. Online checking of the revocation list etc.).
    5. Most of the advanced feathers of the server side applications required to impended a PKI (Public Key Infrastructure). By this, self-signed certificates advantages cant be used.
    For more information, you can refer to the following article:
    http://blogs.microsoft.co.il/yuval14/2011/09/23/the-advantages-and-disadvantages-of-using-self-signed-certificates/
    Thanks,
    Angela Shi
    TechNet Community Support

  • Can't get Mail to recognize Thawte certificate for signing and encrypting

    I got a certificate from Thawte and double clicked on the p12 file. This installed the certificate in the login section of the Keychain. I read in several places that it must be in the X509Anchors chain in order to work. However, whenever I try to import it or copy it there I can't get past the authentication screen. I give it the password to decrypt the p12 file and that works, but then it asks for a password for the X509Anchors keychain. I'm giving it my login password, but that doesn't work. What am I doing wrong?

    You shouldn't have to do anything with the X509Anchors keychain. The X509Anchors keychain contains certificate authority (CA) certificates, i.e., certificates associated with CA's that sign certificates. In it you'll find various CA certificates for thawte among others.
    After you've successfully imported your thawte cert into your login chain, restart mail (I don't think you need to restart keychain access, but it wouldn't hurt).
    Now when you compose a message, you should see encrypt and sign buttons to the right and below the subject line. This of course assumes the email address configured in mail is the same as the one in the thawte certificate.

Maybe you are looking for

  • Question about using Apple Mail with Verizon

    Not sure if this is an Apple or Verizon question, but leaning toward the latter so here it is... On my MacBook Pro, running OS 10.8.3, I have several accounts. Each has its own Verizon username e.g. [email protected], [email protected] etc. Everythin

  • LR5, Canon 6D, Mac and WB issue!

    So I just upgraded to LR5 and I'm finding that my white balance is different in LR5 vs LR4.  I had the same problem when I updated to the latest version of 4 (so I had to reinstall 4.3 and all was well)  I figured it was a fluke and didn't think I'd

  • Can iPhone sync with outlook exchange

    Can iphone sync with Outlook Exchange for business?

  • TLF Is Now OpenSource

    In case you missed it: TLF is now OpenSource.  The sources are being delivered with Flex Gumbo Builds. Some handy links for getting more information: TLF OpenSource Home http://opensource.adobe.com/wiki/display/tlf/Text+Layout+Framework Announcments

  • Contact Sheet in Preview

    Cool feature, but is it not possible to include the file names when printing the contact sheet?