Adobe Acrobat gives an error message "The key file is missing, canceled"

Hi,
Adobe Acrobat gives an error message "The key file is missing, canceled" this is a direct translation of the Finnish error message. Acrobat is already re-installed. The operating system is Windows Server 2008 R2, and there is also installed Adobe Reader X.
BR
Heikki

Please let us know do you see this error on every launch of Acrobat?
Recommended is to have latest version of Acrobat and Reader. i.e. 10.1.8
Try updating application and then see if you still encounter the error.

Similar Messages

Exchange Connector 3.0 (Hotfix Release) Error - Error Message=The key value of an object cannot be changed.

Hello,
I am running Service Manager 2012 with the Exchange Connector 3.0 RTM (Re-release Version). The issue I have is that when an e-mail is processed that is trying to update the status or event log of an incident, the Exchange Connector encounters an error
and will not update the object. The Operations Manager log denotes:
Exchange Connector: Unable to process mail item. Subject="Close Ticket: [IRXXXXX]", Error Message=The key value of an object cannot be changed.
This will happen on a seemingly random selection of Incident work items. I cannot correlate them with a specific template, exchange connector, or incident tier queue that could be causing the issue. I can recreate the way a specific ticket
was created and update it through e-mail without issue, and the next ticket can cause the error to trigger.
I have already opened a Microsoft Support Case using our Software Assurance agreement. After a few months of troubleshooting the issue and trying different fixes, Microsoft support said they were unable to fix the problem and that we would need to
purchase Premier support to go further. At this point I thought I would reach out to the community for ideas.
The setup I have for the Exchange connectors is as follows.
I have three separate Exchange connectors set up to three different mailboxes. One Exchange connector processes external support tickets and applies a specific template. Another processes client support tickets and applies a different template.
And the last Exchange connector processes internal tickets and also processes the updates of tickets created by the other two exchange connectors.
Here are the fixes I've attempted so far:
1. Changed the templates that each Exchange connector applies.
2. Changed the management pack that each template is stored in.
3. Checked my management pack(s) for extended classes by searching for Extension="true" (This was also checked by Microsoft support)
4. Deleted each Exchange connector and recreated each connector
5. Deleted each Exchange connector, deleted the management pack, and reinstalled the management pack and connectors
6. Repeated Step 5, deleted Microsoft.SystemCenter.ExchangeConnector.dll and Microsoft.SystemCenter.ExchangeConnector.resources.dll and then installed the Exchange connector Re-release version 3.0 Published 10/7/2013 (which is supposed to address this
issue)
7. Deleted the HealthServiceState folder and restarted the Management Service
I'm not really sure what to do at this point. I've put many hours into customizing my installation to get it working for my organization so reformatting and starting from scratch would be a nightmare scenario. This environment is in production.
I do have a band-aid in place using Orchestrator. Basically I have a monitor task searching for the error message and when it finds one it searches the mailbox for the offending e-mail and applies either the Resolve or Close status change that is requested
from the user. However, I do not have it working to update the ticket if a comment is applied to the incident. If anyone is in this position and needs to know how to apply this Orchestrator task I am willing to provide my workflow.
I am new to the community and am already impressed with the amount of help and effort there is in this forum. I appreciate in advance any help that is provided and am open to any ideas at this point. I can post more information as needed.
Thank you,
John

Yes that is the whole template. However, I did confirm that this is only happening to incidents where either of two situations triggers a runbook to fire and modify the incident. When I remove the activity from the incident it does clear the
issue. For some background the first Runbook Activity set's the first response date when an incident is resolved if the first response value is null. The second assigns the incident to a user upon creation if the title contains assignto:username;
1.)
<ObjectTemplate ID="Template.d33b5bbcaf3c49b18d8b72bc1e5e1ee4" TypeID="IncidentManagement!System.WorkItem.Incident.ProjectionType">
<Property Path="$Context/Property[Type='CustomSystem_WorkItem_Incident_Library!System.WorkItem.Incident']/Escalated$">False</Property>
<Property Path="$Context/Property[Type='CustomSystem_WorkItem_Incident_Library!System.WorkItem.Incident']/NeedsKnowledgeArticle$">False</Property>
<Property Path="$Context/Property[Type='CustomSystem_WorkItem_Incident_Library!System.WorkItem.Incident']/HasCreatedKnowledgeArticle$">False</Property>
<Object Path="$Context/Path[Relationship='CustomSystem_WorkItem_Activity_Library!System.WorkItemContainsActivity' TypeConstraint='CustomMicrosoft_SystemCenter_Orchestrator!Microsoft.SystemCenter.Orchestrator.RunbookAutomationActivity']$">
<Property Path="$Context/Property[Type='CustomMicrosoft_SystemCenter_Orchestrator!Microsoft.SystemCenter.Orchestrator.RunbookAutomationActivity.Base']/RunbookId$">4085f0da-ab83-48e5-bbe3-1f3b5fa2dc4a</Property>
<Property Path="$Context/Property[Type='CustomMicrosoft_SystemCenter_Orchestrator!Microsoft.SystemCenter.Orchestrator.RunbookAutomationActivity.Base']/TemplateId$">Template.d33b5bbcaf3c49b18d8b72bc1e5e1ee4</Property>
<Property Path="$Context/Property[Type='CustomMicrosoft_SystemCenter_Orchestrator!Microsoft.SystemCenter.Orchestrator.RunbookAutomationActivity.Base']/IsReadyForAutomation$">True</Property>
<Property Path="$Context/Property[Type='CustomMicrosoft_SystemCenter_Orchestrator!Microsoft.SystemCenter.Orchestrator.RunbookAutomationActivity.Base']/PropertyMapping$"><?xml version="1.0" encoding="utf-16"?>
<ParameterMapping xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<ParameterList>
<RunbookParameterItem>
<Name>Get RA Guid</Name>
<Id>344b15effc1a44528e517c5b4227179c</Id>
<Type>String</Type>
<Value>Generic::Id</Value>
<Direction>In</Direction>
<ContextInfo />
</RunbookParameterItem>
</ParameterList>
<RunbookId>4085f0da-ab83-48e5-bbe3-1f3b5fa2dc4a</RunbookId>
</ParameterMapping></Property>
<Property Path="$Context/Property[Type='CustomSystem_WorkItem_Activity_Library!System.WorkItem.Activity']/ChildId$">1906</Property>
<Property Path="$Context/Property[Type='CustomSystem_WorkItem_Activity_Library!System.WorkItem.Activity']/Status$">$MPElement[Name='CustomSystem_WorkItem_Activity_Library!ActivityStatusEnum.Active']$</Property>
<Property Path="$Context/Property[Type='CustomSystem_WorkItem_Activity_Library!System.WorkItem.Activity']/Skip$">False</Property>
<Property Path="$Context/Property[Type='CustomSystem_WorkItem_Library!System.WorkItem']/Title$">Set First Response on Resolve</Property>
</Object>
</ObjectTemplate>
2.)
<ObjectTemplate ID="Template.b311e1f9126e4e19bbbbeb65ddb220ba" TypeID="IncidentManagement!System.WorkItem.Incident.ProjectionType">
<Property Path="$Context/Property[Type='CustomSystem_WorkItem_Incident_Library!System.WorkItem.Incident']/Escalated$">False</Property>
<Property Path="$Context/Property[Type='CustomSystem_WorkItem_Incident_Library!System.WorkItem.Incident']/Status$">$MPElement[Name='CustomSystem_WorkItem_Incident_Library!IncidentStatusEnum.Active']$</Property>
<Property Path="$Context/Property[Type='CustomSystem_WorkItem_Incident_Library!System.WorkItem.Incident']/NeedsKnowledgeArticle$">False</Property>
<Property Path="$Context/Property[Type='CustomSystem_WorkItem_Incident_Library!System.WorkItem.Incident']/HasCreatedKnowledgeArticle$">False</Property>
<Object Path="$Context/Path[Relationship='CustomSystem_WorkItem_Activity_Library!System.WorkItemContainsActivity' TypeConstraint='CustomMicrosoft_SystemCenter_Orchestrator!Microsoft.SystemCenter.Orchestrator.RunbookAutomationActivity']$">
<Property Path="$Context/Property[Type='CustomMicrosoft_SystemCenter_Orchestrator!Microsoft.SystemCenter.Orchestrator.RunbookAutomationActivity.Base']/RunbookId$">ca88b13b-861a-4d39-a3cb-fd912d951e35</Property>
<Property Path="$Context/Property[Type='CustomMicrosoft_SystemCenter_Orchestrator!Microsoft.SystemCenter.Orchestrator.RunbookAutomationActivity.Base']/TemplateId$">Template.b311e1f9126e4e19bbbbeb65ddb220ba</Property>
<Property Path="$Context/Property[Type='CustomMicrosoft_SystemCenter_Orchestrator!Microsoft.SystemCenter.Orchestrator.RunbookAutomationActivity.Base']/IsReadyForAutomation$">True</Property>
<Property Path="$Context/Property[Type='CustomMicrosoft_SystemCenter_Orchestrator!Microsoft.SystemCenter.Orchestrator.RunbookAutomationActivity.Base']/PropertyMapping$"><?xml version="1.0" encoding="utf-16"?>
<ParameterMapping xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<ParameterList>
<RunbookParameterItem>
<Name>RA Activity GUID</Name>
<Id>5677d117a0294a2c898a695032f26c72</Id>
<Type>String</Type>
<Value>Generic::Id</Value>
<Direction>In</Direction>
<ContextInfo />
</RunbookParameterItem>
</ParameterList>
<RunbookId>ca88b13b-861a-4d39-a3cb-fd912d951e35</RunbookId>
</ParameterMapping></Property>
<Property Path="$Context/Property[Type='CustomSystem_WorkItem_Activity_Library!System.WorkItem.Activity']/ChildId$">1120</Property>
<Property Path="$Context/Property[Type='CustomSystem_WorkItem_Activity_Library!System.WorkItem.Activity']/Status$">$MPElement[Name='CustomSystem_WorkItem_Activity_Library!ActivityStatusEnum.Active']$</Property>
<Property Path="$Context/Property[Type='CustomSystem_WorkItem_Activity_Library!System.WorkItem.Activity']/Skip$">False</Property>
<Property Path="$Context/Property[Type='WorkItem!System.WorkItem']/Title$">Execute Orchestrator IR - Autoassign</Property>
</Object>
</ObjectTemplate>

I cannot re-install Adobe Acrobat X Standard I have the Key and it is accepted - but the installation almost finishes and the stops and back out

I cannot re-install Adobe Acrobat X Standard I have the Key and it is accepted - but the installation almost finishes and the stops and back out
I have tried this several times
Please advise

uninstall any acrobat and reader installations, clean and then install - Download Adobe Reader and Acrobat Cleaner Tool - Adobe Labs

My apple RIP gives this error message" the application ppRIPe has unexpectedly quit"

MY APPLE RIP GIVES THIS ERROR MESSAGE" the application ppRIPe has unexpectedly quit"

Thanks.
I should have mentioned that I have already done the Resolving Permissions as outline on Apple Support pages, but, I went ahead and did the complete sequence as shown on Dr. Smokes.
I decided to stop beating a dead horse and did an Erase and Install of 10.2 again since I did not have anything on there yet. So far, everything is working perfectly. I am doing the Software Updates called for one by one to see if any of those caused the problem.
The only thing I did other than doing all of the updates after the install was to install OS 9.2 for my Classic Environment software and I also installed an HP PSC 1315v All-In-One scanner/printer. I cannot imagine that would have done anything.
I did have some strange issues with Where in the USA is Carmen Sandiego and The Star Fleet Technical manual so I may stay away from them unless I start in OS 9 if none of the other updates cause any issues.
Thanks. BTW, How should I rate your answer? I know that it did not solve my problem, but, it is likely that something else I did whacked something.
I'll update when I know more.

Unable to combine files on acrobat 8 getting error message "no PDF file was created beacuse Acrobat encountered an unidentified error"

unable to combine files on acrobat 8 getting error message "no PDF file was created beacuse Acrobat encountered an unidentified error" Please help

A lot of the time the files can not be combined because of incompatible fonts, or at least font sets that could not be resolved. Maybe that will give you some direction to look at.

Since downloading Yosmite on my MAC I have not been able to download photos to LR 5. Error message: "the following files were not imported because they could not be read (335).I have been working with several forums and have dtried going into preference

LR 5 - using it on a MAC-
Error message: "the following files were not imported because they could not be read (335).
I have been working with several forums and have tried all recommendations and none have worked.
I have tried reloading new LR 5 - and it worked for a short time and then stopped.
Very frustrated that I cannot talk with someone at Adobe.
The folks that have made recommendations are great but once their suggestions dont work they drop the link,
Is there someone or someplace I can take my computer to fix this issue.
It seems to be a problem between LR and Yosemite.

The permissions have been changed on the destination folder where the photos are to be copied into.
You must make sure that the permissions are set to Read and Write.
Or perhaps the destination folder has been changed accidentally to something else, and you need to change it back to whatever it used to be.

HT1848 I cannot authorize my computer, I'm having this error message The required file was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permissions cannot be changed." please hel

cannot authorize my computer, I'm having this error message The required file was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permissions cannot be changed." please help me

Doublechecking. In the course of your troubleshooting to date, have you worked through the instructions from the following document?
iTunes: Missing folder or incorrect permissions may prevent authorization

Error message: The selected file cannot be linked because it has 6 audio channel(s) and the clip was

I recently purchased/upgraded from Premiere Elements 5 to Premiere Elements 9 and I cannot open the projects in version 9 that were created with version 5. It shows it as offline. I get a message to open up a file and when I do i receive the error message: The selected file cannot be linked because it has 6 audio channel(s) and the clip was created with 2 audio channels. Can someone help me or tell what I am doing wrong? All of my projects that were completed in version 5 cannot be opened up in version 9.
Thank you.

Bill,
I ran G-Spot on one of the files and here it what I have:
DVD "VOB" format
MPEG-2 Program Stream << { 1 vid, 1 aud }
Sys Bitrate: 10080 kb/s VBR
I guess I am really confused. The project that I am trying to open PrE 9 was completed in PrE 3 w/templates , scenes, etc. The movie was burned to a DVD. I cannot understand why I cannot open it with a newer version of PrE. According to G-Spot (I am assuming this is what you mean above), it is already in 2 channels. To me this should be ok. I put many, many hours into these videos and now it seems all for not.
Here is what I did so far:
I uploaded the required media files to a new project in PrE9 and let them index and conform. I saved the project with the same name in a different location. Do I have to do this to the project files and/or the original media files? Confusion starts here.
The next step is where I am confused. I do not know if I am proceeding in the right direction from here. There is the share tab in the upper right hand corner. Is this what you are talking about? I am truly lost from here.
Thanks.

I get an error message "the following files were not imported because they could not be read (266)..

I get an error message "the following files were not imprted because they could not be read (266) on Lightroom 4 on my desktop.
No problems importing the files onto my laptop. Using a SANDISK card reader and card. What's going on on the desktop?

Leanne, check the write pernissions on the folder/drive you are attempting to import into on your desktop. The message usually means "cannot be written" - a not so clear message.

Problem when adding ascx user control in the MasterPage: Parser Error Message: The referenced file ... is not allowed on this page.

Hello,
I have to maintain a SharePoint 2010 project, in which a TopNavigation User Control for SiteCollection is registered in the MasterPage in this way:
<%@ Register TagPrefix="ABC" TagName="TopNavigation" src="~/_layouts/ABCApplication/MainSite/Navigation/TopNavigation.ascx" %>
<asp:ContentPlaceHolder id="PlaceHolderTopNavBar" runat="server">
<asp:ContentPlaceHolder id="PlaceHolderHorizontalNav" runat="server">
<ABC:TopNavigation ID="TopNavi" XMLDataLocation="/_layouts/ABCApplicatopm/MainSite/TopNavigation.xml" IsRoot="true"
runat="server" />
</asp:ContentPlaceHolder>
</asp:ContentPlaceHolder>
When I deploy the SiteCollection, the TopNavigation user control is working correctly. Unfortunately when i modify the masterpage over SharePoint Designer, the following error message comes allways, regardless of the art of changes i did in the MAsterPage
( even if I open the MasterPage, add an space and do save/close the MasterPage).
"Problem when adding user control in my custom master page, Parser Error Message: The referenced file '/_layouts/Navigation/TopNavigation.ascx' is not allowed on this page."
Any ideas?

Hi Simon,
When we use UserControl in SharePoint Page or MasterPage, and the UserControl is kept in any folder other than ControlTemplates, we will got the error. Here is an article about this issue and provided the solution:
http://sharepoint-tina.blogspot.com/2009/07/referenced-file-pathxyzascx-is-not.html
The solution can also be used in SharePoint 2010.
Qiao Wei
TechNet Community Support

I want to install the latest version of i tunes. I recieve an error that the MSI file is missing. It won't load the new version and I can not delete the software either. HELP!

I have a windows computer running xp. I can not load the latest version of I tunes. I receive an error message that the 'msi" file can not be found. I can not delete I tunes for the same reason.
HELP

ItIt is the the ituens msi file
From: Apple Support Communities Updates
[email protected]
Sent: Monday, February 27, 2012 3:40 PM
To: escow 39
Subject: - Re: I want to install the latest version of
i tunes. I recieve an error that the MSI file is missing. It won't load the
new version and I can not delete the software either. HELP!
<http://images.apple.com/support/images/emails/apple_logo_gray.gif>
<https://discussions.apple.com/index.jspa> Apple Support Communities
Re: I want to install the latest version of i tunes. I recieve an error that
the MSI file is missing. It won't load the new version and I can not delete
the software either. HELP!
created by b noir <https://discussions.apple.com/people/b+noir> in iTunes
for Windows - View the full discussion
<https://discussions.apple.com/message/17708214?ac_cid=142432#17708214

Adobe Acrobat X Pro - Error Message : "Adobe Acrobat Has Stopped Working"

I use Windows 7 - 64bit / CS6 Master Collection that has Adobe Acrobat x Pro.
When the computer is on for a little while, Acrobat would generate the error message that it has stopped working and then shuts down. Once that error message occurs, I cannot get Acrobat to stay open. It opens the PDF document, stays open for a few seconds then the error message occurs and it shuts down.
What helps for a short term is to restart the computer. This seems to temporarily remove the error until the computer is on for a while then the error returns.
This problem repeats. Product repair feature does not work. This has nothing to do with the license, I tried that fix and it made no differnce. I do not have this issue with other Adobe products included in the master collection.
It seems fruitless and frustrating to send a message to Adobe Support, the run around with pages and links is like smacking walls on every turn, it is obvious Adobe does not want people contacting their support. Service from Adobe for their products is poor.
I hope that someone here has the answer to the problem. Anyone?

Ok, here is the update.
The link: http://helpx.adobe.com/creative-suite/kb/acrobat-failed-launch-30-days.html , leads to a webpage that says to download a fix ZIP file named: "Acrofix.ZIP". It contains the file "acrofix.exe".
I did use this "exe" file about 2 months ago and it did nothing to fix the issue. I used it again today, because the same issue of "Adobe Acorbat has stopped working", occurred again and again it did not work, the problem of "Adobe Acrobat stopped working" presists. Again the only work around, which is temporary, is to reboot the computer.
So far these do not work:
Relicensing or Registering the Licence
Acrofix.exe
Anyone else have an answer? - or am I the only one suffering this really annoying issue?

Since uploading Maverick, my Microsoft apps give an error message "(the app) quit unexpectedly. Click Reopen to open the application again." However, this does nothing but renew this window. What to do?

Since uploading Maverick, all of my Microsoft apps give an error message "(name of the app) quit unexpectedly. Click Reopen to open the application again." However, this does nothing but renew this window. I have to click on the "OK" button to get rid of the error message. What to do?

Very Important, how much Free Space is on your Hard Drive first of all? Click on the Macintosh HD on the Desktop, then do a Get Info on it.
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
Do they launch OK while in Safe Mode?

HT201514 Time Machine gives following error message;- The backup disk image "/Volumes/Data/JOE OTOOLE's Computer.sparsebundle" is already in use. What does it mean?

My normally reliable Time Machine is giving following error message;-
The backup disk image “/Volumes/Data/JOE OTOOLE’s Computer.sparsebundle” is already in use.
What does it mean and how do I deal with it?

I have loaded it into ML using a great and free utility unpkg.. it probably works much the same as Pacifist.
Locate your downloaded 5.6 dmg file.. click it so you can see the pkg but don't bother opening it.
Download, install and run unpkg.
http://www.timdoug.com/unpkg/
Drag the airport utility 5.6 pkg over to unpkg.. and it will create a new directory on the desktop.. named AirPortUtility56.. drill down to Applications, Utilities and you will find the unpackaged utiity.. drag it to your main utilities directory or just run it where you are..

Need to down load Adobe Acrobat XI Standard not pro the key will not work

need to down load adobe acrobat X1 standard not pro the will not work

there is no acrobat standard trial.
you need your installation disk.

Adobe Acrobat gives an error message "The key file is missing, canceled"

Similar Messages

Maybe you are looking for