Adobe Color Themes Panel in PS CC. Does it show all your themes?

For some reason, my Color themes Panel in PS CC2014 does only show a certain amount of colour themes, and it is not resizable any further. There is also no scrolling available. Only half of my themes show up that way. I can bump them to my favourites and when synced again they show up in the favourite section, so they are synced … Anyone out there found a way to access all your themes from within the Panel/MyThemes?
thx,
J

For some reason, my Color themes Panel in PS CC2014 does only show a certain amount of colour themes, and it is not resizable any further. There is also no scrolling available. Only half of my themes show up that way. I can bump them to my favourites and when synced again they show up in the favourite section, so they are synced … Anyone out there found a way to access all your themes from within the Panel/MyThemes?
thx,
J

Similar Messages

  • I can't access Adobe Color Themes in Illustrator

    Hi,
    I've dowloaded the latest Illustrator from CC and when I click on Windows on the menu bar I don't see Extensions like I see in Photoshop. I can't access the Adobe Color Themes like I can in Photoshop. This same issue applies with InDesign. Do I need to reinstall Illustrator and InDesign?
    Thank you,
    Robert

    Kuler was the extension. It is now renamed to Color and not an extension anymore. You can access the Color themes from the Window menu or from the Swatches panel (click the little icon at the bottom of the panel).

  • How to use downloaded Adobe color theme (.ase) in Photoshop cc?

    How to use downloaded Adobe color theme (.ase) in Photoshop cc?

    I can confirm this functions but there is no indication it's been successful and the swatches appear in the Swatches panel, *not* in the Libraries panel where I would expect them.  My issue is that IMO this should not even be an issue, because a palette created on color.adobe.com should just show up in PS CC unless I'm not understanding the intended behavior.
    Anyone?

  • How can i add Adobe color theme?

    It says its suppose to be part of the initial setup, but I can't find it anywhere. Can someone please direct me to how i can download the themes?

    To get the Adobe Color Themes panel in InDesign CC 2014, you need to be updated to the October 2014 or February 2015 releases. The current version is 10.2.0.69 if you look under About InDesign.
    Once you're updated to the correct version of InDesign, choose Window > Color > Adobe Color Themes. The panel will connect to the Adobe Color website. Click My Themes to look at themes you've saved. Click on Actions > Add to Swatches panel to download the themes to InDesign.

  • Why do the colours from Adobe Color Theme creation change when I try to use them?

    I've been exploring the Adobe Color Theme creator in InDesign. There are the three tabs: Create, Explore, My Themes.  In the create tab I can create a theme of colours, get the combination just right, and then save my new theme.  However as soon as I save any colour out to the swatches, the colour changes! It's driving me nuts.
    [Original Colour]  -Colour it comes out as-
    [green turquoise] -prussian blue-
    [strong, bright red] -darkish orange-
    [warm purple] -faded dark mauve-
    My best guess was that maybe the colour profile of the document was set to CMYK and that the colour themes work in RGB, but as far as I can determine it's just "North America General Purpose 2" and the Working Spaces include both RGB and CMYK. Therefore I'm stumped. I do not have the expertise to figure out what is going on and these are significant colour changes to have a really strong, vibrant colour palette turn into something much more muted.
    And if this piece of information is of any use, my yellow doesn't seem to change at all.
    Any ideas please?  I've tried searching for it, but maybe I'm not putting in the right combination of keywords. Hopefully I'm just being obtuse and someone will tell me to put a checkmark in a box somewhere.

    There are some slight value changes between the Theme and the Swatches, but we're only talking a change of 1 or 2 and so the colours appear to stay true now. Total pain to have to do this extra little step every time. =)
    a huge, glaring, and sloppy problem which really ought to be fixed by Adobe pronto.
    You can batch change the color mode of swatches if you select all of the swatches and double click them. Or, you can simply leave the Lab values and let the conversion to the correct CMYK space happen when you export to PDF.
    I'm guessing the fix won't be coming soon. The original Kuler app had the same color management problem. It's hard to see how they will fix it and keep Color Themes as a cloud based web app.
    When you convert the Lab swatches the CMYK values you get will depend on the document's assigned profile, so if you make two document's with different profiles assigned you'll get different CMYK values when you convert the Lab values. Here is US SWOP vs US SNAP
    Newsprint
    SWOP

  • InDesign Adobe Color Themes only displays in Essentials Workplace

    I am probably missing something but I can't get Adobe Color Themes to display in anything but the Essentials workplace. Tried with a few eg Advanced plus my own custom workplaces.
    Is this (a) a deliberate restriction, (b) a bug, or (c) I have forgotten to perform some ritual or incantation?
    I am using Adobe InDesign CC 2014.2 on a Windows 7 64 bit platform.

    Try restoring your InDesign preferences:
    Trash, Replace, Reset, or Restore the application Preferences

  • Finder does not show all colors from selected color Labels

    Since a view days finder does not show all Color Label colors. When I select either yellow or green it is selected, but it does not show in the file list with details, I can see it in icon and 3 pane view, but not in the detail list view.
    does anybody know why or how? Or what plist files I might need to delete to get this reset?

    Create a new account, name it "test" and see how your labels work in that User acct in list view? (That will tell if your problem is systemwide or limited to your User acct.) This account is just for test, do nothing further with it.
    Open System Preferences >> Accounts >> "+" make it an admin account.
    Let us know and we'll troubleshoot this further.
    -mj
    [email protected]

  • Added or ediited texts by Bluebeam Revu,and has been saved,when I open it by the Adobe reader version 8.1,why it does not show my texts added by Revu?8.1 is my favorite version,I also tried it in a later version fo Reader,it doesn't work too!

    Added or ediited texts by Bluebeam Revu,and has been saved,when I open it by the Adobe reader version 8.1,why it does not show my texts added by Revu?8.1 is my favorite version,I also tried it in a later version fo Reader,it doesn't work too!

    Bernd Alheit wrote:
    Looks like a problem of Bluebeam Revu, not Adobe Reader.
    The response above is only a speculative answer to the original question. DSI-Hal, did you try to flatten the text in Bluebeam Revu prior to opening it in Adobe. This has worked for me on several different documents but not sure if we are using the same version of Adobe Reader.
    Give it a shot. Good luck.

  • My contact list does not show all my contacts.

    My contact list does not show all my contacts.  If I keypad a number not shown in the contacts it does know who that contact is.  What can I do to show all contacts?  I have 352 contacts in the phone.

    Do you have different Groups for contacts?  For example, perhaps you have some contacts stored on the device, some associated with a Yahoo account, and others associated with an Exchange account.  If you have multiple groups like this, tap the "Groups" button at the top-left corner in Contacts and see if you're looking at only a subset of your contacts.  There is an option to view "All Contacts", which summarizes them all for you.

  • Nokia E-5 music player does not show all songs. Th...

    my Nokia E-5 music player does not show all songs. The filemanager does though. have tried every damn thing that i could, from the internet. no solution yet. Nokia wont address it. any solutions? please dont ask me to refersh my music player. nokia now manufactures stupid phones, instead of smartphones..
    can any one help, friends? the last option i have to sell it off and wait for an HTC qwerty mango 7.5 phone

    I perfectly understand that this is frustrating and of course Nokia should adress this.
    I do not work for Nokia so maybe you could contact them. I see you have been to a care centre and reset it, but hopefully by contacting them by email they can log the issue for further work on firmwares?
    I hope this sorts out. Have you btw, tried with some other memory card?
    If it's not too much of a struggle, try backing up everything you have on it and format it, then reboot the phone which will recreate the needed folders and then drag and drop your stuff back to it and check again.
    Hope you get it solved mate!

  • The library module in 4.3 version does not show all the images

    The library module in the version 4.3 of Lightroom does not show all the images. They are marked with gray boxes instead of images. This is especially true of the images which I tried to import to Lightroom since I downloaded 4.3 a few weeks ago. If I want to seen an image, I have to go to the develop module to see it. What should I do?  Get this fixed now!!!!!!!!

    My bet would be on a corrupt preview folder.
    Your preview folder is located in the same folder as your catalog. It has the same name as your catalog with the word Previews.LRDATA at the end of the name. Rename this folder and let Lightroom rebuild the previews. Go to Library>Previews>Render Standard-sized Previews.  See if that fixes it.
    If it doesn't, you may want to have a look here: http://helpx.adobe.com/lightroom/kb/photos-appear-black-gray-rectangles.html

  • Invoice recipient drop-down does not show all company codes

    Hi SRM Gurus,
    The user has three company codes assigned as attributes in the Org structure.
    When creating a shopping cart, the company code drop-down shows the three company codes and the user is able to select one of them.
    However, when creating an invoice, the user is able to see only one of the company codes in the drop-down (the last one in the list of three company codes in the org structure), therefore, does not have the option of changing the comp code. This is an issue - am not able to find any  OSS notes to resolve the issue.
    Any help is highly appreciated and will be suitably rewarded.
    Thanks,
    Sai

    Still don't have an answer. I'm now looking to use a radio button or something to use as a work-around. If I use a lookup and tell it to allow multiple selections (shows as checkbox) it does not show all values in the mobile view.
    If I input each item and choose choice, it only shows up as dropdown. I need radio buttons. If I choose lookup and allow multiple selections, it does not show all the options.
    I need some help on this.
    Jef

  • Transaction MD04 does not show all open sales/orders deliverys

    Hi,
    Transaction MD04 does not show all open deliverys and sales orders for plant 0705 and certain materials.
    Can anyone tell me the reason for this?
    Regards,
    Brijesh

    Hi
    Run SDRQCR21 report in Transaction SE38 for that material it will  resolve your issue.
    Please confirm
    Amit

  • Analysis does not show all rows returned by SQL

    Hi.
    OBIEE 11.1.1.7.0
    I have a strange problem.  I have a simple table that should return customer number and sales.  The report will show all of the sales, but it does not show all the customer numbers.  The SQL that OBIEE creates does return all of the customer numbers.  When I remove the sales and just include the customer number, the report only shows a couple of the customer numbers (it should show several hundred).
    I guess what I'm looking for is any advice for how to debug this.  I have spent about 3 days on this problem, so I have tried to look at it from every angle (data, RPD, report).
    Any suggestions are appreciated.
    Thank you.

    Thank you for your reply.
    New development.  The issue has to do with a descriptor ID column.  The customer number column is a varchar field and I set the descriptor ID column to the column_ID field.  When I remove the descriptor ID setting, I received all custom numbers.

  • I recently updated my e-mail address with apple, but now it does not show all the "purchased" music that I purchased under my old e-mail address.  How can I re-gain access to those hundreds of purchased songs?

    I recently updated my e-mail address with apple, but now it does not show all the "purchased" music that I purchased under my old e-mail address.  How can I re-gain access to those hundreds of purchased songs?

    You are trying to find a loophole to circumvent a basic rule that prohibits the transfer of purchased content from one Apple ID to another.
    Content tied to an Apple ID are bound to that Apple ID forever. You can not merge or trade accounts. Well, not (officially) anyway...

Maybe you are looking for