Adobe InDesgin CS6 "The networks connection was lost for the file, name of file, or the file was modified by another process. Then the document just spins and spins until we force quit. Very frustrating. What can we do to fix this?

Running on Mac OS X 10.9.4 and InDesign CS6.

Are you opening a file from a file server? It sounds like you connection with the server was broken, or there is a problem with the server configuration.
When happens if you reboot, reopen InDesign, and open a file on your local hard drive?

Similar Messages

  • I just got an apple at&t iphone 4 and I have it unlocked. But I want to connect it to t-mobile, so I trimmed my sim card and once the phone was unlocked I inserted the sim and it says no sim, activation error. What can I do to fix this? What is wrong?

    I just got an apple at&t iphone 4 and I have it unlocked. But I want to connect it to t-mobile, so I trimmed my sim card and once the phone was unlocked I inserted the sim and it says no sim, activation error. What can I do to fix this? What is wrong?

    JayleneC wrote:
    Wait.. Everything on iTunes worked, but when I insert my sim it brings me to the start were I have to choose my language, etc... Then it says activation error.. Are you sure it's the sim card?
    As you addressed me that is exactly what I said
    Dodgy trimming ??   get a new micro sim from T-Mobile

  • After downloading iOs 6.1.2i was unable to play music aloud however im able to listen to it with my headphones in as well as my phone is still able to ring out loud what can i do to fix this? whats causing the problem?

    After downloading iOs 6.1.2 i was unable to play music aloud however im able to listen to it with my headphones in as well as my phone is still able to ring out loud what can i do to fix this? whats causing the problem?

    You need to continue with the Recovery...
    Once the Device is in Recovery Mode... it is too late to save anything...
    To minimise loss... After the successful Recovery... Restore from the most recent Backup...
    Restore from Backup
    http://support.apple.com/kb/ht1766

  • I keep getting a dialogue box asking me if i want to open or save a firefox document every time i click on an email in windows outlook; what can i do to fix this? thank you.

    Question
    i keep getting a dialogue box asking me if i want to open or save a firefox document every time i click on an email in windows outlook; what can i do to fix this? thank you

    Thanks for getting back to me; i was not able to get to the computer until now.
    No, not thru web access; it is via the Outlook provided thru Microsoft Office.

  • I imported a video and when I play it back, the audio does not match the video. When I view the tape in my camera it looks fine. I've tried imported twice and each time it doesn't match. What can I do to fix this?

    I imported a video and when I play it back, the audio does not match the video. When I view the tape in my camera it looks fine. I've tried imported twice and each time it doesn't match. What can I do to fix this?

    The default settings mostly likely use an audio sample rate of 32k. This doesn't work probably in FCP. You're probably better off capturing the tape in iMovie.

  • HT3964 I did the SMC reset for my iMac intel-based and now it won't turn on. What can I do to fix this?

    I did the SMC reset for my iMac intel-based and now it won't turn on. What can I do to fix this?

    Well, first things first... is the power cord fully plugged into the back of the iMac (and the wall, for that matter)?
    Make sure the wall outlet has power, too... I've scratched my head over stupid issues where I forgot to flip a wall switch.
    If the outlet does have power, then try doing a pram zap. Command + option + P + R (hold those at startup).
    If the machine is receiving power, you should be able to see some LEDs if you look through the bottom grate of the machine to the left of the RAM door.

  • After installing the latest itunes/quicktime update, I can no longer access the itunes store and my iphone does not complete syncing. What can I do to fix this?

    After installing the latest itunes/quicktime update I can no longer acces the itunes store nad my iphone does not complete syncing. What can I do to fix this?  I have tried uninstalling and reinstalling itunes.  I have uninstalled and reinstalled windows updates. I have checked the firewall settings. what else?

    The problem is with version 10.4.1.  I had to reload 10.3 to get it to work.  The recommendation from a previous poster worked for me.  Here was their list of steps:
    Go to Control Panel>Programs>Uninstall
    2.  Uninstall the following Apple programs in the following order:
         a. iTunes
         b. QuickTime
         c. Apple Software Update
         d. Apple Mobile Devices Support
         e. Bonjour
         f.  Apple Appllcation Support
    3.  Reboot PC
    4.  Find, Download and Install iTunes 10.3 (you can find it at FileHippo.com)
    If you start iTunes now you will get an error message saying that the current iTunes library was created by a newer version of iTunes.  To correct this:
    5.  Go to your Music>iTunes folder and delete the "iTunes Library.itl" database file
    6.  Within this iTunes folder find and open the "Previous iTunes Libraries" folder and locate the most recently dated "iTunes Library (date).itl" database file.
    7.  Copy and Paste this file back into the iTunes folder
    8.  Rename this "iTunes Library (date).itl" file by removing the date.  It should say "iTunes Library.itl"
    9.  Reboot PC

  • Colorsync Utility. Whenever I click on Devices or Filters, it hangs and I have to force quit. Any ideas as to how to fix this?

    I'm having an issue with Colorsync Utility. When I open the utility I can access Profile First Aid, Profiles and the Calculator but whenever I click on Devices or Filters, it hangs and I have to force quit. I recently re-profiled my NEC monitor using xRite i1Profiler Pro and saved the ICC profile as "version 4". When I went to use the Nik's ColorEfex Pro 4 plug-in, in Adobe Photodhop CS5.1 (Creative Suite 5.5), I got a cyan cast across all my images. Nik said it had to do with a corrupt ICC profile but when I ran Profile First Aid, the only profile that came up as needing repair ( and couldn't) was EW-sRGB. I reprofiled the monitor only this time I saved it as "version 2", and the plug-in worked fine. What surprises me is that Colorsync Utilty always used to work without issue, and I never seemed to have a problem creatinga and saving ICC profiles using version 4. Any ideas as to what is causing this problem and  how to fix this?
    Thanks.
    James

    I updated my software, and deleted my history/cache.  Also, when I try to use Preview, it says that it was forced to quit while restoring windows, so when I click restore windows nothing happens.  I can't view anything either.  The only thing I can think that may have caused these problems is I tried to shut down and had to force it to by holding the power button.  I rarely shut it off.

  • I just downloaded itunes 10.5 and my i pod no longer syncs with itunes, and i don't have ios 5 yet, what can i do to fix this problem?

    Like i said i can't sync my i pod with i tunes and i want to fix this. I tried uninstalling and redownloading itunes 10.5 but it still doesn't work. I tried another i pod and it didn't connect to i tunes either.     Can someone help, please?

    Need more details. What is your appstore error exactly? and what happens when you try to use Safari?

  • I bought my iMac about 2 1/2 years ago and now it's becoming increasingly slow. What can I do to fix this problem?

    For the last couple of months I've noticed that my iMac has become really slow and sometimes freezes. I've always updated all my Programs and only use apple stuff. No shady software. I'm just trying to figure out if there's something that I can do as far as maintenance, etc to fix this

    See the following:
    Kappy's Personal Suggestions for OS X Maintenance
    For disk repairs use Disk Utility.  For situations DU cannot handle the best third-party utilities are: Disk Warrior;  DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.x is now Intel Mac compatible. TechTool Pro provides additional repair options including file repair and recovery, system diagnostics, and disk defragmentation.  TechTool Pro 4.5.1 or higher are Intel Mac compatible;  Drive Genius is similar to TechTool Pro in terms of the various repair services provided.  Versions 1.5.1 or later are Intel Mac compatible.
    OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep.  Dependence upon third-party utilities to run the periodic maintenance scripts had been significantly reduced in Tiger and Leopard.  These utilities have limited or no functionality with Snow Leopard and should not be installed.
    OS X automatically defragments files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive. As for virus protection there are few if any such animals affecting OS X. You can protect the computer easily using the freeware Open Source virus protection software ClamXAV. Personally I would avoid most commercial anti-virus software because of their potential for causing problems.
    I would also recommend downloading the shareware utility TinkerTool System that you can use for periodic maintenance such as removing old logfiles and archives, clearing caches, etc.  Other utilities are also available such as Onyx, Leopard Cache Cleaner, CockTail, and Xupport, for example.
    For emergency repairs install the freeware utility Applejack.  If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the commandline.  Note that AppleJack 1.5 is required for Leopard. AppleJack 1.6 is compatible with Snow Leopard.
    When you install any new system software or updates be sure to repair the hard drive and permissions beforehand. I also recommend booting into safe mode before doing system software updates.
    Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
    Backuplist
    Carbon Copy Cloner
    Data Backup
    Deja Vu
    iBackup
    JaBack
    Silver Keeper
    MimMac
    Retrospect
    Super Flexible File Synchronizer
    SuperDuper!
    Synchronize Pro! X
    SyncTwoFolders
    Synk Pro
    Synk Standard
    Tri-Backup
    Visit The XLab FAQs and read the FAQs on maintenance, optimization, virus protection, and backup and restore.
    Additional suggestions will be found in Mac Maintenance Quick Assist.
    Referenced software can be found at CNet Downloads or MacUpdate.

  • The "Latest Headlines" on my Bookmark Bar are a month old and won't update to current stories. What can I do to fix this. I haven't changed any settings.

    Firefox 3.6.28 For MacBook Pro 10.4.11
    I've haven't had a problem with the News stories updating to current stories until now. NOT very Techie.

    Well, first off, you are running a very ancient version of Mac OS, you should update to at least 10.5, preferably 10.6 if your computer can support it. This shouldn't cost you all that much money. It will probably at most cost you about $40 to fully update your computer (https://discussions.apple.com/thread/4517588?tstart=0). the benefits of upgrading are numerous, but mainly will provide you increased security, performance and stability. Right now your computer is not safe to use online.
    After you update, update Firefox [[Update Firefox to the latest version]] and your plugins (https://www.mozilla.org/en-US/plugincheck/)
    Note, this won't work until you update Mac OS X

  • I am trying to view videos and I keep getting blocked plugin signs. What can I do to fix this problem.

    I am unable to view videos. I keep getting blocked plugin signs. How can I fix this problem?

    What if the latest plugin is the problem? I installed the latest version and now it does not work.

  • Hello ! I'm using iphone 5 running ios 7.1.1 I have problem with Appstore error and also Safari don't work too. What can I do to fix this problem ?

    Hello ! I'm using iphone 5 running ios 7.1.1 and I have problem with appstore error and also Safari doesn't work. what can do I fix this problem ? I need help now my iphone can't do nothing

    Need more details. What is your appstore error exactly? and what happens when you try to use Safari?

  • When I try to read my e-mail my iPad closes the page and sends me back to home page. What can I do to fix this?

    When I try to read my e-mail my iPad closes the page and sends me back to home page. Any ideas how I can fix this?

    Jonmarie-
    Try resetting (rebooting) the iPad.  Hold both the Home and Sleep buttons for several seconds until the Apple logo appears.  Ignore the "Slide to power off" arrow.  The iPad will restart after a couple of minutes.  Resetting this way will not hurt anything and sometimes solves mysterious problems.
    Fred

  • When trying to restore my iPhone 4 on iTunes, an error (2001 and 2006) pops up and prevents me from restoring my phone.  What can I do to fix this problem?

    I have updated my itunes and computer software, as well as held down both the lock and home buttons on my iphone.  I have contacted my carrier tech support and apple tech support but nothing has worked thus far.

    Also look here.
    http://support.apple.com/kb/TS3694#error2001

  • Downloaded IOS 7 and now I do not have a dictionary in iBook.  This is very frustrating.  What can be done to fix this issue?

    Downloaded IOS 7 and now I do not have a dictionary in iBook.  This is very frustrating.  What can be done to fix this issue?

    I've got to agree with Allan. It sounds like the hard drive is corrupt at least. It's possible it might be physically failing. Without backups, it's possible your data is already gone. You need a professional to help you.
    If you do not have an Apple Store near you or simply don't have the time to spare, there are some things you can try, but you must understand that it's possible these things could make the chances of recovering your data worse than they already are. Perform the instructions to follow at your own risk!
    First, you can try repairing your hard drive with Disk Utility. If that works, see if you can start up the machine. If you can, the very first thing you need to do is back up any data you don't want to lose. You may still need to take other steps, as your system may be damaged as well, but getting the data is the important part.
    If Disk Utility cannot repair the problems, you can try DiskWarrior. It can repair problems that Disk Utility cannot. However, it also increases the risk of destroying your data if it fails. If it works and you can start up the machine, do the same as I advised for following success with Disk Utility.
    If repairs (with either) were successful, but the machine still won't start up, you can try reinstalling the system. Hold down command-R at startup and then just install right on top of the existing system. If all goes well, you'll be able to start up afterwards and can get your data backed up. If all goes badly, it'll further decrease the chances of getting your data back.
    If neither can repair the damage, you're in bad shape. You will need a professional to help you, unless you are willing to lose all your data.

Maybe you are looking for

  • Code not getting executed:

    The requirement if comm+salary is >=3000 then all the details laong with emp info have to be inserted into emp table and comm+sal between 10000 and 20000 the same have to be inserted into emp table. PLZ CHECKOUT AND SPECIFIY THE RIGHT CODE TO DO IT.

  • Asm 11.1.0.6 root.sh  fails to start css

    We have Oracle ASM and installing 11.1.0.6 on a new machine (eventually will apply 11.1.0.7 patchset). So we are on 11g R1 in production environments. When installing Oracle ASM 11.1.0.6, the root.sh fails I checked various metalink notes, all settin

  • Website Background Video

    Hi I have seen a few websites that have video's as there backgrounds. Some of them are very impressive. How can I do that with my website. If I purchase the video what format should I purchase and how could I put this on my site?

  • Nokia C7 Phone Start-Up Failed

    A good friend of mine has a Nokia C7.  He and I both used to use SPB Mobile Shell, but I no longer do.  However, my friend is still using the SPB software. Sometimes when my friend turns on his phone, the usual Nokia information appears, then the "lo

  • Error while running PB40 - initial data entry action

    Hi Friends, I am running PB40 initial data entry action. The values that I am giving in the Personnel Officer field are not getting accepted. Its giving me error : *Entry does not exist in T526 (check entry)* I have checked T526 table in SE16 and its