Adobe Widgets -Function module not displaying data in flex

Hello All,
I am using a function module to obtain the data of the tables parameter. When i run in the adobe flex its not displaying the table data. I have written even the code also in the adobe flex.
I have set all the configurations and even set the RFC also.
Can anybody help me out in this issue.
I will reward you with points.
Thanks,

hi karan,
I hope that you are using the REST service from the sap widget foundation.
what type of error it displays?
code :
<mx:HTTPService id="sapService"
url="http://localhost:7531/SapMiddleTier/REST/ewcs/service/rfct" method="POST"/>
reference :
Adobe widget :(which is created using adobe flex,also the relevant article attached)
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e00ca8a3-51aa-2a10-fdaf-97858e6acd12
thanks
jaideep
Edited by: Abesh Bhattacharjee on Feb 28, 2008 12:31 PM
Please do not ask for points. You will get them if you deserve them !

Similar Messages

Standard Remote-Enabled Function Module to display data.

Good afternoon,
Is there any Standard Remote-Enabled Function Module which can be used to display a list of material, supplier or stocks data?
First time, I was trying to use FM link to BW Extractor as MDEX_MATERIAL_MD for Material Attributes, but these kind of FM are not Remote-Enabled and not released.
My second solution is to find a Standard Remote-Enabled Function Module which can be used to display a list of material, supplier or stocks data, but I haven't it yet.
May someone help me in this?
Thanks in advance for your answers.
Best regards,
Paul d'ORIGNY

Hi,
Suppose you want to read data from the vbrk table in ECC through a function module, then you can define the function module as "remote-enabled"(attribute tab in se37-processing type). You can try the following code out:
FUNCTION Z_EM_INVOICE.
*""Local Interface:*
*" IMPORTING
*" VALUE(I_FKDAT) TYPE FKDAT OPTIONAL
*" TABLES
*" E_VBRK STRUCTURE VBRK
*select * from vbrk into table*
e_vbrk where fkdat = i_fkdat.
ENDFUNCTION.
From BI you can call the function odule as follows:Supposing that you are calling the function module in the start routine of a dso:
data : v_dest_system TYPE char255.
data: l_vbrk type table of vbrk.
v_dest_system = 'DRDCLNT010'
CALL FUNCTION 'Z_EM_INVOICE''
destination v_dest_system
EXPORTING
i_fkdat = <passing variable>
e_vbrk = l_vbrk.
Regards,
Anjana.

Service call to function module not fetching data

Hello Experts,
Today, I have started facing one more weird issue of the similar kind, I faced few weeks back.
Once my web dynpro application is loaded, on the click of button I make a service call to function module which brings me some data and that is being shown on the UI.
After doing few more service calls on the click of other buttons, when I click on the button initially clicked, service call is being made but no data is being returned.
I already debugged the code, made sure the parameters is being passed correctly to function module.
Regards,
Harsh

Hello Katrice,
I debugged to the hilt and found that standard function module 'ME_REL_ACTIVE' was returning sy-subrc non zero.
I cleared one variable after identifying it. Below is the code snippet:
    ld_read_t16fg = '(SAPLEBNF)READ_T16FG'.
    ASSIGN (ld_read_t16fg) TO <lst_read_t16fg>.
    IF <lst_read_t16fg> IS ASSIGNED AND <lst_read_t16fg> IS NOT INITIAL.
      CLEAR <lst_read_t16fg>.
    ENDIF.
    UNASSIGN <lst_read_t16fg>.
Regards,
Harsh

Function module to display the time and date in the report-sy-udate And s

Hi.
wish to have a function module which can display the system time and date through function module.
the format that this function module should display should be like this:
if its today-date and time then:
05-Jan-08 01.25.57 PM
please note that i want them to be in one single row in the top-of page
kinldy help on this.
thanks!

hi,
check this.
https://forums.sdn.sap.com/click.jspa?searchID=19175181&messageID=4628668
Thanks

Error Function module " " not found in Smartforms

Hi all,
Please help me out.
I created the form using the smartforms, check it and activated it. I can see the unique function module is assigned to the form. I wrote the ABAP program and use function module SSF_FUNCTION_MODULE_NAMEand also define data types.
when I called the function module fm_name for passing values and tables from program to smartform. This is working perfectly in development server but in production it giving error like Function module " " not found.
Below I m pasting my code.
*& Report ZCASHJOURNAL                                                *
REPORT zcashjournal                            .
TABLES: bseg.
DATA: FM_NAME TYPE rs38l_fnam.
DATA:BEGIN OF it_bseg OCCURS 0.
        INCLUDE STRUCTURE bseg.
DATA:END OF it_bseg.
DATA:BEGIN OF it_bseg1 OCCURS 0.
        INCLUDE STRUCTURE bseg.
DATA:END OF it_bseg1.
DATA: gv_amt_in_words TYPE spell,
      gv_word TYPE spell-word,
      gv_decword TYPE spell-decword.
DATA:BEGIN OF gt_bkpf OCCURS 0.
        INCLUDE STRUCTURE bkpf.
DATA:END OF gt_bkpf.
DATA:bktxt TYPE bktxt.
DATA:waers TYPE waers.
DATA:belnr TYPE belnr_d.
DATA:werks TYPE bukrs.
DATA:desc TYPE butxt.
DATA:awkey TYPE awkey.
DATA:docno TYPE matnr.
DATA:cajo TYPE awkey.
DATA:desc1 TYPE butxt.
DATA:dmbtr TYPE dmbtr.
SELECTION-SCREEN BEGIN OF BLOCK b2.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT (15) FOR FIELD s_belnr.
SELECTION-SCREEN POSITION 28 .
PARAMETERS : s_belnr TYPE bseg-belnr .
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT (15) FOR FIELD s_werks.
    SELECTION-SCREEN POSITION 28 .
      PARAMETERS: s_werks TYPE werks.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK b2.
SELECT * FROM bkpf
           INTO CORRESPONDING FIELDS OF TABLE gt_bkpf
          WHERE belnr LIKE s_belnr
          AND   bukrs LIKE s_werks.
IF NOT gt_bkpf[] IS INITIAL.
SELECT * FROM bseg
      INTO CORRESPONDING FIELDS OF TABLE it_bseg
      FOR ALL ENTRIES IN gt_bkpf
      WHERE bukrs EQ gt_bkpf-bukrs
      AND   belnr EQ gt_bkpf-belnr
      AND   shkzg EQ 'S'.
ENDIF.
LOOP AT gt_bkpf.
bktxt = gt_bkpf-bktxt.
waers = gt_bkpf-waers.
belnr = gt_bkpf-belnr.
werks = gt_bkpf-bukrs.
awkey = gt_bkpf-awkey.
docno = awkey+0(10).
cajo = awkey+10(4).
ENDLOOP.
LOOP AT it_bseg.
dmbtr = it_bseg-dmbtr.
ENDLOOP.
IF s_werks EQ '65'.
desc = 'JCBML - Heavy Equipments'.
ENDIF.
IF cajo EQ '0001'.
desc1 = 'PETTY CASH PLANT II'.
ENDIF.
CALL FUNCTION 'SPELL_AMOUNT'
EXPORTING
    amount    = dmbtr
    currency = waers
    filler    = space
    language = sy-langu
IMPORTING
    in_words = gv_amt_in_words
EXCEPTIONS
    not_found = 1
    too_large = 2
    OTHERS    = 3.
IF sy-subrc EQ 0.
MOVE : gv_amt_in_words-word TO gv_word,
         gv_amt_in_words-decword TO gv_decword.
ENDIF.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
    formname                 = 'ZCASHRECPT'
IMPORTING
   FM_NAME                  = FM_NAME
EXCEPTIONS
   NO_FORM                  = 1
   NO_FUNCTION_MODULE       = 2
   OTHERS                   = 3
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
        EXPORTING formname           = 'ZCASHRECPT'
                variant            = ' '
                direct_call        = ' '
        IMPORTING fm_name            = lf_fm_name
        EXCEPTIONS no_form            = 1
                   no_function_module = 2.
*v_vbeln = S_VBELN-low.
CALL FUNCTION FM_NAME
EXPORTING
    bktxt            = bktxt
    waers            = waers
    belnr            = belnr
    werks            = werks
    desc             = desc
    docno            = docno
    cajo             = cajo
    desc1            = desc1
    dmbtr            = dmbtr
    gv_word          = gv_word
TABLES
    T_ZDEB           = it_bseg
EXCEPTIONS
    formatting_error = 1
    internal_error   = 2
    send_error       = 3
    user_canceled    = 4
    OTHERS           = 5.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.

Hi Rakesh,
Check two things
1. Program tranpsorted to production without any error in request log.
2. Smartform tranpsorted to production without any error in request log and without renaming / misspelling it.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
formname = 'ZCASHRECPT'
IMPORTING
FM_NAME = FM_NAME
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Also try to uncomment the Message id part and it will show some meaningful message.
And to check whether actaually fucntion module is generated or not goto smartforms ->Smartform name -> Display -> Environment->Fucntion module name . if this is blank try to retransport smartform.
Hope that helps.
Regards
Kapadia
***Assigning points is the way to say thanks in SDN.***

Function modules to display graph in a container

Hi,
   Can anyone suggest me is there any other function module to display graph in a container other than "GFW_PRES_SHOW_MULT" why because when I am displaying the graph using that function module I am getting boxes in the graph display which is not needed so please send me other function module or tell me whether there is any way to remove the boxes in the graph at the time of display by using the same function module given above.
Thanks in Advance.
Bhushanam.

Hi,
To add a graphics functionality to ALV Grid;
1. Add a user button on the ALV Grid control, utilizing "toolbar" event and "set_toolbar_interactive" methods of the class "cl_gui_alv_grid".
2. As the function of this button, your routine should use GFW objects or "GRAPH_MATRIX..." function modules to display your graph. You implement your routine at the event "user_command".
Additionaly, you can have a look at this
SAP Graphics Help
http://help.sap.com/saphelp_46c/helpdata/en/a1/d9883672d57c73e10000009b38f889/frameset.htm
data: begin of i_tab occurs 0,
       name(5) type c,
       value   type p,
      end of i_tab.
i_tab-name = 'SAP'.
i_tab-value = '40'.
append i_tab.
clear i_tab.
i_tab-name = 'MSN'.
i_tab-value = '30'.
append i_tab.
clear i_tab.
i_tab-name = 'CNN'.
i_tab-value = '27'.
append i_tab.
clear i_tab.
i_tab-name = 'ABC'.
i_tab-value = '56'.
append i_tab.
clear i_tab.
call function 'GRAPH_2D'
EXPORTING
    TYPE                     = 'PI'
    TITL                     = 'My Graph'
tables
    data                     = i_tab
EXCEPTIONS
   GUI_REFUSE_GRAPHIC       = 1
   OTHERS                   = 2
if sy-subrc <> 0.
endif.
Also,Check the fun modules
GRAPH_2D Calling up the 2D business graphics
GRAPH_2D_MENUE DO NOT USE (use 'GRAPH_2D' and 'GRAPH_BUSG_MENU_SET')
GRAPH_3D Calling up the 3D presentation graphics
GRAPH_BUSG_COLOR_SET Definition of color pallets for business graphics
GRAPH_BUSG_MENU_SET Pushbutton menu (tool bar) for all BUSG modules
GRAPH_MATRIX Calling up SAP Business Graphics (2D, 3D and 4D)
GRAPH_MATRIX_2D Calling up the 2D graphics (user-friendly version)
GRAPH_MATRIX_3D Structure of 3D graphics (user-friendly version)
GRAPH_MATRIX_4D Calling up a 3D graphic (4th dimension stacked representation)
Regards,
Padmam.

Report does not display data

I have a crystal XI report that when run will not display data; if the report should be six pages that is the number of pages that will be generated. The problem is that the pages show up as blank. If the blank pages are exported the exported file will contain data, if the report is sent to a printer the report will contain data, but no data is ever displayed on the screen. This report has been loaded on 15 other computer and runs perfectly. Any help would be greatly appreciated. By the way if this user logs in remotely and runs this report it will display data.

A few ideas;
1) Make sure you are working with [SP 6|https://smpdl.sap-ag.de/~sapidp/012002523100015859952009E/crxir2win_sp6.exe].
You are on SP 2...
[SP6 msm|https://smpdl.sap-ag.de/~sapidp/012002523100000634032010E/crxir2sp6_rdc_mm.zip]
2) Try different resolutions
3) Try to see if there is an updated video driver
4) Make sure there is a default printer driver installed.
5) Run [Modules|https://smpdl.sap-ag.de/~sapidp/012002523100006252802008E/modules.zip] see if there are any differences in dlls loading on a box that works and the one that does not (CR and non CR dlls).
Ludek
Edited by: Ludek Uher on Feb 22, 2010 10:32 AM

Function Module not extracting records when InfoPackaged is executed

Hi,
I'm using a Function module for extracting data. The DataSource is working fine in RSA3 with a selection criteria. But when i schedule the infopackage with the same selections in the data selection tab, Its not getting me any records into BW. In the Details Tab i get the message "Error occurred in the data selection" . I guess there is a problem with the data selection. Pasted below is the code i'm using for extraction. Can anyone please let me know if there is any issue with the code.
Also how do we pass on the value of I_MAXSIZE into the function module, the remaining parameters get the values from BW. And can anyone please explain me the concept of the "s_counter_datapakid" and when it should be incremented and where it should be located in the code?
Thanks,
AM
Auxiliary Selection criteria structure
DATA: l_s_select TYPE srsc_s_select.
Maximum number of lines for DB table
STATICS: s_s_if TYPE srsc_s_if_simple,
counter
          s_counter_datapakid LIKE sy-tabix,
cursor
          s_cursor TYPE cursor.
Initialization mode (first call by SAPI) or data transfer mode
(following calls) ?
IF i_initflag = sbiwa_c_flag_on.
Initialization: check input parameters
                buffer input parameters
                prepare data selection
Check DataSource validity
    CASE i_dsource.
      WHEN 'XXXXX'.
      WHEN OTHERS.
this is a typical log call. Please write every error message like this
        log_write 'E'                  "message type
                  'R3'                 "message class
                  '009'                "message number
                  i_dsource   "message variable 1
                  ' '.                 "message variable 2
        RAISE error_passed_to_mess_handler.
    ENDCASE.
    APPEND LINES OF i_t_select TO s_s_if-t_select.
Fill parameter buffer for data extraction calls
    s_s_if-requnr    = i_requnr.
    s_s_if-dsource = i_dsource.
    s_s_if-maxsize   = i_maxsize.
Fill field list table for an optimized select statement
(in case that there is no 1:1 relation between InfoSource fields
and database table fields this may be far from beeing trivial)
    APPEND LINES OF i_t_fields TO s_s_if-t_fields.
ELSE.
Data transfer: First Call      OPEN CURSOR + FETCH
               Following Calls FETCH only
First data package -> OPEN CURSOR
    IF s_counter_datapakid = 0.
      g_first = 'X'.
Fill range tables BW will only pass down simple selection criteria
of the type SIGN = 'I' and OPTION = 'EQ' or OPTION = 'BT'.
      LOOP AT s_s_if-t_select INTO l_s_select WHERE fieldnm = 'BWLVS'.
        IF l_s_select-low <> '101' AND
           l_s_select-low <> '109'.
          RAISE invalid_movement_type.
        ELSE.
          MOVE-CORRESPONDING l_s_select TO r_im_bwlvs.
          APPEND r_im_bwlvs.
        ENDIF.
      ENDLOOP.
      LOOP AT s_s_if-t_select INTO l_s_select WHERE fieldnm = 'BEGDA'.
        MOVE-CORRESPONDING l_s_select TO r_im_begda.
        r_im_begda-low0(4) = l_s_select-low6(4).
        r_im_begda-low4(2) = l_s_select-low0(2).
        r_im_begda-low6(2) = l_s_select-low3(2).
        APPEND r_im_begda.
      ENDLOOP.
      LOOP AT s_s_if-t_select INTO l_s_select WHERE fieldnm = 'ENDDA'.
        MOVE-CORRESPONDING l_s_select TO r_im_endda.
        r_im_endda-low0(4) = l_s_select-low6(4).
        r_im_endda-low4(2) = l_s_select-low0(2).
        r_im_endda-low6(2) = l_s_select-low3(2).
        APPEND r_im_endda.
      ENDLOOP.
*Select from table ltak into internal table i_ltak the following fields.
*Condition: where bwlvs = import bwlvs & endat is >= import begda and
<= import endda.
      READ TABLE r_im_begda INDEX 1.
      IF sy-subrc NE 0.
        RAISE blank_date_invalid.
      ELSE.
        IF r_im_begda-low IS INITIAL.
          RAISE blank_date_invalid.
        ENDIF.
      ENDIF.
      READ TABLE r_im_endda INDEX 1.
      IF sy-subrc NE 0.
        RAISE blank_date_invalid.
      ELSE.
        IF r_im_endda-low IS INITIAL.
          RAISE blank_date_invalid.
        ENDIF.
      ENDIF.
      IF NOT r_im_endda-low IS INITIAL
        AND r_im_begda-low > r_im_endda-low.
        RAISE invalid_date.
      ENDIF.
      r_endat-sign = 'I'.
      r_endat-option = 'BT'.
      r_endat-low = r_im_begda-low.
      r_endat-high = r_im_endda-low.
      APPEND r_endat.
*-- Get data from the tables
      PERFORM get_data.
*-- Populate the extract structure with data
      PERFORM write_data.
*-- Fill Export able with the extracted data
      e_t_data[] = i_zbipicprd2[].
    ENDIF.                             "First data package ?
    IF g_first EQ 'X'.
      CLEAR g_first.
    ELSE.
*-- This is important to prevent endless loop.
      RAISE no_more_data.
    ENDIF.
s_counter_datapakid = s_counter_datapakid + 1.
ENDIF.              "Initialization mode or data extraction ?
ENDFUNCTION.

The load is running successfully but its not fetching any records into BW.
In the Status tab, Step by Step Analysis the following three steps are red:
Does selectable data exist in the source system? (Red)
Data selection successfully started ? (Red)
Data selection successfully finished ? (Red)
and the below is the Analysis
Diagnosis
    The data request was a full update.
    o   In this case, the corresponding table in the source system does not
            contain any data.
    o   System Response
            Info IDoc received with status 8.
            Procedure
Check the data basis in the source system.
But i have data in R/3 and i'm able to extract it using RSA3

Function Module to display Campaign

Dear SAPiens,
I need a Function Modul, which displays the campaign.
In my Report I have the GUID or the Object ID of the campaign.
Regards,
Ahmet

The solution
    DATA lv_cpg       TYPE REF TO cl_crm_mktpl_application.
      CREATE OBJECT lv_cpg.
      CALL METHOD lv_cpg->start_application
        EXPORTING
          im_select_object = l_f_guid
          IM_MODE          = 'D'.

Function module to convert date form yyyy/mm/dd to dd/mm/yyyy format

Can any one tell me Function module to convert date form yyyy/mm/dd to dd/mm/yyyy format?

have a look at the WIKI FAQs...they are very useful
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/abap/abapDevelopmentand+Programming&
For this it says:
<i>How to convert a date to internal or external format?
Use the functions modules CONVERT_DATE_TO_EXTERNAL or CONVERT_DATE_TO_INTERNAL
to convert the date. When converting to external format, the date format from the user's user profile will be used. When converting to internal format, the result will be in YYYYMMDD format.</i>

Function module to conver date to internal format

Can anybody say what is the function module used to convert the format of the date which is taken from excel sheet to the sap format. If so pls tell me how to use that function module.

Currently my date is getting printed in format 05262005.
I want the output as 26 May, 2005.
I have tried using Set date mask option but it is not picking up in the output.
Code:
This code yields as 12 march 2006.
DATA: ZTEMP(9).
CLEAR: ZTEMP, ZDD, ZMMM, ZYYYY.
CALL FUNCTION 'CONVERSION_EXIT_IDATE_OUTPUT'
EXPORTING
INPUT = IS_DLV_DELNOTE-HD_GEN-CREA_DATE
IMPORTING
OUTPUT = ZTEMP.
ZDD = ZTEMP+3(2).
ZMMM = ZTEMP+0(3).
ZYYYY = ZTEMP+5(4).
http://www.sap-img.com/abap/abap-program-output-of-date-format.htm

Function module updating the data base table

Hi,
This post is regarding the function module not updating the data base table.
I am calling the FM SD_SHIPMENT_HEADER_CHANGE inside the ZFM. It's returning success an changing the table c_xvttk_new with the new TDLNR value. But it's not updating the Shipment table VTTK-TDLBR or VT02N Forwarding agent.
When I directly updating Forwarding agent in VT02N it's updating fine.
Please let me know what the extra step need to be included to update or COMMIT the FM for updating
Forwarding Agent(VTTK-TDLNR).
Best Regards,
Mahesh

hi friend,
This link wont five u the complete help but if u ananyse it then it might provide u some idea......
BAPI change shipment doc
regards
kanishak

Idoc error 51 - "Function module not allowed - APPL_IDOC_INPUT1'

Hello everyone,
We are uploading GL balances from legacy to SAP using the LSMW Bapi
object - bus6035
method - post
message type - ACC_DOCUMENT
Basic type - ACC_DOCUMENT03
When we run the lsmw, idoc is created, however with an error 51 saying
"Function module not allowed - APPL_IDOC_INPUT1'
The partner no. is the logical system (the system on which the lsmw is executed)
In the partner profile, we have defined this as LS. In the inbound parameters, we have defined message type = ACC_DOCUMENT, the process code is APL1 and the corresponding function module is - APPL_IDOC_INPUT1
Please let me know if we are missing something or doing anything wrong ?
Since the data in the LSMW will be read frmo a file on the presentation server, do we need to have a port configuration for the same ?
Thanks,
Sushil Joshi`

Hello Sushil
The long text of message B1(252) is quite informative for error analysis:
NA B1252
Short Text
     Function module not allowed: &
Diagnosis
     The function module and the application object type which were
     determined are not valid for this IDoc.
Procedure
     1. Please check that the process code in the inbound partner profile
         is correct.
     2. If this is the case, you should check the ALE inbound methods ALE
         inbound methods for the process code and see whether the specified
         function module and application object type are correct.
     3. If this is also the case, then the function module and the
         application object type are not permitted for the logical message
         type, message variant, message function and basis type that are
         contained in the IDoc control record. You should check whether the
         correct values have been assigned to these fields in the control
         record. If they do have the correct values, then the assignment to
         the function module and the application object type needs to be
         maintained.
On ECC 6.0 this long text contains 3 transactions for analysis:
- WE20
- BD67
- WE57
Regards
Uwe

IDOC Error - Function module not allowed: IDOC_INPUT_HRMD

Hello Gurus,
I have an issue with the IDOC Transfer. I am using the program RSEINB00 to read the file and convert the data into IDOCs with status 64.
But all my Idocs are getting created with status 51 and the error is getting populated as " Function module not allowed: IDOC_INPUT_HRMD ".
Please do let me know whats needs to be done for this to be rectified.
Thanks,
Naveen.

You are not using the right process code.
In partner profile - in message type
u will see the process code to which a function module is attached,
for ur message type, this is not the right function module.
Regards
Manu

ALE error Function module not allowed: AFS_RETAIL_ARTMAS_IDOC_INPUT.

Hi Gurus,
By ALE config I am trying to send material from one client to another ( MATMAS )
I have created two logical systems and assigned them to corresponding clients.
Created a RFC destination and assigned logical systems.
Created Distribution model in sending client.
Created partner profile in both clients.
Created Material and send to receiving system using BD10 tcode.
I checked Idoc status in Sending system, Idoc status is 03-Data is passed to port OK, status 30-Idoc ready for dispatch and status 01- Idoc generated.
But in receving system (Inbound Idoc)- I got status- 51-Application document not posted and Function module not allowed: AFS_RETAIL_ARTMAS_IDOC_INPUT.
I also checked partner profiles in both systmes- both r same.
IAny help in this regard is appreciated.
Thanks,
Bluesh

On receiver system...
1 - goto WE20
2 - locate the sender logical system (partner)
3 - in Inbound grid select message type MATMAS (double click)
4 - change "Process code" AFSA to MATM (probably AFSA is the actual code)
5 - save and reprocess the IDocs using BD87
Note: Process code AFSA is deafult but the scenarios need a spefic code that is MATM
Best Regards,
Josieudes Claudio
Edited by: Josieudes de Sousa Cláudio on Jul 12, 2011 9:06 PM

Adobe Widgets -Function module not displaying data in flex

Similar Messages

Maybe you are looking for