AdobeForm layout Error message

Hi,
Iam creating AdobeForm project select the Layout tab
get the Errormessage "Memory protection fault in OLE container control"
Thanks
Srinivas

Hi,
check your <a href="http://help.sap.com/saphelp_nw70/helpdata/en/43/e86de5008b4d9ae10000000a155369/frameset.htm">configuration settings</a>, especially the active services in SICF which are mentioned in the documentation, see also the notes mentioned there about active services in the view designer.
Regards, Heidi

Similar Messages

No Authorization Error message while displaying plan data in the layout

I am trying to execute laypr01 layout in planning area 4EXP0001(Delivered Content). I am getting a NO AUTHORIZATION error message. When I went back to SU53 and I can see that all authorizations have been successful.
Can somebody please let me know if I am missing something?
Thanks for your help.
Latha

Hi Latha,
Run transaction RSSM, go to authorization check log, enter your user. Try execute the BPS layout again, and get the error message.
Then go back to RSSM, and display the Trace by clicking on Trace > Display, and it show you what the authorization problem is.
Hope this helps,
Frank

Error message when I calling planning layout in the STS

Dear
I'm trying to use Status and Tracking System with BPS ( SEM 4.0 SP10, BW 3.5 SP14 ).
But I got some error messages when I calling planning layout in the STS screen..
I designed 2 lower unit(A,B) and 1 upper unit(C) for the test. and using Bottom-up work-flow.
I did
1. Create Planning Area in the BPS0 ( also Level, Package, Layout ..)
2. Created Web Interface in the Web Interface Builder using the upper BPS Layout .
3. Customizing STS
    - Create Sub Plan & Session
    - Asssign Hierarchy to Sub Plan
    - Determine attribute for created planning session ( Bottom-up, Auto mail )
    - Define Header characteristics for planning session to contains the planning package completely.
    - Determine Date, Person Responsible and Layout.
4. Send Start mail
5. Open STS Web Start Screen ( using B Unit responsible user .)
When he click "Open Planning" icon in the screen the following error messages were happened...
I've no idea for that because I didn't use any variables or offset settings.
I guess that comes from header settings for the planning session because when I deleted the header settings for the planning sessions, I could see the planning layout.
but I could not use lock processing in the STS.
Could you tell me what's happening to me?
[ Following error message ]
Correct the data on variables and offset in character string "?
Message Number UPC_FW092
Long Text Diagnosis
Character string "", which contains data on the variables and offset, has an invalid format, and cannot be converted.
Procedure
Correct the character string, so that it has the correct format. A correct entry on variable and offset has the following form:
<VARIABLE_NAME> [{ + | - } OFFSET]
Examples:
VAR0
VAR1+1
VAR2 - 2.
Also check whether the variable, that you want to use is available in the planning area.

Hello,
this seems to be a bug. The error message should include a variable name between ''. Since there is none, the function that raises the error was not called correctly.
It's not likely that this is related to STS since STS does not use variables at all. It's probably a problem with the layout. If you can't resolve it, please open a message to SAP Support.
Regards
Marc
SAP NetWeaver RIG

RH8 "Kindly generate WebHelp SSL layout" Eclipse script error message

I give. It seemed to offer help, of the kindly sort, but in fact it ends the process without doing its job of producing Eclipse help.
Searching the Help for this error message gives no clue. "WebHelp SSL layout" returns no help results.
Here was my process: Word import to RH8, generate WebHelp, then run RH8 Tools>Scripts>EclipseHelp
I notice there is a WebHelp.ssl file in my project directory.
Are the scripts still in Alpha state... the script appears to be eHlpDhtm.js, I tried to edit it in RH8 but got another error, "navigator undefined".
Any ideas, before I go back to Dreamweaver.... ?
thanks, -Dee

How to create Eclipse Help from RoboHelp 8.
1.    Go to Tools->Options: Check flag “Convert RoboHelp edited topics to HTML”
2.    Create an empty directory say "MyHelpPlugin" under plugins folder of Eclipse. You can find the plugins directory in the Eclipse Installed folder.
3.    Generate WebHelp SSL
4.    Open Scripts Explorer pod, View->Pods->Script Explorer
5.    Run the Script “EclipseHelp.jsx”
6.    Select the generated webhelp SSL folder i.e. WebHelp (<name>) under !SSL! folder.
7.    Click Ok
8     In Select Eclipse Plugin directory, choose the same folder as in Step 2 ("MyHelpPlugin”) under plugins folder of Eclipse.
       Caution: Contents of the folder would be deleted, so double-check the folder selected.
9.    Click Ok
10. In “Describe plugin.xml file” dialog, specify the name of Help and provider name
11. Click Ok
12. View help in Eclipse by Help -> Help Contents
And you should be able to view your Help as a Book in Eclipse..!!!
Comments/Feedback welcome
Thanks
Siddharth
RoboHelp Engineering Team

Error message messing up fileld layout

Hi,
I've a form with couple of fields and I wrote validations for two mandatory fields displayed side by side on the same line in aparticular region.when I won't enter values for both of them corresponding error messages messing up field locations.Because of which those text items are displayed one below another instead of side by side.This happens only when error messages are displayed?
Thanks,
Mahender.

Hi Jarola,
Thanks for your reply,
End user want it at both places.So "inline with field and notification" requirement is there but it's messing up layout.
Thanks,
Mahender

Error message layout - really nobody knows?!

OK, I am trying third time ...
Where can I change the layout of error message that appears when for example a report fails?
Now the user can see the query, DAD information and so on.
I want him to see only "An error has occured ...." but no technical information.
Thanks in advance.
best regards
Krzysztof Jungowski
null

Thanks for your response, uncle_alice.
If I change the code and I do it like this, could it work right?
public void removeUpdate(DocumentEvent e) {
        Dimension size = getSize();
        if (size.width >= ANCHO_MINIMO) {
            size.width -= 10;
        } else {
            size.height = getPreferredSize().height;
        this.setSize(size);
        _transicion.setCambioAsociado(this.getText());
}Thanks for read.
Edited by: Daniel.GB on 11-ago-2008 2:02
Sorry, before I had not changed the code.

T60 R and R error messages layout.bin setup.bin setup.ini and setup.dll corrupted

I have a T60 that I was only able to use for a couple of days after purchase on EBAY in the fall of '08. Ordered recovery disks in spring of '10. Just now getting to use them.
The recovery did not work. BIOS shows 60 gig hard drive as 4.5 gig. Had hard drive reformatted at repair shop, where we discovered that the HD had 3 partitions, one 50 gig partitution unformatted.
After reformat, loaded R and R from CDs then rebooted to hard drive and loaded all 6 recovery CD's as per instructions. Last disk (6 of 6) popped up error messages that \SWWORK\4GEOXCA1\LAYOUT.BIN is corrupt or unreadable, Run CHKDSK.
Then a message that said: Unable to save all data for the file \Device\HarddiskVoume3\SWWORK\4GEOXCA1\LAYOUT.BIN Failure of hardware or net connection.
Following that corrupt file messages, like the first one above, for SETUP.INI, SETUP.EXE and SETUP.DLL came up.
The computer will not boot to windows, just sits there with a blank screen after the boot message. I can boot to the R and R program by hitting the Thinkvantage (blue) button.
Can I download uncorrupted versions of these files? Is there a way to check the integrity of the files on the recovery CD (some sort of cabinet type file, IIRC an MIS extension)?
Thanks in advance for your help!

Hello,
Given the age of the computer, and the facts that you are not the original owner and it is having disk errors, you may also wish to test the hard disk drive inside it using the HDD manufacturer's diagnostics software.
Regards,
Aryeh Goretsky
I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
Deutsche Community Comunidad en Español Русскоязычное Сообщество

How do I apply special effects to a track when I keep getting error message that "Could not find layout Default Reverb GB"?

How do I apply special effects to a track in GarageBand when I keep getting error message that says"Could not find layout Default Reverb GB"?

I go to Applications to see if
GarageBand has changed and dthere is no change, still 1.42GB of file size ‹
no evidence of the 10+ GB that the installer told me I was downloading, no
evidence in my download folder that I downloded anything, and most
important, when I click on ³Effects² I¹m back to the same error message.
I¹ve been at this now for about 3 hours.
Downloading the extra content will take a very long time.
When the download has finished, the prompt for the password will appear and the installer will continue to run in the background.
Let t run. As long as GarageBand is still installing, it will give a warning, when you try to quit.
When you can quit GarageBand without a warning, restart your Mac.
The size of the GarageBand application will not change, but you should be seeing more loops. They are installed in the System Library, and the folder "Library" on your Macintosh HD should by now be 10GB larger.

New preview function for iPad–error message "Multiple page sizes not supported"

When I try to use the new preview function with my iPad I get the error message "Multiple page sizes within a layout are not supported". I have a page that is 768 x 1296. I would really like to preview this folio before publishing. Any suggestions?

If you're trying to create an article that scrolls vertically, you can create a 768x1296 article in a 1024x768 folio, but you need to select a Smooth Scrolling option when you create or import the article, or in the Article Properties dialog box.

HT1473 Had to "repair" Itunes today after error messages would not let me open. I can no longer sync my phone to computer without deleting all of the contect on my phone. I don't want to do that! I am trying to get the music from my Iphone to my Itunes li

Little background:
Went to open Itunes, error message told me I was missing files and I was unable to open. I deleted Itunes and re-downloaded and received same message. I then "repaired" Itunes from my "unistall/change" program menu. The error message then changed to being "unable to read my library of music." So I fixed that by following some other forum directions (Went to My Computer/Music/Itunes then dragged the most recent Itunes Library selection to my desktop, then opened the folder under music titled "Previous Itunes library" and moved that file into that folder. Thankfully that worked... sort of... I have some music in my library. None of the music from my super old Limewire library, or any recent music from my phone. All of which was in my library last night. Not to mention the HOURS of cd's I burned to Itunes over the entire weekend. Hundreds (at least) of songs are missing.
So I attempted to sync my phone and was told it would delete all of the files in my phone to replace with files from my computer. Which is NOT what I want to happen. Trying to get music FROM my phone to my computer.
Can someone please help me simply sync my phone to my computer? And then somehow get the music from my Limewire library to my Itunes library? I know I may not get the burned music back... But that sure would be amazing.
I am at a loss. Apple won't help unless I pay them... So hopefully this looks familiar to someone!
Thanks,
Katie

This happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout,or vice-versa, and so is looking in slightly the wrong place.
Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes .
tt2

Error messages after new MobileMe Calendar upgrade. Solved?

Quick rundown of what I've been through and how I have solved my problem.
I have a MacBook running 10.5.6 and I also have Bento 3. Recently Bento (Filemaker) told me that I would have to complete a few steps before upgrading to the new MobileMe calendar. So I followed the steps exactly. (URL: http://help.filemaker.com/app/answers/detail/a_id/7846/~/setting-up-bento-for-th e-new-mobileme-calendar)
After completing the steps. I proceeded to upgrade to the new calendar. Upgraded in less than a minute and then after opening up iCal on my mac & importing my calendars, thats when things started to go wrong. I kept getting error messages on almost every even I have ever created. I could barely even quit iCal due to all the error messages. Also, many of my events werent there after importing and the progress wheel kept spinning. Complete DISASTER! (*Luckily, I made plenty of backups before doing any of this so I was safe*) But Still I had NO iCal!
I searched and searched and could not find a complete solution. So what I did was the following and so far I believe it could be the solution to all of you guys's problems.
I followed these instructions on this website (URL: http://answers.makeitwork.com/how-to-reset-ical-on-your-mac-or-how-to-clean-up-y our-ical/) **I followed these exactly**
They are below:
+Export any Calendars you wish to retain after you reset by clicking on the Calendar you wish to retain and go to File > Export… > Export…+
+Repeat the above process for every Calendar you wish to keep. (Make sure you remember where you saved them)+
+Quit out of iCal+
+Go to Finder and click on your Home icon to display the Library folder.+
+Open that folder+
+Open the Calendars folder in the subsequent window+
+Delete all the contents within that folder+
+NOTE: If you open iCal at this point, it will initially appear that you cleared everything. Within minutes, however, everything will come back.+
+Go to your Utilities folder and open the Terminal application+
+Enter the following command: rm -rf ~/Library/{Caches,Caches/Metadata,Preferences,Application\ Support}/iCal+
+Exit out of Terminal+
+Open iCal and…Voila! Brand new iCal!+
But that did not completely work. So before doing this again, I went to my iPhone and quit syncing calendars on my mobile me account. And chose to ERASE every calendar on my iPhone.
After doing that and repeating the process above, I opened up iCal and boom, it worked. Then after I had the calendars setup the way I wanted on my MacBook, I proceeded to go to Preferences>MobileMe>Sync> and then chose to sync
I then went to Me.com and checked to see if the calendar was operable and it was 100%. I could do everything like before. Then I went back to my iPhone and just turned Calendar syncing back on in my mobileme preferences.
This has solved all my problems 100%. Hope this helps someone. Just remember that as long as you created a backup of your Calendar you should be safe.
-Cody-

Well... seems I didn't have any answer on this. I fiddled a bit more but I have to say that I really came to wits' end at this stage. A couple of observations though:
* I don't really understand this notion of a keyboard issue. My keyboard and its layout work properly but I will not be able to login regardless of login through GDM, KDM or Slim. Yet it's worth noting that in the case of GDM and SLIM the X server starts; I see the graphical interface, I click, etc. but when I type the trouble starts.
* I tried to check my xsessions-errors file. The file is really big under a frame buffer, and it wasn't clear to me, but I found strange that the log was reporting all sorts of attempts to start KDE. I don't exactly know what's going on.
If anybody has any clue, let me know... It's becoming very frustrating.
Thanks!

Error Message in ALV Report

Hi All,
I have developed a report.
After start-of-selection, i have written a perform statement, in which the data is getting retrieved for printing the same in ALV layout.
If there is no data available in the table, the code will raise an error message stating ' No data is available". This error message statment is in this PERFORM statement....
But this error message will be triggered in the different page which will be blank...
Now user would like to have the message in the same page (selection screen).
How to resolve this issue....??????
Pelase guide me.....
Regards
Pavan
Message was edited by:
Pavan Sanganal

Hi,
when your internal table is empty
give the message like
when u r in start of selection event then
form
message i000( zmessage ) with ' no data found'.
stop.
endform.
this provides u again the selection screen,
regards,
venkatesh

Dunning Wizard error message

Dear All,
I have an error message with the Dunning Wizard, and cannot print any of the Dunning Letters. The error message is: 'Invalid variable number (RPT -6300) (Field F_136) Variable '452' I have already deleted this field from the layouts, but it didn't help. I have switched back the default layout forms to the predefinied 'System' types, but the error message is still there. Do you have any idea on that issue?
Thank you, Balazs

If you never deleted any fields from system PLD when you edited your PLD, it might be application error.
Thanks,
Gordon

Library Lost - Please HeIp I tried updating my old ipod & now all 10,000 songs in my library have an ! next to them and I get the error message "song " " could not be used because the original file could not be found" on every song I try to play

Please help - this morning I tried updating one of my old ipods for my wife (this ipod hasn't been updated in 2-3 years). I plugged it into my pc, it was recognized and the software updated. I created a new playlist and tied to sync the ipod. This ipod had never been used on this pc/itunes since the pc is only 2 years old. When I tried to sync the ipod it stated that it would have to erase all the old songs on the ipod prior to syncing. I clicked ok and it proceeded to wipe out the old ipod and sync the new playlist (~1000 songs). When the sync was complete there were only 6 songs from the new playlist (all purchased this morning from itunes) on the ipod and to my horror all ~10,000 song on my pc in itunes now have a ! next to them. Only my recent purchases from itunes do not. When I click on a song with the ! I get the error message "the song " " could not be used because the original file could not be found." How do I correct this issue - I am scared to hook my ipads or other ipods to my pc for fear of losing everything?!?!? I spent 100s of hours burning the 10,000 songs from my cd collection and do not want to have to do it again.
Any help is greatly appreciated.

This "original file cannot be found" thing happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout,or vice-versa, and so is looking in slightly the wrong place.
Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes .
tt2

How to give error message for the screen element text field when wrong i/p

How to give error message for the screen element text field when wrong i/p
when wrong input given
eg.
I have a text box with SBOOK-CARRID
so when user give wrong entry in text box i.e LG
then I should give some error stating that the the input is invalid or not available ,
now it showing the error of standard messages,
i want manual message to be displayed when error comes.
Thank you,
Regards,
Jagrut Bharatkumar Shukla

Hi all,
Thank you for your valuable reply,
but the thing is that its a screen field,
i.e text box not a selection screen
i created in screen layout
with name sbook-carrid
now i want to get error message display if wrong i/p is given
thank you.
Regards,
Jagrut bharatkumar Shukla,

AdobeForm layout Error message

Similar Messages

Maybe you are looking for