Adpatch with preinstall with merged patch errors

Dear all,
I merged some finanicals related patches and when applying with preinstall mode, am getting the below :
merged all finanicals related patches and when am applyin with the unified driver am getting the below message.. is this normal
File [s01/upg/upg/patch/Patch_Video_Recommended/Finalcals/mergedest/metadata_files/10096191_patch_metadata.xml] does not exist !!
AutoPatch warning:
Unable to get patch abstract from [10096191]_patch_metadata file
File [s01/upg/upg/patch/Patch_Video_Recommended/Finalcals/mergedest/metadata_files/10144929_patch_metadata.xml] does not exist !!
AutoPatch warning:
Unable to get patch abstract from [10144929]_patch_metadata file
File [s01/upg/upg/patch/Patch_Video_Recommended/Finalcals/mergedest/metadata_files/10250232_patch_metadata.xml] does not exist !!
AutoPatch warning:
Unable to get patch abstract from [10250232]_patch_metadata file
File [s01/upg/upg/patch/Patch_Video_Recommended/Finalcals/mergedest/metadata_files/10275674_patch_metadata.xml] does not exist !!
AutoPatch warning:
Unable to get patch abstract from [10275674]_patch_metadata file
File [s01/upg/upg/patch/Patch_Video_Recommended/Finalcals/mergedest/metadata_files/10358280_patch_metadata.xml] does not exist !!
AutoPatch warning:
Unable to get patch abstract from [10358280]_patch_metadata file
File [s01/upg/upg/patch/Patch_Video_Recommended/Finalcals/mergedest/metadata_files/10359715_patch_metadata.xml] does not exist !!
AutoPatch warning:
Unable to get patch abstract from [10359715]_patch_metadata file
File [s01/upg/upg/patch/Patch_Video_Recommended/Finalcals/mergedest/metadata_files/10395967_patch_metadata.xml] does not exist !!
AutoPatch warning:
Unable to get patch abstract from [10395967]_patch_metadata file
File [s01/upg/upg/patch/Patch_Video_Recommended/Finalcals/mergedest/metadata_files/10430502_patch_metadata.xml] does not exist !!
AutoPatch warning:
Unable to get patch abstract from [10430502]_patch_metadata file
File [s01/upg/upg/patch/Patch_Video_Recommended/Finalcals/mergedest/metadata_files/10433704_patch_metadata.xml] does not exist !!
AutoPatch warning:
Unable to get patch abstract from [10433704]_patch_metadata file
File [s01/upg/upg/patch/Patch_Video_Recommended/Finalcals/mergedest/metadata_files/11071399_patch_metadata.xml] does not exist !!
AutoPatch warning:
Unable to get patch abstract from [11071399]_patch_metadata file
File [s01/upg/upg/patch/Patch_Video_Recommended/Finalcals/mergedest/metadata_files/11785680_patch_metadata.xml] does not exist !!
AutoPatch warning:
Unable to get patch abstract from [11785680]_patch_metadata file
File [s01/upg/upg/patch/Patch_Video_Recommended/Finalcals/mergedest/metadata_files/11829821_patch_metadata.xml] does not exist !!
Is this normal ?

What is your application release?
What is the command you have issued to merge the patches?
Thanks,
Hussein

Similar Messages

Merge patch in r12 apps

Hi,
I am planning to test with applying the merge patch in r 12.0.3.Can you please provide the patch number and also steps on how to apply the merge patch..
Regards,
Rajesh Pachiyappan

I am planning to test with applying the merge patch in r 12.0.3.Can you please provide the patch number and also steps on how to apply the merge patch..You can find the steps of merging patches in:
Oracle E-Business Suite Patching Procedures
http://docs.oracle.com/cd/B53825_08/current/acrobat/121adpp.pdf
https://forums.oracle.com/forums/search.jspa?threadID=&q=Merge+AND+Patches&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
For the list of patches you want to try, you can go with AutoConfig and Rapid Clone patches.
Cloning Oracle Applications Release 12 with Rapid Clone [ID 406982.1]
Using AutoConfig to Manage System Configurations in Oracle E-Business Suite Release 12 [ID 387859.1]
Thanks,
Hussein

MERGED PATCH적용시 ORA-00942 발생

제품 : AOL
작성날짜 : 2005-11-28
MERGED PATCH적용시 ORA-00942 발생
============================
PURPOSE
HR 이나 CRM patch적용시 Merge patch기능을 사용하는데 이대 ORA-00942 table or view does not exist 가 발생하는 경우가 있습니다. 이에 대한 Solution을 제공하고자 합니다.
Problem Description
HR.K patch적용시 10개에서 20개의 Merge patch 를 적용하면서 아래 error가 발생합니다.
/deve/product/deveappl/fnd/11.5.0/bin/FNDLIBR FND FNDCPBWV &ui_apps SYSADMIN
'System Admin
istrator' SYSADMIN
List of errors encountered:
_ 1 _
Routine AFPSSC encountered an ORACLE error. ORA-00942: table or view
does not exist
Review your error messages for the cause of the error. (=<POINTER>)
Cause
======
위 경우 CONCURRENT MANAGER VIEWS 가 제대로 생성되지 못해서 발생하는 것입니다.
Solution Description
아래와 같은 방법으로 Manager view를 재성성 해 줍니다.
$FND_TOP/bin 로 가서 아래 명령어를 실행합니다.
Usage: FNDLIBR FND FNDCPBWV <oracleid>/<password> SYSADMIN 'System
Administrator' SYSADMIN
For Example:
FNDLIBR FND FNDCPBWV APPLSYS/FND SYSADMIN 'System Administrator' SYSADMIN
ORACLE ID: Enter the username and password of the applsys ORACLE ID.
Enter the username and password without any spaces and separated by a slash
Reference Documents
1009731.6

11i to R12 upgrade : Unable to merge patch 9179588:R12.AD.B with 9477107:R12.AD.B and patch 7461070:R12.AD.B.1

Hello Sir,
As per readme for Patch 9179588, I am trying to merge patch (9179588:R12.AD.B) with 9477107:R12.AD.B and R12.AD.B.1
(patch 7461070). When I run admrgpch without -admode option, admrgpch completes successfully.
However, when I just add -admode option in same command, getting error that "invalid option -s". Please see below details and suggest since there is Note: This merge should be a full merge using -admode.
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
drix10:/fmstop/patches/R1211AD/merge>ls -lrt
total 13992
-rw-r--r-- 1 appltest dba 7035668 Aug 03 10:59 p7461070_R12_AIX64-5L.zip
-rw-r--r-- 1 appltest dba 79016 Aug 04 03:48 p9179588_R12.AD.B_R12_GENERIC.zip
-rw-r--r-- 1 appltest dba 38579 Aug 04 05:22 p9477107_R12.AD.B_R12_GENERIC.zip
-rw-r--r-- 1 appltest dba 94 Aug 04 13:27 manifest.txt
drix10:/fmstop/patches/R1211AD/merge>cat manifest.txt
p7461070_R12_AIX64-5L.zip
p9179588_R12.AD.B_R12_GENERIC.zip
p9477107_R12.AD.B_R12_GENERIC.zip
drix10:/fmstop/patches/R1211AD/merge>
drix10:/fmstop/patches/R1211AD/merge>admrgpch -admode -s /fmstop/patches/R1211AD/merge -d /fmstop/patches/R1211AD/merge -merge_name merged_R12AD11 -manifest manifest.txt
Error: Invalid option: -s
usage: admrgpch -help
admrgpch <source_directory> <destination_directory>
admrgpch -s <source_directory> -d <destination_directory>
[-verbose <level>] [-merge_name <pattern>]
[-manifest <filename>] [-logfile <filename>]
where
* -help Print help message.
* -verbose <level> Can be one of: { 0(SILENT),
1(QUIET), 2(VERBOSE) or 3(LOUD) }
Default - 1(QUIET).
* -merge_name <pattern> The name of the merged patch (max 24 characters).
Default - "merged".
* -s <source_directory> Path of source directory where all patches to be
merged have been unzipped.
* -d <destination_directory> Path of destination directory where the merged
patch will be created.
* -manifest <filename> Full pathname of a file containing the list of
patch zip files to be merged.
* -logfile <filename> Admrgpch log file name.
Default:"<CWD>/admrgpch.log".
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Without option -admode :
drix10:/fmstop/patches/R1211AD/merge>admrgpch -s /fmstop/patches/R1211AD/merge -d /fmstop/patches/R1211AD/merge -merge_name merged_R12AD11 -manifest manifest.txt
unzipping p7461070_R12_AIX64-5L.zip..
unzipping p9179588_R12.AD.B_R12_GENERIC.zip..
unzipping p9477107_R12.AD.B_R12_GENERIC.zip..
Executing the merge of the patch drivers
-- Processing patch: /fmstop/patches/R1211AD/merge/7461070
-- Done processing patch: /fmstop/patches/R1211AD/merge/7461070
-- Processing patch: /fmstop/patches/R1211AD/merge/9179588
-- Done processing patch: /fmstop/patches/R1211AD/merge/9179588
-- Processing patch: /fmstop/patches/R1211AD/merge/9477107
-- Done processing patch: /fmstop/patches/R1211AD/merge/9477107
Copying files...
5% complete. Copied 44 files of 876...
10% complete. Copied 88 files of 876...
15% complete. Copied 132 files of 876...
20% complete. Copied 176 files of 876...
25% complete. Copied 219 files of 876...
30% complete. Copied 263 files of 876...
35% complete. Copied 307 files of 876...
40% complete. Copied 351 files of 876...
45% complete. Copied 395 files of 876...
50% complete. Copied 438 files of 876...
55% complete. Copied 482 files of 876...
60% complete. Copied 526 files of 876...
65% complete. Copied 570 files of 876...
70% complete. Copied 614 files of 876...
75% complete. Copied 657 files of 876...
80% complete. Copied 701 files of 876...
85% complete. Copied 745 files of 876...
90% complete. Copied 789 files of 876...
95% complete. Copied 833 files of 876...
100% complete. Copied 876 files of 876...
Character-set converting files...
3 unified drivers merged.
Patch merge completed successfully
Please check the log file at ./admrgpch.log.
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
I am executing admrgpch after sourcing 11i environment and version for admrgpch is :
drix10:/fmstop/fmstest/fmstestappl/ad/11.5.0/bin>adident Header admerge.pl
admerge.pl:
$Header admerge.pl 115.22 2008/09/18 12:12:08 nissubra noship $

Hi Srini,
Thanks a lot !
Actually, I tried that one as well by running admrgpch from newly installed R12 code tree and I got below error.
drix10:/fmstop/r12apps/apps/apps_st/appl/ad/12.0.0/bin>ls -rlt admrgpch
-rwxr-xr-x    1 appltest dba        14293576 Mar 30 2009 admrgpch
drix10:/fmstop/r12apps/apps/apps_st/appl/ad/12.0.0/bin>admrgpch -s /fmstop/patches/R1211AD/merge -d /fmstop/patches/R1211AD/merge -merge_name merged_R12AD11 -manifest manifest.txt -admode
exec(): 0509-036 Cannot load program ./admrgpch because of the following errors:
        0509-150   Dependent module libnnz10.so could not be loaded.
        0509-022 Cannot load module libnnz10.so.
        0509-026 System error: A file or directory in the path name does not exist.
Then I sourced R12 environment file and ran same command. Its completed successfully.
drix10:/fmstop/patches/R1211AD/merge>admrgpch -s /fmstop/patches/R1211AD/merge -d /fmstop/patches/R1211AD/merge -merge_name merged_R12AD11 -manifest manifest.txt -admode
unzipping p7461070_R12_AIX64-5L.zip..
unzipping p9179588_R12.AD.B_R12_GENERIC.zip..
unzipping p9477107_R12.AD.B_R12_GENERIC.zip..
Executing the merge of the patch drivers
-- Processing patch: /fmstop/patches/R1211AD/merge/7461070
-- Processing file: /fmstop/patches/R1211AD/merge/7461070/u7461070.drv
-- Done processing file: /fmstop/patches/R1211AD/merge/7461070/u7461070.drv
-- Done processing patch: /fmstop/patches/R1211AD/merge/7461070
-- Processing patch: /fmstop/patches/R1211AD/merge/9179588
-- Processing file: /fmstop/patches/R1211AD/merge/9179588/u9179588.drv
-- Done processing file: /fmstop/patches/R1211AD/merge/9179588/u9179588.drv
-- Done processing patch: /fmstop/patches/R1211AD/merge/9179588
-- Processing patch: /fmstop/patches/R1211AD/merge/9477107
-- Processing file: /fmstop/patches/R1211AD/merge/9477107/u9477107.drv
-- Done processing file: /fmstop/patches/R1211AD/merge/9477107/u9477107.drv
-- Done processing patch: /fmstop/patches/R1211AD/merge/9477107
Copying files...
5% complete. Copied 45 files of 883...
10% complete. Copied 89 files of 883...
15% complete. Copied 133 files of 883...
20% complete. Copied 177 files of 883...
25% complete. Copied 221 files of 883...
30% complete. Copied 265 files of 883...
35% complete. Copied 310 files of 883...
40% complete. Copied 354 files of 883...
45% complete. Copied 398 files of 883...
50% complete. Copied 442 files of 883...
55% complete. Copied 486 files of 883...
60% complete. Copied 530 files of 883...
65% complete. Copied 574 files of 883...
70% complete. Copied 619 files of 883...
75% complete. Copied 663 files of 883...
80% complete. Copied 707 files of 883...
85% complete. Copied 751 files of 883...
90% complete. Copied 795 files of 883...
95% complete. Copied 839 files of 883...
100% complete. Copied 883 files of 883...
Character-set converting files...
3 unified drivers merged.
Patch merge completed successfully
Please check the log file at ./admrgpch.log.

Crystal Reports with VS2005 - Load Report failed Error....

Post Author: rajeshvijayan
CA Forum: Older Products
Hi,
I am running Crystal Reports viewer on IIS6.0 and windows server 2003, which was installed using the redistributable package that comes along with Visual Studio 2005. We open these reports through a web based application 1 which is run on a different application pool on IIS. We have about 3 to 4 other web applications runing on the same IIS. All the other Web applications are working fine.
This web application 1 has 2 parts - one is the normal data display quiries from the back end SQL server 2005 and the other is the Crystal Reports which also quires data from SQL Server 2005. At times i find that these reports all of them throw an error - Load Report Failed. At the same time the Part 1 of this application does work fine in showing the data that is queried from the database. Moreover at this stage, I dont find any errors in the Event viewer. If i restart this application pool alone, the reports starts working fine again.
I had gone through a few of the news groups and have made all the necessary permission related changes like the TEMP Folder, ASP.NET temporary folder, the folder in which the crystal reports is placed etc but still the same error throws up after some point in time. Wanted to know if there is any special configuration required on the Application pool when it comes to Crystal Reports. We have bout 10 to 15 users using this application for testing and it only throws this error at times and not always.
Looking forward to any kind of solution from your side.
Regards
Rajesh

Post Author: mikeeby
CA Forum: Deployment
Yes I too have been fighting this problem. I was using a XML Data file and schema file for my u201Cdatabase templateu201D in the report. I would then run my query using the .NET SQLClient then fill the report with my dataset table using the SetDataSource method from the ReportDocument object.
I tried both embedded and runtime loaded reports all worked fine on my development machine but would NOT work on my production server. I use all the server installs, played with user rights, registering DLLu2019s still nothing. I went as far as creating a winform app to fix the problem. I then had exactly the same problem, I was catching the error and it originated from the viewer control in both winform and webforms.
What finally worked for me was to attach to the database using OLE DB instead of XML/schema (xml/xsd) datasource then pasting my SQL Query into the database connection command this gave me the fields to build the report. I actually used the u201CSet Database Locationu201D Dialog in Crystal Reports so I didnu2019t have to redesign my report. This dialog works very weird but I managed to figure it out. I then used an embedded report and all seem to be well. I think there is a problem with the Crystal Reports .NET Server Install and Merge Modules used with .NET with XML files, but I cannot be sure, all I know is this worked for me.
I am concerned that if my database server is moved or renamed my report might break because the server connection is embedded in the report, but for right now it is working. I thought that was the reason for using the xsd file was to eliminate the dependence on a server connection in the report.
Good luck and I hope this helps you fix your problem too. If it does please let me know I have see so many reports of people asking questions about this problem and it seems like most are left hanging.
Mike

Apex 2.2.1- error in editing a report withIE 6: ORA-20001- Checksum error

Hi all,
I'am getting an Error when I try to edit a report with Internet Explorer 6: ORA-20001-...- Checksum error.
With Firefox it works fine.
Customer is using IE as standard browser and Firefox is not available here.
Any Ideas?
Kazim

I had to apply Patch 4554072, provided with APEX.
This patch is available in the directory patch\bug4554072.
Kazim

Problem during installation of EHP4 on IDES with preinstalled EHP3

I have a problem during installation of EHP4 on IDES with preinstalled EHP3(I got it with media sent last year in april).
Namely during PREP_EXTENSION/EHP_INCLUSION! phase i got error:
Severe error(s) occured in phase PREP_EXTENSION/EHP_INCLUSION!
Last error code set: Component 'WEBCUIF' not found
When checking components of ECC system I did not found 'WEBCUIF' component whereas in xml file (generated by SOLMAN) it exists. Which direction I should take. I am afraid to delete entries in xml file.
I need help

When checking components of ECC system I did not found 'WEBCUIF' component whereas in xml file (generated by SOLMAN) it exists. Which direction I should take. I am afraid to delete entries in xml file.
You need to download and install all requirements as selected by Solution Manager for EHP4, WEBCUIF is a required component. Do not delete any entries in the xml file.
Nelis

After updating to adobe reader 11.0.3 my registry was corrupted with a gapi32.dll missing error. I

after updating to adobe reader 11.0.3 my registry was corrupted with a gapi32.dll missing error. It was not missing and was conflicting with outlook as this dll file is a common file. The only way I could fix the problem was to do a system restore back to when I had the 11.0.2 version and everything will work with that. You have a problem with version 11.0.3 installation. The same thing happened on 3 computers so I know it is this new version of adobe reader which is the problem.

It would be great, if you could provide us with the following details:
1. The OS you are working on.
2. The version of MS Office installed on your machine.
3. A screenshot of the error message along with the scenario in which the same is displayed.
4. How exactly did you go about updating Reader 11.0.02 to 11.0.03. Was it via the updater mechanism or by downloading the patch from the Adobe site.
Also, it would be great if you could let us know if there was any other Windows or Antivirus related updates applied on your machine in the same timeframe as the Reader update.

How to create recovery discs for HP notebook with preinstalled Windows ?

I Have just bought the HP ProBook 4530s with preinstalled Windows 7 Home Premium 64bit.
The notebook was purchased in the hipermarket so that it has no Windows installation discs.
There is a Windows 7 label sticked to the machine.
When I try to use standard Windows 7 procedure:
Start > Control Panel > Backup Your Computer > Create a system repair disc
it shows the error:
System Repair disc could not be created
the parameter is incorrect 0x80070057
How to create system recovery discs ?
BR
Sylwek

Hi BH,
I have read the link you suggested and tried to find HP Recovery Manager at my notebook.
1) I typed Start > Search > "Recovery" but it was not installed.
2) I ran the HP Software Setup to check recommended and optional HP applications. HP Recovery Manager was not there.
3) I downloaded HP Recovery Manager for Windows 7 and ran the installation
I accepted the default folder.
C:\SWSetup\sp45415
It showed an installation form for a while and then completed with no message.
4) I repeated action (1) but no HP Recovery Manager.
5) I checked uninstall menu but no HP Recovery Manager.
Please let me know what to do next ?
BR
Sylwek

After installation of R12.1.1, upgraded with 12.1.3 patches

Hi All,
After installation of R12.1.1, upgraded with 12.1.3 patches then accessing the login page after entering the userid and password I am getting FRM-92101 error "There was a failure in the form server, please check your configuration".
I am unable to open a form in the application. My environment is:
OS = Oracle Enterprise Linux 5.5 (64-bit)
Application = R12.1.3 (VIS)
Client = Laptop having Windows 7 and IE 8, and have already disabled XSS filter.
But still not success, Kindly help so that I can start my training on this server.
Your early reply would be appreciate.
Regards
Muhammad

Hi;
FRM-92101:
Recommended Browsers for Oracle E-Business Suite Release 12 [ID 389422.1]
FRM-92101: There Was a Failure in the Forms Server During Startup After Fresh R12 Installation [ID 429627.1]
R12 fresh install FORMS DO NOT LAUNCH - FRM-92101/500 [ID 427714.1]
FRM-92101: Forms Server oracle.forms.net.ConnectionException: Forms session <1> failed during startup: no response from runtime process [ID 880088.1]
Forms: 9.x and 10.x: Troubleshooting FRM-92050, FRM-921xx [ID 189867.1]
Known Causes of FRM-92101 Error In Forms [ID 604633.1]
Also check:
http://onlineappsdba.com/index.php/2009/06/15/frm-92101-with-internet-explorer-8-how-to-uninstall-ie8/
Re: R12 database and JRE Issue
FRM-92101 There was a failure in the forms server during startup
Regard
Helios

BSOD with both Kernal Security Check Error and Bad Pool Header.

All -
I have a HP DV7 laptop with Windows 8.1. It has BSOD with both Kernal Security Check Error and Bad Pool Header.
Despite doing all the built in HP tests, there is nothing. Using an Anker HardDrive Dock results in the identical errors on another machine.
Bottom line, even if I could see the DMP files (which I cannot); because the machine fails to boot, there are no files to be copied.
I have tried various AIO and UEFI disks and USB, and the laptop NEVER accepts the PREINSTALL environment. Being unable to use the Anker has never happened. I seem completely locked out of the drive. Any suggestions? Thx.
Bruce A Ades

Hi Texas_Bruiser
Some required details are needed for us to help you.
Ensure that the BIOS/UEFI has been configured to allow boot from DVD/CD or USB.
When you attempted to boot into PREINSTALL environment (PE) by using disks or USB, we need more details about error message or what happened?
If your computer cannot even boot into Windows PE by using installation media, we suggest you check if memory and other hardware are works properly on this computer. Also try to plug this hard disk on other computer as data volume, see if the hard disk works.
Regards
D. Wu

Want to run Windows 7 64-bit on new G550 with preinstalled 32-bit version

Hi everyone,
I received my (2958 mode NTDE3UK) G550 yesterday. It's got 4GB ram and system properties tells me it is 64-bit capable. However, the version of Windows 7 preinstalled is the 32-bit version and there are no disks supplied with this laptop. How do I move to the 64-bit version of Windows 7?
All assistance greatly appreciated.
PS - it also suffers from repeated fan cycles as other G550 owners have found.

if its preinstalled with vista 32 bit service pack1. 32 bit,there's a way to force it to use all of your ram capacity.
download this software and apply the program(patch) then follow this procedure:
http://dl.phazeddl.com/1680792/Ready_For_4GB
2-RUN CMD AS ADMINISTRATOR
3-bcdedit /set {current} pae ForceEnable
4-bcdedit /set {current} kernel ntkr128g.exe
5-bcdedit /set {current} testsigning on

User profile sync Sharepoint 2010 photos thumbnail with AD and Lync 2010 - error on Full Synchronization- get events 8311, 6110, 6803 FIMSynchronization Service

User profile sync Sharepoint 2010 photos thumbnail with AD and Lync 2010 - error on Full Synchronization- get events 8311, 6110, 6803 FIMSynchronization Service
We're trying to set up sync between Sharepoint and AD so photos are displayed in Lync.
The certificate referenced in 8311 is not the sharepoint root cert, its the UCC cert with our FQDN of the site. sharepoint.domain.com
Is this causing the problem with the sync and holding up the photos?
I have tried several proposed fixes, it hasn't helped.
tried this as well:
http://blogs.technet.com/b/praveenh/archive/2011/05/11/event-id-8311-certificate-validation-errors-in-mss-2010.aspx
Josh

Try this fix and see if its sync the photos:
http://blogs.technet.com/b/steve_chen/archive/2010/09/20/user-profile-sync-sharepoint-2010.aspx#Profile Picture Property
http://blogs.technet.com/b/steve_chen/archive/2010/09/20/user-profile-sync-sharepoint-2010.aspx#SyncPicAD2SPS
Update-SPProfilePhotoStore -CreateThumbnailsForImportedPhotos 1 -MySiteHostLocation <mySiteHostURL>
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

Yes another user with problem with Apple Mobile Device Support, I am getting the error message: Service 'Apple Mobile Device'(Apple Mobile Device) failed to start. Vertify that you have sufficient privileges to start system service....

Yes another user with problem with Apple Mobile Device Support, I am getting the error message: Service 'Apple Mobile Device'(Apple Mobile Device) failed to start. Vertify that you have sufficient privileges to start system service....I hit retry and it came up again. I hit ignore and it prompted me to hit finish so Itunes can open. I looked thru alot of these posts on here to try and resolve this problem myself but it's not working too well...I downloaded Itunes to my desktop so I can right click it with the program i downloaded called WinRAR. I extracted it and then went into the folder called Itunes64setup. I saw the file called AppleMobileDeviceSupport64 in there so I began to try and download it on it's own. Well that didn't work as I planned and got this error message:
Apple Mobile Device Support wasn't installed on your computer. The installer encountered errors before Apple Mobile Device Support could be configured. Your system has not been modified. To retry these operations at a later time,please run the installer again.
Well I tried to run it again and came up with the same message...I see that some people got great support to help them so I am hoping someone can help me as well. I know "b nor" is very qualfied and hopefully can help me! Please advise what I can do. Thank you

Hi Iss9243,
Welcome to the Support Communities!
You've already tried some great troubleshooting steps, but the article below gives you quite a few more for this issue. Hope it helps ....
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
- Judy

While trying to change a BOM with transaction CS02, a runtime error appears

While trying to change a BOM with transaction CS02, a runtime error appears.
In intial screen he entered material ,plant BOM usage and date valid from after executed then id displayed item list in that he wantu2019s delete one item, he has been deleted selected item after that when he was saving he is getting runtime error
Developer trace
ABAP Program SAPLKED1_WRITE_CE4_BPS1                 .
Source LKED1_WRITE_CE4_BPS1U01                  Line 30.
Error Code SAPSQL_ARRAY_INSERT_DUPREC.
Module $Id: //bas/640_REL/src/krn/runt/absapsql.c#17 $ SAP.
Function HandleRsqlErrors Line 775.
RABAX: level LEV_RX_STDERR completed.
RABAX: level LEV_RX_RFC_ERROR entered.
RABAX: level LEV_RX_RFC_ERROR completed.
RABAX: level LEV_RX_RFC_CLOSE entered.
RABAX: level LEV_RX_RFC_CLOSE completed.
RABAX: level LEV_RX_IMC_ERROR entered.
RABAX: level LEV_RX_IMC_ERROR completed.
RABAX: level LEV_RX_DATASET_CLOSE entered.
RABAX: level LEV_RX_DATASET_CLOSE completed.
RABAX: level LEV_RX_RESET_SHMLOCKS entered.
RABAX: level LEV_RX_RESET_SHMLOCKS completed.
RABAX: level LEV_RX_ERROR_SAVE entered.
RABAX: level LEV_RX_ERROR_SAVE completed.
RABAX: level LEV_RX_ERROR_TPDA entered.
RABAX: level LEV_RX_ERROR_TPDA completed.
RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
RABAX: level LEV_RX_END entered.
RABAX: level LEV_RX_END completed.
RABAX: end RX_RFC
In sm21
Perform rollback
Run-time error "SAPSQL_ARRAY_INSERT_DUPREC" occurred
     Short dump "090618 110101 donalda 11557 " generated
Runtime Error          SAPSQL_ARRAY_INSERT_DUPREC
Exception              CX_SY_OPEN_SQL_DB
       Occurred on     18.06.2009 at   11:01:01
The ABAP/4 Open SQL array insert results in duplicate database records.
What happened?
Error in ABAP application program.
The current ABAP program "SAPLKED1_WRITE_CE4_BPS1" had to be terminated because
one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
What can you do?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
Error analysis
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_SY_OPEN_SQL_DB', was
neither
caught nor passed along using a RAISING clause, in the procedure
"RKE_WRITE_CE4__BPS1" "(FUNCTION)"
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is:
If you use an ABAP/4 Open SQL array insert to insert a record in
the database and that record already exists with the same key,
this results in a termination.
(With an ABAP/4 Open SQL single record insert in the same error
situation, processing does not terminate, but SY-SUBRC is set to 4.)
How to correct the error
The exception must either be prevented, caught within the procedure
"RKE_WRITE_CE4__BPS1"
"(FUNCTION)", or declared in the procedure's RAISING clause.
To prevent the exception, note the following:
Use an ABAP/4 Open SQL array insert only if you are sure that none of
the records passed already exists in the database.
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"SAPSQL_ARRAY_INSERT_DUPREC" CX_SY_OPEN_SQL_DBC
"SAPLKED1_WRITE_CE4_BPS1" or "LKED1_WRITE_CE4_BPS1U01"
"RKE_WRITE_CE4__BPS1"
If you cannot solve the problem yourself, please send the
following documents to SAP:
1. A hard copy print describing the problem.
   To obtain this, select the "Print" function on the current screen.
2. A suitable hardcopy prinout of the system log.
   To obtain this, call the system log with Transaction SM21
   and select the "Print" function to print out the relevant
   part.
3. If the programs are your own programs or modified SAP programs,
   supply the source code.
   To do this, you can either use the "PRINT" command in the editor or
   print the programs using the report RSINCL00.
4. Details regarding the conditions under which the error occurred
   or which actions and input led to the error.

Hi ,
you are getting beacuse u are trying to do mass update to database.
Please check that below note are applicable to your system.
Note 453313 - DBIF_RSQL_ERROR_INTERNAL for mass insert
Note 869534 - AFS MRP doesn't work properly with all BOM item categories
Thanks Rishi Abrol

Adpatch with preinstall with merged patch errors

Similar Messages

Maybe you are looking for