ADRMAS IDoc for customer address

Hi,
I am trying to send the customer address information via ALE. We are using a custom message type (ZDEBMAS) to send the customer data. I am aware that additional address information can be sent using ADRMAS. However, this message type is linked to a BAPI and I am unable to trigger the IDoc. I have activated the change pointers for ADR2MAS, ADR3MAS & ADRMAS as suggested in previous posts. I have also added the BAPI in the Model view with Object type - BUS4001 and Method - SAVEREPLICA. Partner profiles have been generated as well.
Can anyone guide me as to what I am missing? Any help is greatly appreciated.
Thanks!
Sheetal

Hey,
I think there are two possible problems:
1. Please log in to XI system,
check in transaction IDX1,
which RFC destination is used for the system SAPR3D.
than test this RFC destination in transaction SM59.
2. Please check (via transaction WE30) that the IDOC in the ECC 6.0
have the same fields as the IDOC in 4.6C.
If they have different fields, than you must change the field "version" of channel of the 4.6c system (in the Integration builder configuration).

Similar Messages

Generate outbound idoc for Customer Master

Hi Developers,
I have requirement to generate outbound IDOC for Customer Master Data. I need to send customer master data through an Outbound IDOC. Can we generate an outbound DEBMAS06 idoc? Can someone help me finding a solution to this problem?
Thanks in advance for helping.
Regards,
Gajendra

Hi,
If you have done all the required settings (logical system, partner profiles, distribution model), then either transaction BD10 / BD14 will help you generate the IDOC.
If you want to send the idocs automatically, then you will to configure some program.
Unlike transaction data, Master data IDOCS are not triggered immediately, you will have to do the required configuration in SPRO.
Transaction SPRO
SAP Customizing Implementation Guide -->
SAP Web application Server --> Application Link Enabling --> Modeling and Implementing Business Processes -->
Master Data distribution --> Replication of Modified Data --> Creating IDOCS from Change Pointers
Take a look at this thread.
Re: automatic Idoc outbound
Regards,
Ravi
Note : Please mark the helpful answers
Message was edited by: Ravikumar Allampallam

How to create IDOC for customer defined table

hi,
How to create IDOC for customer defined table Records and how to send this IDOC to target system.
what message type will be used and on receiving system how to post these records.
thankx.
pillac.

Hi,
You need to create a custom message type and custom IDOC type for this with whatever fields you want send. You need to create segments (WE30), IDOC type (WE30), Message types (WE81) and assign the message type to the IDOC type (WE82).
You will have trigger the IDOC using a Report or something after doing the partner profile settings.
Similary in the target system also, you will have do all the settings.
Take a look the links to find out what settings needs to be done.
http://help.sap.com//saphelp_470/helpdata/EN/0b/2a611c507d11d18ee90000e8366fc2/frameset.htm
http://www.sappro.com/downloads/OneClientDistribution.pdf
Regards,
Ravi
Note : Please mark the helpful answers and close the thread if the issue is resolved.

Idoc for customer payment advice

Hi all,
We receive Idoc for payment advice from customer. Can some body tell me how can I read this information to match the invoice.I mean how can I map Idoc field to SAP internal tables.
How do I know which Idoc field will hit which SAP table & which table.
So please guide me about Idoc mapping & finding appropriate field for inbound idocs.
Edited by: Nik Wallace on Aug 5, 2008 8:04 AM

Hello,
Customer of vendor payment advice is the advice informing the customer that the amount has been paid against which invoices.
You need to configure the payment advice in FBZP or give them as part of variant in F110.
When you run the automatic payment program, based on the FBZP settings, a payment advice gets triggered.
You are able to see your payment advice in SP02. To generate payment advice correctly, please make sure your settings in Variant (F110) are correct. Any invalid entries will result in NO generation of payment advice.
Hope this is useful to you.
Regards,
Ravi

Table for customer address

Hi friends,
I need to retrieve data for the customer address, which table should I look into
Thanks

hiii..
KNA1-General Data in Customer Master
KNAS-Vat registration numbers general section
KNB1-Customer Master (Company Code)
KNB4-Customer Payment History
KNB5-Customer master (Dunning Data)
KNBK-Customer Master (Bank Details)
KNC1-Customer Master (Transaction Figures)
KNC3-Customer Master(Special G/l transaction figures)
KNKA-Customer master credit management:Central data
KNKK-Customer master credit management:Control Area data
KNMT-Customer Material info record data tables
KNVA-Customer Master Loading points
KNVD-Customer Master record sales request form
KNVI-Customer master tax indicator
KNVK-Customer master contact partner
KNVS-Customer master shipping data
Regards,
D Rana

IDOC for Customer Account Statement

Hi All,
I have a requirement that the Customer Statement should be sent thru and IDOC for some specific task. We are using the F.27 to print the Customer Account Statement. In the process of finding the IDOC for the same, we found FINSTA01 and Message type FINSTA will suit the requirements. Now the issue is, when i use F.27, it generates the SPOOL and starts priniting the same, insetad i need the same to initiate the IDOC. I mean the communication method to be IDOC instead of the Physical Print. Can anyone help me on how to do this? also please through some light on the things needs to be done if anyone of has come across such requirement.
Thanks in Advance.
Regards
Nambi

Hi Thiruchudar,
There are some setup you need to do. If you're not technically well grounded, i would suggest you get an ABAPer to do this for you. Basically, the following are what you need to do:
1. Create the Partner Profile for your Customer using transaction code WE20. Click on the create icon and enter Partner type KU (Customer) and enter the Customer Number.
2. Next, add an Outbound Message Type FINSTA by clicking on the green + icon under the outbound parameters. Complete all the other mandatory fields as appropriate. Save your Entries.
3. Test your outbound partner profile for your customer by running the customer statement again using transaction code F.27.
Your output control would have been created with the medium EDI.
4. Use transaction code WE05 to display the iDocs that would have been created.
Note: You still have to set up the communication between your system and that of your Customer to allow for EDI transmission.
I hope the above helps.
Do not forget to award the points please.
Thanks and Regards,
Jacob

Idoc for Customer to Customer Posting

Hi
I want to upload finance data in SAP using IDOCS through XI
I'm using the following idocs
1) GL to GL Posting ........ ACC_GL_POSTING01 (Accounting: General G/L Account Posting)
2) GL to Customer Posting ..... ACLREC01 (Posting in accounting: Billing document)
3) Customer to Customer posting ......... ?
Which idoc should be used for Customer to Customer posting ?
I want to Debit one Customer & Credit the other Customer.
Please Suggest
Regards
Abhijit

Hi ,
You can try this question in the ABAP Help instead in XI , So that you may get more help
Regards,
Jude

Idoc for customer transactional data

Dear all,
Can any of you suggest which Idoc can be used for customer to customer postings.
Thanks & Regards
JKTECH

Anybody please sugget

Regarding ALE-iDoc for Customer Master, J1ID and FD32

Hello all
Scenario:
As per client's requirement we have to develop idoc so that followings requirements will meet:
Say there are two servers a) MDM Server b) PRD Server
1] As and when I'll create customer master data in MDM server then customer master should get created with that data in PRD server
which I can achieve through BD12 by doing some idoc enhancements
2] Simillarly when i'll create data using transaction J1ID and FD32 in MDM Server (Data relevant to customer master) then that data also should get created in PRD server using Idoc
May I know which
1)message type we can use (as we use DEBMAS in case of Customer Master) for J1ID and FD32
2) Any transaction to send data from one server to another server for transaction J1ID and FD32 (as we use BD12 in case of Customer master for sending data created using transaction XD01)
Thanks,
Mahesh

Hello Mahesh,
In the case of customer master it would be better if you would use standard message types and t code to transfer ddata.
But in the case J1ID and FD32 you can build a standalone idoc
Follow these steps to build custom message types and futher transactions
WE81 - Create message type
WE31 - Create segment
WE30 - Create Idoc type
SALE - Define Logical system (not required if already exists)
SM59 - Define RFC (not required if already exists)
WE21 - Define ports (both in sender and receiver)
WE20 - Define Partner profile (both in sender and receiver)
BD46 - Distribue the model view.
SE38 - Create a program to send the idoc in the sender sytem.
SE37 - Build inbound function module to receive the idoc for receiver system
WE57 - Assign FM to message type
BD51 - to change the characteristics for inbound FM
WE42 - Create Inbound process code.
Hope this would help you.
Thanks and Regards,
Ranjith Nambiar

How to generate an outbound IDOC for customer Invoice

Hi
I want to configure that if I create a invoice using TCODE FB70 it should automatically create a outbound IDOC ACC_BILLING( for customer).How I can achieve this. Can any one give me complete step by step help.
thanks in advance.
karunb

You should be able to use it using 'change pointers'.
For this you will first need to activate change pointer for this message type (check SALE > modelling..>Master data distribution). Next, you will need to setup your ALE config for this IDOC/message type.
In ALE, you will be able to either run a standard SAP report adhoc, or schedule it such that all changes recorded using change pointer (changes including new customerr records) are collected as IDOCs and sent.
This is a standard SAP scenario, you only need to do the config/setup to get there. You may wish to read more on change pointers to understand this.
cheers,

Error while posting the IDoc for Customer Invoice.

hi,
I m posting Customer Invoice through LSMW using IDocs.
Basic type is FIDCCP02 and message is FIDCC2.
While posting the Idoc I m getting error as:
'Document or line item does not exist for invoice reference'.
I m not getting the error why it is asking for invoice reference because
in FB01 it is not asking for any reference or anything.
Even in f-22 also it is not asking for the same.
In Idoc all the item level values are coming prorperly.
If anybody worked on such issues then please reply.
-Thanx.
-Umesh

Hi,
Where you able to resolve your issue, I would appreciate if you can share the solution.
Thanks

Error while posting Idoc for customer invoice.

hi,
I m posting Customer Invoice through LSMW using IDocs.
Basic type is FIDCCP02 and message is FIDCC2.
While posting the Idoc I m getting error as:
'Document or line item does not exist for invoice reference'.
I m not getting the error why it is asking for invoice reference because
in FB01 it is not asking for any reference or anything.
In Idoc all the item level values are coming prorperly.
If anybody worked on such issues then please reply.
-Thanx.
-Umesh

Hi Umesh,
Try posting customer invoice through TCode - F-22. There it may be asking for reference number. Generally we post customer invoice by F-22 not from FB01.
If you are getting error you can add reference field in your LSMW it may be mandatory in F-22.
Ashven

IDOC for custom confirmation categories in a purchase order

Hi Gurus,
I am stuck with a problem in incoming IDOCS. We are creating new confirmation categories, other than AA, AB and LA.
I need two of them, Z1 and Z2 (custom confirmation type/category) to come via EDI
However SAP says that only conf categories associated with internal conf categories (order acknowledgment, shipping notification, rough goods receipt) can come via EDI.
Creating internal conf categories does not seem to be allowed in SAP.
Is there some specific IDOC type that can be used to bring in z1,z2?
we are already using DESADV for LA and SHPMNT for shipment.
I am trying SHPCON for this purpose, but i dont see any field for conf type (EBTYP). Then i looked into ORDRSP
Any help will be appreciated
Thanks
Nitin

Hi,
SAP has provided two reports that you can use for capturing all changes you have made to your POs -
1) RSSCD100; and
2) CHANGEDOCU_READ
Both reports shall be run with Object Class EINKBELEG.
Cheers,
HT

Disable duplicate check for customer address on sales order creation

I am using the following tables to create sales order as well as customer and addresses together. All data are coming from third party system through dblink.
OE_HEADERS_IFACE_ALL
OE_LINES_IFACE_ALL
OE_CUSTOMER_INFO_IFACE_ALL
however, whenever the address to be created already exist in OFS, the sales order import program ended with:
Source/Order/Seq/Line Message
*1122/SOSHM006// Duplicate SHIP_TO ADDRESS found for SOSHM006_S. Please correct the data.*
*1122/SOSHM006// Duplicate BILL_TO ADDRESS found for SOSHM006_B. Please correct the data.*
how can I disable the above checking? ie: allow the address to be created even the address already exist.
See Example below, notice that the addresses for SOSHM006_S and SOSHM005_S are identical, and addresses for SOSHM006_B and SOSHM005_S are identical, but we want them to be created as separately addresses.
Example (first time)
Insert into ONT.OE_HEADERS_IFACE_ALL (ORDER_SOURCE_ID, ORIG_SYS_DOCUMENT_REF, ORG_ID, ORDERED_DATE, ORDER_TYPE, PRICE_LIST, SALESREP_ID, SALES_CHANNEL_CODE, SHIP_FROM_ORG_ID, CUSTOMER_NUMBER, BOOKED_FLAG, CREATED_BY, CREATION_DATE, LAST_UPDATED_BY, LAST_UPDATE_DATE, OPERATION_CODE, ORIG_SHIP_ADDRESS_REF, ORIG_BILL_ADDRESS_REF) Values (1122, 'SOSHM005', 86, sysdate, 'Corporate (NOR)', 'Corporate', 1, 'CORPORATE', 90, 'SHM01', 'Y', 0, sysdate, 0, sysdate, 'INSERT', 'SOSHM005_S', 'SOSHM005_B');
Insert into ONT.OE_LINES_IFACE_ALL (ORDER_SOURCE_ID, ORIG_SYS_DOCUMENT_REF, ORIG_SYS_LINE_REF, LINE_TYPE, INVENTORY_ITEM, ORDERED_QUANTITY, SHIP_FROM_ORG_ID, FULFILLMENT_SET_NAME, UNIT_LIST_PRICE, UNIT_SELLING_PRICE, CREATED_BY, CREATION_DATE, LAST_UPDATED_BY, LAST_UPDATE_DATE, OPERATION_CODE, SUBINVENTORY) Values (1122, 'SOSHM005', 'SOSHM005A_S', 'Corporate Line (NOR)', '01-09-PAC-3522-01', 1, 90, '1', 0, 0, 0, sysdate, 0, sysdate, 'INSERT', 'Mesad');
insert into OE_CUSTOMER_INFO_IFACE_ALL(CUSTOMER_INFO_REF, CUSTOMER_INFO_TYPE_CODE, current_customer_number, org_id, COUNTRY, ADDRESS1, CITY, STATE, POSTAL_CODE, IS_SHIP_TO_ADDRESS, IS_BILL_TO_ADDRESS, CREATION_DATE, CREATED_BY, LAST_UPDATE_DATE, LAST_UPDATED_BY) values('SOSHM005_S', 'ADDRESS', 'SHM01', 86, 'MY', 'Ship4 479, JALAN PASIR PUTEH 31650 IPOH PERAK.', 'IPOH', 'Perak', '31650', 'Y', 'N', sysdate, 0, sysdate, 0);
insert into OE_CUSTOMER_INFO_IFACE_ALL(
CUSTOMER_INFO_REF, CUSTOMER_INFO_TYPE_CODE, current_customer_number, org_id, COUNTRY, ADDRESS1, CITY, STATE, POSTAL_CODE, IS_SHIP_TO_ADDRESS, IS_BILL_TO_ADDRESS, CREATION_DATE, CREATED_BY, LAST_UPDATE_DATE, LAST_UPDATED_BY) values('SOSHM005_B', 'ADDRESS', 'SHM01', 86, 'MY', 'Bill4 479, JALAN PASIR PUTEH 31650 IPOH PERAK.', 'IPOH', 'Perak', '31650', 'N', 'Y', sysdate, 0, sysdate, 0);
Example (second time) - the differences are highlighted in bold.
Insert into ONT.OE_HEADERS_IFACE_ALL (ORDER_SOURCE_ID, ORIG_SYS_DOCUMENT_REF, ORG_ID, ORDERED_DATE, ORDER_TYPE, PRICE_LIST, SALESREP_ID, SALES_CHANNEL_CODE, SHIP_FROM_ORG_ID, CUSTOMER_NUMBER, BOOKED_FLAG, CREATED_BY, CREATION_DATE, LAST_UPDATED_BY, LAST_UPDATE_DATE, OPERATION_CODE, ORIG_SHIP_ADDRESS_REF, ORIG_BILL_ADDRESS_REF) Values (1122, *'SOSHM006'*, 86, sysdate, 'Corporate (NOR)', 'Corporate', 1, 'CORPORATE', 90, 'SHM01', 'Y', 0, sysdate, 0, sysdate, 'INSERT', *'SOSHM006_S'*, *'SOSHM006_B'* );
Insert into ONT.OE_LINES_IFACE_ALL (ORDER_SOURCE_ID, ORIG_SYS_DOCUMENT_REF, ORIG_SYS_LINE_REF, LINE_TYPE, INVENTORY_ITEM, ORDERED_QUANTITY, SHIP_FROM_ORG_ID, FULFILLMENT_SET_NAME, UNIT_LIST_PRICE, UNIT_SELLING_PRICE, CREATED_BY, CREATION_DATE, LAST_UPDATED_BY, LAST_UPDATE_DATE, OPERATION_CODE, SUBINVENTORY) Values (1122, *'SOSHM006'*, *'SOSHM006A_S'*, 'Corporate Line (NOR)', '01-09-PAC-3522-01', 1, 90, '1', 0, 0, 0, sysdate, 0, sysdate, 'INSERT', 'Mesad');
insert into OE_CUSTOMER_INFO_IFACE_ALL(CUSTOMER_INFO_REF, CUSTOMER_INFO_TYPE_CODE, current_customer_number, org_id, COUNTRY, ADDRESS1, CITY, STATE, POSTAL_CODE, IS_SHIP_TO_ADDRESS, IS_BILL_TO_ADDRESS, CREATION_DATE, CREATED_BY, LAST_UPDATE_DATE, LAST_UPDATED_BY) values( *'SOSHM006_S'* , 'ADDRESS', 'SHM01', 86, 'MY', 'Ship4 479, JALAN PASIR PUTEH 31650 IPOH PERAK.', 'IPOH', 'Perak', '31650', 'Y', 'N', sysdate, 0, sysdate, 0);
insert into OE_CUSTOMER_INFO_IFACE_ALL(
CUSTOMER_INFO_REF, CUSTOMER_INFO_TYPE_CODE, current_customer_number, org_id, COUNTRY, ADDRESS1, CITY, STATE, POSTAL_CODE, IS_SHIP_TO_ADDRESS, IS_BILL_TO_ADDRESS, CREATION_DATE, CREATED_BY, LAST_UPDATE_DATE, LAST_UPDATED_BY) values( *'SOSHM006_B'* , 'ADDRESS', 'SHM01', 86, 'MY', 'Bill4 479, JALAN PASIR PUTEH 31650 IPOH PERAK.', 'IPOH', 'Perak', '31650', 'N', 'Y', sysdate, 0, sysdate, 0);

Hi George Chen
with sales order stock .. is ther a way of allocating the stock from unrestricted stock .. i understand that you have to have the stock in a "special" area to move it to the sales order?
excuse my ignorance but what is IS-AD solution?
thanks
Nick

Outbound IDOC for customer master

Hi
I want to configure that as soon as I create a customer master using the transaction XD01 it should generate an outbound IDOC. Can anyone tell me how to configure this and what need to be br configured.
Thanx in advance
regards
Vinod

Hi Vinod,
We can distribute master data in many ways like Send original copy, Send changes and third one is Pull master data.
Go to txn SALE, and follow the steps to configure your scenario.
I think in your case you have to use Message Control or
Output Determination.
visit this link for message control...
http://help.sap.com/saphelp_erp2004/helpdata/en/c8/198afa43b111d1896f0000e8322d00/frameset.htm
Regards,
Narinder Hartala

ADRMAS IDoc for customer address

Similar Messages

Maybe you are looking for