Advanced and complex validation procedures

Hi,
We have a derivation procedure with more than 40000 caracters and impossible to split it. I know that we can create a package and put it in a created account e.g. pack and give an execute access to the rxc_pd account then call this package from OC within procedure, custom code, predetail.
Can a Datamanager perform this work (create the package, compile it, put it in the write account and grant the access)? if yes: which tools are recommanded to do that?
What is the common way to do for the long procedures?
What are the common tools used by the datamanager programer?
I will appreciate a lot for any help.
Thanks in advance

Thanks a lot for your reply and clarification. Our Oracle DBA is in the IT Department and to ask him to put the package in production will take several days, because the IT department told us that their DBA must compile, test and validate the package passing through a long process. As I understood we have not choice and we must request the DBA to do this.
Before OC we worked with a local system and we performed extracts from the Database to the SAS system every time we wanted to run any derivation/validation procedures.
Best Regards,
Nassim

Similar Messages

OC complex validation procedures discussion

Hi all,
So glad to find such a place here. I have used OC for 3 years and would like to make friends with you all. If you got any complex validation procedures in OC that haven't been resolved, welcome to write to me at [email protected], i would like to discuss with you all.
fight2009

Thanks a lot for your reply and clarification. Our Oracle DBA is in the IT Department and to ask him to put the package in production will take several days, because the IT department told us that their DBA must compile, test and validate the package passing through a long process. As I understood we have not choice and we must request the DBA to do this.
Before OC we worked with a local system and we performed extracts from the Database to the SAS system every time we wanted to run any derivation/validation procedures.
Best Regards,
Nassim

Any real time complex validations and assignments

Hi frds,
Any one can share few real time complex validations and Assignments on product object?
Thanks in advance
Regards.

Rajeev,
I do not have real time validation exaples. There are couple of blogs on SDN
search for
MDM Expression Engine
(the document name is MDM Express Engine: Validations,Assignments and More)
Parsing and Validating Numbers
(used for check digits but gives more insight on writing validations.)
I hope this helps
Regards
Bala Pochareddy

Large and Complex Applicaton development process in Apex

Hi,
Apex can scale well in terms of Data size, number of users etc. We are trying to decide if Apex is suitable for our next large and complex application (Large and complex in terms of quantity and efforts of work and business logic). We have already identified that Apex can handle complexity of our transaction/business logic management. My question is about scaling application development process in Apex. I am curious to know about what other people are doing with Apex in terms of:
* What is the largest Number of Pages, Forms, Reports etc. within a single application one has developed
* Assuming with so many pages (objects) to be developed, more than one developers must have worked on the project and the project is divided into multiple phases release. What was/is the max number of developers in your project?
* Did you run into "Code Conflct" issues for Apex Shared Objects when multiple people had to work on them? How did you manage it and merge the changes?
* How did you identify, track and manage changes in Apex objects between various project phases and between various environments (DEV, TEST, UAT, PROD).
* What else you would like to add (in terms of development life cycle only) to my thoughts above that we need to consider while choosing Apex for our next project.
* Based on your experience would you recommend Apex for our large and complex application?
Many thanks in advance for your responses.
Paresh (yparesh at gmail dot com)

Hi Przemek, Jerry and Roel,
Thanks to all of you for your helpful responses. If we follow best practices mentioned like trying to centralize code in Page 0, db packages/procedures, JS libs shared components (especially "Shared App" having Shared components between multiple apps) we can minimize code management efforts and use existing technologies to identify, merge, promote code changes. This still leaves with some code and changes that will localized to individual pages (and we still need to manage page 0 and Shared object code changes. I will explain what I am trying to say with an example below about managing changes in a page.
Przemek, and Jerry,
How are you identifying, managing and promoting changes between applications environments say TEST to PROD. For example we have 2 separate dbs (and hence workspaces) to host Apex TEST and Apex PROD environment. If I have modified page 15 in TEST and now need to promote changes made to page 15 (deltas) to PROD how do I compare and identify the deltas? Apex can not migrate the whole page across apps in different workspaces and even if Apex can I don't think it is a good idea to overwrite page 15 in PROD with page 15 in TEST unless we can compare them, identify the deltas and make sure the changes are what we intended to promote. Exporting pages and comparing using a text editor is time consuming because of various ids and the way New Line characters can get embedded in page export. Logic that the TEST env should have identical copy of prod due to a refresh before promoting changes from DEV won't help because then whole of above will apply between DEV and TEST (albeit with little less risk as the target is TEST and hopefully any unintended changes will be caught during testing).
Apex 3.1 has Apex Applications Compare facility? If you have used it, what is your take on it? I think it is too basic but a good start. Won't it be good if there was a nice full fledged compare tool for Apex objects?
Thanks
Paresh

Intel Matrix Storage Manager disables Windows Update and Windows Validation on Windows 7 64-bit

I have a Lenovo ThinkPad R61 8918CTO on which I did a clean install of Windows 7 Ultimate SP1 (64-bit) on a new Seagate Momentus XT 750GB drive. The installation was trouble-free, as were all of the post-install Windows Updates.
Then I installed ThinkVantage System Update 4.03 and used it to install most of the available Lenovo updates. Big mistake. I'll spare you a detailed account of the hours I wasted troubleshooting, rolling back to previous restore points, and doing more troubleshooting, but it turns out that installing Intel Matrix Storage Manager driver v. 8.9.2.1002 caused Windows Update and Windows Validation to fail.
Symptoms: Windows Update control panel can't check for updates and reports that the Windows Update service isn't running when it actually is. Online Windows Validation fails and the standalone Windows Validation utility won't install. Microsoft programs that require a validated copy of Windows (e.g., Microsoft Security Essentials) won't install.
Solution: Roll back the driver for the relevant SATA controller to the previous driver.
I've reinstalled ThinkVantage System Update 4.03 and hidden the proposed Intel Matrix Storage Manager update; since then, I've used it to complete my Lenovo updates without issue.
I hope this post will help other people with this problem find the solution a lot faster than it took me!

This happened after installing a new advanced format drive with 4k-byte sectors, I'd guess. If the storage driver doesn't report the physical sector size to Windows, update fails.
I just ran across this myself (again) putting Win 7 on a T400.
I don't know why this is still going on. It may be that the update lists for older machines still have pre-AF-drive drivers listed.
FYI, another fix is going to the Intel site and installing the latest Matrix Storage Manager AHCI driver. This may be more desirable than rolling back to an older driver in some cases.
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

XML Validation in PI 7.1 - Restart and skip validation possible, but how?

Hello all,
I read about schema validation in PI 7.1 and did a few tests on my own, but could not restart and skip validation for invalid payloaded messages. The documents say it is possible.
Anyone know how? Thanks.
BTW, I really think putting the schemas in server file system will cause a lot of authorization trouble in enterprises. No one gives access to the server filesystem and I don't think they will also like to open the required subdirectories for share. Asking the basis team to create the folder structures and maintaining schemas would be another pain. Don't you also think that SAP could find a better approach, like automatically uploading the schemas to the filesystem, or validating them from repository directly if possible?
Kind regards,
Gökhan

Hi Gökhan,
I am facing the same issue.
I set up outbound xml validation in receiver agreement and tested it with valid and invalid messages.
The validation works fine.
But in case of validation error I tried to restart with skipping the validation. But this wasn't possible.
I am always facing the same valdiation error.
I already tried all different tools I know (sxi_monitor, message monitoring in rwb and in nwa)
I am working on PI 7.11 SP6
Did you find a solution for skipping the validation for a single message out of the monitoring?
I know that there is the possibility of deactivate the validation in receiver agreement but thid doesn't meet the requirement of skip the validation only for a single message.
Maybe anyone else faced and solved this issue already.
Thanks in advance
Jochen

Many pages and complex data model in JHS app

I am using JHS to create an application containing data that is structured something like:
- Country
- Company
- Department
- Employee
- Payments Details
I have created entity and view objects corresponding to each of these and the appropriate accessors/view links. We need the user to be able to search, work on data and 'drill down' from any level (not always starting with company). In order to make this possible my JHS application has 5 'top level' tabs corresponding to each of the above entities. From each of these top level pages users can drill down to the children.
This works but we end up with many pages and a large data model with lots of replication and nesting.
Country - 5 pages
Company - 4 pages
Department - 3 pages
Employee - 2 pages
Payments - 1 page
total 15
You can picture how the data model is structured. Obviously this is a very simple example but I hope it illustrates my concerns. We have so many pages that post-generation changes are going to be difficult to manage. I'm also worried about the size and complexity of the data model. In this case views are almost all entity based so I guess the data is only cached once but supposing they were not?
Are we using JHS in the best way ? perhaps I'm overcompilcating it ?
I have started to rewrite the JHS generated application so that it (almost) always reuses the same top level generated pages (with some modifications). When the user wants to navigate to a child I modify the whereClause of the target ViewOjbect appropriately, reexecute it and forward to the corresponding 'top level' page. This approach seems to work well, cuts down the number of pages enormously and simplifies the data model (and has enabled me to put breadCrumbs in).
In doing this though, am I creating work for myself that JSH could have done if we had used it differently in the fist place?

This sounds like a valid approach in your situation. We have been playing with the idea of having something like 'Group Links' where you can generate navigation items from one group to the other. Then, you would need to have one, 5 level deep nested group, and 4 other top level groups to provide the search&select on each of the nested groups, but they themselves would not need to have nested groups, but a navigation link to the nested groups in the 5-level deep group.
Although nice and simple in theory, the details are a bit tricky to work out with all the possible layout- and samePage settings, so we have not implemented this yet. So your approach seems a valid one. If you have any suggestions on a way to generate what you are now doing manually, we'll be interested.
Kind regards,
Peter Ebell
JHeadstart Team

HTTPS SharePoint site with HTTPS Provider hosted app - The remote certificate is invalid according to the validation procedure

We have SharePoint 2013 site configured with SSL and we have developed a provider hosted app which interacts with SharePoint list.
If we try accessing the Provider hosted app from the SharePoint site with HTTP [http://mysharepointsite.com/] there are no any errors thrown.
But whenever the same Provider hosted app is tried accessing from the same SharePoint site using https address
[https://mysharepointsite.com/] we are getting below error:
The remote certificate is invalid according to the validation procedure.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Security.Authentication.AuthenticationException: The remote certificate is invalid according to the validation procedure.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[AuthenticationException: The remote certificate is invalid according to the validation procedure.]
System.Net.Security.SslState.StartSendAuthResetSignal(ProtocolToken message, AsyncProtocolRequest asyncRequest, Exception exception) +2983172
System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest) +473
System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest asyncRequest) +86
System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest) +262
System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest) +473
System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest asyncRequest) +86
System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest) +262
System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest) +473
System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest asyncRequest) +86
System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest) +262
System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest) +473
System.Net.Security.SslState.ForceAuthentication(Boolean receiveFirst, Byte[] buffer, AsyncProtocolRequest asyncRequest) +8530566
System.Net.Security.SslState.ProcessAuthentication(LazyAsyncResult lazyResult) +230
System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx) +645
System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx) +9
System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state) +87
System.Net.TlsStream.ProcessAuthentication(LazyAsyncResult result) +1467
System.Net.TlsStream.Write(Byte[] buffer, Int32 offset, Int32 size) +84
System.Net.PooledStream.Write(Byte[] buffer, Int32 offset, Int32 size) +22
System.Net.ConnectStream.WriteHeaders(Boolean async) +761
[WebException: The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel.]
System.Net.HttpWebRequest.GetResponse() +8534156
Microsoft.SharePoint.Client.SPWebRequestExecutor.Execute() +58
Microsoft.SharePoint.Client.ClientRequest.ExecuteQueryToServer(ChunkStringBuilder sb) +975
ProviderHostedHTTPSWeb.Default.Page_Load(Object sender, EventArgs e) +348
System.Web.UI.Control.LoadRecursive() +71
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +3178
We have already added the certificate used for the SharePoint site and the provider hosted app in the SharePoint central admin trusts.
Any idea's how can I resolve this issue?

Hi,
According to your post, my understanding is that you failed to access provider host app using https.
The reason for this is that SharePoint implements its own certificate validation policy to override .NET certificate validation.
Fix is to setup a trust between SharePoint and the server requiring certificate validation.
For more information, you can refer to:
http://blogs.technet.com/b/sharepointdevelopersupport/archive/2013/06/13/could-not-establish-trust-relationship-for-ssl-tls-secure-channel.aspx
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Differentiate between Simple, Medium and Complex Queries.

Hi Gurus,
I am a Tech. Architect on this new project. I would like to know how to differentiate between Simple, Medium and Complex Queries in BW because I need this info to work on the Estimates. Has this differentiation got anything to do with the Backend config also?
Thanks in Advance.
Chandu.

Hi
You need to understand the requirements and consider the following before you classify........
1) Queries that are based on multiple key figures--which may result in cell definition.
2) Queries with complex calculations.
3) Queries that are based on Variable Exits
Regards
Srinivas Bandi

Validation Procedures, discrepancy for received dcm

Hi,
I'm creating a validation procedure where I should get a discrepancy if the CRF page is blank, however, using the HAS_DATA doesn't work at all here and the discrepancy doesn't come up. I have the RECEIVED DCM with status RECEIVED and...I'm not sure but is it possible to show a discrepancy when the status of the RECEIVED DCM is 'RECEIVED' ? or do they have to have PASS status so OC will show the discrepancy and information related?
Thanks
Edited by: user10312383 on Dec 9, 2010 3:06 PM

Hi,
I'm creating a validation procedure where I should get a discrepancy if the CRF page is blank, however, using the HAS_DATA doesn't work at all here and the discrepancy doesn't come up. I have the RECEIVED DCM with status RECEIVED and...I'm not sure but is it possible to show a discrepancy when the status of the RECEIVED DCM is 'RECEIVED' ? or do they have to have PASS status so OC will show the discrepancy and information related?
Thanks
Edited by: user10312383 on Dec 9, 2010 3:06 PM

Complex "validation rule" using Java Bean code

Hi,
I have never used validation rules with jdeveloper, but i need a complex validation rule of one column of my table.
Can i put a "validation rule" on an attibute of a view object, or on a column of a table, that use Bean code ?
My column must contain different values depending of the other columns of the table, so i think i can't do this without java code...
I tried to doubleClick on the column to create a validator, but I have put a "Print" inside, and seen that it is executes lots of times, but I want to execute the validation only when the value of the column change !
How can I do this ? What do i need to use ?
Regards,
Trigger

I have use John's solution, it works well !
Sorry vinod_t_krishnan i am good with java but i don't know how to use well EL Expressions so I did not try your method...
The code if so is interested...
    public boolean validateOvpdOvprCode(String ovpdovprcode) {
        RowIterator ovRubrique = this.getOvRubrique();
        RowIterator ovRubriqueType = this.getOvRubriqueType();
        String modifiable = (String)ovRubriqueType.getRowAtRangeIndex(0).getAttribute("OvrtModifiable");
        String majuscule = (String)ovRubrique.getRowAtRangeIndex(0).getAttribute("OvruMajuscule");
        String type = (String)ovRubrique.getRowAtRangeIndex(0).getAttribute("OvruTypeDonnee");
        BigDecimal repMin = (BigDecimal)ovRubrique.getRowAtRangeIndex(0).getAttribute("OvruRepMini");
        BigDecimal repMax = (BigDecimal)ovRubrique.getRowAtRangeIndex(0).getAttribute("OvruRepMaxi");
        modifiable = modifiable.toUpperCase();
        majuscule = majuscule.toUpperCase();
        type = type.toUpperCase();
        BigDecimal ovprBD = null;
        if (modifiable.equals("N")) {
            errorMessage = "Ce champ n'est pas modifiable ! Actualisez la page pour réinitialiser sa valeur !";
            return false;
        } else {
            if (ovpdovprcode == null)
                return true;
            if (type.equals("N")) {
                float ovprInt = 0;
                try {
                    ovprInt = Float.parseFloat(ovpdovprcode);
                    ovprBD = new BigDecimal(ovprInt);
                } catch (Exception e) {
                    errorMessage =
                            "Ce champ est de type numérique, il ne doit contenir que des chiffres et un 'point'";
                    return false;
                if(repMin != null && repMax != null)
                    if(ovprBD.compareTo(repMin) == -1 || ovprBD.compareTo(repMax) == 1) {
                        System.out.println("4");
                        errorMessage = "La réponse doit être comprise entre " + repMin + " et " + repMax + ".";
                        return false;
            if (majuscule.equals("O"))
                if (!ovpdovprcode.equals(ovpdovprcode.toUpperCase())) {
                    errorMessage = "Ce champ doit comporter uniquement des majuscules";
                    return false;
            return true;
    }

Defining complex validations for flex items

Hi,
We've defined a flex regions and a number of flex items. We would like to define more complex validation logic at the entity object level, whereby we'd like to reference both 'fixed' entity attribute values as well as values of the flex items.
Could you please indicate how this can be achieved in the validateEntity method of the EntityImpl.java class.
We know beforehand which flex items will be displayed based on the value of one of the fixed entity attributes (e.g. if the attribute request_type='assist' then display flex items A and B, if request_type='info' then display flex items D, E and F). We use flex items because the number of request_types and corresponding 'dynamic' attributes is too large (and subject to frequent additions, deletions or modifications) to incorporate in a fixed static db table structure.
If you can suggest alternatives to using JHeadstart flex items, these are more than welcome, of course.
Many thanks beforehand,
Ibrahim

Dear Steven,
First of all many many thanks for your prompt reply. We can use JSF EL expressions to conditionally render flex items. I'd like to illustrate my question with a simple example:
We have three fixed entity attributes displayed:
RequestType
Birthday
Sex
and two flex items (rendered at runtime for a specific runtime value of RequestType):
Smoker (Y/N)
Weight
Before saving the record I'd like to check a number of validation business rules that depend on the fixed entity attributes as well as the two flex items being displayed.
Consequently, I'd need to be able to access the flex item values provided by the user, inside my validateEntity method (right ?).
I can define simple validations for the flex items, but I can only access the flex item value and possibly the DependsOnItemValue.
PS: When I define a flex item of type 'inputtext' and try to access its value using a bind variable in the validation query of the flex item e.g.
:ItemValue = 'blabla'
Suppose the user fills in the value Abracadabra, the validation logic substitutes as follows:
Abracadabra = 'blabla' (which generates an Oracle error). I'd expect the following substitution to take place:
'Abracadabra' = 'blabla'

The etag value \'\"1\"\' specified in one of the request headers is not valid. Please make sure only one etag value is specified and is valid.

I try to receive data from a SharePoint List by using REST Services. (_vti_bin/ListData.svc)
This approach worked fine for some days, until I get an error 400 with following error message:
"The etag value 1 specified in one of the request headers is not valid. Please make sure only one tag value is specified and is valid."
Hope anybody can help.
Many thanks in advance.

Hi,
According to your post, my understanding is that you had an issue about retrieve data form list using REST in SharePoint 2010.
I had created a simple demo to retrieve a list item, you can check with the following code snippets.
<script src="http://code.jquery.com/jquery-1.10.2.min.js" type="text/javascript"></script>
<script type="text/javascript">
_spBodyOnLoadFunctionNames.push("callCSOM");
function callCSOM()
$("#Button1").click(function()
ExecuteOrDelayUntilScriptLoaded(ready, "sp.js");
function getListItemById(webUrl,listName, itemId, success, failure) {
var url = webUrl + "/_vti_bin/listdata.svc/" + listName + "(" + itemId + ")";
$.ajax({
url: url,
method: "GET",
headers: { "Accept": "application/json; odata=verbose" },
success: function (data) {
success(data.d);
error: function (data) {
failure(data.responseJSON.error);
function ready(){
getListItemById('http://sp','ListB',2,function(data){
alert(data.Title);
function(error){
console.log(JSON.stringify(error));
</script>
<input id="Button1" type="button" value="Run Code"/>
Thanks,
Jason
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Jason Guo
TechNet Community Support

How to grant "Write ServicePrincipalName" and "Write validated SPN" rights to the directory for service account

Hi ,
How can I grant "Write ServicePrincipalName” and “Write validated SPN” rights to the directory for service account or computers?
Shailendra
Shailendra Dev

Right-Click on the OU and select Properties
Select the "Security" tab
Select the "Advanced" tab
Select the "Add" button
Enter the security principal name
security principal
Ok
Properties tab
Apply to:
Descendant User objects
Permissions:
Read servicePrincipalName - Allow
Write servicePrincipalName - Allow
Ok
Ok
Ok
Paul Bergson
MVP - Directory Services
MCITP: Enterprise Administrator
MCTS, MCT, MCSE, MCSA, Security, BS CSci
2012, 2008, Vista, 2003, 2000 (Early Achiever), NT4
Twitter @pbbergs http://blogs.dirteam.com/blogs/paulbergson
Please no e-mails, any questions should be posted in the NewsGroup.
This posting is provided AS IS with no warranties, and confers no rights.

Difference between IS and AS in procedure?

difference between IS and AS in procedure?

prakash wrote:
hi,
http://www.oracle.com/pls/db111/portal.portal_db?selected=5&frame=#sql_and_pl_sql_languages
Here you get everything ..
functionality wise there is no difference between IS , AS of a procedure .
Thanks,
P PrakashI think oracle document do not talk about the Difference or No Difference between IS and AS. So i feel this is not a question that need to be pointed to the document.
To OP
Basically as others said there is no difference between them. They are just gramatical representation.
For example when i create a standalone stored procedure i tend to use AS and when i create a procedure inside a package i tend to use IS. Its just the choice you can make.

Advanced and complex validation procedures

Similar Messages

Maybe you are looking for