Advanced mapping requirement!
Hi Crew,
I need the mapping logic to acheive this target structure from the source structure.
Source Structure:
<Pen>
<colour>Red</colour>
<company>Parker</company>
<type>Refill</type>
</Pen>
Target Structure:
<Pen>
<character>
<no>1</no>
<name>colour</name>
<value>Red</value>
</character>
<character>
<no>2</no>
<name>company</name>
<value>Parker</value>
</character>
<character>
<no>3</no>
<name>type</name>
<value>Refill</value>
</character>
</Pen>
Kindly help!
Thanks in advance
karthik kaveriselvan
Karthik,
First let me confirm your structure.
Source
<Pen> 0..Unbounded
<color/>
<company/>
<type/>
</Pen>
Target
<Pen>0..Unbounded
<character>0..Unbounded
<no/>
<name/>
<value/>
</character>
</Pen>
If you think i'm correct, then proceed with below logic.
In Mapping editor Right click on <character> and click duplicate sub-tree three times.
Now follow the logic.
Pen -
>Pen.
character(1 occurrence)
Constant[1] -
> no
Constant[colour]----->name
colour -
> value
Character(2 occurrence)
Constant[2] -
>no
Constant[Company]----name
company---->value.
Character(3 occurrence)
Constant[3]---->no
Constant[Type]---->name
type--->value.
Hope it helps!!!!
Best regards,
raj.
Similar Messages
-
XSLT mapping requirement.. Only numbers need to be picked..!!
Hi ,
XSLT mapping requirement.
I will be getting the value as mix of numbers and alphabets like " 1343: -BIZ USA ".
I need to pick only number '1343' from the input field.
Is there any function in XSLT to pick only numbers and ignore alphabets?
Thanks
DeepthiHi There,
The below piece of code could cater your requirement, for flltering the non digit chars from your field,
<xsl:value-of select="translate(<your field name>, translate(<your field name>, '0123456789', ''), '')"/>
This would separate the non numeric chars from your field in mapping.
Let me know this works.
Regards,
Rajesh Kumar T -
Mapping requirement about grouping with restriction
Hi,experts:
There is a complex mapping requirement.
There are 2 document types(A and B) in the source records.
I need collect the amount with the document which is type A.
The source records are as follows:
Doc_No Doc_Type Doc_Itm_No Amount
0001 A 0010 3
0001 A 0020 4
0002 B 0010 5
0002 B 0020 6
0003 A 0010 11
0003 A 0020 22
The target records should be:
Doc_No Doc_Type Amount
0001 A 7
0003 A 33
The source and the target data type are the same as follows:
Documents 1...unbound
---Doc_No 1...1
---Doc_Type 1...1
---Doc_Itm_No 1...1
---Amount 1...1
Q1: How to create the target top node(Documents) with restriction(Doc_Type = 'A')?
Without the restriction,i can handle it well as follows:
removecontext(Doc_No)->sort->splitbyvalue(value changed)->collapsecontexts->Documents
Q2:How to collect the amount?
Regards
Minghi ming,
do this mapping
Q1: How to create the target top node(Documents) with restriction(Doc_Type = "A")?
Doc_type-->(if equals "A")>(remove context)-->(createif)----->Documents
q2. How to collect the amount?
Doc_type(Documents context) + Amount(Document's context)--->UDF1>(SplitByValue)->Doc_type
Doc_type(Documents context) + Amount(Document's context)--->UDF2>(SplitByValue)-->Amount
//****************************UDF1***********************//
public void get_batch_name(String[] Doc_type,String[] Amount,ResultList result,Container container){
//write your code here
Hashmap myHashmap=new Hashmap();
for(int i=0; Doc_type.length(), Amount.length())
if(myHashmap.get(Doc_type<i>==null))
{myHashmap.add(Doc_type<i>, Amount<i>);}
else
String amt= amt+myHashmap.get(Doc_type<i>);
myHashmap.put(Doc_type<i>,amt);
Set s=myHashmap.keySet();
Iterator i=s.iterator();
while(i.hasNext())
result.addValue(i.next());
//********************UDF2***************************//
public void get_batch_name(String[] Doc_type,String[] Amount,ResultList result,Container container){
//write your code here
Hashmap myHashmap=new Hashmap();
for(int i=0; Doc_type.length(), Amount.length())
if(myHashmap.get(Doc_type<i>==null))
{myHashmap.add(Doc_type<i>, Amount<i>);}
else
String amt= amt+myHashmap.get(Doc_type<i>);
myHashmap.put(Doc_type<i>,amt);
Arraylist s=myHashmap.values();
String array[]=s.toArray();
while(int i=0;i<array.length();i++)
result.addValue(array<i>);
Message was edited by: self
sudeep dhar -
Mapping requirment based on field value
Hi All,
I have a mapping requirement
where in the file i have a 2 AM records as shown
AM U 00000000000010000C
AM X 00000000000120000
Based on AM-03 field i..e,, AM-03 = 'C'
then to the target field i need to pass the value(00000000000120000) of next AM02 record.
so when ever AM03 filed is 'C' then i need to pass the value of next AM record.
can any body suggest me how i it can be acheived.
Thanks
Sai_SHAi am not sure whether i have understood ur req correctly or not..
but u can chk this UDF in ur mapping:
execution type: all values of a context
if(var1[0].equals("C"))
result.addValue(var2[1]);
filed3---removecontext
UDF----target
field2---removecontext -
Advanced mapping from IDOC to SOAP with reversed 3 level context change
Hi everyone.
I am having a though time mapping the HRMD_A01 IDOC into a SOAP message. The reason is that the reciever expects an xml structure where the root node is cost center instead of employee which is the case in the IDOC.
Mapping from:
IDOC (1..1)
E1PLOGI (1..unb)
SEGMENT (String)
OBJID (String)
E1PITYP (1..unb)
E1P0001 (1..unb)
SEGMENT (String)
KOSTL (String)
To this structure:
List (1..1)
CostCenters (1..unb)
KOSTL (String) ----> Mapped against KOSTL above
Employees (1..unb)
OBJID (String) ----> Mapped against OBJID above
I expect several occurances of E1PLOGI which states multiple employees sent in the IDOC. I also expect several occurences of E1P0001 containing cost centers.
My conclusion is that I need an advanced mapping and I have created one which collects all KOSTL for the IDOC context, deletes duplicates, and creates the CostCenters segment. This is now working. But my problem is that I can't create the employees segment in the right place. They are only created once under the first CostCenters node.
Here's the java-code for mapping between KOSTL and CostCenters/KOSTL:
public void costCenters(String[] var1, ResultList result, Container container) throws StreamTransformationException{
Set set = new HashSet(Arrays.asList(var1));
String[] array2 = (String[])(set.toArray(new String[set.size()]));
Arrays.sort(array2);
for (int i = 0; i < array2.length; i++) {
result.addValue(array2<i>);
Any ideas on how to proceed?
Best RegardsHi,
Do the mapping like below.
UDF should be select as context.
List (1..1)
CostCenters (1..unb)
KOSTL (String) ----> Mapped against KOSTL above
Employees (1..unb)
OBJID (String) ----> Mapped against OBJID above
Mapping:
KOSTL(RightSelectChange the context to E1PITYP)--UDF--Removecontext--CostCenters
KOSTL(RightSelectChange the context to E1PITYP)--UDF--SplitbyValue(Each Value)--KOSTL
constant---Employees
OBJID----------------------------------------------Use One As Many---SplitByValue (EachValue)----------OBJID
KOSTL(RightSelectChange the context to E1PITYP)--UDF---
KOSTL(RightSelectChange the context to E1PITYP)--UDF---
Regards,
Prakasu.M
Edited by: prakasu on May 20, 2009 3:28 PM -
Mapping Requirement for File to IDOC
Hi All,
I have a requirement related to Mapping and need your help on this. There is a financial posting Interface and the data is being fetched from database using strored procedure.
The source file is having structure like as shown below
<FIExport>
<resultset>
<row>
<headerid>12345</header id>
<field2>5</field2>
<field3>1</field3>
<field4>29</field4>
<field5>3</field5>
</row>
<row>
<headerid>12345</header id>
<field2>5</field2>
<field3>1</field3>
<field4>48</field4>
<field5>3</field5>
</row>
<row>
<headerid>12345</header id>
<field2>5</field2>
<field3>1</field3>
</field4>
<field5>3</field5>
</row>
<row>
<headerid>12346</header id>
<field2>5</field2>
<field3>1</field3>
<field4>2</field4>
<field5>3</field5>
</row>
<row>
<headerid>12347</header id>
<field2>5</field2>
<field3>1</field3>
<field4>2</field4>
<field5>3</field5>
</row>
</resultset>
</FIExport>
Condition:
For creating target structure follwoing conditions are required
1) IDOC at receiver side will be created as per unique header id therefore in the current source structure 3 Idocs will be created for 3 unique header id like 12345 , 12346 , 12347
2) Target EIFISEG which is line item will be created based on per row per unique header id under each IDOC and there has to be 2 SEGMENTS (2A & 2B ) per row based on the VAT amount presence and also two additional E1FISEG has to be created statically per idoc for BSCHL = 34
so for the above source structure the target should have number of EIFISEG as follows:
As there are 3 rows for header id 12345, therefore under IDOC1 the number of EIFISEG will be
since VAT Amount(field 4) is present therefore for 2rows of 12345 header id IDOC it will generate 2X2=4 , E1FISEG segments (each for 2A & 2B) and 1 E1FISEG for 3 row of header id IDOC 12345.
In addition to this 2 additional segment will be created for BSCHL=34( it's duplicate segment of E1FISEG, so no issues in this)
Total number of E1FISEG segments in IDOC for header id(12345) will be = 4 + 1 + 2 = 7 segments
Similarly for IDOC with header id (12346) the total number of EIFISEG will be = 2( 2A & 2B as vat amount (field 4) is present + 2(bschl =34) = 4 segments
Similarly for IDOC with header id(12347) the total number of E1FISEG will be = 2( 2A & 2B as vat amount (field 4) is present + 2(bschl =34) = 4 segments
So the target strcuture should look like:
Target Structure
IDOC1 for header id= 12345
E1FIKPF
field 1
E1FISEG1
field 2
E1FISEG2
field 2
E1FISEG3
field 2
E1FISEG4
field 2
E1FISEG5
field 2
E1FISEG6
field 2
E1FISEG7
field 2
IDOC1 for header id= 12346
E1FIKPF
field 1
E1FISEG1
field 2
E1FISEG2
field 2
E1FISEG3
field 2
E1FISEG4
field 2
IDOC1 for header id= 12347
E1FIKPF
field 1
E1FISEG1
field 2
E1FISEG2
field 2
E1FISEG3
field 2
E1FISEG4
field 2
Please help me to complete this mapping requirement as it seems to be complex.
Thanks & Regards
PrabhatHi,
There was one typo mistake, the TARGET structure will be
Target Structure
IDOC1 for header id= 12345
E1FIKPF
field 1
E1FISEG1
field 2
E1FISEG2
field 2
E1FISEG3
field 2
E1FISEG4
field 2
E1FISEG5
field 2
E1FISEG6
field 2
E1FISEG7
field 2
IDOC2 for header id= 12346
E1FIKPF
field 1
E1FISEG1
field 2
E1FISEG2
field 2
E1FISEG3
field 2
E1FISEG4
field 2
IDOC3 for header id= 12347
E1FIKPF
field 1
E1FISEG1
field 2
E1FISEG2
field 2
E1FISEG3
field 2
E1FISEG4
field 2
Thanks & Regards
Prabhat -
IS Mapping required in JDBC to PROXY asynchronous scenario?
Hi,
I am working on JDBC to PROXY asynchronous scenario. The scheduled stored procedure fetches the data from database tables and stores them in staging table in the same database. XI will fetch the records via JDBC adapter. Now these records are to be posted into SAP custom table via proxy without any transformation. Now is Message mapping and Interface mapping required in this case?Hi
I assume that your source and traget structure will be different as you are using JDBC.
SO you will need to create message mapping and operation mapping.
-Deepak. -
Dear all,
I have a mapping requirment based on IDOC Segment to SOAP.
My IDOC Structue is like this:
Source Target
segement1:
itemA
itemB
itemC ID
itemD
Segement2:
itemD
itemE Description
itemF Value
Based on ItemF ,if its value is 00 then get itemC from Segement1 and itemE from Segement2 and map to target as ID and Desciption .
Please provide me the graphical mapping design.
Regards
Vsantoshcan u provide me some more information like
if ItemF value is 00 then ur trying to get the data from the two fields from the source side ,
what do u want to do with those two values (means u want concatnate or what) and
if itemf value is not queals to 00 then what to do ....... -
Hi All,
I am having a mapping requirement. A comma separated string is coming in the source field and i have to split the value
and map the target fields.
For example:
Source:
<Row>123,BOFA,Success,True</Row>
Output
<Target>
<A>123</A>
<B>BOFA</B>
<C>Success</C>
<D>True</D>
</Target>
I am using UDF for the same but getting an exception.
Please help.
Thanks!!Hi,
Are there only one row or multiple rows in source XML? Then mapping the root is also necessary. Secondly if we look at this XML
<Target>
123 BOFA <C>Success</C>
<D>True</D>
</Target>
The value "123 BOFA" is expected to be within XML tag as shown below
<Target>
<A>123 BOFA</A>
<C>Success</C>
<D>True</D>
</Target>
Could you please kindly mention the version of PI you are working in.
Anyways you can use the following UDF to meet your requirements. For each field in target, u need separete UDF. The value of variable "i" is only to be altered for each target field.
public String UDF(String a,Container container)
String s[]=new String[3];
int i=0;
try
String tgt[]=a.split(",");
//first field value
s[0]=tgt[0]+" "+tgt[1];
//second field ("C") value
s[1]=tgt[2];
//third field ("D") value
s[2]=tgt[3];
catch(Exception e)
e.printStackTrace();
//value of i decides which field you want to populate for first field i=0 so on and so forth
i=0;
return s<i>;
Hope this solves your problem.
regards
Anupam -
Suppose i am GRN for today, at the time of checking or saving the GRN, a popup for advance intimated required which help us to plan the next GRN accordingly.
Regard
NabilIn MIGO , there is a search Icon (binocular) , its labelled "Search for PO" . if you use that search, then you can search for all expected receipts w.r.t delivery dates for that plant.
if that report isnt sufficient, then you will have to go for a development , use the BADI MB_MIGO_BADI , and add your logic w.r.t the Tables EKPO and EKET . -
"LUN Map requires repair" on re-start
All,
I have been having this problem for several months. I work in a facility where shutting down everything over the weekend is required. One of those devices is an XServe RAID. When it comes back up one side always fails with the message "LUN map requires repair". Additionally, the same controller that exhibits this issue is also unable to accept time updates, and displays an extremely odd date (e.g. 1/30/16). I have attempted re-seating the controller (nothing) and swapping controllers (the problem followed). Anyone have any ideas?
It's an XServe RAID running firmware 1.5.1/1.5.1c
Thanks.
Mac OS X (10.3.9) XServe RAID firmware 1.5.1/1.5.1cWhat's your "shut down" process? Are you turning off all attached computers, or at least unmounting the RAID volumes, and the shutting down the RAID using the RAID Admin tool?
Does the power get physically cut during this down time?
Why is shutting down necessary? And any chance of getting an exception?
=Tod -
Suggestion/opinion in scenario mapping required-PLEASE
Hi,
I have a typical retail scenario and I seek expert suggestion opinion on this.
In a scenario where materials are purchased from different vendors and received.
Later they are sold to customer/s through direct selling or mass market and also sold to other company of the group via ICT process at the cost.
Goods are also transferred to other company via ICT process.
These goods are having different combination while they are being sold.
To give a classic example:
Company orders for say pens of different size and different colors each defined as a different mat code.
They are ordered in hugh quantities and sold in the mass market either in several quantity or a single piece.
Most often what happens is that looking at the market trend company packs different types of pens in one pouch and sell them either through mass market or through consignment.
Sometimes they create hugh quantity of packs in anticipation that they will get sold.
However it also happens that some customer is interested in buying those packs in bulk quantities but only thing that he insists is that he wants to have a different type of pen out of several pens in the pouch already created.
Suppose a pack consists of pens of same type but of colors black,blue,green and all having differerent material codes.
Customer is intersested in buying this pack in bulk quantity but his only requirement is that instead of balck he would like to have a red pen in each pouch.
Company does not want to lose this customer at any cost since he has shown interest in buying a very hugh quantity.
This is one of the typical examples and this type of things are very common in such type of retail business.
<i><b>Our scope is very limited in the sense that we have to map this business right from procurement to sell with standars MM/SD/FI functionality.</b></i>
There are hundreads of businesses who run similarly and have implemented SAP.
In the given context I need opinion from you experts on how to map following scenarios
1..How to create pouches/value packs
2..How to change the combinations if a specific customer requirement comes to alter the combination as stated above
3..how to handle returns.
Our approach:
For creating pouches/packs, we are planning to use MM subcontracting functioanality whereby packs will be created inhouse but will be treated as subcontracting by having a logical vendor created in the system.
<b>We have restricted the creation of packs to one level BOM only</b> and also we will restrict creation of BOM to one instance only so that we will not have any alternate BOM created for the same parent material(separate item code that we will be creating for the entire pack) and child materials(different types of pens with aseparate material code) combination.
This will ensure that if already a pack has been created with the combination of components mentioned above ,system will not allow if someone tries to create another pack for the same parent child combination.
Meaning that there are no versions available & tracking becomes easy.
The only worrying factor is that these types of pack creation activity(value packs) is very frequent in this type of business.
Users will not accept to create a different material for the value pack and subsequently to create bom and then do subcontracting to have the stock <i><b>every now and then</b></i>.
<u><i><b>Also how to handle the issue of changing the component of an already created pouch.</b></i></u>
Has anyone mapped such types of things in standard functionality of MM SD.If so request you all to share your suggestions/views on this.
Thanks in advance
arjmanHi,
There are 3 companies i.e., ABC, X123 & Y789.
1. Create a service contract in ABC for X123 as Service Provider. Prerequisite is Create X123 as the vendor in ABC company.
2. Create the Service order based on that in ABC.
3. Create a service contract in X123 for Y789 as Service Provider. Prerequisite is Create Y789 as the vendor in X123 company.
4. Create the Service order based on that in X123.
Then do the normal proceedings. Correct me if I am wrong.
Regards,
Maheswaran. -
Hi,
I have a requirement where I want to transform the incoming XML from one structure to another (basically dropping the namespaces/prefixes etc but keeping the structure) and have reached the conclusion this can be achieved using an XSLT mapping.
Hoowever, can you please point me in the irection of some good websites that have good XSLT examples and code snippets ?
Thanks
Colin.Hi Colin,
I have done some simple scenario regarding this XSLT mapping.This is the simple piece of code tat i have executed.Hope it will be helpful to you.And refetr to w3schools.com for more info.
?xml version="1.0" encoding="UTF-8"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:template match="/">
<MT_EMP_TARGET>
<xsl:for-each select="//EMP_DATA">
<EMP_DATA>
<xsl:variable name="fname" select="//EMP_DATA/First_Name"/>
<xsl:variable name="lname" select="//EMP_DATA/Last_Name"/>
<Emp_Code><xsl:value-of select="//EMP_DATA/Emp_Code"/></Emp_Code>
<Name><xsl:value-of select="concat($fname,' ',$lname)"/></Name>
<Join_Dt><xsl:value-of select="//EMP_DATA/Join_Dt"/></Join_Dt>
<Designation><xsl:value-of select="//EMP_DATA/Level"/></Designation>
<Dept><xsl:value-of select="//EMP_DATA/Dept"/></Dept>
</EMP_DATA>
</xsl:for-each>
</MT_EMP_TARGET>
</xsl:template>
</xsl:stylesheet>
And here is my input data:
?xml version="1.0" encoding="UTF-8"?>
<MT_EMP>
<EMP_DATA>
<Emp_Code>2994</Emp_Code>
<First_Name>Gary</First_Name>
<Last_Name>Moore</Last_Name>
<Join_Dt>02/21/05</Join_Dt>
<Dept>SAP</Dept>
<Level>P3</Level>
</EMP_DATA>
<EMP_DATA>
<Emp_Code>2995</Emp_Code>
<First_Name>Dolly</First_Name>
<Last_Name>Smith</Last_Name>
<Join_Dt>12/11/06</Join_Dt>
<Dept>CSD</Dept>
<Level>P4</Level>
</EMP_DATA>
<EMP_DATA>
<Emp_Code>2996</Emp_Code>
<First_Name>Sam</First_Name>
<Last_Name>Brown</Last_Name>
<Join_Dt>04/01/05</Join_Dt>
<Dept>Java</Dept>
<Level>P3</Level>
</EMP_DATA>
<EMP_DATA>
<Emp_Code>2997</Emp_Code>
<First_Name>Kim</First_Name>
<Last_Name>Larson</Last_Name>
<Join_Dt>02/02/06</Join_Dt>
<Dept>SAP</Dept>
<Level>P3</Level>
</EMP_DATA>
</MT_EMP>
Cheers,
Prasanthi. -
A common requirement is sending a table from SAP to be output into a file. So if this is done using the RFC sender adapter and File receiver adapter (with content conversion), the only thing required is a mapping to remove the extraneous <item> node that is inserted when a table is sent in a RFC parameter.
For example, if I send a table say ZTEST, the data coming into XI will be like this..
<RFCname>
<ZTEST>
<item>
<fld1>hello</fld1>
<fld2>world</fld2>
</item>
<item>
<fld1>second</fld1>
<fld2>time</fld2>
</item>
</ZTEST>
But since for the file adapter content conversion we require up to two hierarchical levels at the most, we have to drop the <ZTEST> node and get to
<RFCname>
<item>
<fld1>hello</fld1>
<fld2>world</fld2>
</item>
<item>
<fld1>second</fld1>
<fld2>time</fld2>
</item>
and then the receiver FILE adapter can handle to display these rows in tabular comma separated format.
The question is:: Is it possible to drop the node like above without doing any mapping in the IR i.e in that case we would only need a ID scenario where somehow (maybe by some simple existing adapter module usage) the input message (RFC type) is directly output in a flat file.Hi James,
Please check the following link, which will resolve your problem.
/people/shabarish.vijayakumar/blog/2007/08/03/file-adapter-receiver--are-we-really-sure-about-the-concepts
i hope, for your structure the FCC parameters for receiver file adapter as mentioned below.
Ztest.fieldSepartor :'nl'
item.fieldnames:fld1,fld2
item.fieldFixedlengths:5,5
item.fieldSeparator:' '
regards
mahesh. -
Flat File to IDOC Mapping requirement to generate Multiple Segments
Hi Experts,
I got a requirement were i have 2 records in a file and i need to generate 2 IDOCs with multiple segments in it.
FILE :
10/01/2010 101 KRNA ic_quantity 30-0257 3526 1 1 ea 110000 10
10/01/2010 101 KRNA ic_quantity 90-0005 3526 1 2 ea 110000 10
Idoc should generate 2 IDOCs with multiple segments as shown below
I have imported the IDOC and changed the occurrence to " unbounded "
The Basic IDOC Type : WMMBID02
I need to generate Multiple segments of E1MBXY1
i.e.., First IDOC should contain two E1MBXY1 segments
Second IDOC should contain Four E1MBXY1 segments
IDOC1 : WMMBID02
Segment : E1MBXY1( 2 segments)
10/01/2010 101 KRNA ic_quantity 30-0257 3526 1 1 ea 110000 10
10/01/2010 101 KRNA ic_quantity 90-0005 3526 1 2 ea 110000 10
IDOC2 : WMMBID02
Segment : E1MBXY1 ( 4 segments)
10/01/2010 101 KRNA ic_quantity 30-0257 3526 1 1 ea 110000 10
10/01/2010 101 KRNA ic_quantity 30-0257 3521 1 1 ea 110000 10
10/01/2010 101 KRNA ic_quantity 90-0005 3526 1 2 ea 110000 10
10/01/2010 101 KRNA ic_quantity 90-0005 3521 1 2 ea 110000 10
Can anyone suggest me how to generate IDOCs with multiple segments
what are multiple ways of generating it
Whether it can be achieved using Multi-mapping or I need go for UDF
If any one has done has done this type of requirement ,please share the points.
Thanks
SaiBasically you need to generate idoc per record in the flat file. During fcc conversion you convert flat file to xml structure at the sender side. In the mapping use xml file structure source and idoc as receiver structure. You just export idoc and update the idoc segment 1 to unbounded. Please follow the michael blog for file to idoc multimapping without bpm. Yes without bpm it is possible.
see this link... This will answer your requirement.
https://wiki.sdn.sap.com/wiki/display/XI/File%20to%20Multiple%20IDOC%20Splitting%20without%20BPM
>Whether it can be achieved using Multi-mapping or I need go for UDF
you dont need udf for this.
Maybe you are looking for
-
VMware Fusion Performance: Bootcamp Partition or Virtual Machine?
I'd like to run ArcGIS 9.3 in Windows XP using VMware Fusion. Can anyone comment on the virtues/drawbacks of using a bootcamp partition versus creating a VMware "Virtual Machine"? With bootcamp partition I can gradually increase the size of the parti
-
Error while creating Absence as "APP-PAY-51271: The assignment is not eligible for the element
Hi, "APP-PAY-51271: The assignment is not eligible for the element."
-
In Lion, can I hide the address book without the application closing?
In Snow Leopard, when I clicked the red circle in the upper left-hand corner of the address book, the application automatically hid without closing entirely. In Lion, the same action closes the application so every time I need to use it, the address
-
Issue in Wait function in APEXP workflow
Hi Friends, I am working on APEXP R12 12.1.3 version Requirement: user expecting the email notification 48hr after summation of expense if he is not submitted the image. Customization I have done: I have used the standard Wait function after "wait fo
-
What is the best free word processing or office program for OS X Mountain Lion
What is the best free word processing or office program for OS X Mountain Lion?