Advice about buttons

hi, i am very new at using flash. Please could some one tell
me if there is an action script that you can assign a button so
that when you click it, it jumps to the beggining of the section of
the movie you want it to start playing, and then loops that
section.
If anyone needs me to elaborate or doesnt understand what im
going on about, just let me know and i'll try to explain better.
I would really appriciate this advice, thanks.

as 2 or as 3?

Similar Messages

  • Advice about using the laptop with closed lid while connected to external display

    Hello all HP forum members!
    I have an ENVY 17 with Win8.1 64bit, a great laptop, but I need an advice about using it while connected via HDMI cable to an external display (TV).
    When I play heavy 3D games, the computer produces more heat than usual (of course this is normal), but doing so with closed lid, could this harm the  display in some way, as a result of the heat?
    Thanks!

    Hi @VVel ,
    Thank you for visiting the HP Support Forums and Welcome. It is a great site for information and questions. I have looked into your issue about your HP ENVY 17 Notebook and issue with keeping the Notebook on while closing the lid. Here is a document on changing the Power option.
    Control Panel - Power Options - upper left - Choose what closing the lid does.
    Change Plan Settings and also check Advanced Settings. Make sure you do this for both battery and power.
    Hope this helps.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • My "About" button is not working HELP

    Hello fellow BB owners ive been tweaking and updating my new 8330 and it seems that now my about button does not respond.All the other menus and places work fine but when i click on the about button it just does not respond.
    thanks in advance
    Jason
    Solved!
    Go to Solution.

    Jason, have you recently upgraded your device to OS 4.5, and in that process did you remove the Voice Activated Dialing features? If you did, that also disables the Options > About screen, and was likely explained in the upgrade process you used.
    Workaround: on the homescreen, press and hold ALT while typing E A C E 
    or 
    Press ALT + rightSHIFT + H at the same time.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Need advice about a WiFi set-up

    Dear Gang,
    I want to have a pure 802.11n network using the 5 ghz spectrum and the wide array setting. However, I have one desktop computer that is 802.11g. I'd like to run a 25 ft. Cat 5 cable to one of the LAN ports on the TimeCapsule and then shut-off the WiFi on this computer. However, strangely enough, I've always had all my computers (even desktops) networked via WiFi so I don't know how well using the LAN works.
    What are the thoughts of the group?
    I know that ethernet should give me greater speeds to the TC's hard drive and should solve my problem with bringing a non-802.11n machine in to a "pure" network, but I don't want to do so if the set-up is arduous or if doing so makes me lose a lot of features that I get in an all WiFi network.
    TIA,
    Mark

    dwb,
    I'll definitely take your advice about the ethernet cables - thank you.
    Your info is reassuring as it means that my dual G5 will get a little more life out of it by connecting it in to my "pure" system via ethernet.
    Two other quick questions:
    -should I connect my new iMac via ethernet to the router, too, even though it's capable of going on my system in 802.11n 5ghz?
    -also, as an aside, I'm trying to figure out if my new 802.11n network will equal my current 802.11g network in terms of distance as I have an Apple TV that's a few rooms over. That Apple TV gets about 4 bars of signal from my current network. Do you think that 802.11n at 5 ghz will have an equivocal range?
    Mark

  • Need advice about zip rar files

    Here's wishing you all a very happy New Year!! Mr Greenhorn is back again! I have a question about zip and rar files. As some of you may remember, this is my first Mac, so I'm used to using the zip/rar programme on my old Windows O/S. Now I receive zip/rar files and can't open them. What is anyone's advice about downloading the zip/rar programme onto my Mac? Any particular pro's and con's? Any particular site to download from? Now my Mac has a compression programme included which converts files to zip files, but is that compatible to the actual zip/rar programme? And finally, where is the advantage to compressing files? Is it only for uploading or is there some benefit to having files 'compressed' on your actual laptop?

    Hi There
    Mac OS X has a built in Archive Utility which doesn't support .rar files. To uncompress rar files you will need a utility like RAR Expander or Stuffit Expander both are free. I suggest doing a search on MacUpdate (http://www.macupdate.com) or VersionTracker (http://www.versiontracker.com) to find a programme that you like.
    I personally don't see any advantage with keeping compressed files on your laptop (unless the archives being used often for emailing, uploading to websites etc). Compressing files does save disk space but if you get to the point where you need to compress your files to gain disk space then I suggest buying an external HD or a bigger internal HD.
    Hope this helps
    J.C

  • Need advice about best characterset for XMLDB

    Hi,
    Oracle 9.2.0.5 Windows 2000
    Please, give me an advice about best character set
    configuration for XML DB.
    During installation Oracle istallator suggests
    charset =AL32UTF8 for multilingual data and ncharset=
    AL16UTF16.
    Is it good settings for database, which will be
    used for usual multilingual data and XML DB ?
    Thanks,
    Viacheslav

    Yes, we strongly recommend the use of AL32UTF8 for XML DB.

  • Need advice about coalesce and deallocate unused space

    Hi experts;
    Here looking for an advice about coalesce and deallocate unused space.
    I got this tablespace with 87% full, one of the table in that tablespace has 1,150,325 records.  I'm going to delete 500,000 records from that table, but to release the space used by those records I understand that I need to execute other procedure. I was reading about coalesce tablespace and deallocate unused space.
    I found that apparently, both process can help me to free space. If you want to share with me your comments, about  advantages or disadvantages about them, in order I can take the best solution?
    Thanks for your comments.
    Al

    Hi
    after deleted rows, the high water mark is still the same and so the size of the table. you need to bring down the water mark
    here is what you need to do to bring down the high water mark. We do this monthly for performance purpose.
    This is an EBS R12 system  but the procedures are the same for EBS database or non EBS database.
    After you purge or delete data in a table
    1) alter table APPLSYS.WF_ITEM_ATTRIBUTE_VALUES move; <-- this operation will invalidate all indexes attache to the table
    2)select owner, index_name, status from dba_indexes  -- list all invalid object for user APPLSYS
    where table_owner = upper('APPLSYS')
    and
    status NOT IN ('VALID','N/A');
    3)spool idxrebuild.sql --generate script to rebuild indexes.
    select 'alter index ' ||owner||'.'||index_name ||' rebuild online;'  from dba_indexes
    where table_owner = upper('APPLSYS')
    and
    status <> 'VALID';
    4) run idxrebuild.sql   -- to rebuild indexes.  -- at this point if you check spaces on the table, it is still the same, you need to run #5
    5)exec fnd_stats.gather_schema_stats ('APPLSYS');  --fnd_stat is for EBS system you can replace with the database equivalent command.
    use this statement to count the block before and after the operation to see the different.
    select DISTINCT(SEGMENT_NAME), count(blocks) "Total Block" from dba_extents
    where
    owner IN ('APPLSYS')
    AND segment_name = 'WF_ITEM_ATTRIBUTE_VALUES'
    Hope this help.

  • Need advice about headphones and splitter for HP EliteBook

    Hello,
    I would like some advice about what headphones and headphones splitter I should use for an HP EliteBook. I am going on a plane trip with my kids, and I plan to get them both Leapfrog headphones. However, I need a headphone splitter so that they can both watch a movie on the same computer.
    Does anyone have any suggestions for a splitter for an HP EliteBook? I tried Amazon but couldnt find anything.
    Thanks
    This question was solved.
    View Solution.

    Hi,
    The following one is for more than 2:
        http://www.officeworks.com.au/shop/officeworks/belkin-rockstar-headphone-splitter-bef8z274
    and the following one is from Amazon:
        http://www.amazon.com/Belkin-Speaker-and-Headphone-Splitter/dp/B00009WQSR
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Need advice about transfering files

    Hello. I just got a new mac through an education deal at school. I hate this process of transferring files from one computer to the next but have never done it from one Mac to another before so thought it would be pretty smooth. Im new to the whole Migration Assistant and so need some advice about what to do next.
    I tried using migration assistance upon first turning on my new mac but was using wireless and it just wasnt working. My computer kept saying my new mac wasnt responding and I kept having to select ok or cancel every minute and with 15 hours to go, i thought f^*# it. So I decided to just start the computer up and manually transfer files. Then I found an ethernet cable, turned file sharing on and am using my public folder to transfer but its turning into The Most Tedious task and things arent transferring properly (like certain folders arent copying contents, just the folder itself).
    Now Im wishing I could have used migration assistant from the start but what can you do. I cant just re-install the mac os software and try again because before we got our new macs they installed some programs for us, like Logic, and I dont really wanna mess with that.
    Whats my best option at this stage? Ive transferred about a gig of pictures and documents over so far (and I think my old hard drive is about 60 gig full) but theres a bunch of other little things like iphoto, imovie, garageband, stickies, as well as big folders of music (and itunes - playlists etc) that I wanna make sure get copied in entirety. Will migration assistant handle that? Is it best to delete the stuff Ive transferred so far and let it start fresh? What would you do?
    Sorry my post is so long
    Message was edited by: girrrl

    Also, now that I have an ethernet cable, if I go ahead and use migration assistant to transfer the account from my old computer, will Logic only be available through the new account I have set up on my new computer? Would I have to log out of one account and into the other and back and forth to access the different files/programs? Any help would be much appreciated

  • Need advice about making a application log over every task succsessfully done to a target

    Hi!!!
    I need an advice about how to make an application log over every task succsessfully done to a target with an unique ID.
    I have developed an application with several tasks on the menu which have to be done in a certain order to program and test a target board,
    and the user want a log about which tasks are done to the target, so it is easy to know which step is next on the menu (It is a very routinebased  job).
    Do somebody have any good advice on how this can be done in a cleaver way ?
    Best regards,
    A

    Also, now that I have an ethernet cable, if I go ahead and use migration assistant to transfer the account from my old computer, will Logic only be available through the new account I have set up on my new computer? Would I have to log out of one account and into the other and back and forth to access the different files/programs? Any help would be much appreciated

  • Is it possible to change the name of the about button "About" to "MyPName"??

    Hi,
    Is it possible, in AfterEffects CS3, to change displaying name of the about button "About" to "MyPName"??
    If that is not possible could you please tell me how can I add the parameter, in my UI, similar to the "About" button?? I mean
    - color of the "MyPName" = color of the "About" button ( blue color right now )
    - click on "MyPName" then should open dialog ... etc.
    Thanks
    Manjunath

    It cannot be possible ( I think ).

  • Edit the About Button

    Hi again ... I am trying to include our company logo and
    links in the 'About' button on the Main Toolbar. Working in
    RoboHTML 6.0 with my primary output as FlashHelp. I've tried to
    edit an existing skin and Edit is disabled. I tried to create a new
    skin and have the option to create a customer WEBHELP skin or to
    create a skin from the gallery. I chose to create a skin from the
    gallery since when I tried to create a WEBHELP skin it doesn't work
    in my FlashHelp. Once I've chose a skin from the gallery I'm asked
    to provide a new name, which I've done. This simply drops the new
    skin in the Project list and does not allow me to edit this new
    skin. The new skin does appear in the output properties but I'm not
    able to edit the About button in this view.
    Any ideas on how to edit the About button on the Main
    toolbar.
    Thank you.
    Kathleen

    You're most welcome!
    Let me fix something I said earlier
    : You can change the "Powered By" part of the button
    by opening wfres.xml in your output files (use a text editor like
    Notepad). You would see a line that looks like this:
    <item name="Logo/Author" value="Powered By"/>
    Change "Powered By" to something else and save the file, and
    that text will show up in your button. However, be aware that when
    you generate FlashHelp again, your changes to this XML file get
    overwritten. If you want the button text to remain changed, you can
    keep the changed version of wfres.xml in another location. Then you
    copy and paste it into your output directory after you generate
    FlashHelp. (Otherwise, you have to go into wfres.xml every time you
    generate FlashHelp and change this text again.)
    Also note that what I said earlier about having to change the
    .fla file for this button is still true for the "RoboHelp" or
    "FlashHelp" part of the button. That part has to be changed in
    Adobe Flash.
    A little background on your question about changing skin
    files: A FlashHelp skin is made up of multiple SWF movies. A .swf
    is created using a .fla file, which is editable in Adobe Flash. The
    .fla files used to create the FlashHelp skin movies are included
    with the .swfs. When you create or import a Flash skin, RoboHelp
    puts all the .fla and .swf files in this directory: <project
    folder>/!SkinSubFolder!/<skin name>. If you change one of
    the Flash files in this directory and export it as a SWF into that
    same directory, RoboHelp will use that new version of the file when
    you next run the FlashHelp output.
    This means (to answer your question) that if you change a
    .fla and .swf file in a particular project's !SkinSubFolder!, the
    skin is changed for that project only. To use that same changed
    file for another project, the safest way is probably to import the
    entire skin into the other project.
    Hope this is some help,
    Ben

  • Advice about buying new Macbook

    Hi all,
    I'm trying to decide between the Macbook Air and the Macbook Pro with Retina display, and I'd like to see if people have advice about which one would better serve my needs.
    This is my only computer, and while it needs to be portable, it doesn't need to necessarily be the lightest possible (Macbook Air).
    What I do want is at least 256GB of storage. Right now I have 156GB, and I'm almost maxing it out. I've had to take things off my hard drive to make more room. I have a large iTunes library and a large iPhoto library, and I want all those things on my hard drive.
    I also want good performance because that's where my 2008 Macbook is not doing so well - gets very slow, esp when iPhoto and similar apps are open.
    I need to be able to work with several apps open - Word, Excel, Adobe Reader, Chrome, etc. I don't need to do a lot of gaming or sophisticated video editing or anything like that - I work mostly with MS Office programs.
    So is the Macbook Air good enough or should I get the Macbook Pro?
    Thanks!

    The Air should be ample for your described needs.  If weight is not a consideration, the Air has by far the best battery run time, so if a lot of work is done without an AC outlet available, that is some thing to take into account.
    The Pro has a superior display and is a more powerful machine, but the extra power is not needed for what you have described.
    Personally I would urge you to consider installing as much storage as you can afford.  Using external HDDs in the field gets very old quickly.  Over time data has a habit of increasing.
    One important point to keep in mind, with both the Air and the Pro, no future upgrades are available at this time so configure the unit accordingly.  I would spend my money for upgrades in this order, storage, RAM, CPU.
    Ciao.

  • I need some advice about the macbook pro and iPhone 5. I took a video on my iPhone and tried to email it it said it was too big to send? So i downloaded it to my macbook pro and tried to mail it to no avail? The macbook tells me the server won't let it th

    I need some advice about the macbook pro and iPhone 5.
    I took a video on my iPhone and tried to email it it said it was too big to send? So i downloaded it to my macbook pro and tried to mail it to no avail? The macbook tells me the server won't let it through other mail goes through any ideas how to resize it or what it might take to send it?

    I agree with LowLister, the best option for you to share the video online is to upload it to your online storage account for example : Box, Dropbox, SkyDrive (All of them provide free storage beginning from 2GB).
    You can upload the files which you want to share in this online storage and then they have sharing options in which you'll will get the link of the file to be sent and send the email. You're good to go!
    Tip : You can store multiple files for backup purposes.

  • Updating Webhelp About button

    How can I update the information in the About button in the toolbar for help generated using Webhelp?  I have the copyright information for my project in there and it has gotten out of date, but I can't find where to update it.  The About file in my baggage files list is .htm and it won't open for me.

    This was interesting because it made me check the copyright date of the skin used with my WebHelp Pro project.
    When I clicked Edit, RoboHelp displayed the "Critical error of Source Control Provider. Please restart IDE." error. I clicked OK.
    Then, when I tried to edit the skin, it displayed the "Cannot Complete Operation" error because the file could not be checked out from version control. (This sequence of errors occurs every time I generate the Help, too. After generating the Help, I have to shut RH down and open it again in order to keep working on the project..)
    In this case I had to edit the copyright date by opening the skin in an external editor.
    When I regenerated the Help, I didn't even see the About box.
    When I opened the Skin Editor again, I saw that it's a WebHelp Skin Editor. I assume that, for some reasons known only to RoboHelp, the About Box does not appear in WebHelp Pro output.
    Carol

Maybe you are looking for