Advice needed on upcoming fios instalation

My network is set up using airport extreme 802.11g and airport express.Everything works fine. Is there anything I should know about when they install? I heard somewhere that I may not be able to use my extreme? or express? any advice would be greatly appreciated.

If you are using "AirPort Admin Utility", DISABLE the option to "share a single IP address".
If you are using "AirPort Utility", configure the AEBS to operate in bridge mode.
Consult the Verizon router's documentation on how to access the configuration page using a web browser. Then visit the wireless settings and disable the wireless network.

Similar Messages

  • Advice needed on where to install Bpel 10.1.3 (we use OracleAS 10.1.2)

    If I understand correctly, Bpel 10.1.3 cannot be installed on the middle tier of OracleAS 10.1.2. Unfortunately, we are not in a position to upgrade OracleAS at this point in time, but we want to use Bpel 10.1.3. I understand that Bpel portlets can be "deployed" from Bpel 10.1.3 and used in OracleAS 10.1.2, so this is good.
    Would it be feasible to use the Bpel Process Manager 10.1.3 Developers version with Oracle Lite (Windows) in a production environment? If so, I can use Jdeveloper to create the bpel, deploy the process to the windows box with bpel process manager 10.1.3 with Oracle Lite, deploy the Bpel portlets and use them in OracleAS 10.1.2 ...
    Given the goal of developing BPEL 10.1.3 processes and using the bpel portlets in OracleAS 10.1.2, and suggestions on where to install Bpel 10.1.3 and what version to install?
    Thanks in advance -
    Kent

    Hi,
    if you install both on the same server, you should plan:
    which ports you want to assign to which iAS
    is there enough RAM?
    "they should not conflict with each other?"
    no. but test it, like everything you want to use in production.
    Yes, you can install it on a middle tier (just read the installation guides....)

  • Need Urgent Help Cannot install Mac OSX 10.6 on 20" intel imac

    I recently purchased an intel imac an intel mac pro from an auction. When i purchased the macs i was told that no operating systems will installed and i would need to purchase and install mac osx10.
    I purchased the mac osx10.4.6 family pack from the apple store online.
    i put the new disc in the mac and restarted holding down c.
    for some reason nothing happens and i get folder with a question mark.
    I have tried this several times but nothing seems to work.
    I am a complete novice with macs and migrsting from pc.
    thanks

    You cannot buy a retail version of Tiger that will install on any Intel Macs. You must have the original installer discs that came with the computer. You should not have purchased the computers without them nor should they have been sold to you without them.
    The only option you have is to call AppleCare or go to a local Apple store and see if you can purchase the discs needed for each computer (there are different versions for each model.)
    Why reward points?(Quoted from Discussions Terms of Use.)
    The reward system helps to increase community participation. When a community member gives you (or another member) a reward for providing helpful advice or a solution to their question, your accumulated points will increase your status level within the community.
    Members may reward you with 5 points if they deem that your reply is helpful and 10 points if you post a solution to their issue. Likewise, when you mark a reply as Helpful or Solved in your own created topic, you will be awarding the respondent with the same point values.

  • During the installation of Mozilla Firefox 4.0 on Windows Vista, I received an error message saying that I need administrative privileges to install. Are administrative privileges necessary to install Mozilla Firefox 4.0 on Windows Vista?

    The happens when I attemp to install Mozilla Firefox 4.0 on a classified network. Initially when I try to install Firefox 4.0, a screen comes up saying that I need administrative privileges to install. Then when I cancel my logon username/password administrative screen, the installation process lets me continue and I can install the Firefox 4.0 software. I would like to know if Firefox 4.0 might encounter problems later on a classified network if Im able to install the software initially.

    hello, when this is happening after you've already updated firefox with your admin account, try to delete the ''updates'' folder and ''active-update.xml & updates.xml'' within the %localappdata% folder of your restricted account like it is described in http://kb.mozillazine.org/Software_Update#Software_Update_not_working_properly

  • Need copper drop line installed at a new home I bought.

    I bought a new house a little while back and inquired in email if my DSL would work through FIOS. I was informed it wouldn't but to call their service center and I would most likely be offered a deal, etc. I call and get an unfriendly\unhelpful rep. The price she offers me is still more than double of what I currently pay.  I send the below email:
    ==========================================
    Hello,
     Let me start by saying that I have been a Verizon customer with the same phone number since I was about 18 years old....I am now 44. I've only had to call Verizon a couple of times during that time frame and when I did, found them to be friendly and helpful.
      Recently however I bought a new house and wanted my DSL transferred over to my new property. I'm being told that I cannot do this as the previous owners had FIOS installed there. It seems while checking into things online that the copper drop wire can indeed be replaced back if you want to go back and forth arguing with Verizon for three months or more. I even saw an article online from a Verizon rep stating that he doesn't see why someone would want to go back to copper but if someone bought a new home and wanted the copper line put back in, that they would do so at no charge. So I am not sure why I was told this cannot be done previously.
     Anyhow, I called a Verizon rep last Wednesday morning around 10:30am. I wish I would have written her name down and I could be mistaken but I think she might have said her name was Samantha? Either way, I thought she would be more than willing to work with me but I did not find her very friendly or helpful at all.  Verizon is asking me to get FIOS....which I DO NOT want. If you are going to refuse to re-run the copper line at my new property then I ask that you at least grant me FIOS service for the contract I have for my DSL. The women I spoke with said the bottom of the rung FIOS speed would cost me (edited)! That's outrageous! That's more than double of what I am paying now for something that I don't even want. I am a single man and am the only one using my internet connection. I just basically check email, Facebook, pay some bills online and watch a few YouTube videos. That's all. I find the speed of my DSL to be perfectly acceptable. I see no reason why Version cannot give me their slowest speed FIOS for the price of what I currently pay. I've been a dedicated customer for over 25 years and have been happy with my service until now. I feel like my business throughout the years has been unappreciated and for the person on the phone I spoke with, they didn't seem to care at all.
     So in closing....I'm willing to forgo arguing about have the copper drop wire put in if Verizon would be kind enough to honor my current DSL contract with them and put me on their slowest FIOS speed for the same price. It seems fair to me and like a good compromise to keep a long term customer happy. Thank you for your time and concern in this matter. 
    =============================================
    I get a relpy back from a woman called Michelle. She tells me she spoke to her supervisor and gives me some price plans. The amount deal she gives me is more than what I was told previously and is more than an actual mailing (which I still have) that included both phone with internet! I'm then told I should call a service number and ask to speak to a supervisor. I tell her that I already called this number and got no where. She then says she will have a supervisor call me. I inform her that I work third shift, keep an odd sleep pattern which often means sleeping during the day and that I would prefer to handle this through email as it all seems simple enough to me. She tells me that she forwarded my email to a supervisor and they will contact me through email soon. I patiently wait two or three days and no reply. I email again and Michelle responds back with the standard textbook replies and tells me a supervisor will call me in 24-48 hours. I have to go through the whole process again on how I prefer to handle this in email this way we can both get back to one another at both our convience. For me personally, I don't have 24-48 hours waiting for someone to call me, nor do I want to be on the hold for a half hour and then arguing for another half hour or more.  So here I am, for the second time....days after I was told that a supervisor would email me in regards to my problem but yet I have still heard nothing.
      It's not like I chose FIOS myself and now want to go back or anything. I merely bought a new house in which the previous owners wanted FIOS there....not ME. I see no reason why they cannot install the copper drop wire back or at the very least....give me FIOS for the price of my current DSL plan or at least something VERY comparible. I am totally put off that they would treat such a long, good standing customer so non-chalantly. While I would rather stay with Verizon, there are other options out there and I will pursue them if they continue to turn a blind eye to my problem.  You would think that they would want to keep me as a voice\DSL customer (even if it is for a lower contract price) rather then lose me as a customer all together. Should I decide to cancel my Verizon I most certainly will file complaints through the appropriate channels, contact my local TV "On Your Side"  team and possibly go as far as to consider small claims court for not honoring my current contract at my new residence\refusing to install the copper drop wire back. If Verizon truly does care about it's customers then I would love nothing more then to find someone willing to promptly help me in my situation. Thank you.

    Be sure to reset your modem whenever you change what connects to it. Power it down.
    Three days ago I went in to a bestbuy and bought a new 2013 Airport Express.
    Is my Extreme a bad unit?
    Did you purchase an 802.11n Express or an 802.11ac Extreme?
    Either way, update its firmware:
    AirPort Base Station Firmware Update 7.6.4
    or
    AirPort Base Station and AirPort Time Capsule Firmware Update 7.7.1
    respectively.
    If it's still slow, return it. It's not normal.
    Buy directly from Apple. The price is exactly the same and shipping is free.

  • I just purchased an airport extreme router to increase the range of    my wifi. I have an imac with 10.5.8. I get a flashing yellow light on the base unit and it tells me I need airport utility to install yhe ubnit. Where do I get this and how do I do it?

    I just purchased an airport extreme router to increase the range of my wifi. I have an imac with 10.5.8. I get a flashing yellow light on the base unit and it tells me I need airport utility to install yhe ubnit. Where do I get this and how do I do it?

    sylviafromhanover wrote:
    So I assume that the original modem stays installed with the coaxial cable and the Exrtreme is in addition to that. 
    Yes, that is correct.
    Did you have the instructions that came with your Airport Extreme?  Are you sure you have it setup properly?  Here is the setup guide:
    http://manuals.info.apple.com/en/airportextreme_802.11n_userguide.pdf 
    Ensure you have everything setup properly.  Once you do this and if you are still having trouble, follow Star's instructions. 

  • Why can't I update to OSX 10.9.1? I restart my computer and the AppStore still says I need to restart to install.  I've tried many times with failure.

    I restart my computer and the AppStore still says I need to restart to install.  I've tried many times with failure.  I have restarted manually, through the appstore, and on the Apple Menu.

    If your computer is looking for a server, it sounds like you might have a problem with your Internet connection.
    Chrome is probably trying to warn because .exe files can contain viruses. Chances are, if you're connected to mozilla.com and have https: (a secure connection), you don't have to worry about getting software with viruses or other malware.
    Is your account on your computer an administrator account? Are you able to install other programs without limitation? If not, you might not have administrative privileges, which will make it hard to install things. You can download things, that doesn't require admin privileges, but altering the computer's operation by changing programs requires such privileges. If you do have admin privileges, I don't know what could be causing your problem.
    Don't know if I've helped you or not, hopefully someone else knows specifically to what you refer and can answer, if my suggestions didn't do anything to help

  • Adobe Bridge has been deleted and needs to be re-installed. How can this be done without reinstallin

    Adobe Bridge has been deleted and needs to be re-installed. How can this be done without reinstalling the entire CS5

    Hi RDMDanielM,
    Welcome to the Community!
    We cannot install Adobe Bridge as a Standalone product, you can just reinstall Photoshop and Bridge will be reinstalled with it. Go ahead and start uninstalling CS5 suite but choose Photoshop from the list and the same will be applicable while Installation.
    Thanks!
    Ankit

  • I need help, yesterday I installed and reinstalled the Yosemite system and take long to turn on my laptop, the bar takes to fill, and I'm worried. Can you help? thank

    I need help, yesterday I installed and reinstalled the Yosemite system and take long to turn on my laptop, the bar takes to fill, and I'm worried.
    Can you help? thank

    revert back to Maverick that is what I had to finally do. This was the worst upgrade I have ever seen. Hopefully you have Time Machine backup and can revert back. It was pretty painless except for a few issues. I will wait until Apple gets their stuff together on this upgrade or may never will.

  • I am running 10.7.5 but when I try to install 10.8.2 I get an alert that says 10.8 is required first.  Can't find a 10.8 system upgrade.  What do I need to do to install Mountain Lion?

    I am running 10.7.5 but when I try to install 10.8.2 I get an alert that says 10.8 is required first.  Can't find a 10.8 system upgrade.  What do I need to do to install Mountain Lion?

    Buy it from the Mac App Store.
    (70259)

  • I need appleisightinstaller.exe to install the isight driver for Windows Vista running in Parallel Desktop 6 for Mac, but I don't have a Leopard DVD. What came with my Macbook Air was a flash stick "MacBook Air Software Reinstall Drive" only.

    I need appleisightinstaller.exe to install the isight driver for Windows Vista running in Parallel Desktop 6 for Mac, but I don't have a Leopard DVD. What came with my Macbook Air was a flash stick "MacBook Air Software Reinstall Drive" only.

    All,
    A very interesting NOTE to this thread. In order to try and get the "ignore permissions" box to show up in GET INFO (so I could execute Matt the Magician's solution to file sharing issues)-- I ran the terminal command for disabling ACLs on my internal HD / start up disk (as indicated in the linked thread to BDAqua's forum).
    Although I understand that this was useless for disabling permissions on the start up disk (as everyone here pointed out) and allowing me to see the "ignore permissions" check box - somehow it did seem to fix my file sharing problem...and that was the root problem I wanted solved in the first place! After doing the terminal command and a quick reboot, I went in and tested file sharing on the chosen directory and I can create new files or work from existing files in the directory, with both users being able to modify / and save from both machines and each machine sees the revisions and can build from them. Bottom line - I'm stoked and want to thank everyone for their help.
    The only other tweak I made was going over to my wife's machine and instead of using her log in / password, I just used my name and password to connect to my main machine that was sharing directories. Maybe that's what fixed the problem or the ACL disable but either way...I'm up and running the way I want to be.
    Hope this thread helps anyone else who has these file sharing / permissions issues with Leopard. Especially for anyone wanting to do such a simple file sharing set up between 2 computers. I wish I understood exactly which tweak fixed the problem, but at least it works the way I want now.
    So happy to be done w/this one!
    Thx everyone. Any additional input on what solved it is welcome, so my curiosity is quelled...
    TC

  • I need to know which install disk to buy for my mac serial number 17*****ZE4

    Need to know which install disk to buy since I lost my original.
    <Edited by Host>

    You have an 24" Early 2008 iMac. It came with Mac OS X 10.5, and you would need the disk set for your specific model. It's possible that if you call Apple Support, they can still sell you a set, but that model of iMac is no longer supported by Apple so Support may not be able to help. If not, then you'll need to look to private sellers or companies that sell obsolete software.
    You can also call the online Apple Store and purchase a retail copy of Mac OS X 10.6 Snow Leopard.
    Regards.

  • I need a patch files Install Oracle 9i(9.2.0.1) in RHEL3

    Hi!!!
    I need a patches to Install Oracle 9i(9.2.0.1) in RHEL3.
    I know that they are in metalink, but I don't login to metalink site... *^^*
    I need some patche files...
    p3006854_9204_LINUX.zip
    p3095277_9204_LINUX.zip
    p3119415_9204_LINUX.zip
    p2617419_210_GENERIC.zip
    Could somebody send them to email, my email address is [email protected]
    Thanks, Have a good day... *^^*!

    Hello !
    I need a patches to Install Oracle 9i(9.2.0.1) in RHEL3.
    I know that they are in metalink, but I don't login to metalink site... *^^*
    I need some patche files...
    p3006854_9204_LINUX.zip (2 KB)
    p3119415_9204_LINUX.zip (7 KB)
    p3238244_9204_LINUX.zip (280 KB)
    p2617419_220_GENERIC.zip (220 KB)
    P3095277_9204_LINUX.zip (318 MB)
    Could somebody send them to email, my email address is [email protected]
    Thanks, Have a good day...

  • I need help in re-installing my Adobe Acobat XI Pro

    I need help in re-installing my Adobe Acobat XI Pro

    What is the current situation that says you need to reinstall? What OS?

  • OBIEE 11g on Linux - do I need a DB Client Installed???

    I have installed an 11gR2 database on an OEL Virtual Machine, and on a separate VM installed OBIEE 11.1.1.5.
    The RCU created the metadata required for BI - and out of the box, OBIEE works absolutely fine.
    Now I'm trying to migrate a database and RPD etc from another (Windows) environment... and I'm getting errors:
    "Oracle Error code: 12154, message: ORA-12154: TNS:could not resolve the connect identifier specified at OCI call OCIServerAttach. [nQSError: 17014] Could not connect to Oracle database. (HY000)."
    This suggests that I need an Oracle Client installed on my OBIEE server, to enable it to connect to my DB server.
    This seems odd - as RCU has created the metadata fine, and OBIEE is obviously using it? Do I really need a client now? Please could someone explain?
    Thank you!

    Oracle client should be installed in the OBIEE machine, then add Oracle server information to tnsnames.ora file . Later copy the tnsnames.ora into OBIEE installed directory, for more information see the following link.
    http://123obi.com/2011/03/error-the-connection-has-failed-in-obiee-11g/
    Hope it helps you.
    Regards,
    Kalyan Chukkkapalli
    http://123obi.com

Maybe you are looking for