Advice required for dealing with a DC that has exceeded the tombstone lifetime (ID 2042)

I have a server (2003 R2 Standard) that appears to have had replication issues and is beyond the tombstone lifetime. The Primary DC holds all FSMO roles (Server 2008 R2 Standard) and this is the only other DC on the domain and this is on a single site.
We are experiencing various problems on the domain over the last few days. (Users receive "The trust relationship between this workstation and primary domain failed." general logon problems on other pc's and member servers, Event ID 4)
The 2003 DC is due to be demoted but I want to clean up the situation and need some assistance in going down the correct route.
I think I should plan to
repadmin /removelingeringobjects
demote the server once the replication is functioning again.
Is a valid option to just force demote the 2003 DC then clean up the metadata? I ask as I plan to demote that server anyway but Microsoft documentation seems to suggest this is a last resort.
I tried to run the repadmin with the /advisory_mode switch but this failed with "Can't retrieve message string" errors but this may be down to my incorrect command use.
Thanks in advance for any assistance.
Techie247

And that is a very real fly in the "metadata cleanup" ointment. This means we're looking at a strategy of:
1.) Fix any lingering objects.
Either continue to hammer at that repadmin syntax or try using the repldiag tool. Here are some helpful links.
http://blogs.technet.com/b/robertbo/archive/2010/11/07/cleaning-lingering-objects-across-the-forest-with-repldiag-exe-part-2-of-4.aspx
http://blogs.technet.com/b/glennl/archive/2007/07/26/clean-that-active-directory-forest-of-lingering-objects.aspx
2.) Re-enable replication by setting the infamous registry value.
http://technet.microsoft.com/en-us/library/cc757610(v=ws.10).aspx
Here's a KB that covers the full process as well -
http://support.microsoft.com/kb/2020053
Obviously the key for you will to get past that lingering objects piece. Hopefully you can get that going with either repadmin or repldiag. Good luck!

Similar Messages

The Active Directory cannot replicate with this server because the time since the last replication with this server has exceeded the tombstone lifetime.

the solution what i got from this from is to Depromote and promote it again to DC, my question when i depromote, will the OU , object will remain as it is or it will be lost. And what precautions do i need to take?
Adding to the above points, my Domain has only 2 DC, should both the DC be demoted and promoted

Under NO curcumstances you demote both of your DCs. You must always have one or 2DCs running, otherwise you will loose your entire AD. Only 1 DC should be demoted. you should wait couple of hours prior to promoting it back to DC role again.
Ideally your primary DC will continue maintaining the OUs, GPOs, and user accounts.
I would suggest brining in a new, 3rd DC intro play, leave it for a day or 2 to replicate everything properly, confirm that its propagating properly with the primary DC, and only then demote and remove the offending DC.
There are actually ways for recovering from tombstone lifetime much painlessly than DC demotion/promotion. Depending on what is your AD running on, Windows 2003 or 2012 R2 servers:
here a few links that might help you understand how it works:
Primary link :http://blogs.technet.com/b/askpfeplat/archive/2012/11/23/fixing-when-your-domain-traveled-back-in-time-the-great-system-time-rollback-to-the-year-2000.aspx
http://community.spiceworks.com/topic/343609-ad-replication-can-t-because-exceeded-tombstone-life
https://support.microsoft.com/en-us/kb/2020053?wa=wsignin1.0
http://shebangme.blogspot.com/2011/01/active-directory-time-since-last.html

Flooded with error: Table RequestUsage_PartitionX has 442892288 bytes that has exceeded the max bytes 442857142

Hi all,
Since last week my 2013 farm (3 WFE, 3 App server, SQL 2012) application event log flooded with error every 5 minutes.
Table RequestUsage_PartitionX has 442892288 bytes that has exceeded the max bytes 442857142.
I have google the error and only found Steve Mann's blog discussing about this. Yet there is no additional information in terms of how to fix it. Just wondering if anybody has seen this and know how to fix it?
Appreciate any suggestion and thanks in advance.
Sally

Hi Sally,
Thank you for your posting!
For your error, it is coming from the Usage Infrastructure. The root cause is that your SharePoint Server usage data is exceeding the daily partition size for the logging DataBase.
For more detailed information, you can refer to the blog:
Blind spots in Usage file and Web Analytics Reports
Thank you for your understanding and support.
Best Regards,
Eric
Eric Tao
TechNet Community Support

Table RequestUsage_Partition14 has 445538304 bytes that has exceeded the max bytes 442857142

Dear All,
Since last 4 weeks my SharePoint 2013 Farm facing Error in Event Ever such as "Table RequestUsage_Partition14 has 445538304 bytes that has exceeded the max bytes 442857142"
Kindly do let me know how we can resolve this issue.
Thanks in Advance.
Pravin Dhulap

Hi All,
I have updated the below script on our test Environment and i am not bale to see this error in Error log.
add-Pssnapin Microsoft.SharePoint.PowerShell
$UsageDefinition = Get-SPUsageDefinition -Identity "Page Requests"
$UsageDefinition.MaxTotalSizeInBytes = 21884901888
$UsageDefinition.Update()
and i have used smae script on PROD server but the i am still receiving same error.
Kindly let me know if there are any settings needs to be done or not??
Kindly provide the solution if anyone of you has it.
Thanks.
Pravin Dhulap

How to get files with no checked in version from library that has exceeded the threshold limit

I have exceeded the threshold limit for library, when I click on "Manage files which have no checked in version"
I get error that threshold limit has been exceeded for library, so I am not able to use this option.
Please let me know if there is any workaround or script that can be used to get this done.
or if we can modify the view with some query

Hi niles, Here is a page that details how to retrieve all the files and take ownership of them via powershell to check them in:
http://www.demantprasad.com/2013/05/manage-files-which-have-no-checked-in.html
Mathieu Desmarais http://www.matdesmarais.com/

I am a small service company and we use the iphone 4 do you have a program we can use for scheduling one one computer that has all the schedules of our service techs so we can change appointments and track

I run a small service company and we use the iphone 4, do you have a program we can use for scheduling from one or two computers that allows us to schedule service calls and track our service techs.
A program we can enter each phone and have there schedule and current location available at all times.

Search the iTunes App store or find a developer to create an app that meets your needs.

I keep having the message the software required for communicating with your ipad is not installed correctly please reinstall, I've uninstalled and reinstalled the latest version of itunes 8 times and no luck does anyone have any advice?

I keep having the message the software required for communicating with your ipad is not installed correctly please reinstall, I've uninstalled and reinstalled the latest version of itunes 8 times and no luck does anyone have any advice?

First, for the forum view issue. Go to My Settings (on the right) and in General Settings change the Topic Page View to Flat. Click Save. Posts should show up in the order they were written.
Have you seen this?
http://docs.info.apple.com/article.html?artnum=93764
Also, since you said that you've gone through the 5 Rs, I would assume that you used the iPod Updater to restore (since there is no other way of doing it and you don't "run" the 5 Rs).
When you restored, did you use the latest updater?
You may also want to try formatting the iPod through Windows. Connect it to the computer and when it appears in My Computer right click it and go to format. Does anything happen? Can you format the iPod through Windows?
btabz

When I click on itunes, it tells me that thesoftware required for communicating with ipods and mobil phones was not installed properly. I have not changed anything on my computer so I'm not sure what I should do? Help

Help, When I click on itunes on my computer it tells me that the software required for communicating with ipods and mobil phone was not installed properly. I havent' changed anything. Does anyone know what I should do? Thanks

See the second box of Troubleshooting issues with iTunes for Windows updates.
tt2

What is best practice for dealing with Engineering Spare Parts?

Hello All,
I am after some advice regarding the process for handling engineering spare parts in PM. (We run ECC 5)
Our current process is as follows:
All materials are set up as HIBE's
Each material is batch managed
The Batch field is used for the Bin location
We are now looking to role out PM to a site that has in excess of 50,000 spare parts and want to make sure we use best practice for handling the spare parts. We are now considering using a basic WM setup to handle the movement of parts.
Please can you provide me with some feedback on what you feel the best practice is for dealing with these parts?
We are looking to set up a solution that will us to generate pick lists etc and implment a scanning solution to move parts in and out of stores.
Regards
Chris

Hi,
I hope all the 50000 spare parts are maintained as stock items.
1. Based on the usage of those spare parts, try to define safety stock & define MRP as "Reorder Point Planning". By this, you can avoid petty cash purchase.
2. By keeping the spare parts (atleast critical components) in stock, Planned Maintenance as well as unplanned maintenance will not get delayed.
3. By doing GI based on reservation, qty can be tracked against the order & equipment.
As this question is MM & WM related, they can give better clarity on this.
Regards,
Maheswaran.

Best practice for dealing with Recordsets

Hi all,
I'm wondering what is best practice for dealing with data retrieved via JDBC as Recordsets without involving third part products such as Hibernate etc. I've been told to NOT use RecordSets throughout in my applications since they are taking up resources and are expensive. I'm wondering which collection type is best to convert RecordSets into. The apps I'm building are webbased using JSPs as presentation layer, beans and servlets.
Many thanks
Erik

There is no requirement that DAO's have a direct mapping to Database Tables. One of the advantages of the DAO pattern is that the business layer isn't directly aware of the persistence layer. If the joined data is used in the business code as if it were an unnormalized table, then you might want to provide a DAO for the joined data. If the joined data provides a subsiduray object within some particular object, you might add the access method to the DAO for the outer object.
eg:
In a user permissioning system where:
1 user has many userRoles
1 role has many userRoles
1 role has many rolePermissions
1 permission has many rolePermissions
ie. there is a many to many relationship between users and roles, and between roles and permissions.
The administrator needs to be able to add and delete permissions for roles and roles for users, so the crud for the rolePermissions table is probably most useful in the RoleDAO, and the crud for the userRoles table in the UserDAO. DOA's also can call each other.
During operation the system needs to be able to get all permissions for a user at login, so the UserDAO should provide a readPermissions method that does a rather complex join across the user, userRole, rolePermission and permission tables..
Note that f the system I just described were done with LDAP, a Hierarchical database or an Object database, the userRoles and rolePermissions tables wouldn't even exist, these are RDBMS artifacts since relational databases don't understand many to many relationships. This is good reason to avoid providing DAO's that give access to those tables.

"The software required for communicating with the iPod is not installed..."

I realize my explanation of my problem is long-winded, so if you want a shortened version, here it is:
I've followed all the instructions trying nearly everything, and no matter what I do, iTunes gives me the error saying: "The software required for communicating with the iPod is not installed correctly. Please reinstall iTunes to install the iPod's software." My G5 iPod (60GB) works on two other computers (both without any music on them), so I assume there something wrong with my computer and not the iPod itself.
Now for the long-winded story of the last eight hours of my life...
I just got the Generation-5 iPod Video (60GB) a today and I'm having problems already. I followed the instructions and installed the iPod software and then plugged in my iPod (iTunes has been on my computer for a while now). I was expecting iTunes to open after plugging in the iPod, but my device manager only detected and installed "a new device". I manually opened iTunes and got an error saying: "The software required for communicating with the iPod is not installed correctly. Please reinstall iTunes to install the iPod's software."
After re-installing the iPod software and iTunes, and restarting my computer countless times, I came looking for help here. I found this page, which seemed to outline my problem exactly. My computer recognizes the iPod as a drive, but iTunes won't have anything to do with it. I have all the symptoms outlined in the heading, so I hoped to solve my problem there. I followed the instructions step-by-step, and after the final restart, I open iTunes to get the same exact error message.
I decided to determine whether there was a problem with my iPod or if it was my computer. I plugged my iPod into my uncles's powerbook, and got to the point where I can name and configure my iPod. I expected it to work flawlessly on a Mac (which it did) but there is no way for me to continue using a Mac (after tomorrow) for my iPod. This formatted the iPod for a Mac, so I went to another (different from the original) Windows computer, clean of any iTunes and iPod software, and followed the instructions exactly as they're supposed to be followed. After the installations, I plugged in my iPod, and although iTunes didn't open, I was able to format back to Windows and name my iPod (a step in the right direction). I should note that my (anti-iPod) computer is a Windows XP Pro, and the working one is Windows XP Home Edition. This was all well and good, until I remembered there was no music on this computer. So my iPod is completely working there, but there isn't anything I can do with it.
Next, I came back here and browsed around the discussion boards, hoping to find somebody with a similar problem to mine. There seems to be alot of errors concerning iTunes not recognizing the iPod, but none of the solutions I tried worked for me, including changing the drive letter. I get the "iPod Service Error" while trying to restore to factory settings through iPod updater.
Of course, I could transfer all 32GB of music from one computer to another, but the second (working) computer isn't mine and I won't have access to it in a couple months. It would be most convenient if I could get my iPod working on my own computer. Any help would be appreciated, especially from somebody who has solved this problem or know how to solve this problem.
P.S.
Here are some other minor details that my be important, but I didn't feel they were worth including.
- My brother has his iPod mini set up on my computer, under a different user login. He gets the same error once in a while, but re-installing iTunes always solves the problem for him. I had him try solving my problem his way, but nothing worked for him either.
- My computer is an AMD Athlon 64 Processor 3200+, 512MB RAM with Windows XP Pro SP2 installed. My internal hard drive is partitioned, using the letters C, D and H (C being my system files, D used for recovery files and H for my applications and games). My E drive is used as a DVD/CD-ROM Drive, and drives F and G are reserved for virtual drives (none have been running during this entire ordeal). My external hard drive uses the letter I, and I manually set my iPod to use the letter J (I've never used 'J' for anything else before).
- Yes, I have downloaded and installed the latest versions of iTunes and the iPod software.
- I'm assuming there is a problem with my computer and not my iPod, since it worked on both other computers I tried. I'm hoping it's as simple as changing a registry file or cleaning out (yet another) temp directory.

Solution to "Software required for communicating with the iPod is not installed"!
I battled this same problem for about 5 hours. Going through re-installations, the "5 R's", all these discussion boards. Nothing worked.
The problem is that iPodService was repeatedly crashing after minute or so. You can verify this by hitting Ctrl-Alt-Delete and noting that iPodService is missing from the process list (sort by image name), or by right-clicking on My Computer and selecting "Manage", then going to Services and checking out the IPodService service - if it gives you the option to "Start", then it's not running.
Here is what worked.
1. De-install iTunes and iPod (if you have the updater installed) completely by going to Start --> Control Panel --> Add/Remove Programs. Also delete the C:\Program Files\iTunes and c:\Progam Files\iPod\bin directories. (Don't worry, this doesn't affect your saved music files.)
2. Log in as an Administrator
3. Go into the registry (note this is dangerous - you should be careful) and remove the iPod entries that the uninstaller misses.
3.1 Go to Start menu --> Run.
3.2 Type in "regedit".
3.3 Go to HKEYCLASSESROOT --> IPodService.iPodManager.
There are two keys here, iPodManager and iPodManager.1. In my case, I did not have permission to view either of these. I think this is the root cause of the problem. I think the installer can't properly update these because it doesn't have permission. So you need to change the permissions:
3.4 Right-click on IPodService.IPodManager
3.4.1 Select "Permissions..." A warning will appear saying you don't have permission, but that you can change permissions.
3.4.2 On the window that launches, click on "Advanced..."
3.4.3 Click on the "Owner" tab.
3.4.4 Select a valid account (the one you're logged in under) under "Change Owner To".
3.4.5 Hit "OK".
3.4.6 Back on the main Permissions window, hit Add and add the same account as a valid user.
3.4.6.1 Where it says "Enter the object names to select", type in the account name, e.g. "Smith".
3.4.7 Click on the "Allow" checkboxes for "Full Control" and "Read".
3.4.8 Hit "OK".
3.5 Repeat procedure for the "iPodManager.1" key.
3.6 Now right-click and delete both of these keys.
I think that's all that's required, but I also searched through the registry and deleted the following keys.
4. Other keys I deleted:
4.1 HKEYCLASSESROOT --> IPodManager.IPodManagerUI.1
4.2 HKEYLOCALMACHINE --> SOFTWARE --> Apple Computer Inc. --> iPod
I think that's all I deleted, but I'm not positive. I seached for instances of "ipod" using the Find... and Find Next functions under the Edit menu.
5. Exit out of the registry editor.
6. Re-install iTunes. I re-installed iTunes and reconnected the iPod, and everything worked.
I want to repeat that editing the registry can completely mess up your computer if you modify the wrong things, so only do this if you're comfortable, and be extremely careful.
Hopefully this helps!
Apple support people: assuming this works, please add it to your solutions page, and feel free to reimburse me for spending half of Christmas figuring this out.
Mark

SOLUTION to "Software required for communicating with the iPod is not insta

Folks, I can not take credit for this.....you should send your checks to MarkinMadison. I've included his post in it's entirety. For me, this was the Holy Grail !!
My only comment is make sure when you are in the registry that you hit the "apply" button to change and add things.
This probably won't solve everyone's problem but it clearly solved mine (and I tried all other "solutions"), as well as Mark's.
Apple: please find out who MarkinMadison is and either cut him a big check or offer him free Ipods for life.
"Solution to "Software required for communicating with the iPod is not installed"!
I battled this same problem for about 5 hours. Going through re-installations, the "5 R's", all these discussion boards. Nothing worked.
The problem is that iPodService was repeatedly crashing after minute or so. You can verify this by hitting Ctrl-Alt-Delete and noting that iPodService is missing from the process list (sort by image name), or by right-clicking on My Computer and selecting "Manage", then going to Services and checking out the IPodService service - if it gives you the option to "Start", then it's not running.
Here is what worked.
1. De-install iTunes and iPod (if you have the updater installed) completely by going to Start --> Control Panel --> Add/Remove Programs. Also delete the C:\Program Files\iTunes and c:\Progam Files\iPod\bin directories. (Don't worry, this doesn't affect your saved music files.)
2. Log in as an Administrator
3. Go into the registry (note this is dangerous - you should be careful) and remove the iPod entries that the uninstaller misses.
3.1 Go to Start menu --> Run.
3.2 Type in "regedit".
3.3 Go to HKEYCLASSESROOT --> IPodService.iPodManager.
There are two keys here, iPodManager and iPodManager.1. In my case, I did not have permission to view either of these. I think this is the root cause of the problem. I think the installer can't properly update these because it doesn't have permission. So you need to change the permissions:
3.4 Right-click on IPodService.IPodManager
3.4.1 Select "Permissions..." A warning will appear saying you don't have permission, but that you can change permissions.
3.4.2 On the window that launches, click on "Advanced..."
3.4.3 Click on the "Owner" tab.
3.4.4 Select a valid account (the one you're logged in under) under "Change Owner To".
3.4.5 Click the checkbox that says: "Replace owner on subcontainers and objects."
3.4.5 Hit "OK".
3.4.6 Back on the main Permissions window, hit Add and add the same account as a valid user.
3.4.6.1 Where it says "Enter the object names to select", type in the account name, e.g. "Smith".
3.4.7 Click on the "Allow" checkboxes for "Full Control" and "Read".
3.4.8 Hit "OK".
3.5 Repeat procedure for the "iPodManager.1" key.
3.6 Now right-click and delete both of these keys.
3.7 If you can't delete, you might need to open up the keys and repeat the procedure on the sub-keys.
4. Exit out of the registry editor.
5. Re-install iTunes. I re-installed iTunes and reconnected the iPod, and everything worked.
I want to repeat that editing the registry can completely mess up your computer if you modify the wrong things, so only do this if you're comfortable, and be extremely careful.
Hopefully this helps!
Apple support people: assuming this works, please add it to your solutions page, and feel free to reimburse me for spending half of Christmas figuring this out.
Mark"
Dimension 4600 Windows XP

I have also posted the same question, earlier today. I purchased two for my children and cannot get the iPod to communicate with the computer. I have the iTunes software on my system, but during the installation process I cannot click the NEXT button, once I plug the iPod cable in. The computer does not detect it. I have tried all 6 USB 2.0 ports. I even removed the Dell Jukebox and MusicMatch programs. I am not a computer savvy person - just a mom who wants to give these to my children for Christmas. This is the first "chat" site I have even registered on. I am so very frustrated. Hopefully, this can be resolved.

TS1717 Having trouble running iTunes version 11.0.2 on a Dell Laptop running Windows 7 Professional Service Pack 1. Keep getting an error message "the software required for communicating with iPods and mobile phones was not installed correctly..." reinst

Having trouble when I launch iTunes (version 11.0.2) on my Dell Laptop running Windows 7 Professional (service pack 1). I get an error message indicating software required to communicate with iPod and mobile phones was not installed correctly. Do you want iTunes to try to repair this for you? I normally respond with OK and it immediately tells me "could not be repaired. Please reinstall iTunes..." I have done this a number of times to no avail.

I also notice Quicktime is not getting installed at all.
That one is normal nowadays (ever since the iTunes versions 10.5.x).
The software required for communicating with iPods and mobile phones was not installed correctly. Do you want iTunes to try to repair this for you?
Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
Does it install (or uninstall and then reinstall) properly for you?
If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.)

Error message: "the software required for communicating with Ipods and mobile phones was not installed correctly....

2 error messages when opening itunes: "The software required for communicating with Ipods and mobile phones was not installed correctly. Do you want Itunes to repair this for you?" When clicking yes another message indicates not able to remove services. Another message is: "Service (ipod service) could not be installed. Verify that you have sufficient privileges to install system sources." I've uninstalled all Apple services (itunes, quicktime, apple software update, apple mobiles devices support, bonjour and apple application support and reinstalled itunes/quicktime - no change in error messages. I cannot burn CDs using Itunes. This all seemed to happen when I updated itunes to version 10. I have a Windows 7 64-bit operating system on a Dell Inspiron Zino HD; the Itunes software is also 64 bit.

See the second box of Troubleshooting issues with iTunes for Windows updates.
tt2

EtreCheck version: 2.1.5 (108) Report generated 4 January 2015 14:29:26 GMT Click the [Support] links for help with non-Apple products. Click the [Details] links for more information about that line. Click the [Adware] links for help removing adware

My Mac is very slow and applications take a long time to load, especially Safari and iTunes. Please help.    I have run the Etrecheck report and these are results.
Thanks Pat
EtreCheck version: 2.1.5 (108)
Report generated 4 January 2015 14:29:26 GMT
Click the [Support] links for help with non-Apple products.
Click the [Details] links for more information about that line.
Click the [Adware] links for help removing adware.
Hardware Information: ℹ️
iMac (21.5-inch, Mid 2011) (Verified)
iMac - model: iMac12,1
1 2.7 GHz Intel Core i5 CPU: 4-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1333 MHz ok
BANK 1/DIMM0
2 GB DDR3 1333 MHz ok
BANK 0/DIMM1
empty empty empty empty
BANK 1/DIMM1
empty empty empty empty
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
AMD Radeon HD 6770M - VRAM: 512 MB
iMac 1920 x 1080
System Software: ℹ️
OS X 10.10.1 (14B25) - Uptime: 0:32:50
Disk Information: ℹ️
ST31000528AS disk0 : (1 TB)
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / : 999.35 GB (717.51 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
OPTIARC DVD RW AD-5690H
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Seagate Expansion Desk 2 TB
EFI (disk1s1) <not mounted> : 210 MB
Seagate Expansion Drive (disk1s2) /Volumes/Seagate Expansion Drive : 2.00 TB (1.66 TB free)
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. iPhone
Apple Internal Memory Card Reader
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Library/Application Support/Avast/components/fileshield/unsigned
[loaded] com.avast.AvastFileShield (2.1.0 - SDK 10.9) [Support]
/Library/Application Support/Avast/components/proxy/unsigned
[loaded] com.avast.PacketForwarder (2.0 - SDK 10.9) [Support]
Problem System Launch Agents: ℹ️
[failed] com.apple.syncservices.SyncServer.plist
Launch Agents: ℹ️
[loaded] com.avast.userinit.plist [Support]
[running] com.epson.Epson_Low_Ink_Reminder.launcher.plist [Support]
[loaded] com.epson.esua.launcher.plist [Support]
[running] com.epson.eventmanager.agent.plist [Support]
[loaded] com.oracle.java.Java-Updater.plist [Support]
[running] com.trusteer.rapport.rapportd.plist [Support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Support]
[loaded] com.avast.init.plist [Support]
[loaded] com.avast.uninstall.plist [Support]
[failed] com.avast.update.plist [Support]
[loaded] com.microsoft.office.licensing.helper.plist [Support]
[loaded] com.oracle.java.Helper-Tool.plist [Support]
[running] com.trusteer.rooks.rooksd.plist [Support]
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist [Support]
[invalid?] com.avast.home.userinit.plist [Support]
[running] com.microsoft.LaunchAgent.SyncServicesAgent.plist [Support]
User Login Items: ℹ️
iTunesHelper ApplicationHidden (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Internet Plug-ins: ℹ️
FlashPlayer-10.6: Version: 16.0.0.235 - SDK 10.6 [Support]
Default Browser: Version: 600 - SDK 10.10
AdobePDFViewerNPAPI: Version: 11.0.07 - SDK 10.6 [Support]
AdobePDFViewer: Version: 11.0.07 - SDK 10.6 [Support]
DivXBrowserPlugin: Version: 2.2 [Support]
Flash Player: Version: 16.0.0.235 - SDK 10.6 [Support]
OVSHelper: Version: 1.1 [Support]
QuickTime Plugin: Version: 7.7.3
JavaAppletPlugin: Version: Java 8 Update 25 Check version
Safari Extensions: ℹ️
wrc [Installed]
3rd Party Preference Panes: ℹ️
DivX [Support]
Flash Player [Support]
Flip4Mac WMV [Support]
GoToMyPC Preferences [Support]
Java [Support]
Trusteer Endpoint Protection [Support]
Time Machine: ℹ️
Skip System Files: NO
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 999.35 GB Disk used: 281.84 GB
Destinations:
Seagate Expansion Drive [Local]
Total size: 2.00 TB
Total number of backups: 78
Oldest backup: 2013-07-28 18:09:06 +0000
Last backup: 2015-01-04 14:29:38 +0000
Size of backup disk: Adequate
Backup size 2.00 TB > (Disk used 281.84 GB X 3)
Top Processes by CPU: ℹ️
      2% WindowServer
      1% mds
      0% fontd
      0% mds_stores
      0% com.avast.daemon
Top Processes by Memory: ℹ️
120 MB Safari
112 MB com.avast.daemon
94 MB com.apple.WebKit.WebContent
56 MB spindump
52 MB mds_stores
Virtual Memory Information: ℹ️
479 MB Free RAM
1.56 GB Active RAM
1.11 GB Inactive RAM
904 MB Wired RAM
5.37 GB Page-ins
75 MB Page-outs
Diagnostics Information: ℹ️
Jan 4, 2015, 01:57:18 PM Self test - passed
Standard users cannot read /Library/Logs/DiagnosticReports.
Run as an administrator account to see more information.

patbythesea wrote:
Can I assume that with my Mac I do not need any additional virus protection software? If I do, what should I use?
See my Mac Malware Guide for help on protecting yourself from malware. You generally don't need anti-virus software.
(Fair disclosure: I may receive compensation from links to my sites, TheSafeMac.com and AdwareMedic.com, in the form of buttons allowing for donations. Donations are not required to use my site or software.)

Advice required for dealing with a DC that has exceeded the tombstone lifetime (ID 2042)

Similar Messages

Maybe you are looking for